XT883 on XT862 for straighttalk. Still not working - Motorola Droid 3

Ok, so I got everything done as per instruction on the bog thread about putting the XT883 radio on an XT862. Done. Every step done. exactly as stated. I have my straighttalk Sim in, and my phone doesn't do anything. got the red no smoking sign in the bars. no service. no phone calls.when I go to search networks. Networks unavailable.
When I go to *#*#4636#*#* set preferred network is set to unknown, and will not change and when I go to select radio band, USA in unsuccessful. well, they all are.
I flashed the radio, moved the build.prop and everything that is to be done. My phone reads as an 883 on my google play account, and all should be fine. Is there a reason the preferred network can't be set? I need to get my phone working because my job is an on call job, and if something happens to my work phone, my personal is kind of important. However, it currently does run N64 quite well, lol. Any help will be greatly appreciated. Thank you and thanks for all your guys' work om getting this whole Droid 3 on ST as smooth of a process as it is.

CPLSeraphim said:
Ok, so I got everything done as per instruction on the bog thread about putting the XT883 radio on an XT862. Done. Every step done. exactly as stated. I have my straighttalk Sim in, and my phone doesn't do anything. got the red no smoking sign in the bars. no service. no phone calls.when I go to search networks. Networks unavailable.
When I go to *#*#4636#*#* set preferred network is set to unknown, and will not change and when I go to select radio band, USA in unsuccessful. well, they all are.
I flashed the radio, moved the build.prop and everything that is to be done. My phone reads as an 883 on my google play account, and all should be fine. Is there a reason the preferred network can't be set? I need to get my phone working because my job is an on call job, and if something happens to my work phone, my personal is kind of important. However, it currently does run N64 quite well, lol. Any help will be greatly appreciated. Thank you and thanks for all your guys' work om getting this whole Droid 3 on ST as smooth of a process as it is.
Click to expand...
Click to collapse
did you get the unlock code and unlock it?

PassingThruLife said:
did you get the unlock code and unlock it?
Click to expand...
Click to collapse
Yes, phone is unlocked and everything should be right. I have it set to GSM/UMTS but I was a little confused on my unability to change it from unknown to GSM...

Redownload build prop, and replace, and/or fix permissions
Sent from my Amazon Kindle Fire using Tapatalk

I tried the build.prop again. nothing. same thing. However, something completely stupid just crossed my mind. We live in a basement Apt out of town a ways. I'm going to check if, when we go to town tonight, I get service. May just be something that silly. I'm going in to look at my radio to ensure the flash was succesful considering I am having an issue with it all together. However my phone reads as an 883 on Google Play, when I hook up to PC, it says something about XT862 drivers are working correctly

Motorola Phones can be sim card sensitive/picky may need a new sim card. even if it works in another phone.
Did you check build prop permissions?
---------- Post added at 02:50 PM ---------- Previous post was at 02:46 PM ----------
rw-r--r--
or
.......... Read Write Execute
Owner .....x ...... x
Group .....x
Others ....x
or
0644

I don't know how to do that, or what you mean. I am looking at the build prop now, but can you tel me where to look, SD Shadow?
Also, when hooked to PC, it reads as an XT883, just so it is known the radio was flashed.
Got permissions. However it just says
Owner, Group and Others, which I checked off the way you said. None of the other things. but the checks were way differant.Is there anything differant for the special permissions? none are checked.
I checked what was stated above. all is still the same. no service available.

which root explorer are you using?

I am using root explorer from Speed software. the one that cost 3.99
I also did a factory reset. kept the build.prop and all. Kind of debating to try the whole thing over. Or is there maybe a couple places to look to ensure everything is in its proper place?

CPLSeraphim said:
I am using root explorer from Speed software. the one that cost 3.99
Click to expand...
Click to collapse
long press on build prop>Permissions

sd_shadow said:
long press on build prop>Permissions
Click to expand...
Click to collapse
got that done. stilll the same.

I guess tomorrow I will buy another $60 kit from walmart with the straighttalk Sim and $45 monthly plan. A little discouraging since the last time I did, the $45 card didn't work because they checked it out wrong. What sucks is I got this new SIM from Straight talk CS because mine messed up, and now I get to blow more money and hope walmart doesn't mess it up this time. I guess I will see tomorrow if it was the Sim Card.
I am getting frustrated, moreso because this phone is pretty awesome, and does some amazing things. Never thought I could play N64 and PS1 on a phone. I just need to make calls. I'm not tech savvy, but these directions are right on the mark, and I know everything was done right, so it's gotta be the SIM. If it is not the SIM, I guess I will be back at square 1 tomorrow.

I did some testing, I think the radio is not getting changed.
Baseband should be n_16.18.16s with or without sim card
see Menu>settings>about phone>baseband
if it is saying unknown, reflash original .890 radio
copy to the fastboot folder from the unzipped unlock.zip file
then reboot phone to ap fastboot mode
and in command prompt
cd desktop
cd fastboot
moto-fastboot flash radio radio2.img
moto-fastboot reboot
baseband should be unknown
unless you still have 890/906 build prop, then it will be N_03.18.29P
then
reflash the XT883 radio
moto-fastboot flash radio radio.img
moto-fastboot reboot
you are getting
sending radio 14404 kb ... okay
writing .....okay
phone is rebooting, and it is showing a screen with a progress bar and it is taking a few to complete? before finishing booting?

Ok, I am going to try that. Baseband says unknown, even though model number says XT883
Ok, I flashed the old radio, thanks for that file, and it still said unknown. reflashed the new radio again
sending radio 14404 kb ... okay
writing .....okay
phone is rebooting, and it is showing a screen with a progress bar and it is taking a few to complete.
I'll be dammed. I got the roaming triangle and a box with a plus sign where the signal goes. says no sim as well... got the baseband number as well. must not have flashed right the first time...
UPDATE: Ok, so I reflashed the radio.. had some funky stuff go on... then remembered again the whole basement thing, so I went to a window. I am now able to make calls and revieve and txt either way. Now that it is all solved, I just have to do my APN.
Thanks you SD_Shadow. I never was going to figure out the radio did not flash... Thanks for your insights and patients, and the files to restore the other radio.

great, your welcome.
Sent from my XT894 using Tapatalk

Related

RC30+ G1 without SIM? [SOLVED]

