My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Try the tool kit in development.
redmanjoey said:
My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Click to expand...
Click to collapse
redmanjoey said:
My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Click to expand...
Click to collapse
Are you in bootloader/fastbootusb?
BD619 said:
Are you in bootloader/fastbootusb?
Click to expand...
Click to collapse
Yes, I am in fastbootusb. The same thing happens on the toolkit. I doubt it is any kind of hardware defect, but the device is recognized in fastboot which is why I am SUPER confused. This is the first time I have ever run into an issue with fastboot.
redmanjoey said:
Yes, I am in fastbootusb. The same thing happens on the toolkit. I doubt it is any kind of hardware defect, but the device is recognized in fastboot which is why I am SUPER confused. This is the first time I have ever run into an issue with fastboot.
Click to expand...
Click to collapse
I initially had a bad download and had issues with both ways to flash. Redownloaded and it worked.
Also, with the tool I've had issues with usb switching from storage to media which affected even using adb to push files. Make sure that's not an issue with the push method.
Sent from M8 on XDA Premium APP
joshuaw84 said:
I initially had a bad download and had issues with both ways to flash. Redownloaded and it worked.
Also, with the tool I've had issues with usb switching from storage to media which affected even using adb to push files. Make sure that's not an issue with the push method.
Sent from M8 on XDA Premium APP
Click to expand...
Click to collapse
Are you implying the fastboot download was bad or the recovery? I tried three different recoveries now and none worked. I also tried using hassoon2000s method and just get an error saying device not found.
Also, I am using the fastboot file that came directly from HTC so I am really scratching my head right now...
redmanjoey said:
Also, I am using the fastboot file that came directly from HTC so I am really scratching my head right now...
Click to expand...
Click to collapse
It could be outdated.
Do you have android sdk on your PC?
If so make sure it's up to date.
If not get it HERE
redmanjoey said:
Are you implying the fastboot download was bad or the recovery? I tried three different recoveries now and none worked. I also tried using hassoon2000s method and just get an error saying device not found.
Click to expand...
Click to collapse
Just giving you my experience where there were a couple issues that made it seem like I was stuck. Take it or leave it I guess.
Sent from M8 on XDA Premium APP
joshuaw84 said:
Just giving you my experience where there were a couple issues that made it seem like I was stuck. Take it or leave it I guess.
Sent from M8 on XDA Premium APP
Click to expand...
Click to collapse
Sorry if I sounded mean or anything I was literally just asking which one you meant lol. I now realize "are you implying" does sound kinda snarky. Anyway, it must have been something with my computer because I did it on another computer and got it to work.
So the thread doesn't go to waste, if anyone is having issues try on another computer.
Okay, now trying to flash the stock recovery to get the phone exchanged for radio issues, I am running into the same problem. I tried both computers now. Hopefully I figure it out soon, had to activate an old blackberry for the time being.
"sending 'recovery' (16472 KB)...
FAILED (remote: not allowed)
finished. total time: 0.007s"
I have had the same problem before on a different phone. All you need to do is put it on the sd card and use the boot loader method. The phone will automatically find it and flash it. Then just remove sd card and delete file so it doesn't keep prompting to flash it every time you reboot.
{ParanoiA} said:
I have had the same problem before on a different phone. All you need to do is put it on the sd card and use the boot loader method. The phone will automatically find it and flash it. Then just remove sd card and delete file so it doesn't keep prompting to flash it every time you reboot.
Click to expand...
Click to collapse
To flash a recovery? Just rename the recovery as a radio file?
Yes. Go to http://forum.xda-developers.com/showthread.php?t=2696652 and all the info you need is there along with directions.
Related
Hello folks,
During update from Revolution HD 3.4 to 3.5 something went wrong and process stopped before it got finished. Now I ended up in bootloop, even recovery is not working. I've tried to use RUU but failed on CID verification as I'm having the phone from 3 IE. Is any chance to bring it back to life or i just got very expensive paper weight ?
Or if anyone can provide RUU for 3 IE I'm willing to pay for it.
Bad day, bad day...
Thank you for any advice.
megahafo said:
Hello folks,
During update from Revolution HD 3.4 to 3.5 something went wrong and process stopped before it got finished. Now I ended up in bootloop, even recovery is not working. I've tried to use RUU but failed on CID verification as I'm having the phone from 3 IE. Is any chance to bring it back to life or i just got very expensive paper weight ?
Or if anyone can provide RUU for 3 IE I'm willing to pay for it.
Bad day, bad day...
Thank you for any advice.
Click to expand...
Click to collapse
What is happening when you enter recovery?
MacHackz said:
What is happening when you enter recovery?
Click to expand...
Click to collapse
I can see the recovery screen (clockworkmod) for about 0.1 second and it reboots again.
megahafo said:
I can see the recovery screen (clockworkmod) for about 0.1 second and it reboots again.
Click to expand...
Click to collapse
try reflashing it and wiping cache etc
MacHackz said:
try reflashing it and wiping cache etc
Click to expand...
