As if I'd never touched it - One (M7) Q&A, Help & Troubleshooting

Is there a way to make it so my HTC One is back to complete factory settings. I want it back as if I'd never touched it. Unrooted, locked, S-ON, HTC Sence, stock firmware, etc.
I'm not so great at all this stuff, so some simple instructions rather than just a tonne of links would be great! Eg. flash this, do this, install this recovery, etc.
Thanks,
Joe

smartiejoe said:
Is there a way to make it so my HTC One is back to complete factory settings. I want it back as if I'd never touched it. Unrooted, locked, S-ON, HTC Sence, stock firmware, etc.
I'm not so great at all this stuff, so some simple instructions rather than just a tonne of links would be great! Eg. flash this, do this, install this recovery, etc.
Thanks,
Joe
Click to expand...
Click to collapse
Maybe you should start by describing what you did to your phone? Also post the output of fastboot getvar all except IMEI

alray said:
Maybe you should start by describing what you did to your phone? Also post the output of fastboot getvar all except IMEI
Click to expand...
Click to collapse
First off, it is rooted, has twrp recovery, a 4.4 GPE ROM and is S-OFF.
I'll get the fastoobt getvar all results for you.
C:\Minimal ADB and Fastboot>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.16.3250.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT368W908963
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3661mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae095083bf
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

smartiejoe said:
First off, it is rooted, has twrp recovery, a 4.4 GPE ROM and is S-OFF.
I'll get the fastoobt getvar all results for you.
C:\Minimal ADB and Fastboot>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.16.3250.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT368W908963
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3661mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae095083bf
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
you want to return it to stock like if you had never touched it.. So you want stock software, locked bootloader and S-ON ? If you are not sending your phone for a repair under warranty, I'll recommend you to keep unlocked bootloader and S-OFF or at least locked bootloader but S-OFF. Do you want to be on latest stock version? If yes then its almost impossible to s-off again on hboot 1.56.
What is your goal to restore your phone back to 100% stock?
Also need to know what operating system is on your computer.

alray said:
you want to return it to stock like if you had never touched it.. So you want stock software, locked bootloader and S-ON ? If you are not sending your phone for a repair under warranty, I'll recommend you to keep unlocked bootloader and S-OFF or at least locked bootloader but S-OFF. Do you want to be on latest stock version? If yes then its almost impossible to s-off again on hboot 1.56.
What is your goal to restore your phone back to 100% stock?
Also need to know what operating system is on your computer.
Click to expand...
Click to collapse
Just in case I do need to send it off for repair or replacement, I don't want a tampered device. Just don't want that risk. I'm running WIndows 7.

smartiejoe said:
Just in case I do need to send it off for repair or replacement, I don't want a tampered device. Just don't want that risk. I'm running WIndows 7.
Click to expand...
Click to collapse
You should keep s-off unless really necessary, not ''just in case''. If you need to send your phone for repair in the future, with s-off, you'll be able to remove the tampered flag and s-on again before sending it back to repair. But atm turning back S-ON is the risk you should not take imo.
Again if you go back to stock and update your phone to the latest version then it will be very difficult or even not possible to s-off again.
Im waiting your decision to guide you.

S-OFF is a gift and should never be taken for granted. If you throw it away it may not be available to you again.
S-ON is an operation I would defer until I learned that I actually *need* to send in the phone to someone who cares if it is S-ON or not.
S-ON is always the last step in any "going back to stock " process, the very last thing before the phone leaves your possession. And even then the step is usually optional. Warranty repair people often don't care, eBay doesn't care, it's just really rare that there is *any* actual benefit.
Sent from my HTC One using xda app-developers app

alray said:
You should keep s-off unless really necessary, not ''just in case''. If you need to send your phone for repair in the future, with s-off, you'll be able to remove the tampered flag and s-on again before sending it back to repair. But atm turning back S-ON is the risk you should not take imo.
Again if you go back to stock and update your phone to the latest version then it will be very difficult or even not possible to s-off again.
Im waiting your decision to guide you.
Click to expand...
Click to collapse
Okay, I think I'll stick with S-OFF, I just want a really stable build, as close to stock as possible. Decent battery life, decent speed, and not too much hassle to return to complete stock if necessary.
I'll take your advice on what you think is best!

smartiejoe said:
Okay, I think I'll stick with S-OFF, I just want a really stable build, as close to stock as possible.
Click to expand...
Click to collapse
You can use the stock RUU for your phone version, so you'll be 100% stock rom but with s-off and unlocked bootloader
smartiejoe said:
not too much hassle to return to complete stock if necessary.
Click to expand...
Click to collapse
Easy to do with S-OFF
So you can use the latest RUU for your phone which you can find here
this will make your phone 100% stock (except s-off and unlocked bootloader). This will wipe everything on your phone so be sure to backup your media and personal data before on your computer.
download the exe file (about 1.5Gb)
plug your phone to your computer ( I assume your htc drivers are already installed correctly, if yes, your device is listed as ''My HTC'' in windows device manager)
launch the ruu.exe and follow instructions.