Hey everyone and before I start I would like to say thank you for everyone that helps and any help is greatly appreciated!
Ok, so I bought an unlocked T-Mobile G1 off of eBay and I plan to use it on the Rogers Canada network. I inserted my friends Rogers SIM and it works perfectly, just he has no data plan so I was unable to get past the enter your gmail account screen. I will get a Rogers SIM card for myself soon, but seeing as I just spent $450 on the phone I don't have much money left to pay for a plan right away, but I would still like to be able to use the phone for things like internet over WiFi and such until then.
I believe the phone has RC30 on it or higher because as I read here if I enter "<enter>reboot<enter>" and nothing happens I have RC30 or higher. Does this mean I am going to have to wait until I have a data plan with Rogers to begin using my new toy?
Thanks again for any help,
Brad
cant you skip the gmail account part?
bradtraver said:
Hey everyone and before I start I would like to say thank you for everyone that helps and any help is greatly appreciated!
Ok, so I bought an unlocked T-Mobile G1 off of eBay and I plan to use it on the Rogers Canada network. I inserted my friends Rogers SIM and it works perfectly, just he has no data plan so I was unable to get past the enter your gmail account screen. I will get a Rogers SIM card for myself soon, but seeing as I just spent $450 on the phone I don't have much money left to pay for a plan right away, but I would still like to be able to use the phone for things like internet over WiFi and such until then.
I believe the phone has RC30 on it or higher because as I read here if I enter "<enter>reboot<enter>" and nothing happens I have RC30 or higher. Does this mean I am going to have to wait until I have a data plan with Rogers to begin using my new toy?
Thanks again for any help,
Brad
Click to expand...
Click to collapse
~sigh~ there's already a guide on how to activate your phone using WiFi without the data plan. Go search it up. Once you can access the phone, you can check your version by going into Settings>About Phone if its over RC30, then just downgrade to RC29 and root it using the guide. Also, you can look up the Roger APN settings and just manually add it in to temporarily use the data connection to activate the phone and then just turn it off when you're done. That's what I did. Once you get to the activate screen, just hit menu, APNs, then add APN and google the Roger Network APN settings and enter those in.
How do I downgrade from RC30+ to RC29? All the tutorials I have found say I need to change the settings (which I can not do because I can not get past the No Sim Card / Emergency Call screen).
Could I follow this tutorial (minus the unlocking) and put in the Rogers APN using the EDGE connection to activate it?
bradtraver said:
Could I follow this tutorial (minus the unlocking) and put in the Rogers APN using the EDGE connection to activate it?
Click to expand...
Click to collapse
Yes, that's what I was trying to say above...
h.nocturna said:
Yes, that's what I was trying to say above...
Click to expand...
Click to collapse
Ok, thanks. I just wasn't sure which tutorial you were refering to and if I could use EDGE instead of 3G to set it up.
Ok, so I got a SIM card, got it activated, got these apn settings (i found when i put 720 for mnc instead of 72 the EDGE logo showed up) and it shows 4 bars for signal and it shows the E logo with the up and down arrows but it still says my SIM card is not provisioned for data services, but it is. Any help?
Thanks,
Brad
*Edit*
I just realized that the up and down arrows even flash white every once in a while while it tries to communicate with google but it still fails. I really want to use my phone
bradtraver said:
Ok, so I got a SIM card, got it activated, got these apn settings (i found when i put 720 for mnc instead of 72 the EDGE logo showed up) and it shows 4 bars for signal and it shows the E logo with the up and down arrows but it still says my SIM card is not provisioned for data services, but it is. Any help?
Thanks,
Brad
*Edit*
I just realized that the up and down arrows even flash white every once in a while while it tries to communicate with google but it still fails. I really want to use my phone
Click to expand...
Click to collapse
Try the WiFi method.
I can not figure out how to run the adb program. I installed RC29 and enabled adb on the G1 but I can not get the program to run on my computer..
bradtraver said:
I can not figure out how to run the adb program. I installed RC29 and enabled adb on the G1 but I can not get the program to run on my computer..
Click to expand...
Click to collapse
What's wrong with the adb on your computer? Its hard to help when I don't know what's wrong.
Sorry, I didn't mean anything is wrong with it, just I can not figure out how to run it.. I read that I have to install eclipse and then update it with adb here, is this correct?
bradtraver said:
Sorry, I didn't mean anything is wrong with it, just I can not figure out how to run it.. I read that I have to install eclipse and then update it with adb here, is this correct?
Click to expand...
Click to collapse
? Shouldn't be that hard. Just grab the SDK from somewhere, its everywhere, just use google. Then once you have it, you go under tools and you should see the adb.exe as well AdbWinApi.dll, take both of those, and copy them to c:\android (make a new folder). Then plug the phone into the computer, but do not mount it. Go to device manager and look for the Android Device (or whatever it may be called). Update the drivers to the ones found under usb_drivers from the SDK and you should have adb up and running.
To use it, go into command prompt (cmd) and type:
cd c:\android
then from there, run your adb commands.
It worked! I cant thank you enough!
bradtraver said:
It worked! I cant thank you enough!
Click to expand...
Click to collapse
No problem, this is what this forum is for, could you do us a favor and added [SOLVED] to your title so others know?
Will do, one thing though.. How do I change it?
bradtraver said:
Will do, one thing though.. How do I change it?
Click to expand...
Click to collapse
Edit your first post and change the title from there.
I would like to say, just to follow up I am now getting to know my way around ADB fairly well, I have updated my phone to Cupcake, realized I wanted a rooted phone, downgraded to RC29, updated to JFv1.41 because I couldn't find a working 1.51 build online, then am updating to 1.51 now. I would just like to say thank you so much, I have learned everything here so far and can not thank you enough!
-Brad
Again, you're very welcome.

[Q] Any software that would mess up modem to prevent signal?