Click to collapse
Thanks, for hint. Got recovery working again
What I have done.
1.) Unlocked, re-locked bootloader.. (i think this did the trick, full wipe ?)
2.) Wiped cache
3.) Re-flash clockworkmod
4.) Upload ROM using sideload.
Now the phone is back. I hope i will not break something again.
Hi, I am having the same issue with my phone as of right now. I tried re-locking bootloader and then unlocking again and also reflashing clockwork and I am still getting the bootloop and cannot access recovery (flashes for 0.1 secs and then disappears).
What exactly did you do to fix the issue?
tokenwoken said:
Hi, I am having the same issue with my phone as of right now. I tried re-locking bootloader and then unlocking again and also reflashing clockwork and I am still getting the bootloop and cannot access recovery (flashes for 0.1 secs and then disappears).
What exactly did you do to fix the issue?
Click to expand...
Click to collapse
The cue there if wiping the cache partition.
Riyal said:
The cue there if wiping the cache partition.
Click to expand...
Click to collapse
Hi Riyal,
I have fixed that issue with fastboot erase cache. Now, I am having a problem loading a ROM because it states in recovery that it "can't mount SD card"?
Figured it out, I just had to ADB push a stock rom and then re-wipe/re-flash
tokenwoken said:
Hi Riyal,
I have fixed that issue with fastboot erase cache. Now, I am having a problem loading a ROM because it states in recovery that it "can't mount SD card"?
Click to expand...
Click to collapse
I had the same problem, going to try to sideload this stock de-odexed rom (didn't work the first few times) and CHILL THE PHUCK out until AOKP.
scared me lol first HTC device, brand new, and I thought I broke it.
P.S I realized that REVOHD uses AROMA, that's why it wouldn't sideload.... Am I Rite?
Similar issue
tokenwoken said:
Figured it out, I just had to ADB push a stock rom and then re-wipe/re-flash
Click to expand...
Click to collapse
My HTC One device is actually suffering the same problem.
I bought my HTC One Sprint(Sim-Free Edition) in the US and got it to India.
But after I inserted my Indian Sim it said ''SIM LOCK ENABLED''.....I just got frustrated and
rooted the device and tried to install ''Android RevolutionHD (Odexed)'' Stock ROM with the help of TWRP.
But after I installed the stock rom, my device is just showing the HTC symbol and hanging there itself.
It Hangs there for around 6-7mins and reboots and the same happens again.
The only thing I can do is to get in to the bootloader and Power OFF the Device.
Any Help???? Please..... just having a costly paper weight since 2 weeks.
Please need help urgently....!!!
Hi
Greetings,
Did you flashed boot.IMG if no
Extract the boot.img from the Rom
Copy that file to abd/fastboot folder
Now connect you phone with pc with your phone booted in fastboot/bootloader,
Later flash boot.img by following command
"Fastboot flash boot boot.img"
Reboot and your done
If you do not know how to use abd search for it
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
thanks but....
shrex said:
Hi
Greetings,
Did you flashed boot.IMG if no
Extract the boot.img from the Rom
Copy that file to abd/fastboot folder
Now connect you phone with pc with your phone booted in fastboot/bootloader,
Later flash boot.img by following command
"Fastboot flash boot boot.img"
Reboot and your done
If you do not know how to use abd search for it
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
thanks for your advice but how do i extract boot.img when the phone is not even switching on to connect to the pc.
suhazgummadi said:
thanks for your advice but how do i extract boot.img when the phone is not even switching on to connect to the pc.
Click to expand...
Click to collapse
You have the zip file of ARHD in your pc extract the boot.img using winrar thats it and you have to put that file in abd/fastboot folder in pc
and everything what i said its to be done in pc
excpet putting phone in fastboot mode
suhazgummadi said:
My HTC One device is actually suffering the same problem.
I bought my HTC One Sprint(Sim-Free Edition) in the US and got it to India.
But after I inserted my Indian Sim it said ''SIM LOCK ENABLED''.....I just got frustrated and
rooted the device and tried to install ''Android RevolutionHD (Odexed)'' Stock ROM with the help of TWRP.
But after I installed the stock rom, my device is just showing the HTC symbol and hanging there itself.
It Hangs there for around 6-7mins and reboots and the same happens again.
The only thing I can do is to get in to the bootloader and Power OFF the Device.
Any Help???? Please..... just having a costly paper weight since 2 weeks.
Please need help urgently....!!!
Click to expand...
Click to collapse
The Sprint version is never going to work on any carrier other than Sprint. It's a CDMA device. The sim slot if for connecting to Sprint's LTE network, but requires a CDMA connection first and foremost to work at all.
Sent from my HTC One using xda premium
Thanks, this actually worked for me. I have HTC One TMO edition, i did a sdcard format and things went very bad from there and i was not able to flash anything and recovery kept rebooting.. after i tried this below, it worked like a charm..
megahafo said:
Thanks, for hint. Got recovery working again
What I have done.
1.) Unlocked, re-locked bootloader.. (i think this did the trick, full wipe ?)
