【PORT】【ROM】【Gionee M2】★★MIUI★★
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Code:
#include /*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Installation:
Enter CTR Recovery
Take A BackUp of the current ROM you are using.
Now, Wipe Data/Factory Reset.
Wipe Dalvik Cache Advanced Options
Flash the rom
Flash gapps
reboot and enjoy
DOWNLOAD LINK
HTML:
https://drive.google.com/file/d/0BxU9whdfpASRY0NYS0pRR0lOX0U/edit?usp=sharing
Click to expand...
Click to collapse
Note:-
This is still in Beta Phase but i have tried my best to check/test the ROM but still don't expect it to be a bugless ROM though it is good enough to use as a daily driver
Click to expand...
Click to collapse
IF YOU LIKE MY WORK DON'T SAY JUST PRESS THANKS BUTTON
reserved for changelog
Are you going to update every week with MIUI release?
I can help you if you want to upload.
thanks bro .. rom have few problem like cant switch 3g but everything working fine btw do you try it ?
sending from gionee m2
Yes, I have installed your ROM 2 week back and on 25th April I got update notification.
On selecting update, it downloaded ROM in "downloaded_rom" folder, further analysis lead me that it was ported from Gfive A800.
I have copied App, System, Data, few other folders on your miui.zip and also update build.prop file.
Yes, in setting Network type is disabled but if you add shortcut in notification bar to turn 3g/2g then on click of that you will get option to turn on 3G.
rajeshjamnadas said:
Yes, I have installed your ROM 2 week back and on 25th April I got update notification.
On selecting update, it downloaded ROM in "downloaded_rom" folder, further analysis lead me that it was ported from Gfive A800.
I have copied App, System, Data, few other folders on your miui.zip and also update build.prop file.
Yes, in setting Network type is disabled but if you add shortcut in notification bar to turn 3g/2g then on click of that you will get option to turn on 3G.
Click to expand...
Click to collapse
Didnt work. can't add the 2G/3G toggle
---------- Post added at 01:01 AM ---------- Previous post was at 12:22 AM ----------
Can you add the link to the Gapps file?
Everyone Check This
Discussion And Development Thread For Gionee M2
http://forum.xda-developers.com/showthread.php?p=52846249
Just follow this link to update weekly.
http://forum.miui.co.in/viewtopic.php?f=39&t=527
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
For 2G 3G toggle
Go to Dialer and type*#*#4636#*#*. If a Pop Up appears go to Phone Information and choose your preferred network type.
helloansuman said:
Just follow this link to update weekly.
http://forum.miui.co.in/viewtopic.php?f=39&t=527
---------- Post added at 08:54 PM ---------- Previous post was at 08:52 PM ----------
For 2G 3G toggle
Go to Dialer and type*#*#4636#*#*. If a Pop Up appears go to Phone Information and choose your preferred network type.
Click to expand...
Click to collapse
Thanks Ansuman! Its really great for u to post and update for our devices!
Sent from my MIUI using XDA Premium 4 mobile app
welcome brother
Double Sim
Please can someone confirm is double sim is working in this rom, and what about both front and back camera? Thanks in advance
All are working!
Sent from my MIUI using XDA Premium 4 mobile app
any bugs in this rom?
I can't turn on 3g in this. Any idea anyone?
Sent from my M2 using XDA Premium 4 mobile app
what about USB otg pen drive mounting?
Sent from my GT-P3100 using XDA Free mobile app
Hey Bro,
Android Lollipop official update(stock Android ) is available for micromax unite 2. So plz you can port this rom to our GIONEE M2 device...the iformation about rom link is available blow.....
http://forum.xda-developers.com/andr...ite-2-t3056449:o:o:o:o:o:(:(:(
Related
CM9 Update 2013/01/06 kernel 2.6.35.7
ported from triumph by g60madman
=================================
Update v2
CM9-MTDEV-20130123_FB0-v2
** Gapps Included
** New Driver for adreno
-- please format/wipe all
--- format cache, data, system
--- wipe dalvik cache and wipe battery
=================================
Update v1 (d-h.st file hosting)
CM9-MTDEV-20130123_FB0-v1
Mediafire
CM9-MTDEV-20130123_FB0-v1
* for random soft key instal this file
http://www.mediafire.com/download.php?a74fwtxk20qz88a
=================================
1. CM-MTDEV9-2013-01-06(kernel.2.6.35.7)
2. GAPPS ICS
1. Wipe all data and dalvik cache
2. Install Rom and reboot
3. Install Gapps and reboot
* use MXCamera from market for better quality (set to 640x480 res for camcorder)
* i try fix from original kernel (2.6.32.59) but i have problem for ril data
* for original rom (2.6.32.59) download it from here CM-MTDEV9 by g60madman
downloading for testing hopefully serve all apis and has no problems with facebook, waze, or tethering all previous roms had these problems.
