Disclaimer:Lets Stop Here And Say I DO NOT OWN THE DEVICE But A Friend Venomtester Has Tested This And Said It Worked So Here You Go
By flashing this rom you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, this tool has been tested but whatever happens on your device will not be held against the developer.
*NOTE*
If you Want Want To See A Recovery That not in Here Just Ask
Be Sure You Have A HTC One (M8)
It Shoud Work On All GSM Phones ONLY GSM NO CDMA (Sprint verizon ) OR YOU WILL BRICK
About:One day while on xda I saw a recovery switcher made by another xda user so I said to myself "hay I want that"
so After Messing With Stuff I Was Done With my Own Recovery Switcher But Enough taking go ahead and flash and have fun IF you like my development please follow my project from desktop, by going on the first page of this thread and pressing from the top black corner the button telling you "FOLLOW PROJECT”.
THANK YOU
Recoverys In Here:
TWRP 2.7.0.4
PhilZ Touch 6.43.6
ClockworkMod Touch v6.0.4.8
Stock GPE Recovery
Features:
[*]Switch Pre Built Recovery Made For Your Device On The Fly
[*]No More Flashing recovery's In Fastboot
Changelog:v1.0 - 4/14/14: <--- Lol
Initial Release
v2.0 - 6/3/14:
Added ClockworkMod Touch
AddedStock GPE Recovery
Downloads:
Recovery_Switcher_One_(M8)v2
MD5 a9dab3fb5df27880fa188d56a83e7461
Recovery_Switcher_One_(M8)v1
MD5 1d4079252ae079be3d6e8cf7bbb73146
Don't forget to hit the thanks button, I have worked very hard on this
Instructions:
Download the zip
Boot into recovery
Install It like you would with a Mod Or Rom
Then Set The Check Box At the end With Reboot In To System
Then Boot Back In to recovery and See your new recovery
Thanks To/Credits:
@amarullz - For Aroma Installer
@CNexus - For The Idea (Lol sorry )
@Phil3759- For Philz Recovery
@jmz - For Twrp Recovery
@mythi - For CWM Touch
@graffixnyc - For Stock GPE Recovery
Big Thank You To @Venomtester For Testing / For The Op Pictures
glencoco[/CENTER]
Reserved
Reserved
Great idea...
I had a problem a couple of weeks ago where I had unlocked my bootloader, flashed TWRP & SSU, (and then decided I was happy with the stock ROM for the time being) only to get a notification a few minutes after re-setting up my M8 about the OTA to 1.54.401.5.
Had to reflash stock recovery via Fastboot, do the OTA, relfash TWRP and then somehow I lost root so had to reflash SSU.
This would have been perfect....I'll keep it for future as I'm still with the stock ROM for now
Thanks! :good:
Nice was on twrp now on philz really nice mode work's great
Thanks for this
jaythenut said:
Nice was on twrp now on philz really nice mode work's great
Thanks for this
Click to expand...
Click to collapse
hi i take it you have to flash it every time to switch recovery.
freelockuk said:
hi i take it you have to flash it every time to switch recovery.
Click to expand...
Click to collapse
Yes you do
I like that disclaimer buddy If it goes bad , I did it. Is it too late to say my phone blew up? Just kidding. Great work!
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Venomtester said:
I like that disclaimer buddy If it goes bad , I did it. Is it too late to say my phone blew up? Just kidding. Great work!
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya not happy phone blew up and I don't remember see the disclaimer.
Darknites said:
Ya not happy phone blew up and I don't remember see the disclaimer.
Click to expand...
Click to collapse
My phone is fine lol. I was kidding flashalot.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Venomtester said:
My phone is fine lol. I was kidding flashalot.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Lol its a joke flashalot will get it.
Darknites said:
Ya not happy phone blew up and I don't remember see the disclaimer.
Click to expand...
Click to collapse
No one reads the disclaimer all the cool kids just download and flash[emoji41]
Sent from my D2lte CandyKat
ok, so im slow, please take it easy on me
So after you flash this do you essentially have 2 recoveries and then you can pick between the 2 when you load into recovery mode?
CyclingVinnie said:
ok, so im slow, please take it easy on me
So after you flash this do you essentially have 2 recoveries and then you can pick between the 2 when you load into recovery mode?
Click to expand...