2.) Wiped cache
3.) Re-flash clockworkmod
4.) Upload ROM using sideload.
Now the phone is back. I hope i will not break something again.
Click to expand...
Click to collapse
Quickest and easiest way to fix this issue is...
'fastboot erase cache'
'fastboot reboot recovery'
hnt20 said:
Thanks, this actually worked for me. I have HTC One TMO edition, i did a sdcard format and things went very bad from there and i was not able to flash anything and recovery kept rebooting.. after i tried this below, it worked like a charm..
Click to expand...
Click to collapse
I'm stuck on the same boat :\
I was able to finally boot into CWM recovery but I'm getting write errors all over the place.
I used the AIO Kit to re-lock the bootloader and unlock it - Reflashed CWM - Tried to sideload ARHD 10.0 but the DOS prompt errors out saying that it cannot find my device.
Little help?
HumorousMaximus said:
I'm stuck on the same boat :\
I was able to finally boot into CWM recovery but I'm getting write errors all over the place.
I used the AIO Kit to re-lock the bootloader and unlock it - Reflashed CWM - Tried to sideload ARHD 10.0 but the DOS prompt errors out saying that it cannot find my device.
Little help?
Click to expand...
Click to collapse
i was going through the same thing yesterday and i thought i had bricked my phone. what i did that finally worked, was unplugging the usb, restarting the computer, reinstalling htc drivers, then restarting the computer, then using a different usb port. i was finally able to sideload ARHD whereas before i could do fastboot commands, but it wasn't responding to the sideload, and wasn't able to mount the sdcard, so i thought i was screwed. :good:
mky4b11 said:
i was going through the same thing yesterday and i thought i had bricked my phone. what i did that finally worked, was unplugging the usb, restarting the computer, reinstalling htc drivers, then restarting the computer, then using a different usb port. i was finally able to sideload ARHD whereas before i could do fastboot commands, but it wasn't responding to the sideload, and wasn't able to mount the sdcard, so i thought i was screwed. :good:
Click to expand...
Click to collapse
Thanks for the tip, I was able to get back into AROMA but the original issue that got me to this point came up again. Aroma installer runs and during the install it kicks itself out and sends me back to recovery, so the installer doesn't complete. It gets to about 30% and craps out just after it writes system data and starts to install the .apk's. Screen goes black and it reboots itself and sends me to recovery.
thoughts?
For one, stop doing that. but, mistakes are made, so here are a couple ways to get around not having a Mount Internal Storage option in TWRP
Okay guys. a lot of you seem to have issues, as did I when I first attempted. If you happen to wipe your internal memory here are a couple ways to go about fixing that.
here's a step by step. make sure you have USB debugging on.
METHOD 1, RESTORE TO STOCK UNROOTED, LOCKED(then start over from scratch I suppose.)
Download the AIO Tool Kit and extract. anywhere
Hasoons AIO Toolkit
Download the Sprint_HTC_One_m7wls_1.29.651.7_encrypted_ROM.zip and rename it to something short such as lol.zip(that's what I used, just rename it lol, not lol.zip, if you rename to lol.zip it will show up as lol.zip.zip.) and place it at the root of your c:/ drive, so c:/lol.zip
Navigate to the AIO toolkit folder you extracted, Open the One.exe. At the bottom, click reboot into bootloader and then do command.
Hold shift and right click then click Open Command Window Here.
when the command line opens up type
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip c:/lol.zip
If you get a message about flushing, then retype the last command, "fastboot flash zip c:/lol.zip"and it should work
METHOD 2, ADB SIDELOAD A ROM USING hasoon's AIO toolkit.
Try sideloading the rom.
Unlock bootloader and install twrp
Download your rom, Open up hasoons AIO toolkit and select sideload a rom.
The AIO will ask you to boot into recovery and hit sideload.
On your One, go to advanced settings, sideload a rom.
Next you can navigate to the rom on your PC with AIO and select rom. I used vipers. It will sideload it for you and start to flash in TWRP
Whats the issue happening here? When doing a factory reset(clean wipe) its wiping everything?
david279 said:
Whats the issue happening here? When doing a factory reset(clean wipe) its wiping everything?
Click to expand...
Click to collapse
Negative. I'm finding a ridiculous amount of posts in other threads about people ACCIDENTALLY wiping their internal storage. The only thing that will wipe internal storage is selecting internal storage in advanced wipe settings. not a bugs fault. Its pebkac.
Ok i see. I know its a option in advance wiping now but why would people even select that?
david279 said:
Ok i see. I know its a option in advance wiping now but why would people even select that?
Click to expand...
Click to collapse
Lack of attention to detail. It really is scary how many people have posted in so many different threads about it. I know some are by simple mistake, but its getting crazy.
Attention to detail may have found your thread in the Q/A, help and troubleshooting forum where it belongs. Just saying...
Please be kind to others, Thanks!
I'm fairly certain QA Help & troubleshooting is for asking for help and troubleshooting.
Needless to say I am being nice. I'm posting this to help these people.