Before I buy another used Captivate to swap motherboards, I'd like to know if there's anything else I should look at.
Scenario: Bought used Captivate with bad USB port and running CM9 Beta. Once I finally got my SIM card, I had no network signal (couldn't even find any operators when you search for them). Redid the APNs multiple times though those seem to be for Internet and MMS rather than cell. Wifi works fine. Flashed to CM 9.1 stable. No difference. Verified phone is unlocked. Verified IMEIs match. Verified baseband was listed. Verified my phone # is listed. Flashed to CM 7.1. No difference. I wanted to flash to stock but can't because Mobile Odin won't work with CM's partition layout. Thus, it seems I am stuck with CM or MIUI.
Is there anything in efs or another system directory that could prevent me from getting a signal?
topshot said:
Before I buy another used Captivate to swap motherboards, I'd like to know if there's anything else I should look at.
Scenario: Bought used Captivate with bad USB port and running CM9 Beta. Once I finally got my SIM card, I had no network signal (couldn't even find any operators when you search for them). Redid the APNs multiple times though those seem to be for Internet and MMS rather than cell. Wifi works fine. Flashed to CM 9.1 stable. No difference. Verified phone is unlocked. Verified IMEIs match. Verified baseband was listed. Verified my phone # is listed. Flashed to CM 7.1. No difference. I wanted to flash to stock but can't because Mobile Odin won't work with CM's partition layout. Thus, it seems I am stuck with CM or MIUI.
Is there anything in efs or another system directory that could prevent me from getting a signal?
Click to expand...
Click to collapse
I've been with you on another thread so I know for a fact you've tried all that stuff. But I don't recall did you ever try to flash an new or different modem? If you haven't or just want to try a new one I attached the one I use. Or I can get you the link to a page with a whole lot of others to choose from.
Other than trying a new modem I'm at a loss as to what it could be besides hardware at this point. Btw were you ever able to test your sim card in another phone to make sure it's functioning? Or do you know anyone with an att sim that you could test your phone with?
Things you could try:
1. Turn the flight mode on and then turn it off and see if that helps.
2. Open the phone and see if the antenna's contact points are okay.
3. Open the nv_data.bin in efs directory and see if the value at the offset(you can search for the exact value) that stores the network lock flag is 00. If it is 01 then it is still locked. I know you checked for the lock already but it never hurts to double check. You could also take a look at nv.log and see if there is anything there at the end that might be helpful. You could also check for lock by dialing *#7465625#.
m1batt1 said:
Other than trying a new modem I'm at a loss as to what it could be besides hardware at this point. Btw were you ever able to test your sim card in another phone to make sure it's functioning? Or do you know anyone with an att sim that you could test your phone with?
Click to expand...
Click to collapse
My next move was to flash some other modems actually, but I may wait until after tomorrow (see below). I tried to swap with my SIL who is on the same service but her phone takes the micro SIM. I'll try again Wed night with another choir member that has an ATT S2 I think.
uhm said:
Things you could try:
1. Turn the flight mode on and then turn it off and see if that helps.
2. Open the phone and see if the antenna's contact points are okay.
3. Open the nv_data.bin in efs directory and see if the value at the offset(you can search for the exact value) that stores the network lock flag is 00. If it is 01 then it is still locked. I know you checked for the lock already but it never hurts to double check. You could also take a look at nv.log and see if there is anything there at the end that might be helpful. You could also check for lock by dialing *#7465625#.
Click to expand...
Click to collapse
1. No help.
2. Where are the contact points? I've not found any schematic or disassembly instructions for this phone. I can see the external antennae connector, of course.
3. That was how I verified it was unlocked. All the bits in the appropriate area were 00. I'll have to look at the log file.
How would I dial any service code with no service? It tells me "mobile network not available" once I hit the Phone button.
New Info
I'm really hoping this is the answer to all my headaches the past several days trying to figure out why this phone won't get service. I just spent the past hour on the phone with my OLD carrier trying to re-activate my OLD phone with a different number to give to my son. We had to jump through a bunch of hoops because my old line was still "suspended" because of the port order. It is due to be "deleted" tomorrow. So even though my NEW carrier said activation was complete and my OLD phone stopped making and receiving calls 8 days ago, could the fact my number has been "suspended" be the reason I can't see any GSM networks?
Sadly my SIM worked in another phone but his didn't in mine.
Looks like I have a mini netbook.
topshot said:
Sadly my SIM worked in another phone but his didn't in mine.
Looks like I have a mini netbook.
Click to expand...
Click to collapse
Any luck changing modems?
Sent from my SGH-I897 using XDA
m1batt1 said:
Any luck changing modems?
Click to expand...
Click to collapse
I flashed back to CM 9.1 and then flashed in XXJVU - 12/28/2011
are you getting a good signal strength? that would veify antenna is okay.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
laughingT said:
are you getting a good signal strength? that would veify antenna is okay.
Click to expand...
Click to collapse
I'm not getting ANY signal. It always shows -110 dbM or less and 0 or 1 asu. The seller said the GPS worked fine, but I don't get a lock on that either (but maybe you need to "fix" the GPS with each ROM flash?). I've only been concerned with cell service at this point.
I'm going to pick up another Captivate in another hour. I'd like to root and unlock it right there to make sure it works, but don't think I'm that good yet to do quickly and safely. Assuming it's running KK4, the Easy Root pgm seems simple enough to root. May also try SuperOneClick.
For unlocking, I'd hoped to use Galaxy_S Unlock, but couldn't figure out how to get it onto my micro SD card to load onto the other phone.
The "new" Captivate works. It came with KK4 and a good USB port. I'll flash something onto it soon once I learn how to properly back up everything.
glad your new one works.
re: old phone gps. i think you may need to edit gps.conf in etc folder to set gps mode to standalone, rls the gps wants a network connection. in standalone mode, expect a v long time to lock, like 15 minutes.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
topshot...
While u r on kk4 see this post for gps fix... http://forum.xda-developers.com/showthread.php?p=19422197.
Sent from my SAMSUNG-SGH-I897 using xda premium
If you start the phone without a sim card in it, does it detect its absence and vice versa too? If that functions properly then another possibility could be that the IMEI of the phone might be blacklisted. It might have been reported as stolen. You could call your carrier to find that out.
uhm said:
If you start the phone without a sim card in it, does it detect its absence and vice versa too? If that functions properly then another possibility could be that the IMEI of the phone might be blacklisted. It might have been reported as stolen. You could call your carrier(AT&T I suppose) to find that out.
Click to expand...
Click to collapse
Yes, it detected whether a SIM was in it or not. When I had signed up for the new service it had said the IMEI was OK. I guess that doesn't mean it stayed that way. I would think that would just prevent you from accessing the service, not prevent you from detecting a signal at all. When I picked up the second used Captivate, his SIM card had been deactivated, but it still showed it was getting a signal.
topshot said:
Yes, it detected whether a SIM was in it or not. When I had signed up for the new service it had said the IMEI was OK. I guess that doesn't mean it stayed that way. I would think that would just prevent you from accessing the service, not prevent you from detecting a signal at all. When I picked up the second used Captivate, his SIM card had been deactivated, but it still showed it was getting a signal.
Click to expand...
Click to collapse
Once I had my efs folder deleted while flashing a rom and my IMEI defaulted to some value and it showed no signal at all. I checked IMEI and realized it was a different one and that led me to look at the efs. Once I restored the efs folder from my back up, all was fine again. Therefore I think if your IMEI is blacklisted it could happen and hence made that suggestion to call your carrier. Your carrier might also be able to tell you if your phone made any attempts to register on their network or not.