Great gundul46,i will try sunday...
Teruskan perjuanganmu kawan,salam anonymous indonesia
Sent from my A99 using xda app-developers app
---------- Post added at 06:52 PM ---------- Previous post was at 06:48 PM ----------
Try other download server bro,in my office blocked,try upload in d-h.st bro...
Sent from my A99 using xda app-developers app
Comments so far:
* Using the WiFi Tether application has no connection either with the native.
* Wired Tether application using the USB connection it is EXCELLENT.
* Does not serve the application Waze.
* The Facebook application does not work.
TheMasterMindGT said:
Comments so far:
* Using the WiFi Tether application has no connection either with the native.
* Wired Tether application using the USB connection it is EXCELLENT.
* Does not serve the application Waze.
* The Facebook application does not work.
Click to expand...
Click to collapse
Facebook is work for me.:cyclops:
To open blocked website, try opened by web proxy. Like this
Sent from my FIH-FBO using xda app-developers app
TheMasterMindGT said:
Comments so far:
* Using the WiFi Tether application has no connection either with the native.
* Wired Tether application using the USB connection it is EXCELLENT.
* Does not serve the application Waze.
* The Facebook application does not work.
Click to expand...
Click to collapse
Yes.. wifi tethering still doesn't work, but Facebook apps work fine for me, every using it seems no white screen
Sent from my FIH-FBO using xda app-developers app
my experience is not pleasant ....
touchscreen didn't work... need to flash different kernel
getting very hot with 3G
two reboot
although not using WiFi, SOD like situation arises ... pulled out battery & restarted
still on the same, will report same if face anything apart from these ...
Edit : by using CK's kernel, able to reduce temp of my device
no reboot after that
so far getting good feel of ICS
main problem with other ICS was white screen issue on email, gmail and facebook, which I didn't observe on this.....
@ Tanuj, you can use this ROM as base ROM for porting MIUI ICS if you are attempting that ....
anyway I am planning to use built prop by Elol in his MT Dev port, just get jelly bean like status bar and notification drawer
vivekb said:
my experience is not pleasant ....
touchscreen didn't work... need to flash different kernel
getting very hot with 3G
two reboot
although not using WiFi, SOD like situation arises ... pulled out battery & restarted
still on the same, will report same if face anything apart from these ...
Edit : by using CK's kernel, able to reduce temp of my device
no reboot after that
so far getting good feel of ICS
main problem with other ICS was white screen issue on email, gmail and facebook, which I didn't observe on this.....
@ Tanuj, you can use this ROM as base ROM for porting MIUI ICS if you are attempting that ....
anyway I am planning to use built prop by Elol in his MT Dev port, just get jelly bean like status bar and notification drawer
Click to expand...
Click to collapse
After a blackscreen my X6 is Bricked
when i also installed this rom the touch wasn't working but when i flash a different kernel it works very nice.
badtreep said:
when i also installed this rom the touch wasn't working but when i flash a different kernel it works very nice.
Click to expand...
Click to collapse
Yes you can use CK-kernel for fix to other fb0 devices
Sent from my AXIOO-VIGO410 using xda app-developers app
ryo2456 said:
After a blackscreen my X6 is Bricked
Click to expand...
Click to collapse
mattBLK said:
Click to expand...
Click to collapse
sad but true, and the camera is always said "cannot connect the camera" before my phone is brick
ryo2456 said:
sad but true, and the camera is always said "cannot connect the camera" before my phone is brick
Click to expand...
Click to collapse
sorry to hear your loss... have you tried pressing power+volume up for download mode then flashing stock rom via SUTLR ? these X6 are very hard to brick
^
Agree with mattBLK
X6 is very hard to brick ... Try to flash it with SUT LR, you will get your device back .....
mattBLK said:
sorry to hear your loss... have you tried pressing power+volume up for download mode then flashing stock rom via SUTLR ? these X6 are very hard to brick
Click to expand...