Sent from my HTCONE using xda app-developers app
Offering to help like you do says a ton for sure. Thanks! I believe one of the guys over there hit on a fix for his phone which is pretty sweet too.
Indeed. TWRP ADV side load wasn't working with his device but CWM Side load did!
Sent from my HTCONE using xda app-developers app
I have not had any problems(knock on wood) using superwipe
One problem with your instructions. If the user has changed their folder options to show file extensions, then renaming the file to lol (without the .zip) will create a file lol with no extension. Might want to add some additional instructions in there to cover that scenario.
Sent from my HTC One running ViperROM One using Tapatalk v2
dont know if this is right but this is what im getting
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 132.344s
Mr.Muscles said:
dont know if this is right but this is what im getting
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 132.344s
Click to expand...
Click to collapse
You're having the same problems another fella was having. You're going to have to ADB sideload through CWM
Sent from my HTCONE using xda app-developers app
I'm having some problems. I recently got this htc one for sprint off craigslist and tried to do a factory reset. The person didnt tell me the phone was rooted and I have never done any of this but I should have still known enough to not delete everything when the twrp page came up. Well, I did and deleted the OS. Ive been doing a lot of research but theres so many different thing Im a bit confused. I've tried a few things but I'm having trouble even getting the computer to recognize the phone. I've gotten the furthest with your post I think but it says error: device not found from the one.exe. From what I see I may need to set the phone to allow usb debugging, but I cant find anything on where to do that from twrp. I also ordered one of the otg usb cables but dont want to wait a week to get the phone working if I dont have to. Any suggestions?
ADB is enabled in twrp by default. Are you trying the RUU method or sideloading method?
And have you installed the HTC drivers?
Sent from my HTCONE using xda app-developers app
youkosnake said:
ADB is enabled in twrp by default. Are you trying the RUU method or sideloading method?
And have you installed the HTC drivers?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure I've tried both methods, though all I know about all this is from the past 24 hours of trying to figure out what happened. I cant download the drivers on my computer. When I plug it in in either recovery mode or the screen that says tampered, unlocked, fast boot, etc., the phone isnt even recognized as being plugged in and when I reset the phone from twrp and plug it in, it will only download some of the drivers but then when I go to the command it says error and doesnt recognize the phone.
Jskinnyh said:
I'm pretty sure I've tried both methods, though all I know about all this is from the past 24 hours of trying to figure out what happened. I cant download the drivers on my computer. When I plug it in in either recovery mode or the screen that says tampered, unlocked, fast boot, etc., the phone isnt even recognized as being plugged in and when I reset the phone from twrp and plug it in, it will only download some of the drivers but then when I go to the command it says error and doesnt recognize the phone.
Click to expand...
Click to collapse
Flash CWM on it instead of TWRP, then try everything again
Jskinnyh said:
I'm having some problems. I recently got this htc one for sprint off craigslist and tried to do a factory reset. The person didnt tell me the phone was rooted and I have never done any of this but I should have still known enough to not delete everything when the twrp page came up. Well, I did and deleted the OS. Ive been doing a lot of research but theres so many different thing Im a bit confused. I've tried a few things but I'm having trouble even getting the computer to recognize the phone. I've gotten the furthest with your post I think but it says error: device not found from the one.exe. From what I see I may need to set the phone to allow usb debugging, but I cant find anything on where to do that from twrp. I also ordered one of the otg usb cables but dont want to wait a week to get the phone working if I dont have to. Any suggestions?
Click to expand...
Click to collapse
enable usb debugging in developer options in phone settings, turn on development options select usb debugging, not in twrp.
Aldo101t said:
enable usb debugging in developer options in phone settings, turn on development options select usb debugging, not in twrp.
Click to expand...
Click to collapse
I believe he said he deleted his os. If that's the case he has no phone settings. All he has is twrp.
Sent from my EVO using xda premium
durandetto said:
I believe he said he deleted his os. If that's the case he has no phone settings. All he has is twrp.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup, no os. its looking like my only option is waiting for the otg cable to come and then I can sideload an os using that?
I just got my HTC One less than a week ago, rooted and flashed my first ROM with no issues. Decided to try out a different one today, but after flashing it, my phone rebooted into bootloader and has been stuck there. Anytime I try to reboot the phone or reboot into recovery, it just goes back to the bootloader screen. Same thing when I attempt a factory reset. I've tried reinstalling TWRP recovery and although it says the install is successful, it's still stuck in bootloader. I also tried to install my previous ROM via fastboot command (which is failing), but to no avail. I got the following output:
sending 'zip' (994092 KB)...
OKAY [ 38.486s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 54.083s
I'm on the Sprint version, and I'm aware that 4.2 ROMs don't work on Sprint yet so I'd be using older versions of them for the time being, but I guess I inadvertently used an incorrect version.
Any ideas?
hmm...must really be bricked. :-\
if it is booting into bootloader, it is not bricked...
try connecting your USB cable , select fastboot in bootloader... it should show the FASTBOOT USB
now on your PC, where you have the ADB/Fasboot files, SHIFT+RIGHT CLICK on that folder and select Open command window here.
