Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Related
Hi there folks!
Im getting mighty confused about this flashing thing.
Im looking to change my ROM to something else then the ICS from Samsung.
Here is the deal.
I read the warning posts and it say (what i think it means) that my build "XLP9" ICS 4.0.3 from Samsung is not safe to do anything on.
I look around on the net to see if there is a way (despite what i read here).
It looks promising.
But all the things i find is ether a lower version of Android (like 2.3.x) or someone is telling me about tons of stuff to download and do before.
So this is were i ask you all.
Do (been searching for 2 days, perhaps my search terms are bad) anyone know if there is a working way to for me to change my version to AOKP for e.g without destroying my phone?
Like i said before, my Build is: XLP9, android version 4.0.3 (from Samsungs update service).
Phone is rooted using CWM.
Its a Note version for the .EU market bought like a few weeks ago (came with 2.3.x i believe).
If you know a thread that contains step by step instructions that will allow me to change the rom, please post it to me here.
Or if I´m screwed for updating to ICS just tell me so to
Cheers
Honken
Hello again.
Yet another day and cant locate any information that im after.
So i tought perhaps there is a way to downgrade the phone back to the factory settings (not ICS).
But since i did the upgrade to ICS is the old rom still on the phone?
I mean to reset it back (same as thode recovery discs on a computer).
Any help or points in the right direction is helpfull at this time.
cheers
Honken
honken08 said:
Hi there folks!
Im getting mighty confused about this flashing thing.
Im looking to change my ROM to something else then the ICS from Samsung.
Here is the deal.
I read the warning posts and it say (what i think it means) that my build "XLP9" ICS 4.0.3 from Samsung is not safe to do anything on.
I look around on the net to see if there is a way (despite what i read here).
It looks promising.
But all the things i find is ether a lower version of Android (like 2.3.x) or someone is telling me about tons of stuff to download and do before.
So this is were i ask you all.
Do (been searching for 2 days, perhaps my search terms are bad) anyone know if there is a working way to for me to change my version to AOKP for e.g without destroying my phone?
Like i said before, my Build is: XLP9, android version 4.0.3 (from Samsungs update service).
Phone is rooted using CWM.
Its a Note version for the .EU market bought like a few weeks ago (came with 2.3.x i believe).
If you know a thread that contains step by step instructions that will allow me to change the rom, please post it to me here.
Or if I´m screwed for updating to ICS just tell me so to
Cheers
Honken
Click to expand...
Click to collapse
It have too many method to change from stock rom to custom rom or aokp. My suggestion is choose your favourite rom and read carefully with the installation method provided at op, then you be fine.
Sent from my GT-N7000 using xda premium
honken08 said:
Hello again.
Yet another day and cant locate any information that im after.
So i tought perhaps there is a way to downgrade the phone back to the factory settings (not ICS).
But since i did the upgrade to ICS is the old rom still on the phone?
I mean to reset it back (same as thode recovery discs on a computer).
Any help or points in the right direction is helpfull at this time.
cheers
Honken
Click to expand...
Click to collapse
Now that you have upgraded to ICS. Those are the factory settings.
Easiest way to downgrade to GB Is by flashing a stock GB rom via pc Odin.
Most of the new ICS custom ROMs now just require you to install AbyssKernel 4.2, then select advanced options and select reboot recovery. Then you wipe your device (wipe data, cache and dalvik cache). From this moment you're free to flash. It all takes less then a minute if you hurry (joking, don't rush when flashing your phone), and it's not very complicated. Do it once and you'll know it's simple.
You need to have a root access first. Plenty of guides how to do it out there.
I bought used milestone 2 days ago and it is slow. I know its rooted because there is superuser icon.
But because of my noobity i dont know what he installed then. Strange thing is that it says Android version 2.2.1 which should be Froyo, but launcher looks like Eclair.
Screenshot pics are below, can you conclude what has he done? And what would you suggest?
About phone in settings: ttp://imageshack.us/photo/my-images/222/20120927013327.jpg/
Home screen like Eclair: ttp://imageshack.us/photo/my-images/713/20120927013831.jpg/
Im not allowed to post links so i removed letter h from my screenshot links. I hope that doesnt break the rules. I apologize if it does.
If i were you, i would definitely do a Factory Reset. Not because of the launcher (probably it's just a custom one), but the slowness.
Besides that, i would install kabaldan's CM7 or CM10.
I did factory reset and everythings the same, so i decided to install something else.
It is already rooted but i dont really know what im doing so i would like to go by some of those tutorials for rooting and installing rom. Can i do the same process as if it wasnt already rooted?
I mean, is it a bit more simple if its already rooted?
Would i mess something up if i did everything from the beggining as in tutorial?
THIS is the best tutorial you can get.
It's for CM7 which you can download from HERE.
But if you decide to give CM10 a try, you will find a link to the latest nighly in my signature, and a guide to make it bootable here.
kralju753 said:
[...]
Strange thing is that it says Android version 2.2.1 which should be Froyo, but launcher looks like Eclair.
[...]
Click to expand...
Click to collapse
It took Motorola forever to bring the 2.2 Update - but still they didn't manage to integrate the Froyo launcher.
Might as well be the official 2.2.1.
Anyhow - the stock roms are pretty bad - use CM (7 or 10, I prefer 7) or something CM-based (like MIUI).
The installation process is the same for every ROM.
Flash vulnerable recovery partition, install Open Recovery, wipe, apply update.zip.
For details refer to the tutorials Erovia posted.
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Sorry, can somebody move this under questions, just realized that this isn't the right place.
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
1) Didn't use CM, been on OmniROM
2) You can use Titanium Backup
3)Yeah, you could do that, update it via CMUpdater
4)Just before you install a ROM with a higher android Version, always wipe /system partition.
cool thanks!
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.
first off this isnt my tablet and i know nothing about it. its my dads and he installed clockwork mod? and cyanogenmod on android 4.4.4 on it. Well a few years ago he stopped using it in place of another tablet. he recently rediscovered it and decided he wanted to update it but doest remember what he did.. so my question is this ( and feel free to just send links to the information and ill figure it out ) i have none of the recovery roms or anything. so what would be the best rom to install and should i search for the stock rom first and restore it to factory then find the most stable rom while still being lightweight.
Cyanogenmod 11 is probably what you're running. The instructions for that are here. I've personally been using Evervolv for a loooong time. I just use mine to read comics. You can find Evervolv info here. I just got on today to see if there's been anything new. I may try out this ROM here.
The original operating system on the Touchpad was webOS, not Android, so I'm not sure what you mean by "Stock ROM." If you've already got clockwork and CM on there, you'd be better off installing TWRP and following the instructions in the links above. It's been so long since I've done anything with mine, I can't remember steps either, lol.