Workig Bionic on T-MO Running official ICS OTA update guide

Success!!!
This is a step by step that I used and it worked(Tmobile) for official release ICS:
01. Update to ICS
02. Power off phone and wipe data in Stock Recovery
03. Power on phone and edit the hex values with Radiocomm see: post 29/30 http://forum.xda-developers.com/showthread.php?t=1297714&page=3
04. Power off phone
05. Remove sim card
06. Power phone back on
07. Connect to PC
08. Root
09. Delete STK.apk (edit: you no longer have to delete, just rename to stk.apk.bak)
10. Delete STK.odex (edit: you no longer have to delete, just rename to stk.odex.bak)
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
12. Power off phone
13. Insert SIM
14. Power on!
15. Dial *#*#info#*#* switch to WCDMA Preferred
Should be good to go!
I'm sorry, but I need to ask a question that is probably frustratingly obvious,
When I go to use the RadioComm tool, the instructions says to put the phone in PC mode. I can't find PC mode on the phone, and whenever I try to use RadioComm, everything is red... the blood-red of failure...
How did you get around this? I've only had the phone for an afternoon (I'm enabling TMobile for a friend) so maybe I just don't know where the button for PC mode is!
Thanks for this. I was about to give up. I thought it was required to downgrade to the last GB rom (which is, apparently, impossible). I'm glad to give this a shot.
Sompom said:
I'm sorry, but I need to ask a question that is probably frustratingly obvious,
When I go to use the RadioComm tool, the instructions says to put the phone in PC mode. I can't find PC mode on the phone, and whenever I try to use RadioComm, everything is red... the blood-red of failure...
How did you get around this? I've only had the phone for an afternoon (I'm enabling TMobile for a friend) so maybe I just don't know where the button for PC mode is!
Thanks for this. I was about to give up. I thought it was required to downgrade to the last GB rom (which is, apparently, impossible). I'm glad to give this a shot.
Click to expand...
Click to collapse
Press the menu (at the left bottom corner), then system settings, choose developer options, then click usb debugging. Connect the usb cable to the pc. usb debugging connected displayed on the top left corner. Slide the usb icon down, tag the connected as media device, then click media device (MTP).
---------- Post added 27th October 2012 at 12:19 AM ---------- Previous post was 26th October 2012 at 11:57 PM ----------
DBoyFresh954 said:
Success!!!
This is a step by step that I used and it worked(Tmobile) for official release ICS:
01. Update to ICS
02. Power off phone and wipe data in Stock Recovery
03. Power on phone and edit the hex values with Radiocomm see: post 29/30 http://forum.xda-developers.com/showthread.php?t=1297714&page=3
04. Power off phone
05. Remove sim card
06. Power phone back on
07. Connect to PC
08. Root
09. Delete STK.apk
10. Delete STK.odex
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
12. Power off phone
13. Insert SIM
14. Power on!
15. Dial *#*#info#*#* switch to WCDMA Preferred
Should be good to go!
Click to expand...
Click to collapse
Confirm it works on ATT. Thanks
wnandroid said:
Press the menu (at the left bottom corner), then system settings, choose developer options, then click usb debugging. Connect the usb cable to the pc. usb debugging connected displayed on the top left corner. Slide the usb icon down, tag the connected as media device, then click media device (MTP).
Click to expand...
Click to collapse
Haha... It turned out to be just as stupid an error as I thought it would be... I didn't have the correct drivers installed -.- . I installed MotoCast, rebooted, tried again, and it worked! Yay.
Thank you!
Also, more notes for people who are as moto-clueless as me:
Stk.apk and Stk.odex are in /system/app
build.prop is in /system
It now accepts my Tmobile SIM, but it can't find any service. I've looked around, and it seems that lots of people with TMobile are having no luck with stock ICS, but ATT works fine. Any ideas? I changed ro.telephony.default_network=7 to =0 because that's how it appears in my TMobile MyTouch 4G Slide.
Sompom said:
Haha... It turned out to be just as stupid an error as I thought it would be... I didn't have the correct drivers installed -.- . I installed MotoCast, rebooted, tried again, and it worked! Yay.
Thank you!
Also, more notes for people who are as moto-clueless as me:
Stk.apk and Stk.odex are in /system/app
build.prop is in /system
It now accepts my Tmobile SIM, but it can't find any service. I've looked around, and it seems that lots of people with TMobile are having no luck with stock ICS, but ATT works fine. Any ideas? I changed ro.telephony.default_network=7 to =0 because that's how it appears in my TMobile MyTouch 4G Slide.
Click to expand...
Click to collapse
Try using my build.prop file. Heres the link to my post. http://forum.xda-developers.com/showthread.php?p=33261067
Sent from my DROID BIONIC using xda app-developers app
Do you have it working on T-Mobile? I gave it back to him this morning, but I sent him idiot-quality instructions to replace the build.prop. He says it doesn't work. He's on prepaid, so he as decided to just switch to Verizon. (This is a great idea where we live, T-Mobile has 2G and Verizon has 4G...) I hope this is an isolated instance rather than a generic problem with T-Mobile on the Bionic.
If I'm walking with him past an ATT store, I'll see if they'll let me try a SIM, so see if it was just me or if it's locked (or something?)... Unfortunately, there aren't many ATT stores for hours of where we live
Sompom said:
Do you have it working on T-Mobile? I gave it back to him this morning, but I sent him idiot-quality instructions to replace the build.prop. He says it doesn't work. He's on prepaid, so he as decided to just switch to Verizon. (This is a great idea where we live, T-Mobile has 2G and Verizon has 4G...) I hope this is an isolated instance rather than a generic problem with T-Mobile on the Bionic.
If I'm walking with him past an ATT store, I'll see if they'll let me try a SIM, so see if it was just me or if it's locked (or something?)... Unfortunately, there aren't many ATT stores for hours of where we live
Click to expand...
Click to collapse
Yes I have it working on T-Mobile here's a screenshot. The reason 3g/hspa+(4g) doesn't work for T-Mo everywhere with the Bionic is because they are in the process of switching bands to the standard 1900mhz band in the US. ATT users get full use of their band and 3g/hspa+(4g)
Sent from my DROID BIONIC using xda app-developers app
DBoyFresh954 said:
08. Root
09. Delete STK.apk