Click to collapse
Lol its OK we all are this is just a tool that will flash a different recovery then the one you have
say if I flashed twrp and I had philz installed twrp would be installed and philz would not be installed because twrp was flashed
Sent from my D2lte CandyKat
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried it, it works good, certainly easier then flash via computer in fastboot, but there is only one recovery can be installed at a time, you have to re flash the app if you want to switch, unless I am missing something.
Can this be done like the dual recovery for the Xperia phones, volume down power goes into TWRP, volume up power goes into CMW.
Thanks
coolmingli said:
I tried it, it works good, certainly easier then flash via computer in fastboot, but there is only one recovery can be installed at a time, you have to re flash the app if you want to switch, unless I am missing something.
Can this be done like the dual recovery for the Xperia phones, volume down power goes into TWRP, volume up power goes into CMW.
Thanks
Click to expand...
Click to collapse
Yes one at a time
Well I have no knowledge on how that is done on xpera phone but as said before this is just to make flashing a different recovery on your phone a breeze
Sent from my D2lte CandyKat
Forgot I updated this yesterday
Check op for changelog
Sent from my One M8 using Tapatalk
Will this stay updated..
GBPackerFanForLife said:
Will this stay updated..
Click to expand...
Click to collapse
6 Days Late but no h8 but...
As seen in the newer version of twrp it didn't seem necessary to update(From the ability to flash imgs right from the recovery truly awesome) if you want to see one would need more the 3 people to say yes
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
-----------------------
Prerooted incl. ADB root
Deodex
UA String
AdFree Hosts (No More Ads)
Themed
Installation ( More detailed on http://stefan-developer.us/2011/08/broodcomb-gt-p7500-xwkg9-3gromcwm/ )
-----------------------
(If coming from XWKG9 STOCK, Skip to step 5.1)
1. Download Stock Rom P7500-XWKG9 EUR 3G Only http://www.multiupload.com/SGV6N78YY7 [password: samfirmware.com] (Source http://www.samfirmware.com/)
2. Download ODIN3 V1.85 http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576
3. Extract stock rom somewhere on your computer also Odin, run Odin and don't touch anything except PDA where you will select previously extracted stock file.
4. Put Tab in Download mode, connect tab to computer, power off, hold power off and volume - till you see two icons then press volume + and if it ask are you sure pres volume + one more time and you are in download mode then ( order of buttons is _power_ _volume -_ _volume+_ )
5. You should see yellow background on first box of odin and that is good your Tab is ready to flash, then click start on ODIN and wait till it reboot.
5.1 Boot in recovery ( Because stock doesn't have if you was following from step one do the root your Tab, as it is on this topic, so download this and put it on the sdcard, then put your Tab to Recovery mode power off, hold power off and volume - till you see two icons then press volume - ,then volume + and you should go to apply update zip file and you will select this file and when it is done you should reboot your device. )
6. Make a nandroid backup
7. Wipe data/factory reset
8. Flash BroodComb Alpha
9.Reboot and enjoy
Boot will take a while coz cache is cleared also factory mode is reseted so don't worry everything is fine.
--------------------------------
Screens
some screenshots would be nice!
Back in a flash ! =)
Nice stuff and a screenie idd would be nice
Sent from my GT-P7500 using Tapatalk
Seems to be fine men, much appreciate <3
Sent from my GT-P7500 using Tapatalk
Very nice work man. Keep on improving it, i'll be happy to test.
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Will make some screens when i get home sorry i was in hurry, regarding OC i think we will not see that coze source code for our kernel is not yet released...pity :/
Sent from my R800i using XDA Premium App
Never mind... sorted it out
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
will try this after download finish
tedbears said:
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
Click to expand...
Click to collapse
Cwm you should use Recovery mode = CWM , Download mode = Odin, np you are free to ask..we don't want to brick your tab...
Sent from my R800i using XDA Premium App
ca110475 said:
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Click to expand...
Click to collapse
Please could someone return a answer to his/her question?
Thank you very much.
Fianlly, first custom 3G rom. Thank you for this mate. Is it possible to have pure HC rom without crapwiz?
Thx
Sent from Galaxy Tab 10.1
mr_at_sgs said:
Please could someone return a answer to his/her question?
Thank you very much.
Click to expand...
Click to collapse
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
secretfile said:
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
Click to expand...