alray said:
You can use the stock RUU for your phone version, so you'll be 100% stock rom but with s-off and unlocked bootloader
Easy to do with S-OFF
So you can use the latest RUU for your phone which you can find here
this will make your phone 100% stock (except s-off and unlocked bootloader). This will wipe everything on your phone so be sure to backup your media and personal data before on your computer.
download the exe file (about 1.5Gb)
plug your phone to your computer ( I assume your htc drivers are already installed correctly, if yes, your device is listed as ''My HTC'' in windows device manager)
launch the ruu.exe and follow instructions.
Click to expand...
Click to collapse
Hi there,
I downloaded the RUU and ran it and followed all instructions but it encounters an error every time. It doesn't give any information on what the error is, it just stays on the silver HTC logo and the software says it has failed. It doesn't get stuck in a bootloop though.
Thanks,
Joe

smartiejoe said:
Hi there,
I downloaded the RUU and ran it and followed all instructions but it encounters an error every time. It doesn't give any information on what the error is, it just stays on the silver HTC logo and the software says it has failed. It doesn't get stuck in a bootloop though.
Thanks,
Joe
Click to expand...
Click to collapse
MD5 check the ruu file and make sure it match, if not download it again.
MD5: 9ad4111ce86981e3dffcce6d9ee80551

alray said:
MD5 check the ruu file and make sure it match, if not download it again.
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Click to expand...
Click to collapse
Hi,
I redownloaded it and ran it and it has been stuck on "0/5 sending" for the last 20 minutes or so, the interface says the whole process should take 10 minutes, is this normal?

smartiejoe said:
Hi,
I redownloaded it and ran it and it has been stuck on "0/5 sending" for the last 20 minutes or so, the interface says the whole process should take 10 minutes, is this normal?
Click to expand...
Click to collapse
have you checked md5?
Maybe you could try another usb cable or another usb port

alray said:
have you checked md5?
Maybe you could try another usb cable or another usb port
Click to expand...
Click to collapse
I checked MD5 and that was all fine, I'm using a different port and now it sits on "updating (1/5) Checking Header..." for ages and I've not yet seen it move any further

smartiejoe said:
I checked MD5 and that was all fine, I'm using a different port and now it sits on "updating (1/5) Checking Header..." for ages and I've not yet seen it move any further
Click to expand...
Click to collapse
Try another usb cable. You could also try the 1.28.401.7 ruu

alray said:
Try another usb cable. You could also try the 1.28.401.7 ruu
Click to expand...
Click to collapse
I just read somewhere that hboot 1.44 might be needed, and I have 1.54. So I shall flash 1.44 and see if it works then!
EDIT: When trying to flash hboot 1.44 it won't even send the 501kb zip file, even through a brand new usb cable. Updating drivers now to see if that works

Related

[Q] One bricked when attempting a return to stock

Hello there everyone, sorry to add another 'bricked' thread to the first page but it seems the more I try to fix my phone on my own, the deeper the hole I'm digging becomes.
About a week ago I installed Cyanogenmod via their installer. It was nice and straightforward but I soon began to miss Sense 5.5 so I set out to return my phone to stock. This was a few days ago and since then I have learned about flashing, rooting, fastboot etc., but I am now stuck where I cannot make it past the Cyanogenmod logo and I have absolutely no idea where to start fixing things. I can't make any progress as I do not have USB debugging mode enabled (nor can I enable it now) and I have no backup other than the automatic backup to Dropbox.
Below is my getvar output. Phone is 'TAMPERED' and 'UNLOCKED'. Oh, the phone is not rooted and was bought in Hong Kong but I use o2 in England. Please let me know If there is any more information I need to include.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.708.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Oops
(bootloader) imei: nothing to see here
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 4300mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-14eb688c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Thanks for taking the time to read this, any pointers would be very much appreciated
I'm no expert, but maybe this can help.
Here's what I did with mine when I thought I bricked it. Keep in mind that I had a micro-USB to USB OTG cable. (costs less than $5)
Mine was bootloader unlocked, s-on but with hboot 1.55 or 1.54.
1. install TWRP recovery (openrecovery-twrp-2.6.3.3-m7.img) using fastboot.
2. Boot into TWRP recovery, then using OTG cable, mount a USB flash drive that has a installable zip image of the whole thing. I just used one from here:
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
I got the "Download stock odexed 4.19.401.8" since I wanted to return it to stock like so I can return it.
I flashed it with that, and it would reboot into stock-like Android. I still had a bootloader from GoogleExperience version, and I accidentally did S-on before fixing these so I was screwed.
Anyways, that's how I got mine back to working state. After that, I couldn't get S-off (hboot 1.54) no matter what even using Rumrunner. Trying to get S-off again, I had to reflash the kernel with some other custom kernel, and then was able to do rumrunner to get s-off again. From that point, everything was easy, and I was able to reinstall real AT&T stock android using their RUU exe file. After that it installs OTA updates too.
kelvov said:
Hello there everyone, sorry to add another 'bricked' thread to the first page but it seems the more I try to fix my phone on my own, the deeper the hole I'm digging becomes.
About a week ago I installed Cyanogenmod via their installer. It was nice and straightforward but I soon began to miss Sense 5.5 so I set out to return my phone to stock. This was a few days ago and since then I have learned about flashing, rooting, fastboot etc., but I am now stuck where I cannot make it past the Cyanogenmod logo and I have absolutely no idea where to start fixing things. I can't make any progress as I do not have USB debugging mode enabled (nor can I enable it now) and I have no backup other than the automatic backup to Dropbox.
Below is my getvar output. Phone is 'TAMPERED' and 'UNLOCKED'. Oh, the phone is not rooted and was bought in Hong Kong but I use o2 in England. Please let me know If there is any more information I need to include.
Thanks for taking the time to read this, any pointers would be very much appreciated
Click to expand...
Click to collapse
Do you have a nandroid backup of your phone? Remove IMEI and S/N from your last post!!
hp79 said:
I'm no expert, but maybe this can help.
Here's what I did with mine when I thought I bricked it. Keep in mind that I had a micro-USB to USB OTG cable. (costs less than $5)
Mine was bootloader unlocked, s-on but with hboot 1.55 or 1.54.
1. install TWRP recovery (openrecovery-twrp-2.6.3.3-m7.img) using fastboot.
2. Boot into TWRP recovery, then using OTG cable, mount a USB flash drive that has a installable zip image of the whole thing. I just used one from here:...
I got the "Download stock odexed 4.19.401.8" since I wanted to return it to stock like so I can return it.
I flashed it with that, and it would reboot into stock-like Android. I still had a bootloader from GoogleExperience version, and I accidentally did S-on before fixing these so I was screwed.
Anyways, that's how I got mine back to working state. After that, I couldn't get S-off (hboot 1.54) no matter what even using Rumrunner. Trying to get S-off again, I had to reflash the kernel with some other custom kernel, and then was able to do rumrunner to get s-off again. From that point, everything was easy, and I was able to reinstall real AT&T stock android using their RUU exe file. After that it installs OTA updates too.
Click to expand...
Click to collapse
Thanks for the info, will have to try it tomorrow after buying a cable
alray said:
Do you have a nandroid backup of your phone? Remove IMEI and S/N from your last post!!
Click to expand...
Click to collapse
Unfortunately no, I wrongly assumed a simple backup would have sufficed in the event anything went wrong. Never again. Oops, that for the heads up on that
You should be able to push ARHD 31.6 and be ok
sent from my mobile device

