Related
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
They have these on Amazon for $10 less than the Seidio site. The case and clip combo, edited cause I didn't know if people may have thought it was just the case. Just ordered the black one. I was going to wait for the cheaper platinum branded one from Best Buy but it still shows backordered on their site. I had the same case for my Captivate and Inspire and really liked it. If you need a belt clip this is a great option.
http://www.amazon.com/gp/product/B006671MRG/ref=oh_o00_s00_i00_details
My seidio active just came in from amazon, love it, although I had to pay the full 30.
pics/review/thoughts of your active and surface cases?
I'm looking for something with at least decent drop protection. Looks like Otterbox commuter fits the bill but I thought the active looked a little snazzier.
Here's the best photos I could manage with my old LG Optimus Get ready for the long blocks of text.
Lots of pros: Case fits perfectly along with exoskeleton, no need to worry about it being loose. Makes the phone a lot easier to grip. I no longer have problems gripping the phone, in whatever position I may be standing/lying. Case made of top notch material. Exoskeleton is made to absorb shock when the phone is dropped on its corners and it seems like it does just that.
Camera is not impacted by the case at all, or at least to the point where I cant tell. Everything is cut perfectly, both on the inner shell and outer shell. Doesn't add a lot of bulk to the phone itself.
Have a problem with accidently pushing the volume buttons? Not anymore. The soft inner case is solid enough so that the volume buttons/power button (which are covered) only get pressed when you want to.
Loved the kickstand the first time I tried it. I believe it was made to lock in one position. At first, I thought it was dumb that they made the kickstand open so that the charger port was pointed down towards the table but you can just flip the phone 180 degrees and use the kickstand that way too! Should be all the viewing angles you need.
Cons: The hard exterior exoskeleton does not cover the top and bottom of the soft case. I did not get the holster with it so I do not know how the holster will affect the softer plastic but it seems extremely durable. Not sure how long the kickstand will last but seems well built so hopefully the entire lifespan of my phone. Another con is that the kickstand juts out of the case a millimeter or two so that when you have the phone flat on a table, it doesnt sit flat on its back.
Does attract a bit of lint but hardly noticeable unless under bright lights, which is how I took the pictures
Overall, very nice and durable case. Wish it was a bit cheaper than 30 dollars so if you can snag a sale, good for you! Highly recommended it. I didnt even know seidio existed before reading through these forums and looking at the opinions others gave them and I am glad I went with it! Let me know if you have any other questions.
I just got my surface case in today and it is exactly what I expected. I've had the same case on my Captivate and Inspire. There are other cases I like better but the clip is a necessity for me. Fits like a glove and doesn't add much bulk at all.
It adds a decent amount of protection but don't expect Otterbox Defender kind of protection. Though I have dropped my Captivate and Inspire numerous times with this case on and never had any damage.
Pics later when I get a chance.
Sent from my HTC PH39100 using XDA App
FYI I've had Seido Surface cases cause micro scratches on the plastic of phones before. Little pieces of dust/debris get stuck inside and the hard plastic of the phone causes it to scratch the plastic of the phone.
You can have this issue with any type of hard plastic case. I've seen it happen personally on the cheap generic Ebay cases and expensive Surface cases.
I've seen the build up but not scratches in the 3 that I have owned. But I'm also not looking for it either as I don't care if the plastic gets scratched up. I just need something with a belt clip that doesn't add much bulk and gives some protection in case of a drop.
Sent from my HTC PH39100 using XDA App
Really torn right now between purchasing the Commuter case from Otterbox or picking up one of the UAG cases for my note 2. I see that the Otterbox offers a two layer case vs the UAG single layer. Also the Commuter has covers for the ports and the UAG does not. Also for those that do own either or both, which do you orefer and why?
Sent from my SCH-I605 using Tapatalk 2
2 layers or a single molded layer - both offer very similar level of protection. I played with Commuter, but pass on it. Using UAG now. Too many advantages over Commuter. The back is less slippery, and has standoff "feet" to create friction with a surface; Commuter is easier to accidentally push/slide off the table with slippery surface (like grass top or granite). Also feels less slippery in my hand (UAG that is). One piece is a lot easier to take off if you need to change battery or remove card. Design of volume/power buttons is better and more responsive, like an external hardware buttons. It's lighter. Better design, looks a lot cooler and has customizable vent inserts. Don't care much about port plugs since I use my phone as GPS on a charger in a car and having micro-usb port cover is PITA. I feel Commuter inner rubber shell will get loose with time, already noticed pull around volume buttons where the rubber part was looser.
