Database Develop

Disable "3G" while enabling "H" - possible or not?

My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?

3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
Unfortunately, it's impossible, you can either choose "H" & "3G" with wcdma/umts or "G" & "E" with GSM in Mobile Networks. You can't choose to leave out 3G when it's doing H, cause both of them are under wcdma mode.
Of cause, if you leave your "Network mode" to auto, it will jump around gsm and wcdma when it see fit. By choosing it to run GSM mode only, will keep your network connect to "E"/"G(gprs)" ONLY; Or WCDMA for "H"/"3G" ONLY.

helo
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
im from malaysia also,im using samsung g5..in my opinion its the the phone or tab firmware or rom problems..because im using maxis and digi broadband..both network are having problem..3g and hsdpa both switch on and back 3g h 3g h..not stabil and anoyying..

[Q] Would like to set GSM,LTE

Hi,
I noticed at my work my Edge is stronger then my LTE but LTE works better and of course faster then Edge. I am asking if anyone knows how to force only GSM for calls and LTE for data. I go through the options and notice many settings but LTE is always "LTE AUTO" I also use the hidden menu *#*#4636#*#* and set LTE only or CDMA, LTE Unfortunately I am on Rogers and CDMA does not allow my calls to go through and LTE only is exactly that only LTE. Both those options work great but of course drop sporadically which I can live with except the no phone part. What is the point of having a phone if you have no phone reception working on your phone.....
So my question is simple, is there a way to have only GSM and LTE set up or at least GSM and 3G/4G but with out the E network which ever that is.
Thanks
JB

No one?

dudejb said:
No one?
Click to expand...
Click to collapse
Are there any Mods to keep LTE active in low reception area.

dudejb said:
Are there any Mods to keep LTE active in low reception area.
Click to expand...
Click to collapse
You could force LTE only, but then when the reception drops off, you'll have zero cell service.
It would be nice if there were more options offered for preferred networks. I leave mine on WCDMA preferred, and just do without LTE until I want/need it.

[Q] Galaxy S4active LTE activation

Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.

Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?

Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm

Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.

If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.

br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..

br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.

[Q] Access to more Network Mode options? XT1053

I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/

noc215 said:
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
Click to expand...
Click to collapse
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).

Steve-x said:
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Click to expand...
Click to collapse
That makes a lot more sense to me now. So basically the "Auto" mode only considers my reception and not transmittance strength, so it never saw a need to switch me off LTE. I am almost sure it is not my phone because I started experiencing a signal loss issue with my S3 a few days ago. I doubt it's the cell site because as soon as I step out of the building, LTE works with no problems.
I did ended up using LTE OnOff to force CDMA and I can actually do stuff now. I went and did a speedtest ...
Ping: 114 ms
Down: 4.06 Mbps
Up: 0.77 Mbps
I guess with the lack of options, I have yet another reason to roll up the sleeves and get my hands dirty. Haven't touched ABD since I had a samsung captivate!
Thank you

T Mobile Setup/Down Speeds

So i took out the Sim from the Iphone 6 im returning and popped it into this bad boy. Curious as to how you guys are setting up the phone so you get the correct LTE speeds. Im barely getting 9down whereas my gf's galaxy in the same room is getting 20+ down. wonder if i did anything wrong

It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.

dew.man said:
It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.
Click to expand...
Click to collapse
Nah something is def wrong. Phone is barely usable without wifi. What APN settings are you guys using for tmo?

fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.

ikon8 said:
fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.
Click to expand...
Click to collapse
Thats what i been running. Could it have something to do with the sim? Was i supposed to get a sim for an unlocked phone? Urrgh so frustrating

That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.

ikon8 said:
That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.
Click to expand...
Click to collapse
shes got a galaxy s4 so that wont work. however i still got the iphone 6 around. when i put the sim in that phone i get regular LTE speeds.

Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.

ikon8 said:
Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.
Click to expand...
Click to collapse
These Are my options under preffered:
wcdma only, gsm only, wcdma (preffered)/gsm and 4g(preffered)/wcdma/gsm. i dont see lte in the list
per your test, when I switch to LTE only in phone options the I lose all bars and signal totally craps out.

So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.

ikon8 said:
So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.
Click to expand...
Click to collapse
negative. just all bars gone and a big red x. you have this phone on t mobile also? did you do the us firmware update?

Yea, I'm using tmo. My phone is running 23.0.A.2.105

I got 2.93 maybe which one is 105??

I was worried during my first day of owning the phone because my Z1c showed LTE above the bars and now this Z3c shows 4G. I was worried that 4G != LTE.