[Q] RUU stuck at "checking headers"

I have an HTC One M7 (European unlocked version). I'm trying to restore it to the stock software, but I don't care about the "locked/re-locked" status, so I didn't bother getting s-off. Right now I have the stock odexed ROM that I got from here and TWRP 2.6.3.3.
This is the RUU file I'm trying to use. (The "stock ROM" I have now is version 4.19.401.8 instead, and has support for OTA updates, but it says my phone is up to date even if it's not.)
I know that to get a RUU working on an HTC phone, you have to re-lock the bootloader. So I did. This is my fastboot info now:
Code:
C:\Windows\system32>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CENSORED
(bootloader) imei: CENSORED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4302mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.059s
At the top the screen says "tampered" and "relocked."
So, still being on fastboot and aware that all the data in the phone would be gone, I ran the RUU file on my windows pc. It started up and I went through the setup. It rebooted my phone to a black screen with a gray htc logo and started the process.
However, I've noticed it's been at 5% and saying "checking headers" for a bit too long now. I waited an hour and it was still stuck. I held down the power button on my phone until it rebooted. It still booted up and worked fine, nothing was deleted. Tried again, same thing. I'm sure I'm using the right RUU file, and the MD5 checks fine. I remember doing this on an htc one v, I was in the same exact situation and everything went through. Why doesn't it work with my m7?
Now my bootloader is locked and if I re-unlock it, it will delete all my stuff. I can still use the phone fine, but I want stock rom, recovery and everything, so I can also get the official sense 6 update. I could do s-off if I really have to, if that's what it takes to get the RUU working. My phone's still rooted, but I don't think the firewater or whatever utility to get s-off works with a locked bootloader. What I'd like to do is just get the RUU working, but it's not. Have I screwed up? Do I re-unlock the bootloader and have to resort to custom roms on this phone? Please help. If I didn't provide enough info, tell me.
XDA Dev said:
I have an HTC One M7 (European unlocked version). I'm trying to restore it to the stock software, but I don't care about the "locked/re-locked" status, so I didn't bother getting s-off. Right now I have the stock odexed ROM that I got from here and TWRP 2.6.3.3.
This is the RUU file I'm trying to use. (The "stock ROM" I have now is version 4.19.401.8 instead, and has support for OTA updates, but it says my phone is up to date even if it's not.)
I know that to get a RUU working on an HTC phone, you have to re-lock the bootloader. So I did. This is my fastboot info now:
Code:
C:\Windows\system32>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CENSORED
(bootloader) imei: CENSORED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4302mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.059s
At the top the screen says "tampered" and "relocked."
So, still being on fastboot and aware that all the data in the phone would be gone, I ran the RUU file on my windows pc. It started up and I went through the setup. It rebooted my phone to a black screen with a gray htc logo and started the process.
However, I've noticed it's been at 5% and saying "checking headers" for a bit too long now. I waited an hour and it was still stuck. I held down the power button on my phone until it rebooted. It still booted up and worked fine, nothing was deleted. Tried again, same thing. I'm sure I'm using the right RUU file, and the MD5 checks fine. I remember doing this on an htc one v, I was in the same exact situation and everything went through. Why doesn't it work with my m7?
Now my bootloader is locked and if I re-unlock it, it will delete all my stuff. I can still use the phone fine, but I want stock rom, recovery and everything, so I can also get the official sense 6 update. I could do s-off if I really have to, if that's what it takes to get the RUU working. My phone's still rooted, but I don't think the firewater or whatever utility to get s-off works with a locked bootloader. What I'd like to do is just get the RUU working, but it's not. Have I screwed up? Do I re-unlock the bootloader and have to resort to custom roms on this phone? Please help. If I didn't provide enough info, tell me.
Click to expand...
Click to collapse
Great information! Your post is a model of HOW a question should be posted!
Anyway, if 4.x.401.x RUU is NOT working, try another computer, if it is still not working, then yes, S-OFF, flash 1.44 HBOOT, and run the http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/ RUU. This will take you back a few months ago, but you will be able to OTA all the way upto Sense 6!
SaHiLzZ said:
Great information! Your post is a model of HOW a question should be posted!
Anyway, if 4.x.401.x RUU is NOT working, try another computer, if it is still not working, then yes, S-OFF, flash 1.44 HBOOT, and run the http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/ RUU. This will take you back a few months ago, but you will be able to OTA all the way upto Sense 6!
Click to expand...
Click to collapse
Haha, thanks, I guess nearly 3 years of lurking on these forums taught me something about posting.
I was using a Windows Vista SP2 PC to try this. I've just tried it on my Mac running Windows 7 SP1 with bootcamp, the RUU file (which still checks out with the correct MD5 hash) starts the installshield wizard normally, but as soon as I accept the terms and conditions, the program closes and nothing opens again. I checked on task manager, the process closes shortly after accepting the terms. I tried restarting and looking up for a solution but I couldn't find anything that worked.
Is Vista really the only reason it's stuck at checking headers? I know Vista is rather despised by a lot of people, but by 2014 it did get better. I'd rather use that machine because on my Mac running Windows 7 the RUU could not start up because I've made the Windows partition too small. (It has around 3gb free now whereas the vista machine has more than 150).
Sorry for the double post, but it's probably my last one on this thread.
Even if my boot loader was re-locked, I tried running the firewater program to get s-off, and it worked. (As a bonus it re-unlocked my boot loader without wiping the phone, but I re-locked it again to get the ruu working).
Then I tried downgrading to hboot 1.44, but for some reason it kept giving an error like "failed: remote 42 custom id check fail." I decided to try the sense 5.0 ruu anyway (on my vista PC), and it worked! The phone now says "relocked" but tampered is gone of course, and I have hboot 1.44, android 4.1 and htc sense 5.0, but still s-off.
The first update popped up (and it's not android 4.4 with sense 6, it's something in between) so I'm going to update until no more updates are available. Then I'm going to re-unlock the boot loader because I want to root my phone, and then set up all my stuff. When a new update comes out, I can just flash the original recovery, apply the update and then re-flash twrp to root again.
Thank you for the suggestion to install the older ruu. I'm still stumped on why the newer one didn't work (it would have caused much less hassle), but whatever. At least my phone is much cleaner now. It feels good to have it like this again, I'm not against custom roms but I like the stock software too.
I'm using my iPhone to write this, but trust me, my htc is in full working order now.
Until next problem I can't solve myself
Sent from my iPhone using Tapatalk
Thanks for updating back. Don't S-ON.
SaHiLzZ said:
Thanks for updating back. Don't S-ON.
Click to expand...
Click to collapse
Yeah, I'm not going to. I've updated to android 4.3 now and I'm still downloading updates--it updated hboot to 1.55 but I still have s-off, so I believe it stays s-off if I don't run the command to (I guess irreversibly) go back to s-on, which I don't even know. (I didn't do s-off before because I didn't care about the extra privileges and was afraid of bricking my phone, but now that I have it I don't mind so I'm keeping it).
Sent from my iPhone using Tapatalk