10. Delete STK.odex
11. Modify Build.prop values as is:
ro.telephony.default_network=7
ro.mot.phonemode.vzw4gphone=0
telephony.lteOnCdmaDevice=0
and add this to the bottom:
ro.telephony.ril.v3=signalstrength
Click to expand...
Click to collapse
that is the part i need explained a bit more.
also Don't T mobile and ATT run on the same Networkish...
I've got a ST(ATT) Sim card for my Droid bionic works fine, cept when i updated to ICS i can no longer send SMS/MMS. Been searching for about 10 days now. no fix.
scarocean said:
that is the part i need explained a bit more.
also Don't T mobile and ATT run on the same Networkish...
I've got a ST(ATT) Sim card for my Droid bionic works fine, cept when i updated to ICS i can no longer send SMS/MMS. Been searching for about 10 days now. no fix.
Click to expand...
Click to collapse
Yes they have the same type of network but they work on different bands. ATT=1900mhz T-Mo=1700mhz(switching to 1900mhz by end of year) The reason SMS/MMS isnt working is because you need to modify the build.prop file in your root folder. Ive attached the 1 click root program for the Bionic, use this to root your phone. After you root your phone you will need to download some type of root explorer so that you can access the root folder. You no longer have to delete the STK files just rename them with .bak extensions. They are located in /system/app. Then access /system and switch to R/W mode. You have to edit build.prop with the values in the guide.
T-Mobile AND AT&T
DBoyFresh954 said:
Yes they have the same type of network but they work on different bands. ATT=1900mhz T-Mo=1700mhz(switching to 1900mhz by end of year) The reason SMS/MMS isnt working is...
Click to expand...
Click to collapse
Works, but i'm only pulling 'Edge' Network. No 3g like before
Thank you VERY much. But i've got some information and a question...
I was too excited to try what you said to do so i didn't go back and read the instructions on post #1.
My phone had the SIM already still in it.
WCDMA was selected
Hex was still set to AT&T/Tmobile.
Then...
-- I Root it.
-- I edit files as given above.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Powercycle.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Reboot, wipe cache, wipe data/factory reset.
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
--Input APN for ST(att)
SMS/MMS work!!
Voice works
DATA works! ( Shows Edge2 )
My question is, Booted up on: GSM/CDMA Auto (PRL)
GSM = -80dBm
Network: home. ( i have never heard of this.)
IMEI: unknown
my phone number shows on *#*#info, and under phone information -unlikebefore it did not. Yet my IMEI isn't showing... It did before.
The network i had before i made these changes phone displayed ATT as network, not it is 'home'
network type before was HSPA/HSPA+/Edge, not it is just EDGE2.
So i'm not on ATT like before, i am on GSM?
When I send SMS/MMS to my other phone it takes 20 seconds to 5 minutes to show up on her phone.
When I am sent SMS/MMS it takes just as much time to show up on mine.
after about 20 minutes of running the phone SMS send normal speed.
I never did do the "then access /system and switch to R/W mode." Because I don't know what you mean.
when i switch to WCDMA preferred, it took about 3 minutes to load up a signal, The network type is still 'home' before all this it used to be 'ATT'
scarocean said:
Works, but i'm only pulling 'Edge' Network. No 3g like before
Thank you VERY much. But i've got some information and a question...
I was too excited to try what you said to do so i didn't go back and read the instructions on post #1.
My phone had the SIM already still in it.
WCDMA was selected
Hex was still set to AT&T/Tmobile.
Then...
-- I Root it.
-- I edit files as given above.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Powercycle.
NOTHING CHANGED! CANT SEND SMS STILL!!!
-- Reboot, wipe cache, wipe data/factory reset.
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
--Input APN for ST(att)
SMS/MMS work!!
Voice works
DATA works! ( Shows Edge2 )
My question is, Booted up on: GSM/CDMA Auto (PRL)
GSM = -80dBm
Network: home. ( i have never heard of this.)
IMEI: unknown
my phone number shows on *#*#info, and under phone information -unlikebefore it did not. Yet my IMEI isn't showing... It did before.
The network i had before i made these changes phone displayed ATT as network, not it is 'home'
network type before was HSPA/HSPA+/Edge, not it is just EDGE2.
So i'm not on ATT like before, i am on GSM?
When I send SMS/MMS to my other phone it takes 20 seconds to 5 minutes to show up on her phone.
When I am sent SMS/MMS it takes just as much time to show up on mine.
after about 20 minutes of running the phone SMS send normal speed.
I never did do the "then access /system and switch to R/W mode." Because I don't know what you mean.
when i switch to WCDMA preferred, it took about 3 minutes to load up a signal, The network type is still 'home' before all this it used to be 'ATT'
Click to expand...
Click to collapse
Some people reported having to wait anywhere from 5 mins to over an hour before the phone fully switched to GSM mode...
Sent from my DROID BIONIC using xda app-developers app
Just follow everything step by step. I learned the hard way that if you deviate even just a little it wont work...
Sent from my DROID BIONIC using xda app-developers app
DBoyFresh954 said:
Yes I have it working on T-Mobile here's a screenshot. The reason 3g/hspa+(4g) doesn't work for T-Mo everywhere with the Bionic is because they are in the process of switching bands to the standard 1900mhz band in the US. ATT users get full use of their band and 3g/hspa+(4g)
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
T-Mobile is in the process of a complete "re-farm" mainly to make their network iphone compatiple. This means that everything on the network should be operating on the 1900mhz band by spring/summer 2013 which is when they are rumored to be getting the iphone. Regardless, if they still don't offer the iphone this refarm allows any unlocked iphone to be used on their network and get full HSPA+. You can bring an unlocked iphone into their store now and they'll put it on their network but if you don't live in an area where the re-farm is complete you'll only get EDGE access.
This update also applies to any other phone that operates on the 1900mhz band, not just the iCrap. T-Mo also just bought MetroPCS which, in itself, is not a huge deal as far as coverage goes BUT they also get all of Metro's spectrum (plus the spectrum they got from ATT and the failed merger) so they are actually lining themselves up to be the carrier with the most available spectrum as the FCC only has so much to auction off. I am seriously considering jumping ship for them even with my grandfathered unlimited data. They've got unlimited everything for cheaper but I have to see how service is.