Honestly i was pulling towards the uag but i couldnt risk an wait for it to show up so just said buck it an got a commuter.. So far ive been realy happy with it. Size is good gives me a better grasp. A tad slippery but i got used to it now an got my way of holding it. Lip size around the edges is nice too realy would help incase phone fell screen down. Also comes with its own screen protector wich i botched the install since i suck at putting those on. An the biggest of all my conserns was the push buttons. On most of my cases on my old gs2 they were hard to push an this case there just rite.. not to soft nor to hard at all realy just perfect pressure to press. Better then my exs gs3 commuter wich is hard as shat to press the volume or power. I wouldnt put up with it if it was like that on mine.
I give it a 9/10. An only for the color choices aint the best style combinations that they coulda use but oh well not a deal breaker
sent from my Cricket Note 2
Loved my s3 commuter but the note 2 version is now in the trash. That thing was a terrible fit and gradually got worse. Had a replacement that was the exact same. UAG looks like the clear winner right now. I will buy once the crazy pricing goes down.
Sent from my SCH-I605 using xda app-developers app
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
I have to go with the commuter here. Some of the previous reviews have pointed out that the back is slippery. While I would agree, I also think that is not too slippery, and it is much easier to put in and take out of pockets than the UAG. Also, the biggest thing that I disliked about the UAG besides the lack of port covers, was that it just felt awkward in my hand. The commuter is much nicer to hold IMO. Also my UAG case was less than snug, it just felt like the phone wasn't secure. Also, the Commuter I think offers superior protection. Just check out this video. The Commuter, for all realistic purposes, does protects the phone just as much as the defender (which I also have). I think the commuter is the clear winner here.
Also, for what it's worth, Otterbox is the best mobile accessory company out there. Their customer service is quick & friendly. I have contacted them through both phone and email, and I have never received any service less than stellar, unlike my experience with UAG. I preordered my UAG case and was shocked at how little contact UAG had with me, as a preorder customer, especially considering how long the case was delayed.
My commuter also bent my charging port with its stiff port cover. Had to cut it off after my phone was replaced and then the left side of the phone began popping out. The Otter box hit the trash immediately.
Sent from my SCH-I605 using xda app-developers app
I loved my commuter when I first got it but now I hate it. The silicone is made out of cheap material, two weeks old and it's already tearing. The back is very slippery. I sometimes have trouble fitting my usb plug into the slot because the silicone gets in the way. Haven't had the usb bend yet as some have reported. The headphone jack on the commuter is not big enough for some of the plugs I use. I order the UAG case and it will be in tomorrow. I had the UAG on my S3 and I know what a terrific case it is. When my UAG comes in I'm throwing the commuter away.
I have had a commuter, a few other cases, and the UAG.
The Uag was my clear favorite. It is slim enough, but offer comparable protection to the commuter. The commuter was just too heavy and thick. The Uag is slimmer, and noticeably lighter.
I'd recommend Uag over the computer with out pause... Build, looks, and overall quality. But that is simply my opinion and nothing more.
I had seidio active... The magnet kickstand messed up the stylus.
I had a incipio dual pro shine. Great case that added protection, but not as much as the two you listed above. It so scratched so easy and looked like horrible in a week.
The Uag is my final case I believe. If your not sold on either, look into the trident aegis. I oersonslly don't like the way it looks, not even a little bit. But it is getting g great reviews by people here and the people who own it seem to prefer it. Maybe it looks better in person.
Sent from my SPH-L900 using Tapatalk 2
jbreeze228 said:
The silicone is made out of cheap material, two weeks old and it's already tearing.
Click to expand...
Click to collapse
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
AlphaNoble said:
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
Click to expand...
Click to collapse
Lmao. Nicely done sir.
Sent from my SGH-T889 using Tapatalk 2
Anyone know if UAG Allows wireless charging or does it affect it?