Click to collapse
I have tried this, but it has no response.
Maybe MTDEV kernel 2.6.32.59 more stable than our,is it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
ryo2456 said:
I have tried this, but it has no response.
Click to expand...
Click to collapse
Go to service center bro,,I have bricked my device several months,just red LED when charging
As vivek said,,FB0 very hard got bricked,,
Sent from my Xperia X using Tapatalk 2
Arya_3RDNumber said:
Maybe MTDEV kernel 2.6.32.59 more stable than our,is it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
Go to service center bro,,I have bricked my device several months,just red LED when charging
As vivek said,,FB0 very hard got bricked,,
Sent from my Xperia X using Tapatalk 2
Click to expand...
Click to collapse
I know , but NO LED when charging.
any alternative application that can scan qr codes?
Update is coming soon,
Fixed
Camcorder + camera (included stock or other camera apps)
Kernel using CK-kernel
Network (indonesian)
Very stable
Sent from my Vigo410 using xda app-developers app
This is Cyanogenmod 10.1 for desire C
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
How to install?
Do a FULL WIPE first. Full Wipe means format /system, /data, /cache.
Now flash ROM and then GAPPS through recovery.
After flashing, do NOT reboot phone. Instead POWER OFF the device and boot to bootloader.
Extract the boot.img from rom and flash it using fastboot flash boot boot.img command.
Reboot.
Download Links:
ROM
gapps
Credits:
@Jelly Android
@cute_prince
@dominos_liberty
@penguin449
@for811
any one else? just pm me
reserved
Hello
download link with @Jelly Android *updater-script are up
Testing now
Sent from my HTC Desire C using xda premium
Can you give me bug list too?
dominos_liberty said:
Can you give me bug list too?
Click to expand...
Click to collapse
Course just downloading
---------- Post added at 11:25 PM ---------- Previous post was at 11:03 PM ----------
Shad0wPanda said:
Course just downloading
Click to expand...
Click to collapse
Sorry about this im having trouble flashing boot.img
---------- Post added at 11:39 PM ---------- Previous post was at 11:25 PM ----------
@dominos_liberty
Cant boot stuck on white htc screen shomething wrong with kernel.
hahaha me too i finished my build this morning x) i will test your build and mine and compare bug
for811 said:
hahaha me too i finished my build this morning x) i will test your build and mine and compare bug
Click to expand...
Click to collapse
please can i have some help
Shad0wPanda said:
Course just downloading
---------- Post added at 11:25 PM ---------- Previous post was at 11:03 PM ----------
Sorry about this im having trouble flashing boot.img
---------- Post added at 11:39 PM ---------- Previous post was at 11:25 PM ----------
@dominos_liberty
Cant boot stuck on white htc screen shomething wrong with kernel.
Click to expand...
Click to collapse
You can consult android jelly on how he got booting,
since this rom is not booting I'm requesting moderator on closing this thread, ones android jelly share his build we'll reopen this till then we discuss in the thread in general
dominos_liberty said:
You can consult android jelly on how he got booting,
since this rom is not booting I'm requesting moderator on closing this thread, ones android jelly share his build we'll reopen this till then we discuss in the thread in general
Click to expand...
Click to collapse
Do you think you could me with a porting problem? Please
Shad0wPanda said:
Do you think you could me with a porting problem? Please
Click to expand...
Click to collapse
pm me ur problem
Finally guys we got cm10.1 booting on desire C confirmed by @for811 cheers
download links are on op for those who wants some experimentation
for now there are too many force closes but they will be solved
for811 said:
[/COLOR]
i have goud news for you!! its boot!
but all proces is stoped and it reboot
Click to expand...
Click to collapse
the most important for the moment is to solve all force close process, because the rom reboot about 1min...
I think I know why its happening, can u flash cm10 boot image and see if it boots or not?
We cute_prince were also reset every 1 minute, like he did to fix BoardConfig.mk :cyclops:
saider said:
We cute_prince were also reset every 1 minute, like he did to fix BoardConfig.mk :cyclops:
Click to expand...