I honestly was not aware the Bionic was HSPA+... probably just from not researching it as I have VZW anyway right now... My contract is up in March and even though I am grandfathered unlimited I might give them a shot. They actually charge less for "bring your own phone" and their deals are pretty good. Wife wants iphone and with the re-farm she could have one on T-Mo but her contract is not up till March 2014 so the ETF plus unlocked iphone... $1k... um no... Maybe when she sees how awesome ICS is vs GB she'll change her mind...
scarocean said:
Works, but i'm only pulling 'Edge' Network. No 3g like before
turn phone on: FULL BARS! (had to wait 1-2 minutes. and input SIM password)
Had Voice, but the calls kept failing
Click to expand...
Click to collapse
can I ask what you mean when you say you input sim password? Im trying to get it to work on t-mobile... Well I have 2 bionics, one is mine and I got t-mobile working fine using the radiocomm edit, removing the apk/ and odex file listed by DBoyFresh954 and doing the build prop edit listed by him in the same first post. but the 2nd bionic is my friends and I cant get t-mobile working on it. The only thing thats not the same on the two bionics is my friends is HW B 43/11 while mine is HW A 34/11. If anyone might have a fix or can explane the sim unlock that scarocean was talking about please do post or pm me would be most thankful
HELP!!
Okay, so I got my T-Mobile SIM card in today. Followed everything perfectly and still nothing. No service or anything. I double checked my area for coverage and confirmed that T-Mobile does have service here. I'm on stock 246. I rooted, applied the gsm unlock zip, re-named the stk files, edited the build.prop settings, and switched to WCDMA Preferred. I have the HW B version if that matters. I've been looking everywhere and can't seem to find an answer. Could somebody help please?!
Edit: My phone is now showing AT&T as the network. Also noticed that my Signal is reading -81 dBm and 16 asu. Isn't that a good signal?
trulunacy said:
Okay, so I got my T-Mobile SIM card in today. Followed everything perfectly and still nothing. No service or anything. I double checked my area for coverage and confirmed that T-Mobile does have service here. I'm on stock 246. I rooted, applied the gsm unlock zip, re-named the stk files, edited the build.prop settings, and switched to WCDMA Preferred. I have the HW B version if that matters. I've been looking everywhere and can't seem to find an answer. Could somebody help please?!
Edit: My phone is now showing AT&T as the network. Also noticed that my Signal is reading -81 dBm and 16 asu. Isn't that a good signal?
Click to expand...
Click to collapse
I followed post #1 exactly and my Bionic works on T-Mobile.
What do you mean where you said "applied the gsm unlock zip" --- Either I missed this part or do not understand what you are referring to.
Running rooted Bionic on Synergy ROM on T-Mobile.
I do have a question though....
How to prevent phone from going back to LTE when rebooting. Not the worst thing but have to modify the radio each time phone is rebooted???
Also the ones who got it to work as well, are you getting 3G??? I feel as though I am not....
Thanks again to the person who started Post #1 --- Saved me $$ from buying a new phone from T-Mobile.
huskersone said:
I followed post #1 exactly and my Bionic works on T-Mobile.
What do you mean where you said "applied the gsm unlock zip" --- Either I missed this part or do not understand what you are referring to.
Running rooted Bionic on Synergy ROM on T-Mobile.
I do have a question though....
How to prevent phone from going back to LTE when rebooting. Not the worst thing but have to modify the radio each time phone is rebooted???
Also the ones who got it to work as well, are you getting 3G??? I feel as though I am not....
Thanks again to the person who started Post #1 --- Saved me $$ from buying a new phone from T-Mobile.
Click to expand...
Click to collapse
I flashed a zip that does what you did in Radiocomm. I finally got fed up with the problems and went to AT&T and got a SIM with prepaid. Works great! I just could never get the T-Mobile SIM card to work. Didn't go to waste though. Unlocked my wife's Torch and used it for that.
I have no idea how to make the settings stick for reboots. Odd, that your settings don't stay on WCDMA Preferred. Mine stays after reboot.
I think the Bionic can only get 2G until T-Mobile has finished their refarm. I think there's only a couple that have been set. Don't quote me on that though. Haven't really looked into it a whole lot.
Sent from my AT&T DROID BIONIC using xda app-developers app
just a bit more about files and build prop
I have the droid bionic and I was attempting to get my at&t service on the bionic. I have made it as far as the root step. Where do I find the files to delete? I have a folder /system on my PC but I can't find /system on the bionic. Where is the /system/app folder? Do I need to use device manger find it? A few more details would be much appreciated. a list of files and programs needed would be a nice addition to walkthrough. Just a thought. Plz help thanks
semipro bionic said:
I have the droid bionic and I was attempting to get my at&t service on the bionic. I have made it as far as the root step. Where do I find the files to delete? I have a folder /system on my PC but I can't find /system on the bionic. Where is the /system/app folder? Do I need to use device manger find it? A few more details would be much appreciated. a list of files and programs needed would be a nice addition to walkthrough. Just a thought. Plz help thanks
Click to expand...
Click to collapse
Download ES File Explorer. Hit the menu button once you open it and go to settings. Scroll down to root settings and select all options. Go back to the main menu and hit the Up button at the very top. Scroll down and click on "System." Once in you'll see the "App" folder immediately. Click on that and scroll down to the STK apk's. Once your done renaming go back once and scroll down till you find the build.prop. Click it and use the ES note editor to edit the settings.
As far as adding the signal strength to the build.prop goes just scroll all the way down and add it there.
Sent from my AT&T DROID BIONIC using xda app-developers app
When you do this edit, can you switch back to Verizon's CDMA/LTE by switching sim cards or do you need to redo both the apks and Hex edit?