Click to collapse
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
I wonder from where on earth he got the source code, i doubt he disassembled it , but i am ready to try it out it simply can't harm also overcloock would be nice
wojmzy said:
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
Click to expand...
Click to collapse
Sure you can i was on it first time then flash it over with ODIN... so it is safe...
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
Hmm i tryed that kernel but somehow on my device 3g [GT-7500 not 10.1V] was not working.. maybe my tab is isolated problem?? can someone verify that his kernel is working?
Can you please post that sick wallpaper? And any others that you may have included? Haven't decided if I want to switch ROMs just yet and couldn't find the wallpapers in the zip...
Thanks!
Galaxy tab 2 10 owners, do not flash this, I have to make a custom one for it first (larger res and screen), I will post this as soon as I can!
Who's tired to using the vol/sleep buttons in recovery? I know I am, just about every device is getting some kind of touch recovery, why not the Gtabs?
Presenting touch recovery for the Galaxy Tab 2 series (I need a tester or 2 for the Gtab 2 10.1". PM me), based on TWRP, ported and custom themed by yours truly!
Special Thanks to:
- The Team Win Recovery Project <link>
- Xoomdev for creating CWM
- Chuck, my teammate, and sadly his grab 7 that gave its life for this recovery (RIP little guy hah!)
Procedure
Already Rooted with CWM recovery?
1. Download the cwm flash version of the recovery
2. Flash it using recovery, reboot and you are done.
New Gtab 2 user, not rooted or CWM flashed?
1. Download the img file instead.
2. User Heimdall, or Odin to write a new recovery.
3. Then flash my root zip
Downloads
1. TWRP Recovery CWM flash
2. TWRP Recovery IMG
3. Root zip via recovery
Enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YAY!!!!
Installing now, hopefully my tab doesn't get sacrificed... Good thing i bought the accidental damage warranty.
I'll report any problems, I need to flash the new tab2lite, so it's a perfect test.
Do you know how it handles backups? cwm backs up the full tab including internalSD. That resulted in backups bigger than i can fit on the xtra 2gb sd i had
UPDATE: i have installed and it's working great so far.
Sweet! Downloading now, I will install it shortly and report back!
It's fantastic, thanks man.
does this work on the galaxy tab 2 10.1?
So has anybody tested this on the samsung galaxy tab 2 10.1 us wifi? 5113
I will when I get home.
Sent from my Galaxy Nexus using Tapatalk 2
Thank you so much! While I think CWM is the gold standard in recovery I just love TWRP's touch recovery.
Just flashed it. Works great. I love how I can now see/flash from the internal storage. CWM wouldn't let me do that.
I flashed it and it works great, it takes some time to get used to but once it becomes familiar.... CWM who?
I tried every single major option, and no problems to report back.
Sincerely, thank you for this release, it is always good to learn a new way to do things.
Sent from my GT-P3113 using Tapatalk 2
Factory reset wipes things twice. Give it a try.
Doing a system restore now of a backup I made before trying out that new Tab2Lite ROM. Can't get back to AOKP fast enough!
System backup / restore worked fine.
How does one take a screenshot in recovery?
Don't think its possible I photoshopped the op graphic lol but it's a good Photoshop hah.
Thanks for the kind words.. its my first recovery (and theme for that matter). Anyone know a good themer? I think the ice blue I chose looks stunning on smoled screens!
Sent from my HTC One X using xda premium
nycbjr said:
Don't think its possible I photoshopped the op graphic lol but it's a good Photoshop hah.
Thanks for the kind words.. its my first recovery (and theme for that matter). Anyone know a good themer? I think the ice blue I chose looks stunning on smoled screens!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
this http://forum.xda-developers.com/showthread.php?t=1401000 theme is so awesome would be great if you could port it
--------------------------------------------------------
flashed the recovery on my gtab 2 10.1" but the touch does not work yet
I can confirm these flashing anything from 7" breaks touch on the 10".
Sent from my Galaxy Nexus using Tapatalk 2
Super M***** F****** slick. Good job. I give this two thumbs up on the tab 2 7"
Just a quick question will it work on p3100 tab 2
Sent from my GT-P3100 using Tapatalk 2
tapan15in said:
Just a quick question will it work on p3100 tab 2
Sent from my GT-P3100 using Tapatalk 2
Click to expand...
Click to collapse
It should work fine from what I've read.