Click to collapse
its restting because I forgot to update some video files, I'm publishing a new built and I'm sure it will not reset. And yes one more good news for u guys, your old kernel did not had ion support for graphics where as this kernel does
Testers: here is the link of new build, please report ASAP, http://www.mediafire.com/download/tx0rotc92pxyhxy/cm-10.1-20130620-UNOFFICIAL-golfu-build2.zip
dominos_liberty said:
its restting because I forgot to update some video files, I'm publishing a new built and I'm sure it will not reset. And yes one more good news for u guys, your old kernel did not had ion support for graphics where as this kernel does
Testers: here is the link of new build, please report ASAP, http://www.mediafire.com/download/tx0rotc92pxyhxy/cm-10.1-20130620-UNOFFICIAL-golfu-build2.zip
Click to expand...
Click to collapse
i have reboots
what about force closes? and logcat if possible
Downloading....
EDIT: someone upload it to a faster site?
EDIT2: still getting force close (and reboot)
CyanogenMod is a free, community built distribution of Android 4.3 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
{T}[DEVELOPMENT] - CM11 - Android 4.4 - FreeXperia Project , a ROM for the Sony Xperia T
Contributors
FXP, kali
Version Information
Status: Testing
Created 2013-11-24
Last Updated 2013-11-24
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Good luck, maybe CM11 nightly will boot when they come out
CM10.2 not booting from 11/11 ...
Sent from my Xperia T using XDA Premium 4 mobile app
Many lags and no sounds
so far so good with FXP247
iliasr21 said:
so far so good with FXP247
Click to expand...
Click to collapse
Could you be more specific
awesome rom (FXP247) but i have 1 problem
I cant change the keyboard
but after flashing pa gapps its fixed
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
adiq_ambro said:
Could you be more specific
Click to expand...
Click to collapse
stable enough for daily use
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
Mahthenewgamer1998 said:
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
Click to expand...
Click to collapse
yes i think its better.
iliasr21 said:
stable enough for daily use
---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------
yes i think its better.
Click to expand...
Click to collapse
Is it better in terms of features? Performance?
_Raziel666 said:
Is it better in terms of features? Performance?
Click to expand...
Click to collapse
has more features in launcher, performance is good but the only problem is that ART does not work so good as tilal's.
iliasr21 said:
has more features in launcher, performance is good but the only problem is that ART does not work so good as tilal's.
Click to expand...
Click to collapse
I don't think that by having more features in launcher, qualifies as 'better'. The majority that installs a custom ROM like CM or Omni or... usually installs a third party launcher as well. And if you consider that ART is not working as well as on Omni, I wonder if one can say that CM is better at this point.
Just my 2c...
i cant connect to wifi, it says "association rejected"
any help?
edit:
i managed to fix this, changed the wireless security from WPA to WPA2
_Raziel666 said:
I don't think that by having more features in launcher, qualifies as 'better'. The majority that installs a custom ROM like CM or Omni or... usually installs a third party launcher as well. And if you consider that ART is not working as well as on Omni, I wonder if one can say that CM is better at this point.
Just my 2c...
Click to expand...
Click to collapse
more space in my ram. ART uses a lot of space and my apps in sd card always disappeared after reboot. no problem with that now and i have no blue screens also.
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
iliasr21 said:
more space in my ram. ART uses a lot of space and my apps in sd card always disappeared after reboot. no problem with that now and i have no blue screens also.
Click to expand...
Click to collapse
There is no fix for blue screens that I've seen until now. They might be less or more frequent between ROMs but that's just because its random.
The apps disappearing issue should be fixed in the next build on omni.
Sent from my Xperia T using Tapatalk
Mahthenewgamer1998 said:
Does everything work on FXP 247??
Does it better and more stable than tilal's omni rom 4.4???
didn't you get blue screen??
Click to expand...
Click to collapse
yes its stable than tilal's omni rom 4.4
no blue screen for now
r-l said:
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
very good sound and phone calls are fine, the link is in the fist post
tilal6991 said:
There is no fix for blue screens that I've seen until now. They might be less or more frequent between ROMs but that's just because its random.
The apps disappearing issue should be fixed in the next build on omni.
Sent from my Xperia T using Tapatalk
Click to expand...
Click to collapse
waiting
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
r-l said:
How is the audio volume and where can i found the download link (fxp247)
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://uploaded.net/file/3l0h2tdf/from/80a03i
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Notes:
You need to install Gapps for ARM SDK 23 (Android 6.0) - check Open Gapps!
You can install Xposed framework for ARM SDK 23 (Android 6.0) from here.