So I settled on the commuter case and have got to say I am pretty happy with it. Doesn't make the phone all that much bigger and having the port covers is a plus. Although we will see I'm pretty sure I will end up getting the UAG case as well so I can try them both out.
Sent from my SCH-I605 using Tapatalk 2
Literally just got my UAG case in and it was effing awesome! It's so easy to hold and grip versus the commuter I was scared would fall out of my hands because it was so slippery. The buttons are a lot easier to push. Love how you can change the vent colors but rockin the orange for now. The only area the Otterbox wins in is the size of the spen cut out. Other than that there is no comparison between these two. Don't see myself using any other case. Great job UAG.
Sent from my SGH-T889 using Tapatalk 2
chodie said:
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
Click to expand...
Click to collapse
Please let us know how it goes with the MIME glass screen protector.
I have both cases and must say UAG wins. Top it off with mime, excellent product with outstanding support
Sent from my GT-N7105 using xda premium
P
Sent from my HTC One using Tapatalk
UAG is very light and is easy to put on or take off. It has military standard drop. Heat vents keep your phone cool. Easy to hold. Looks good if you like the rugged look. Last a long time. I have a uag case from 4 years ago that still looks great today.
Sawdust in your port
Covered ports may seem unnecessary, but when I was working at radioshack, an old man came in and said his phone wasn't charging right. I assumed it was the cord (because that is the case 9 times out of 10), but the cable was perfectly fine. I then checked the USB port, and it looked like someone shoved white playdough in the port and shoved it down. As I pick it out, I discover it was sawdust that was left in there and shoved down over time. The phone worked fine after that.
My sister got one HTC One M8 case one month ago. She really love it,it's awesome fast.Her birthday is coming, i consider buy one phone case for her because i always hearing her complaining about the slippery metal case.
I looked through many cases and chose 3 cases from 3 different shops. My final choice based on Price,Quality,Slippery Resistant. Now i am confused ... Guys，what is your opinion，which one would be best gifts? (PS: MY SISTER LOVES CARTOON)
Adventure Time Custom Hard Plastic Case! http://www.casecoco.com/shop/adventure-time-htc-one-m8-cases-8734-165
Ultra Thin Luxury Carbon Fiber Hard Case! http://www.ebay.com/itm/Ultra-Thin-...AU_MobilePhoneAccessories&hash=item3a9503aa05
Hybrid Protective Case! http://www.amazon.com/SUPCASE-All-N...id=1407221344&sr=8-1&keywords=HTC+One+M8+case
The Adventure Time one is too cool.
Cases
I got the Carbon Fiber on and it is junk. No protection for screen as it has not lip on front. I also think it caused a scratch near the screen as it is hard plastic. It is also hard to get off once it is on.
I just got the Spigen clear case off of Amazon and it is great. Good protection without too much bulk. Clear also shows the nice aluminum back of the phone. Came in around $17.00 with shipping. Highly recommend.
http://www.amazon.com/gp/product/B00IF5B218/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
e07015 said:
I got the Carbon Fiber on and it is junk. No protection for screen as it has not lip on front. I also think it caused a scratch near the screen as it is hard plastic. It is also hard to get off once it is on.
I just got the Spigen clear case off of Amazon and it is great. Good protection without too much bulk. Clear also shows the nice aluminum back of the phone. Came in around $17.00 with shipping. Highly recommend.
http://www.amazon.com/gp/product/B00IF5B218/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I don't wanna derail this discussion too much, but I was kinda interested in that Carbon Fiber one. I don't care about protection really, I just want something for grip. Is it grippy or is the carbon fibre look just for show? Also on the pictures it looks kinda thick (looking at the area around the main camera)..can you confirm this? Thanks
WarCow said:
I don't wanna derail this discussion too much, but I was kinda interested in that Carbon Fiber one. I don't care about protection really, I just want something for grip. Is it grippy or is the carbon fibre look just for show? Also on the pictures it looks kinda thick (looking at the area around the main camera)..can you confirm this? Thanks
Click to expand...
Click to collapse
It is hard plastic. It is not too thick and the sides are prettty thin. It is probably better grip than naked.