[Q] Bootloader says Tampered but I've never tampered it!

I got a message about the OTA update so downloaded it and went to install, on the reboot I got the bootloader appearing which says
****TAMPERED***
****LOCKED****
****Security Warning****
I have never bothered to root the phone or anything as its one I use for my business so didn't want to take any risks with it! HTC were absolutely useless when I asked them about this (no surprises there)
so how do i get the update to install on my phone?
the_r_sole said:
I got a message about the OTA update so downloaded it and went to install, on the reboot I got the bootloader appearing which says
****TAMPERED***
****LOCKED****
****Security Warning****
I have never bothered to root the phone or anything as its one I use for my business so didn't want to take any risks with it! HTC were absolutely useless when I asked them about this (no surprises there)
so how do i get the update to install on my phone?
Click to expand...
Click to collapse
can you post the output of ''fastboot getvar all'' except imei and serialno
i can try!
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
well, now it's getting really annoying, I guess the update tried to install and somehow fooled google play into thinking it had, that updated itself and now I get errors every minute to say google play services has stopped and then after about 4 the phone reboots - it's really handy having a premium device for work that I can't use
so decided i would try and follow the guide to set back to stock - first thing to do is to get s-off - tried the firewater thing but the phone won't stay on long enough to get through the instructions!!
What a piece of …
I am going to attempt to get a new handset from my network as this kind of rubbish shouldn't happen to a handset that i've never tried to alter!
Can you download the RUU for your phone, boot into bootloader then flash it?
Sent from my HTC One using Tapatalk
well, no!
I am now looking at the white screen "h&c quietly brilliant" and have been for some time - won't get past that screen now not sure what happened on one of the restarts to make that happen but assuming it's just going to get worse until it goes in the bin
can i flash the RUU with S-On?
I have so much hate for my phone right now, the one reason I have never touched the software on this one is because I need it for work, and it's the only one that's gone t*** up!
the_r_sole said:
can i flash the RUU with S-On?
I have so much hate for my phone right now, the one reason I have never touched the software on this one is because I need it for work, and it's the only one that's gone t*** up!
Click to expand...
Click to collapse
One of the main reasons I root and install custom recovery and s-off is to insure I have backups and the ability to flash any RUU. Their is no Nandroid with a stock phone.
So, can anyone help with this?
Phone can only get to bootloader and freezes at white screen if I try to start it...
the_r_sole said:
So, can anyone help with this?
Phone can only get to bootloader and freezes at white screen if I try to start it...
Click to expand...
Click to collapse
well, I got somewhere! went to htcdev to unlock the bootloader, once I did that it rebooted properly so apart from losing all my text messages and having to set up my emails it's all good!
have done some more reading and it seems like 1.56 hboot can't get s-off so I am in the ludicrous situation of not being able to get a completely stock phone to be a completely stock phone and get the OTA updates!!
the_r_sole said:
have done some more reading and it seems like 1.56 hboot can't get s-off so I am in the ludicrous situation of not being able to get a completely stock phone to be a completely stock phone and get the OTA updates!!
Click to expand...
Click to collapse
you can s-off using firewater for hboot 1.56, sometime it works, sometime it don't.
you can still have ota updates if you restore the missing files for ota and you flash back the stock recovery.
or some custom roms are always up-to-date and not much different from a stock rom look (i.e ARHD)
you can always send the phone to fonefunshop.com and have it s-off'ed via a java card. then you'll be able to do a full ruu
Yeah, tried firewater a few times and it gave me the error saying that it will never work!
Went for ARHD which works fine, so will just stick with it for a while anyway
Cherrs