In command window, enter FASTBOOT ERASE CACHE
and try booting again...it might work.....
mathrania said:
if it is booting into bootloader, it is not bricked...
try connecting your USB cable , select fastboot in bootloader... it should show the FASTBOOT USB
now on your PC, where you have the ADB/Fasboot files, SHIFT+RIGHT CLICK on that folder and select Open command window here.
In command window, enter FASTBOOT ERASE CACHE
and try booting again...it might work.....
Click to expand...
Click to collapse
nope, no luck I also tried flashing recovery again in addition to it, still going straight to bootloader.
nsuviolin2005 said:
nope, no luck I also tried flashing recovery again in addition to it, still going straight to bootloader.
Click to expand...
Click to collapse
Try using the HTC one AIO toolkit to flash a new recovery and see if that helps.
It uses the FASTBOOT method to flash. Plus you have options to try CWM and TWRP.
If that works you should be able to flash a different rom to get your device up and running
gazlufc said:
Try using the HTC one AIO toolkit to flash a new recovery and see if that helps.
It uses the FASTBOOT method to flash. Plus you have options to try CWM and TWRP.
If that works you should be able to flash a different rom to get your device up and running
Click to expand...
Click to collapse
When I click to flash a recovery, it gives me a prompt that there will be 2 screens and to close the 1st one once I'm in bootloader...I do that, then the 2nd screen comes up but nothing happens. Same thing for both the Sprint options
You need to be in the fastboot menu not bootloader menu.
Sent from my HTC One using xda app-developers app
gazlufc said:
You need to be in the fastboot menu not bootloader menu.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I was...FASTBOOT USB mode, my phone is booting into that menu by default
nsuviolin2005 said:
I was...FASTBOOT USB mode, my phone is booting into that menu by default
Click to expand...
Click to collapse
hmmmmm thats strange.
What you could try is download one of the recoveries and unzip the file so you get the .img file of that recovery.
Then try to flash your own recovery option. see if that works
gazlufc said:
hmmmmm thats strange.
What you could try is download one of the recoveries and unzip the file so you get the .img file of that recovery.
Then try to flash your own recovery option. see if that works
Click to expand...
Click to collapse
Is this supposed to be automated or something? All I get with any option is an command line screen that's in the folder but nothing's happening.
nsuviolin2005 said:
Is this supposed to be automated or something? All I get with any option is an command line screen that's in the folder but nothing's happening.
Click to expand...
Click to collapse
could you post screenshots so I could see what happening?
---------- Post added at 07:46 PM ---------- Previous post was at 07:38 PM ----------
The only other thing I could think of is to try an RUU if all else fails but I can't guarantee that it will work
Sent from my HTC One using xda app-developers app
gazlufc said:
could you post screenshots so I could see what happening?
---------- Post added at 07:46 PM ---------- Previous post was at 07:38 PM ----------
The only other thing I could think of is to try an RUU if all else fails but I can't guarantee that it will work
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Profit! Turns out the flash your own recovery option worked, I just didn't follow it all the way through, initially...after I closed the command prompt screen, the Open file menu came up and I was able to pick my TWRP recovery and boot into it. I restored my backup I made right before flashing the bad ROM and the phone is booting past the bootloader now
But.....next issue is that it's booting to a black screen instead of the regular lock screen, and after sitting there in that state for a few minutes, it reboots. :-\ I'm wondering if this is just because I deactivated the phone and switched back to my EVO LTE while trying to fix the One...that would be a first, though, as the phones are usually operational even if they don't have service.
nsuviolin2005 said:
Profit! Turns out the flash your own recovery option worked, I just didn't follow it all the way through, initially...after I closed the command prompt screen, the Open file menu came up and I was able to pick my TWRP recovery and boot into it. I restored my backup I made right before flashing the bad ROM and the phone is booting past the bootloader now
But.....next issue is that it's booting to a black screen instead of the regular lock screen, and after sitting there in that state for a few minutes, it reboots. :-\ I'm wondering if this is just because I deactivated the phone and switched back to my EVO LTE while trying to fix the One...that would be a first, though, as the phones are usually operational even if they don't have service.
Click to expand...
Click to collapse
Glad to hear the recovery worked. As for the phone staying on black. I would just advice to flash a nother rom if the problem still persists mate
gazlufc said:
Glad to hear the recovery worked. As for the phone staying on black. I would just advice to flash a nother rom if the problem still persists mate
Click to expand...
Click to collapse
Well, flashing and restoring didn't quite work, so I wound up having to do a factory reset (thankfully I had all my files on my PC from when I had to move them from my EVO, and since I'd only upgraded a few days ago, I didn't lose a whole lot) and a re-lock of the bootloader.
Only weird thing is, even re-locking it, the phone remained in S-OFF state. But I was able to rerun the HTC Dev Unlock to unlock the bootloader again and flashed a correct ROM. Back in business.