Dangers Of Messing With Your Phone

Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.
Kdenery said:
Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.
Click to expand...
Click to collapse
Have you tried simply running the latest RUU and reverting it back to stock?
**edit** http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint
Kraizk said:
Have you tried simply running the latest RUU and reverting it back to stock?
**edit** http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint
Click to expand...
Click to collapse
Yes, twice
This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.
jamesissocool said:
This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.
Click to expand...
Click to collapse
I'm going to try this now thanks
jamesissocool said:
This is not an uncommon problem but it happens with certain HTC ones and not others. I have helped a few other people with this issue. Most likely, your current ROM is set to RUIN/SIM in Settings-> More-> Mobile Network -> Subscription settings. It needs to be set to NV. If you can't get to this setting, you need to flash a ROM that has the setting available. CM 10 based ROMs all seem to have it. If your phone does not automatically reactivate, you can flash to a stock ROM and use the handsfree activation function and that should get you back up.
Click to expand...
Click to collapse
Okay so i just flashed a CM 11 build. and Holy S*** I have ******* service! I cant make calls, it says it's not authorized. And i don't see the option you were talking about, in mobile network, i see , Data Enables, Data Roaming, Preferred Network type, System select, (then grayed out) Access Point Names and Network operators, (then not grayed out) carrier settings. When i click carrier settings it says "Unfortunately, the process com.android.phone has stopped. and it takes me back a screen.
where do i go from here?
Kdenery said:
Okay so i just flashed a CM 11 build. and Holy S*** I have ******* service! I cant make calls, it says it's not authorized. And i don't see the option you were talking about, in mobile network, i see , Data Enables, Data Roaming, Preferred Network type, System select, (then grayed out) Access Point Names and Network operators, (then not grayed out) carrier settings. When i click carrier settings it says "Unfortunately, the process com.android.phone has stopped. and it takes me back a screen.
where do i go from here?
Click to expand...
Click to collapse
Try flashing a CM10 ROM. I've always seen the option there. The kitkat ROMs I have used do not have the option except for the Nocs GE.
Kdenery said:
Hello, everyone, I'd like to share my experience, get any help if someone can, and warn some future people.
So a few months ago i rooted and ROM swapped my HTC one. It was great, I loved it, it was fast and simple.
I tried to change the ROM on it the other day and everything went down hill form there. Basically I ended up having no service and everything else seeming to work fine. So after spending an entire day trying to fix it with BD619, i had to call my carrier today. Now i have the sprint phones, and the sprint service, but i have Credo as a carrier. God knows why. They essentially gave me nothing saying my phone must be bricked and they can't help me.
One thing they did try however was to have me put in a ##xxxxx# number, and there i saw and could edit my MDN and MSID, instead of showing my my phone number and the MSID number they both had "No" written. So he had me edit it and put it in, but when i click "commit changes" it said "commit failed" so if anyone knows anything about that or could help me there, it'd greatly appreciated.
Lesson is, even if you think you know what you are doing, and are careful, weird stuff can happen, and if you have an Odd carrier version of an already less support model of phone (the sprint version), then be EXTRA careful.
Click to expand...
Click to collapse
The only way something like this happens is one of two things.....
1. Ur a noob
2. Your a dev and your testing ril on your rom
The only way to fix this which is a cleared meid of some sort......flashing cm10.1 is the only way and aquiring service by switching to nv....once there everything is fixed just flash/restore back to your rom.
Sent from my HTCONE using Tapatalk
-TheEdge- said:
The only way something like this happens is one of two things.....
1. Ur a noob
2. Your a dev and your testing ril on your rom
The only way to fix this which is a cleared meid of some sort......flashing cm10.1 is the only way and aquiring service by switching to nv....once there everything is fixed just flash/restore back to your rom.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
i'd kinda like to argue a point here as this just happened to me. i am certainly not new to flashing, starting back with the mogul and having almost every sprint smart phone since then unlocked (windows) or rooted (webos and android).
Using TWRP and previously running ecliptic 4.3 i wiped caches, system and data then installed the 4.4.2 from team d3rp and voila... no service no meid no nothing.... yes i have the latest radio on my phone.
i guess my point in this is that there's a number 3 that you didn't mention.
3. sh!t happens and it's not n00b related.
for anyone else that has this issue... flashing CM 10.1 worked for me. i didn't even have to set up anything, it just picked up signal. so i rebooted, wiped and nandroided back to 4.3 and all is well.
Did you flash a rom that was meant for another carrier?
Sent from my SM-N900P using XDA Premium 4 mobile app
Robert542 said:
Did you flash a rom that was meant for another carrier?
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I didn't... it was SuperOneK. i'm certainly not blaming the rom though. especially not when others are flashing it fine. the ONLY thing i can think of possibly happening is a bad download. I was in a rush and didn't check the md5.
I had a similar problem when flashing miui. Nothing worked. Even went back to a sense backup and nothing worked.
Commit failed as well.
Here's what I did to make it work again.
Flashed cm10. Change the network settings for CDMA. (Boom it SAID I had service..but didn't).
Rebooted a few times (probably not necessary).
Flashed a sense 4.3 ROM that was close to stock.
Update msl and all that. Commit.
For me..changed LTE/CDMA to just CDMA (no 4g in wv).
Boom it worked again. Hope this helps!
Sent from my HTCONE using xda app-developers app