Backup your external SD data to format and set it up as portable or internal storage.
You may use Kernel Adiutor to tweak the kernel.
You may want to change animation scales in Settings / Developer options.
You may want to enable Multi-window mode in Settings / Developer options.
To use Multi-window mode, press the symbol next to "X" in "recent apps".
Click to expand...
Click to collapse
Build Tags:
To avoid confusion with the OFFICIAL CyanogenMod build tags that include Nightly/Developement (every 24 hours, experimental, newest features, unstable) and Snapshot/Release (every 1-2 months, suitable for daily use, devices signed-off by maintainers for inclusion), these UNOFFICIAL builds have two tags:
TESTING: include experimental changes to be evaluated and to possibly fix some issues
may be used as daily driver only if they don't break functionality or introduce new issues.
STABLE: include tested changes and confirmed bug fixes
are suitable for daily use.
Click to expand...
Click to collapse
Installation instructions:
Hit THANKS
Make backup
Do a full factory reset
Flash ROM + Gapps
Enjoy!
Click to expand...
Click to collapse
Downloads:
UNOFFICIAL CyanogenMod 13.0 Builds for Verizon Samsung Galaxy Note 4 (SM-N910V)
Click to expand...
Click to collapse
Known Issues:
Every non-trivial program has at least one bug.
Click to expand...
Click to collapse
.
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910VVRU2CPD1/N910VVRU2CPF3
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 13.0-20160724
Stable Release Date: 2016-07-24
Current Beta Version: 13.0-20160919
Beta Release Date: 2016-09-19
Created 2015-11-21
Last Updated 2016-11-06
Reserved
Reserved #1
Reserved #2
Reserved #3
Unbelievable!!! Thank you. I've been on your aicp build since it came out, and have been looking forward to this.
gcounts said:
Unbelievable!!! Thank you. I've been on your aicp build since it came out, and have been looking forward to this.
Click to expand...
Click to collapse
You're welcome! OP updated... initial version is live now!
Awesome work man! Thank you for the build. I'm about to give it a go.
Have it loaded, and themed. Its running great, a couple settings FC's, probably theme related. Smooth and fast. Thanks again
jal3223 said:
Awesome work man! Thank you for the build. I'm about to give it a go.
Click to expand...
Click to collapse
Good luck!
gcounts said:
Have it loaded, and themed. Its running great, a couple settings FC's, probably theme related. Smooth and fast. Thanks again
Click to expand...
Click to collapse
Don't install themes for previous versions of CM (may cause SystemUI or Settings FCs)! CM 13 is still under development and many resources are missing.
hsbadr said:
Good luck!
Don't install themes for previous versions of CM (may cause SystemUI or Settings FCs)! CM 13 is still under development and many resources are missing.
Click to expand...
Click to collapse
No... I didn't . I have a cm13 theme installed. Thanks for the heads up.
Ok, I just want to make sure I can install this on the developer edition Verizon Note 4. I just got one. It's already rooted with recovery. Thanks.
It's BOF1.
Sent from my SM-N910V using XDA Free mobile app
Running great! Does the quick charge work with cyn? Anyway to add the verizon voicemail app?
Sent from my SM-N910V using Tapatalk
scottsdca said:
Ok, I just want to make sure I can install this on the developer edition Verizon Note 4. I just got one. It's already rooted with recovery. Thanks.
It's BOF1.
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
OP states must be on BOG5
---------- Post added at 09:15 PM ---------- Previous post was at 09:10 PM ----------
Go here:
http://forum.xda-developers.com/showthread.php?t=3178148
So I can flash that?
Sent from my SM-N910V using XDA Free mobile app
scottsdca said:
So I can flash that?
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
Yes. Follow the instructions in the op and special instructions for dev ed
---------- Post added at 06:45 AM ---------- Previous post was at 06:41 AM ----------
Thank You! Backing up and going to run it... Don't really use Finger print reader or NFC. Donation will be made your way HSBADR when I get on the computer this afternoon.....
Anyone having issues sending /receiving text messages?
Sent from my SM-N910V using Tapatalk
jbombs16 said:
Anyone having issues sending /receiving text messages?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
I use hangouts, and I can receive texts, but when I send it says "message not sent" even though it does send the text. MMS works fine.
No, mine is working fine so far
Sent from my SM-N910V using Tapatalk
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
Great Job.