Thanks for your help...that toolkit you linked me to saved my ass.
No problem man glad I could help
Sent from my HTC One using xda app-developers app
nsuviolin2005 said:
Well, flashing and restoring didn't quite work, so I wound up having to do a factory reset (thankfully I had all my files on my PC from when I had to move them from my EVO, and since I'd only upgraded a few days ago, I didn't lose a whole lot) and a re-lock of the bootloader.
Only weird thing is, even re-locking it, the phone remained in S-OFF state. But I was able to rerun the HTC Dev Unlock to unlock the bootloader again and flashed a correct ROM. Back in business.
Thanks for your help...that toolkit you linked me to saved my ass.
Click to expand...
Click to collapse
\question i am having the same problem you have but i think its due to water damage i am going straight into the bootloader are sometime i can get it into safe mode
nsuviolin2005 said:
Well, flashing and restoring didn't quite work, so I wound up having to do a factory reset (thankfully I had all my files on my PC from when I had to move them from my EVO, and since I'd only upgraded a few days ago, I didn't lose a whole lot) and a re-lock of the bootloader.
Only weird thing is, even re-locking it, the phone remained in S-OFF state. But I was able to rerun the HTC Dev Unlock to unlock the bootloader again and flashed a correct ROM. Back in business.
Thanks for your help...that toolkit you linked me to saved my ass.
Click to expand...
Click to collapse
To be S-ON again you need to reboot into bootloader
Then FASTBOOT USB
then run fastboot and write "fastboot oem writesecureflag 3" and enter. Now you will be S-ON
But do NOT S-ON unless you absolutely need to.
Hi guys, I'll just start things off with saying that I am far from being anywhere near as technologically advanced as the majority of you so I would like your help if possible.
I had wanted to flash back to Stock and unroot my Moto X but for some reason I had gone into TWRP and decided to delete everything. Now every time I try to reboot from TWRP, it'll just say that the phone does not have an OS Installed and therefore if I reboot it, it will just stay on the 'Warning Bootloader Unlocked" screen.
I've read quite a few threads on various forums but I am unable to get my laptop to recognise the device in fastboot. That's my only problem so far as I've downloaded the Motorola Device Manager and all those other things but still cannot get my laptop to show the device for me to put the files into. When I plug it in, I am able to hear the sound and the device recognizes that it's been plugged in but I can't see it on my laptop.
Any and all help is GREATLY appreciated. Thanks guys and forgive my ignorance.
Sent from my SM-N9005 using XDA Free mobile app
boss. said:
Hi guys, I'll just start things off with saying that I am far from being anywhere near as technologically advanced as the majority of you so I would like your help if possible.
I had wanted to flash back to Stock and unroot my Moto X but for some reason I had gone into TWRP and decided to delete everything. Now every time I try to reboot from TWRP, it'll just say that the phone does not have an OS Installed and therefore if I reboot it, it will just stay on the 'Warning Bootloader Unlocked" screen.
I've read quite a few threads on various forums but I am unable to get my laptop to recognise the device in fastboot. That's my only problem so far as I've downloaded the Motorola Device Manager and all those other things but still cannot get my laptop to show the device for me to put the files into. When I plug it in, I am able to hear the sound and the device recognizes that it's been plugged in but I can't see it on my laptop.
Any and all help is GREATLY appreciated. Thanks guys and forgive my ignorance.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
You don't put files on the phone and you don't use twrp. Follow the instructions in the return to 100% stock thread.
samwathegreat said:
You don't put files on the phone and you don't use twrp. Follow the instructions in the return to 100% stock thread.
Click to expand...
Click to collapse
I've tried following the steps but I was unsure of step 3 where it says to download and install the proper firmware for the device but still unsure on how to install it. RSD Lite won't pick up the device nor will it show up when I type 'adb devices' in CMD. And finally, how do I go about turning on USB debugging when it won't boot up past the bootloader unlock screen?
Appreciate the help
Sent from my SM-N9005 using XDA Free mobile app
boss. said:
I've tried following the steps but I was unsure of step 3 where it says to download and install the proper firmware for the device but still unsure on how to install it. RSD Lite won't pick up the device nor will it show up when I type 'adb devices' in CMD. And finally, how do I go about turning on USB debugging when it won't boot up past the bootloader unlock screen?
Appreciate the help
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Turn the phone off. Unplug it. Hold down VOL DOWN, and press power. The phone will boot into the bootloader. This is how you flash with rsd lite.
Adb does not work in bootloader, and isn't used for this. Once in bootloader (ap fastboot mode), rsd lite should recognize the device.
Make absolutely sure you do not downgrade to a previous version (you will brick), and make sure you flash the correct firmware for YOUR device/carrier.
You can only flash the same version or higher than what you were on before you erased everything.
samwathegreat said:
Turn the phone off. Unplug it. Hold down VOL DOWN, and press power. The phone will boot into the bootloader. This is how you flash with rsd lite.
Adb does not work in bootloader, and isn't used for this. Once in bootloader (ap fastboot mode), rsd lite should recognize the device.