[Q] Restoring 100% to stock, not working as it should...

Hi guys,
First of all, I did read all the topics conserning to RUU, S-On/S-Off, rumrunner, moonshine, firewater, revone, and so on but I can't seem to figure out how to properly do this.
Currently the HTC is running MIUI v5 4.5.16 JB4.2. But for warranty it has to go back to the store and I want to restore it to completly stock ROM etc. without any evidence I had a custom ROM running.
What I did was, follow the steps to unlock the bootloader, flash a custom recover (TWRP v2.6.3.0) and finally root it after MIUI was flashed.
The info you guys prolly need are as followed:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.26.3263.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.161.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: .................
(bootloader) imei: ................
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4322mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-09ff2ded
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
I tried to get S-Off but I keep getting strange errors on all of the given methods. This should work somehow I guess but how? Can somebody give me some kind of "roadmap" how to do it properly?
Currently fastboot shows:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.26.3263.05
OpenDSP-v32.120.274.0909
OS-4.19.161.11
eMMC-boot 2048MB
Mar 5 2014,15:58:33.0
Click to expand...
Click to collapse
At the moment I'm downloading "RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe". But I already noticed that if I turn S-On (fastboot oem lock) then the phone is stuck in fast boot mode...
Thanks!
I think S-off is danger may u brick ur phone, it's better to leave it
ahmed blue said:
I think S-off is danger may u brick ur phone, it's better to leave it
Click to expand...
Click to collapse
Yeah but what if I need it to go back to stock ROM?
Now it's running stock ROM but I still get "TAMPERED" and "UNLOCKED" in the bootloader. I once went into the stock recovery, and once rebooted it reset itself and everything was back factory install -again- ...?
This is the fastboot output right now after flashing Guru Reset M7 2.24.161.1.zip :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.161.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...................
(bootloader) imei: ....................
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4185mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-09ff2ded
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
The OTA update to 4.3 even fails once it reboots itself for installation. Something wrong or normal?
EDIT:
I've done "fastboot oem lock" and now it's showing (as expected) "RELOCKED".
BETA911 said:
Yeah but what if I need it to go back to stock ROM?
Now it's running stock ROM but I still get "TAMPERED" and "UNLOCKED" in the bootloader. I once went into the stock recovery, and once rebooted it reset itself and everything was back factory install -again- ...?
This is the fastboot output right now after flashing Guru Reset M7 2.24.161.1.zip :
The OTA update to 4.3 even fails once it reboots itself for installation. Something wrong or normal?
EDIT:
I've done "fastboot oem lock" and now it's showing (as expected) "RELOCKED".
Click to expand...
Click to collapse
Yup it will do, the only way to get rid of those flags tampered and unlocked / relocked is to go s-off, which strange messages are you getting whilst trying to s-off ?
I have a backup of the Vodafone Rom which you can restore through twrp, I'll send a link when I get home in a couple of hours, but it won't get rid of those flags, 401.RUU is the wrong RUU, you need 161.
---------- Post added at 05:43 PM ---------- Previous post was at 05:34 PM ----------
Ps there is no danger going s-off, as long as your flashing the correct software for your phone, the only danger is when you don't know what your doing and try to flash something wrong, it won't warn you, won't error and won't fail to flash, but at reboot it also won't come back on again.
Seanie280672 said:
Yup it will do, the only way to get rid of those flags tampered and unlocked / relocked is to go s-off, which strange messages are you getting whilst trying to s-off ?
I have a backup of the Vodafone Rom which you can restore through twrp, I'll send a link when I get home in a couple of hours, but it won't get rid of those flags, 401.RUU is the wrong RUU, you need 161.
---------- Post added at 05:43 PM ---------- Previous post was at 05:34 PM ----------