Again, I would not recommend as I feel it scratched the phone. I thought the screeen glass was scraped but I think it is the gasket between the phone and glass. It is a very tight fit and the plastic has very little give.
There are many other cases out there so I would recommend staying away from this one.
WarCow said:
I don't wanna derail this discussion too much, but I was kinda interested in that Carbon Fiber one. I don't care about protection really, I just want something for grip. Is it grippy or is the carbon fibre look just for show? Also on the pictures it looks kinda thick (looking at the area around the main camera)..can you confirm this? Thanks
Click to expand...
Click to collapse
Go for the Bear Motion Sand case.
http://www.amazon.com/Bear-Motion-H...280&sr=8-1-spell&keywords=bear+motion+sand+m8
Not much in the way of protection for the screen as there is barely any lip, but it makes the phone soooo much easier to hold. Its only like $7 bucks on Amazon. Its super grippy since it has a sandpaper-y type texture on the back. Feels and looks great.
Get the unicorn beetle supcase. The design of this phone is what separates it from the rest and I just cannot understand why one would want to put it in a case that will cover up the beautiful metal back of the phone. I have the supcase and love it.
PROS:
1) Good fit. Case fits phone like a bodysuit yet still allows for easy removal due to the softer and flexible rubber material around the lips.
2) Good quality. All cutouts(including the one for the tiny mic on the back) are precise and spot on.
3) IR Blaster feature on phone works with this case.
4) Case does not make phone look bulky. Phone still looks thin and sleek even with the case on.
5) Good value and great case for the price.
CONS:
Back is frosted/opaque, not clear but still allows the back to show through.
I think so
Your words are quite useful!!!But i still want to ask if they have supcase central part is clear ?
jwsm said:
Get the unicorn beetle supcase. The design of this phone is what separates it from the rest and I just cannot understand why one would want to put it in a case that will cover up the beautiful metal back of the phone. I have the supcase and love it.
Click to expand...
Click to collapse
Completely agree..however, was thinking of getting one of these wireless charging pads for the phone..the spigen clear case I currently have would look real ugly with the ccharging coil showing.. same goes for the suoacase, otherwise, it looks quite nice.
One more question!
jwsm said:
Get the unicorn beetle supcase. The design of this phone is what separates it from the rest and I just cannot understand why one would want to put it in a case that will cover up the beautiful metal back of the phone. I have the supcase and love it.
PROS:
1) Good fit. Case fits phone like a bodysuit yet still allows for easy removal due to the softer and flexible rubber material around the lips.
2) Good quality. All cutouts(including the one for the tiny mic on the back) are precise and spot on.
3) IR Blaster feature on phone works with this case.
4) Case does not make phone look bulky. Phone still looks thin and sleek even with the case on.
5) Good value and great case for the price.
CONS:
Back is frosted/opaque, not clear but still allows the back to show through.
Click to expand...
Click to collapse
Your words are quite useful!!!But i still want to ask if they have supcase central part is clear ?
CarsonTiffany said:
Your words are quite useful!!!But i still want to ask if they have supcase central part is clear ?
Click to expand...
Click to collapse
Clear Supcase
First one would be best,more choice and more surprise
Loving those adventure time cases (I'm a fan myself haha). Definitely get one of those for your sister!
So have you made the final decision? if not, i recommend the wallet case cover. it can protect your sister's whole phone,both the back and the screen.:good:
M8 Case with stand
I bought one M8 Duo Armor GREEN for HTC One (M8) Combo Case with Stand and Holster from Amazon. The case protects my phone well, easy to grip and can stand on desktop for video watching. The case is quite multifunctional. And only sell $7.94.::good:
The Otter Box is the best case for the phone.
Fait Accompli
HTC one m8 Cases
When you are buying phone HTC one m8 they usually offer you the dot view case at the ATT, but the price is little too high, so I got some good and I would say cheap deal on Casezz.com and shipping is free.
Best Case
That SUPCASE on Amazon looks pretty sweet.. It has a ton of positive reviews as well.
My vote goes to the SUPCASE but if your sister likes cartoons one from the first link has got to be the way to go for kudos.
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case
PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks
magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.
Samsung OEM silicon. Can confirm it has excellent grip
seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.
zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.
I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.
Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.