Make absolutely sure you do not downgrade to a previous version (you will brick), and make sure you flash the correct firmware for YOUR device/carrier.
You can only flash the same version or higher than what you were on before you erased everything.
Click to expand...
Click to collapse
Thanks for the help! Unfortunately RSD Lite doesn't recognise the device in bootloader. Am I supposed to put the files into a certain place for things to start working properly and is it also because I'm using windows 8.1? I've already installed the Motorola Device Manager as well.
Really sorry for all the questions - complete newbie right here
Sent from my SM-N9005 using XDA Free mobile app
boss. said:
Thanks for the help! Unfortunately RSD Lite doesn't recognise the device in bootloader. Am I supposed to put the files into a certain place for things to start working properly and is it also because I'm using windows 8.1? I've already installed the Motorola Device Manager as well.
Really sorry for all the questions - complete newbie right here
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
You said you downloaded moto device manager... Did you install it? If so you are one of the unlucky ones and will have to use the manual method with fastboot and mfastboot. Take it slow and follow the instructions. Leave out the config carrier line.
To make sure fastboot is working, type fastboot devices while in bootloader mode.
samwathegreat said:
You said you downloaded moto device manager... Did you install it? If so you are one of the unlucky ones and will have to use the manual method with fastboot and mfastboot. Take it slow and follow the instructions. Leave out the config carrier line.
To make sure fastboot is working, type fastboot devices while in bootloader mode.
Click to expand...
Click to collapse
Oh okay that makes sense. Yeah I had installed but still nothing. Okay, I'll try the manual method, thanks heaps!
I've typed it fastboot devices in CMD and it came up with T017500PDP fastboot. I assume that's good? Haha
Sent from my SM-N9005 using XDA Free mobile app
boss. said:
Oh okay that makes sense. Yeah I had installed but still nothing. Okay, I'll try the manual method, thanks heaps!
I've typed it fastboot devices in CMD and it came up with T017500PDP fastboot. I assume that's good? Haha
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Yes perfect.
Run one command at a time - copy/paste them.
Remember to use mfastboot for system.img - regular fastboot will NOT work. Also remember to skip the config carrier command.
samwathegreat said:
Yes perfect.
Run one command at a time - copy/paste them.
Remember to use mfastboot for system.img - regular fastboot will NOT work. Also remember to skip the config carrier command.
Click to expand...
Click to collapse
You my friend are a legend. Last round (hopefully) of questions though: where the code says to type in fastboot flash .... .gpt.bin and all those other things, am I supposed to put the files somewhere in particular? Because just regularly typing them into CMD comes up with (bootloader) Variable not supported! Then error: cannot open 'gtp.bin' or cannot open 'recovery.img' and so on but on the phone it says getvar partition-type:recovery or boot and so on.
Also the when the instructions say to use mfastboot, CMD says that it is not recognized as an internal or external command. Thanks!
Sent from my SM-N9005 using XDA Free mobile app
boss. said:
You my friend are a legend. Last round (hopefully) of questions though: where the code says to type in fastboot flash .... .gpt.bin and all those other things, am I supposed to put the files somewhere in particular? Because just regularly typing them into CMD comes up with (bootloader) Variable not supported! Then error: cannot open 'gtp.bin' or cannot open 'recovery.img' and so on but on the phone it says getvar partition-type:recovery or boot and so on.
Also the when the instructions say to use mfastboot, CMD says that it is not recognized as an internal or external command. Thanks!
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
First: yes, you have to put those files in the same folder as you are running the commands from. If your command prompt shows C:\users\jimmy\
Then that is where the files should be! You should have extracted the zip file you downloaded to the same folder you are running the commands from.
Second, you obviously have not download mfastboot.exe (it is linked in the return to stock thread) OR you didn't put it in the same folder as the rest of the files.
The "variable not supported" messages are normal. The error cannot open.... errors are NOT.
I'm attaching mfastboot.exe (it's zipped - extract it to the same folder as everything else) to this post so you don't have to go looking for it.
DON'T move on if the first command doesn't work. Make sure each one gives success before you move on.
Awesome!
samwathegreat said:
First: yes, you have to put those files in the same folder as you are running the commands from. If your command prompt shows C:\users\jimmy\
Then that is where the files should be! You should have extracted the zip file you downloaded to the same folder you are running the commands from.
Second, you obviously have not download mfastboot.exe (it is linked in the return to stock thread) OR you didn't put it in the same folder as the rest of the files.
The "variable not supported" messages are normal. The error cannot open.... errors are NOT.
I'm attaching mfastboot.exe (it's zipped - extract it to the same folder as everything else) to this post so you don't have to go looking for it.
DON'T move on if the first command doesn't work. Make sure each one gives success before you move on.
Click to expand...
Click to collapse
Thanks so much, it worked great! The colours are a bit out of wack though (the blues are now orange and so on) and the bot animation is messed but still better than nothing. Thanks so much for your help!
boss. said:
Thanks so much, it worked great! The colours are a bit out of wack though (the blues are now orange and so on) and the bot animation is messed but still better than nothing. Thanks so much for your help!