Ps there is no danger going s-off, as long as your flashing the correct software for your phone, the only danger is when you don't know what your doing and try to flash something wrong, it won't warn you, won't error and won't fail to flash, but at reboot it also won't come back on again.
Click to expand...
Click to collapse
Well... It said it had a OTA update (like before) to 4.3 and I downloaded it. Reboot, installed, reboot --> bootloop. Now it's "HTC - quietly brilliant", black screen for couple of seconds and reboot to start from HTC logo again...
It's really beginning to piss me of.
But anyway, thanks for the help! A TWRP backup of 161 would be nice, then I'll install that one. The servers at htc1guru are giving me headache, speed is only between 50 and 250 kb/sec! I tried to download more then once but they keep failing on me when they reach bigger sizes and at this speed it's really really annoying to start over again...
Does "M7 CWM Nandroid Backup CID VODAP102 1.29.161.7" work for me? I guess not because it's 1.29 and I already have a higher version so it will give me the touchscreen issues?
To be honest, if this phone finally makes it to the store for repair I hope they can't repair it and let me choose an other phone. I had multiple Android phones the past years (with sometimes more then 2-3 different roms per week) and never had any of these long stretching problems!
The problem your having with the ota sounds like whilst you were installing the guru reset file, you must select to wipe data and also install stock recovery, it will fail without stock recovery.
Well, I did select to install the stock recovery and stock radio in the aroma installer. So I'm out of clues why it's giving me so much problems...
EDIT:
I unlocked the bootloader again and flashed TWRP. I'll try with your Vodafone image once you have time to share it with me. Already big thanks for the help!
here's the backup, you will need to extract the zip file and put the folder named backup into SDCARD/TWRP/BACKUPS/"your device serial number/
https://drive.google.com/uc?export=download&confirm=5940&id=0B_nEcSZr5peRZnpMSHRPRjlzX2c
This will put you on Vodafone 4.4.2 with sense 5.5, however you cant send your phone back until you have got rid of those 2 flags in the bootloader, only way to do that is s-off.
Ignore the folder called recovery, its just TWRP recovery to flash.
After installing, download the stock recovery from the link below and flash it to get OTAs
http://d-h.st/Cyq
Hit the thanks button please.
Just finished installing it! It works so far, although it came up with a new 5.16.161.2 update right now (already has been downloaded...). What should I do?
Currently it's still in TAMPERED and UNLOCKED state with TWRP installed.
BETA911 said:
Just finished installing it! It works so far, although it came up with a new 5.16.161.2 update right now (already has been downloaded...). What should I do?
Currently it's still in TAMPERED and UNLOCKED state with TWRP installed.
Click to expand...
Click to collapse
there is no way out of this without s-off, I don't even understand why you are putting efforts on installing ota/guru reset/nandroid backup at this point.
you are on hboot 1.56 means you should try to s-off using firewater.
then you'll be able to remove the tampered flag and set the bootload back to "LOCKED" (not RE-LOCKED)
follow guide linked in my signature for going back to stock
try to s-off using firewater + arhd 31.6 rom
alray said:
there is no way out of this without s-off, I don't even understand why you are putting efforts on installing ota/guru reset/nandroid backup at this point.
you are on hboot 1.56 means you should try to s-off using firewater.
then you'll be able to remove the tampered flag and set the bootload back to "LOCKED" (not RE-LOCKED)
follow guide linked in my signature for going back to stock
try to s-off using firewater + arhd 31.6 rom
Click to expand...
Click to collapse
I know. I tried to get s-off but none of the given tools succeeded. They all complete their full cycle and eventually after the last reboot I go and check the state and it still says s-on... Then I did read I need a proper ROM so the tools can work (better). I tried to install ARHD like you mention, but after flashing it was stuck in a bootloop again. Clearing the cache and davlik didn't solve it.
At the moment I only need to know if it's safe to update to the new 5.16.161.2 update while it's unlocked... I got TWRP installed but I know I have to flash the stock recovery in order to make the update work. But I'm afraid I'm going to brick it again if I lock it again, as I don't know if it's needed to let the update complete without any errors.