Sent from my SM-N910V using Tapatalk
LIQUID REMIX
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Liquid Remix ROM unofficial based on Android pie (9.0)
Kernel Source :- https://github.com/Iscle/pie_kernel_xiaomi_oxygen
Build by :- @theglitchh
GitHub profile :- https://GitHub.com/TheGlitchh
Telegram username :- https://t.me/TheGlitchh
Special thanks to @Hard_Rock83 for trees and for the hardwork
Note :- As it's the initial build of pie ROM for mi max 2 things can be a little buggy , so I would be grateful if you share the logs to my Telegram account as the username is mentioned above.
Rom download link :- https://drive.google.com/file/d/1z8zLt1U57AoELViOAAqf83t9kVpSbRZz/view?usp=drivesdk
Use treble twrp uploaded by @Hard_Rock83 for mi max 2
======= O =======
awesome :highfive:
reversegear said:
awesome :highfive:
Click to expand...
Click to collapse
have u tested it?
@theglitchh what should i use? non treble twrp? thanks
POPiO. said:
have u tested it?
@theglitchh what should i use? non treble twrp? thanks
Click to expand...
Click to collapse
Downloading.. treble twrp get it form arrow rom thread.
Let's write more notes, handsome boy.
---------- Post added at 01:40 PM ---------- Previous post was at 01:10 PM ----------
This version is still very streamlined，There are no Chinese in many places，It's difficult for me to use this level of people.Because I didn't go to university in China.Besides, why not install the keyboard? I can't enter the WiFi password. I want to connect to the computer and install the input method first.
very good =).
the only problem I saw was the lack of the keyboard itself.
and the volume in calls (which has in all roms)
(google translator)
some screenshots to the rom customizations in settings, please
Great, will try tomorrow, my favorite ROM. Thanks .
Ahh nice,,will try next time,,thanks for raining pie rom
sweet subbed and will add to the index soon
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
POPiO. said:
have u tested it?
@theglitchh what should i use? non treble twrp? thanks
Click to expand...
Click to collapse
Treble twrp build by hardrock as mentioned In the thread
zhanghaitao said:
Let's write more notes, handsome boy.
---------- Post added at 01:40 PM ---------- Previous post was at 01:10 PM ----------
This version is still very streamlined，There are no Chinese in many places，It's difficult for me to use this level of people.Because I didn't go to university in China.Besides, why not install the keyboard? I can't enter the WiFi password. I want to connect to the computer and install the input method first.
Click to expand...
Click to collapse
use treble twrp
POPiO. said:
use treble twrp
Click to expand...
Click to collapse
I use treble twrp, which is downloaded from the arrows thread.:angel:
Thanks for this beautiful rom. Flashed & All is going fine. I just need the bellow items.
01. Quick tile Row & Column setting.
02. Navigation Smartbar Setting.
03. Slim Recent.
Hope will get on next build. Thanks again for your hard work.
Anonda said:
Thanks for this beautiful rom. Flashed & All is going fine. I just need the bellow items.
01. Quick tile Row & Column setting.
02. Navigation Smartbar Setting.
03. Slim Recent.
Hope will get on next build. Thanks again for your hard work.
Click to expand...
Click to collapse
You can try to edit quick tile Row & Column inside the QS panel > click edit icon > 3 dots menu...
Since it's based on Hardrock83, I'll try to dirty flash from Arrow V4. Liquid Remix is one of my favorites :good:
Great ROM!
Which camera app is recommended to avoid partially green pictures?
Grateful for any hints
michaaa62 said:
Great ROM!
Which camera app is recommended to avoid partially green pictures?
Grateful for any hints
Click to expand...
Click to collapse
Flash gcam all in one package of skull shady ig
Mobile data is not working, added APN manually data works but if I turn it off then turn on it doesn't work. Revert back to Arrow, hope OP will fix it soon.
Sagar3834 said:
Flash gcam all in one package of skull shady ig
Click to expand...
Click to collapse
Still no luck with gcam apps.... I tried a couple, but all forcefully close even with granted permissions.
Well Open Camera from fdroid works for me.
michaaa62 said:
Still no luck with gcam apps.... I tried a couple, but all forcefully close even with granted permissions.
Well Open Camera from fdroid works for me.
Click to expand...
Click to collapse
Wait try this? https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_MI8_V1a.apk
This is what I am using too!!