Click to expand...
Click to collapse
You're welcome....but that isn't normal. I suggest doing it again from the beginning. A full SBF to stock re-writes all the partitions and there shouldn't be anything "out of wack". Sounds like something went wrong....OR your device has physical damage?
Anyways, please consider hitting the "THANKS" button under any and all posts that help you. :good:
samwathegreat said:
You're welcome....but that isn't normal. I suggest doing it again from the beginning. A full SBF to stock re-writes all the partitions and there shouldn't be anything "out of wack". Sounds like something went wrong....OR your device has physical damage?
Anyways, please consider hitting the "THANKS" button under any and all posts that help you. :good:
Click to expand...
Click to collapse
Re-did the whole thing from scratch again and now all problems are solved. Really appreciate the help my friend!
Sent from my SM-N9005 using XDA Free mobile app
I updated my phone to Nexus to 5.1 last night and it got stuck in the boot animation but I figured it would be done when I woke up. Much to my dismay that was not the case so I tried to factory reset and now I get this message that says "No OS found." Tried to plug it up to the computer but it won't connect. I think it may have something to do with the OEM Lock but I cant fix that without the phone turning on. Please help!
How exactly did you upgrade your phone?
Sent from my Benzo'd Google N6 on VZ
lostnthought said:
I updated my phone to Nexus to 5.1 last night and it got stuck in the boot animation but I figured it would be done when I woke up. Much to my dismay that was not the case so I tried to factory reset and now I get this message that says "No OS found." Tried to plug it up to the computer but it won't connect. I think it may have something to do with the OEM Lock but I cant fix that without the phone turning on. Please help!
Click to expand...
Click to collapse
Please provide more info. Stock or custom recovery?
Evolution_Freak said:
Please provide more info. Stock or custom recovery?
Click to expand...
Click to collapse
Custom Recovery.. TWRP v2.8.2
lostnthought said:
Custom Recovery.. TWRP v2.8.2
Click to expand...
Click to collapse
From bootloader, enter the following fastboot commands:
fastboot format cache
fastboot format userdata
This should allow you to get back into TWRP and flash a ROM.
DebianDog said:
How exactly did you upgrade your phone?
Sent from my Benzo'd Google N6 on VZ
Click to expand...
Click to collapse
This may sound silly but I'm not 100% sure. A system notification had been on my screen for over two weeks saying that I had a system update to 5.1 and I finally decided to download and install said update and then it sent me to recovery mode. I don't know why I did but I hit fix permissions.. Just fiddling trying to figure everything out and this is where we are.
Evolution_Freak said:
From bootloader, enter the following fastboot commands:
fastboot format cache
fastboot format userdata
This should allow you to get back into TWRP and flash a ROM.
Click to expand...
Click to collapse
I can get into recovery mode but there isn't a ROM that I can find.. It's gone. And like I said it won't connect to the computer via USB port. (Tried several ports,as well as, different cords) Can't enable OEM lock
lostnthought said:
I can get into recovery mode but there isn't a ROM that I can find.. It's gone. And like I said it won't connect to the computer via USB port. (Tried several ports,as well as, different cords) Can't enable OEM lock
Click to expand...
Click to collapse
I'm not asking you to boot to recovery. Boot to bootloader.
lostnthought said:
I can get into recovery mode but there isn't a ROM that I can find.. It's gone. And like I said it won't connect to the computer via USB port. (Tried several ports,as well as, different cords) Can't enable OEM lock
Click to expand...
Click to collapse
move a rom via a computer to your phone. either connect the recovery to your computer and move it, or connect to a computer and adb push it to your phone.
Sorry, I guess I misread your post. I thought you said can't get to recovery. From TWRP you should be able to enable MTP transfer. Then your PC should see it and you can transfer files as @simms22 suggested.
lostnthought said:
"No OS found."
Click to expand...
Click to collapse
From TWRP, perhaps you wiped the System partition? Heh, I did that just last night... woops... "round 2"!
As a side note, if you're trying to use adb/fastboot from Windows... I had nothing but problems myself, even with the proper drivers. At worst, I had to open the Device Manager, find the phone, and force-install ("update") the driver to Android->Composite USB Device before it would be recognized. Absurd, but pains of working from Windows. (Conversely, I've had pain-free experiences from OSX and Ubuntu.)
vormund said:
From TWRP, perhaps you wiped the System partition? Heh, I did that just last night... woops... "round 2"!
As a side note, if you're trying to use adb/fastboot from Windows... I had nothing but problems myself, even with the proper drivers. At worst, I had to open the Device Manager, find the phone, and force-install ("update") the driver to Android->Composite USB Device before it would be recognized. Absurd, but pains of working from Windows. (Conversely, I've had pain-free experiences from OSX and Ubuntu.)
Click to expand...
Click to collapse
you dont need adb to move anything to your phone when using twrp. just connect to twrp using the mtp option.