[Fixed] Bricked Hboot 1.44 with RUU 1.31 (Explanation on how solved in OP)

[Fixed][Solution]
This should work for anyone who soft bricked there device but still has the 1.44 HBoot to allow them to still flash a recovery. I did not come up with any of this but was helped by nkk71 who showed me the way. I dealt with this problem for over 2 days now non-stop trying to fix it only missing 1 step that made all the difference.
This method is for a HTC One (M7) Sprint Variant:
-Be sure to use HTCDev to unlock your phone and flash a custom recovery. (I used TWRP)
-Be sure to have all the adb and fastboot exe files needed. If you bricked your phone you most likely already do but if not there are tons of links on the forums to help you get all the information you need from them.
-Check to make sure what RUU your phone is at by going into fastboot and using a cmd window type: fasboot getvar all. This will display your phones information. If you happen to be at 1.31 like my phone was you will need to do the next step, if not then find your recovery.
- Fix your version main to say 1.29.651.10 by editing the misc partition
Boot into recovery
In the recovery mount your device. I mounted all parts in TWRP.
Open a cmd window and doucle check that your device is connected by typing: adb devices
(If it shows a set up numbers and letters and then says recovery then that is your device.)
Now type: adb shell
type: echo "1.29.651.10" | dd of=/dev/block/mmcblk0p19 bs=1 seek=160
type: adb reboot bootloader
Once it loads back into the bootloader click on fastboot and check to see if your device is connected by typing: fastboot devices
If you see you device type: fastboot oem lock (This will relock your device)
- Now you are ready to run the RUU. (After it runs your phone is back to stock)
If any of this is confusing, there are links below that were used to get me through this. If you need to do this I wish you luck.
Original Post:
So basically I erased everything. Not sure how but phone Bricked. Luckily i have a 1.44Hboot and I simply just burned the recovery back.
Unforunately I've stopped messing with phones for about 2 years so it took me forever to get everything set back up properly. Now my biggest issue is I can't manage to get a ROM to boot anymore. The closest one is ViperOne 8, I've tried Android Revolution HD91.1 (which started all my troubles), NUSenSeven which is having issues for more people as well, and tried a very basic Stock M7 one.
Any information you give please act like I'm stupid. I can do adb and fastboot, but if you just say flash it, please dont expect me to know how. I've forgotten tons.
Anyways, currently my phone shows the:
*Tampered*
*Unlocked*
S-On
I have been trying to get it to S-off and then remove the Tampered but I can't get s-off with Revone.
Gives me Error = 1 and I'm just totally lost. But not I can't even seem to get a ROM to load and when it does I have no Service on this phone anymore and I have to remove the HTCsetupwizard.apk. Unfortunately sometimes this does not show up in system/app and under system might not show anything at all.
If that is standard to happen right after a fresh install without loading then that kind of makes sense. Also, I only wait about 10minutes on booting for the roms. Only Rom I wait longer on is the ViperOne 8 as it shows upgrading.
Please advise, I'm will to try anything. I'm having a huge headache with this and throwing the phone into a wall is becoming a reality.
toxicfumes22 said:
So basically I erased everything. Not sure how but phone Bricked. Luckily i have a 1.44Hboot and I simply just burned the recovery back.
Unforunately I've stopped messing with phones for about 2 years so it took me forever to get everything set back up properly. Now my biggest issue is I can't manage to get a ROM to boot anymore. The closest one is ViperOne 8, I've tried Android Revolution HD91.1 (which started all my troubles), NUSenSeven which is having issues for more people as well, and tried a very basic Stock M7 one.
Any information you give please act like I'm stupid. I can do adb and fastboot, but if you just say flash it, please dont expect me to know how. I've forgotten tons.
Anyways, currently my phone shows the:
*Tampered*
*Unlocked*
S-On
I have been trying to get it to S-off and then remove the Tampered but I can't get s-off with Revone.
Gives me Error = 1 and I'm just totally lost. But not I can't even seem to get a ROM to load and when it does I have no Service on this phone anymore and I have to remove the HTCsetupwizard.apk. Unfortunately sometimes this does not show up in system/app and under system might not show anything at all.
If that is standard to happen right after a fresh install without loading then that kind of makes sense. Also, I only wait about 10minutes on booting for the roms. Only Rom I wait longer on is the ViperOne 8 as it shows upgrading.
Please advise, I'm will to try anything. I'm having a huge headache with this and throwing the phone into a wall is becoming a reality.
Click to expand...
Click to collapse
1- please post a "fastboot getvar all" (excluding IMEI, MEID and s/n)
2- looks like you're on Sprint, which is different that the GSM version of the M7, and has a different partition table
3- you may need to use an RUU to get your partitions back to normal
4- revone wont work on such new ROMs, even if hboot is 1.44 the ROM still plays a factor
let's start with the "fastboot getvar all" output
nkk71 said:
1- please post a "fastboot getvar all" (excluding IMEI, MEID and s/n)
2- looks like you're on Sprint, which is different that the GSM version of the M7, and has a different partition table
3- you may need to use an RUU to get your partitions back to normal
4- revone wont work on such new ROMs, even if hboot is 1.44 the ROM still plays a factor
let's start with the "fastboot getvar all" output
Click to expand...
Click to collapse
1) C:\adb\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.059s
2) Yes on Sprint, but with no activation on this phone now.
3) RUU would be 1.31, I relocked phone and went to use the RUU but don't know how to flash it.
4) I figured that with Revone thats why I attempted the RUU but got stuck there. I'll have to refind the RUU again though as I downloaded about 40GB yesterday and my SSD doesn't have that much room anymore. Waiting for windows 10 which is far away.
BTW, Thank you for the response.
toxicfumes22 said:
BTW, Thank you for the response.
Click to expand...
Click to collapse
Sure, no problem.
toxicfumes22 said:
1) C:\adb\platform-tools>fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_wls
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
2) Yes on Sprint, but with no activation on this phone now.
Click to expand...
Click to collapse
okay, so it's a Sprint M7 with a messed up partition table, so yes, best course of action is probably RUUing
toxicfumes22 said:
3) RUU would be 1.31, I relocked phone and went to use the RUU but don't know how to flash it.
Click to expand...
Click to collapse
There is no 1.31.651.2 RUU (signed and encrypted) as far as I looked (which isnt very far, but I think it would have show up)
toxicfumes22 said:
4) I figured that with Revone thats why I attempted the RUU but got stuck there. I'll have to refind the RUU again though as I downloaded about 40GB yesterday and my SSD doesn't have that much room anymore. Waiting for windows 10 which is far away.
Click to expand...
Click to collapse
revone will need hboot 1.44 (dated pre June 2013) and a compatible ROM to work.
So course(s) of action:
A) fix your version main to say 1.29.651.10 by editing the misc partition; example here
then run full 1.29.651.10 RUU.EXE
then you can use revone
or
B) flash newer version RUU.EXE
use sunshine (paid app $25) to get S-OFF
note: you will likely need to update firmware first for the ruu to work properly
hope that points you in the right direction
nkk71 said:
So course(s) of action:
A) fix your version main to say 1.29.651.10 by editing the misc partition; example here
Click to expand...
Click to collapse
Nice trick, still learning a lot from you
alray said:
Nice trick, still learning a lot from you
Click to expand...
Click to collapse
it's an "old trick", i take no credit at all for it ... as long as hboot version is the same, fixing the version-main (using adb or even the "misctool" <- it's somewhere on xda, dont have a link handy atm) should work fine
extract:
Code:
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version... [I]<- this is where it would fail, without that fix[/I]
(bootloader) checking hboot version... [I]<- this is where it would fail if hboot is higher[/I]
(bootloader) start image[boot] unzipping & flushing...
nkk71 said:
Sure, no problem.
okay, so it's a Sprint M7 with a messed up partition table, so yes, best course of action is probably RUUing
There is no 1.31.651.2 RUU (signed and encrypted) as far as I looked (which isnt very far, but I think it would have show up)
revone will need hboot 1.44 (dated pre June 2013) and a compatible ROM to work.
So course(s) of action:
A) fix your version main to say 1.29.651.10 by editing the misc partition; example here
then run full 1.29.651.10 RUU.EXE
then you can use revone
or
B) flash newer version RUU.EXE
use sunshine (paid app $25) to get S-OFF
note: you will likely need to update firmware first for the ruu to work properly
hope that points you in the right direction
Click to expand...
Click to collapse
I'd like to do option A but unfortunately I do not know how to use adb in recovery. I only know how to use it when android is running. The rest I should be able to do.
toxicfumes22 said:
I'd like to do option A but unfortunately I do not know how to use adb in recovery. I only know how to use it when android is running. The rest I should be able to do.
Click to expand...
Click to collapse
you use adb shell same in recovery (actually better) as you use it in a booted & rooted rom, unfortunately, i can't do that right now, so either @alray will have to help you
or it'll have to wait till tomorrow.
New Getvar all after I guessed that mounting the phone would allow an adb connection
C:\adb\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.651.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4329mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
So do this mean that I am ready to run the .exe while in fastboot?
Of course after relocking the device. just want to confirm as I tried this earlier but missed the first step which was most likely crucial.
toxicfumes22 said:
New Getvar all after I guessed that mounting the phone would allow an adb connection
C:\adb\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.651.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4329mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
So do this mean that I am ready to run the .exe while in fastboot?
Of course after relocking the device. just want to confirm as I tried this earlier but missed the first step which was most likely crucial.
Click to expand...
Click to collapse
yes should work fine now, give it a try.
alray said:
yes should work fine now, give it a try.
Click to expand...
Click to collapse
nkk71 said:
you use adb shell same in recovery (actually better) as you use it in a booted & rooted rom, unfortunately, i can't do that right now, so either @alray will have to help you
or it'll have to wait till tomorrow.
Click to expand...
Click to collapse
I have a phone again. Thank you so much.
Imagine someone frustrated for over 2days spending 10+ hours a day readying, flashing and trying everything to get their phone to work with limited knowledge.
Now imagine that same person jumping up and down with joy. (That's me now)
Thank you so much for your help. Your links did the trick, they were what I couldn't find.
Now that I know how to do this, I'm going to try RevOne, flash a new Firmware and then flash one of the new roms I wanted. If any of this fails then I'm done with this stuff for some time, haha.
toxicfumes22 said:
I have a phone again. Thank you so much.
Imagine someone frustrated for over 2days spending 10+ hours a day readying, flashing and trying everything to get their phone to work with limited knowledge.
Now imagine that same person jumping up and down with joy. (That's me now)
Thank you so much for your help. Your links did the trick, they were what I couldn't find.
Now that I know how to do this, I'm going to try RevOne, flash a new Firmware and then flash one of the new roms I wanted. If any of this fails then I'm done with this stuff for some time, haha.
Click to expand...
Click to collapse
Glad everything worked out
And for once, thank you for updating the title and first post (you may wanna check that echo command though)
And many thanks to @alray
Sent from my SM-P905 using Tapatalk
nkk71 said:
Glad everything worked out
And for once, thank you for updating the title and first post (you may wanna check that echo command though)
And many thanks to @alray
Sent from my SM-P905 using Tapatalk
Click to expand...
Click to collapse
All thanks for you
My only contribution here was to say "give it a try" :laugh:
alray said:
All thanks for you
My only contribution here was to say "give it a try" [emoji23]
Click to expand...
Click to collapse
Sometimes, that is all what is needed
I think the OP agrees.
Sent from my SM-P905 using Tapatalk
nkk71 said:
Glad everything worked out
And for once, thank you for updating the title and first post (you may wanna check that echo command though)
And many thanks to @alray
Sent from my SM-P905 using Tapatalk
Click to expand...
Click to collapse
I copied and pasted, its exactly what I used. If it's wrong let me know and I'll fix though.
Another update though is I am now Unlocked with S-Off w/o Tampered. Basically what I wanted.
Now should be my last questions, but it's a good idea to update to the newest firmware correct?
Firmware will never be able to stop me from achieve what I just did to fix the phone correct?
nkk71 said:
Sometimes, that is all what is needed
I think the OP agrees.
Sent from my SM-P905 using Tapatalk
Click to expand...
Click to collapse
Yup, I was going to not do a thing until I had a response. I was just worried I'd somehow mess it up. Just one confirmation that it looked good was enough to give me confidence.

Categories

Resources