Unlocking Sprint G Flex to Cricket/AIO/ATT Wireless

This tutorial is my method for successfully unlocking the G flex to Cricket/AIO/ATT wireless with data/MMS, No battery drain, no Wifi calling drain.
1. Pros. Use Cricket/AIO/ATT sim.
2. Cons. Must dial International code +1 ( or whatever country code you're in) before every 10 digit number.
********Before we start you need to be on stock 4.4.2 sprint rom with Network Mode LTE/CDMA enabled************
(The roaming option does not appear when on GSM)
Next, change theme from "FLEX" to "LG". For some reason FLEX bugs out after the phone unlocks and causes crashes. (May be an isolated incident)
*Now we need to add the APN from AIO wireless into the Apn list by going into settings>roaming>Access point names
*The APN list will be blank and state "NO APNS" this is normal. Hit the menu button and add the AIO wireless APN settings from
http://buzzmobile.us/aio-wireless-apn-settings-internet-mms/
When completed you will need to press the back button and once again you will be greeted with a blank APN screen. Don't worry it's there.
Follow the instructions for root + unlocking the phone here. Total commander doesn't work on 4.4.2, don't use it, do it all with Root Browser (Get from Play Store).
http://forum.xda-developers.com/showthread.php?p=50477852
After you are finished you should be rooted, successfully finished removing bloatware and left with a half unlocked phone.
Now navigate to settings/tethering and networks/mobile networks/Network Mode and change to GSM/WCDMA
**********************You are finished with this portion of the Tutorial***********************
*Fun Part*
1. Download Rom toolbox on your phone, the free/lite version is fine.
2. Navigate to build.prop editor
3. Find and change the settings listed..
ro.carrier=spr (spr to lowercase)
ro.build.target_operator=spr (spr to lowercase)
persist.service.crash.enable=1
Lets keep something in mind here... Once you change these settings you will need to restart your phone and you will be unlocked for Cricket/AIO/ATT networks, however, at this time you should know that if you venture back into network mode and happen to change your settings back to LTE/CDMA, you will lose the ability to change your network mode back to GSM UNLESS you revert the build.prop changes listed above. You can actively switch from LTE/CDMA and GSM by this method although I don't see why anyone would..
At this point you should have Talk/Text/Data/MMS...If not, you may have done something wrong.
**More funner part***
At this point in the tutorial your phone is doing two things.
1. It lies when it says its only on GSM/WCDMA
2. Rapidly draining the S#$% out of your battery.
We need the MSL Code so we may dial ##DATA# in your phone and access LTE settings.
Follow this Tutorial for retrieving your MSL code.
http://forum.xda-developers.com/showpost.php?p=47324060
After you obtain the MSL pull up the phone application and dial ##DATA#(3282) Navigate into LTE and disable LTE/Band 26/Band 41
When you back out of the menu your phone will restart and stop continuously looking for LTE Radio.
**Final touches**
Remove all and I mean ALL sprint and preloaded wifi calling applications if you experience wifi calling battery draining. For some reason wifi calling spazzes out.
I'm not going to list the apk's because it may be an isolated incident and if you find out wifi calling is draining your battery just long press it in battery stats and go to "APP INFO" and find out what it is named and remove it with root browser...
I have been on Cricket/AIO wireless for two weeks now with HSPA+ and enjoying it.
This method may work with other carriers who knows.
**Food for thought**
1. When I change the ro.carrier settings from lowercase spr to ndo like in the APN i got a cool h+ instead of GSM.
2. I have not been able to wifi tether yet with cricket and I'm actively looking for a way now..
3. Think anyone else has issues with the FLEX theme crashing?
thanks.
Sent from my VS980 4G using XDA Premium 4 mobile app
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
sweets55 said:
If you don't mind how much do you pay? Will this work with a T-Mobile Flex? I'm pretty happy with T-Mobile since I got my discount back. I have 4 lines so it's around 25 bucks in savings a month.
Click to expand...
Click to collapse
It should work with t-mobile, i don't see why not, instead of ATT/AIO apn's just add a Tmobile apn and make sure that you have some time to play with the build.prop settings for example...
ro.carrier = spr can be changed to ndo and still work because "in theory" it matches the APN.
After adding the tmobile apn setting, changing ro.carrier to " t-mobile" to match the apn might work .
Try it out and see!
p.s i would leave ro.build.target_operator=spr alone, if all else fails you can change this too.
Thanks for the guide . I picked up a sprint g flex and lg g2 cheap, used your guide on both. Enjoying them on NET10 in the states.
patiently waiting for a custom recovery for kitkat on the flex.
interesting thread. i keep running into an issue though. as soon as i reboot after changing the stuff it reverts to where i was before and nothing saved. any suggestions? root is fine...
awesome stuff here i really want to see this happen on my flex!
Wont allow apn change
so i got stuck with a simple issue. when i go into the apn list there is an apn there already.
cinet.spcs
and when i press the menu key it is not showing the add feature to be able to add the new apn as described in the thread.
after doing these I noticed when opening Wifi it force closes and says "Unfortunantley, Settings has stopped"
only wifi that works is the one i used before doing these mods wont allow adding others
also have tried various wifi repair apps
working for me but getting tons of systemui crashes
Concerning the errors that appear often but I came out I did this : I returned and change in the build prop, spr for SPR capitalized and not returned to me the problem also remove the option to persist crash : 0 , take into GSM mode UMTS network selection mobile. I'm in version 4.4
Not working for me.
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
fresnogamer said:
I tried this 3 times. Once with stock 4.4.2. Once downgraded to 4.2.2 and another time after updating back to 4.4.2 from OTA. All failed. Could not get any sim to be recognized. I am a smart guy and have done much more complicated methods of flashing, rooting, etc. for Android phones. But this just does not work. The phone states no SIM when I put my Cricket SIM in it. But when I put the Sprint SIM back, it reads it.
Any help would be GREATLY accepted. Thank you.
PS: I called Sprint because this is a clean phone. When I asked for the unlock code they gave me the MSL. I have a feeling that is incorrect but I could be wrong. After an hour on the phone, they said that is the unlock code. No matter how much I tried to tell them it's not.
Click to expand...
Click to collapse
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Supertacomonkeyexplosion said:
Maybe this is a better guide for you:
http://www.droidviews.com/how-to-sim-unlock-sprint-lg-g2-ls980/
The Sim unlock does work, I've been using my sprint g flex on cricket for 6 months or so , but only with H+ .
You don't really need the msl or have the phone in good standing (blacklisted is OK).
If the Sim isn't being recognized that means you didn't do the folder replacement right. I had trouble at this part, which was solved by using the app "ROM toolbox". It took a few tries.
As far as changing the APN , just use any shortcut app on the playstore.
For switching bands, use the app " network" from the playstore. No msl needed.
---------- Post added at 07:13 AM ---------- Previous post was at 07:09 AM ----------
Forgot to mention that I am on 4.4.2 ZVA, there seems to be a problem/troubles with this mod after this update. Definitely get rid of bloatware/sprint to stop updates
Click to expand...
Click to collapse
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
fresnogamer said:
Tried this method twice so far. Both times the phone reboots or I get multiple force closes that disable the use of the phone. Guess I'll keep trying. Thanks for the help.
Click to expand...
Click to collapse
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Supertacomonkeyexplosion said:
Did you use the files from my link? Flex specific?
Don't use total commander.
What software version are you on?
Even after the FC, does it recognize your Sim?
You must also change the build prop, just realize the guide doesn't have that. Probably why your getting FCs.
Save a copy before making changes:
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Click to expand...
Click to collapse
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
fresnogamer said:
Sorry for getting back to you so late. Life is busy with three kids and a full time job.
I wipped and followed the instructions again. VERY closely. It worked. Thank you very much.
Click to expand...
Click to collapse
Sweet. Glad you got it.
The only trouble I have had with this method is if the phone shuts off or I restart, I have to switch the bands back to GSM.
would this work on LS995ZVB? thanks.

Categories

Resources