Thanx scottx . One more help i need that its writted to flash the .img file with oding. Can you tell me how do i do that?
The img. file needs to be tar balled/zipped to use Odin. I don't know if any scripts need to be added to the file (don't think it does).
Sent from my GT-P3113 using XDA Premium HD app
How would one go about flashing this with Heimdall? I think I am doing it correctly, by going to the command prompt and typing in "heimdall flash --recovery," but it will not flash. Is there a different way to flash this?
cessnao3 said:
How would one go about flashing this with Heimdall? I think I am doing it correctly, by going to the command prompt and typing in "heimdall flash --recovery," but it will not flash. Is there a different way to flash this?
Click to expand...
Click to collapse
Make sure you download the heimdall suite. Follow the readme to install the correct drivers.
Use heimdall-frontend instead of the command prompt. Click on the flash tab, and use the pit file provided in the root thread. Once that's done select the correct partition and the file you want to flash then flash it.
Hm. I installed this, made a backup, flashed a few things perfectly, then went to try a new rom. So I did another backup and wiped /system, /cache, and did a factory data reset. Flashed the rom, didn't really like it, wiped the same things, and tried to restore my old backup.
/system restored correctly, I can tell because I still have Apex Launcher, which I previously converted to a system app using TiB. However, none of my apps came back. My wallpaper reverted to the drop of water, and I'm getting super bad force closes on Apex. Because of this, I'm thinking /data did not restore properly. I downloaded TiB from the market and tried restoring my apps using the nightly backups I had scheduled. No backups were found. My external sd card is fine, some things I had downloaded on it are still there.
Last thing, I flashed CWM using the touch recovery, booted into it, and tried a previous backup made with CWM, same problems...
Any ideas on what the problem is?
EDIT: while restoring, I get an error restoring /data
First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.
I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...
Anyways onto the goods.....
REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.
Note: This is based on the most current version of JellyBean for the NS4G (version 7)
Download v7 : Extended Power Menu v7 (Flash in CWM/TWRP)
Previous Versions:
Download v6a : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required
w00t!
Sweet! I was hoping something like this would be released soon, thanks!
Wow flashing it right now! Thanks! :good:
Phone just loops
Paul627g said:
First I have to give credit where credit is due for the original work.. I just ported it into the NS4G version.
I have to thank djmcnz for providing an awesome guide on how to do this mod and sharing it with everyone. That is what development is all about... Sharing...
Anyways onto the goods.....
REBOOT, REBOOT TO RECOVERY & BOOTLOADER EXTENDED POWER MENU FOR JELLYBEAN/NS4G
Aside from the obvious Reboot & Reboot to Recovery, you LONG PRESS on Recovery and it will boot into your bootloader.
Note: This is based on the most current version of JellyBean for the NS4G (version 6a)
Download : Reboot-Recovery-Bootloader-JellyBean-Mod (Flash in CWM/TWRP) Wiping not required
Click to expand...
Click to collapse
Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
kangta05 said:
Downloaded and flashed over the correct rom. After Boot and unlocking phone it will loop back to the boot animation after about 10 seconds
Click to expand...
Click to collapse
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Retry
Paul627g said:
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Click to expand...
Click to collapse
LOL i was stupid and didnt back up the rom but it wasnt much on there. But I forgot to say thank you in the first place. I'm about to backup the rom and re-try, will report back later
Thank you very much for all your work.Looks awesome.
Works Great
Paul627g said:
Hello,
Sounds like you could have had a bad flash or the possibility you weren't running version 6a.
Hopefully you made a nandroid backup before you flashed and you can restore that and try flashing the mod again.
This is the first reported fail after about 200 downloads of this modification.
Good luck, report back.
Paul
Click to expand...
Click to collapse
Reported back , reflashed the rom and then redownloaded and flashed mod, it works great. Thank you for your great work
Any version for the Ns3g?
Sent from my Full Android on Crespo using xda app-developers app
it's a wish. If you could add screenshot( I use this alot) and torch(convenient). It would be incredible. Anyone else?
n2d551 said:
it's a wish. If you could add screenshot( I use this alot) and torch(convenient). It would be incredible. Anyone else?
Click to expand...
Click to collapse
Screenshot can still be easily achieved just using the standard Power & Volume Down option. I know many devs throw in that screenshot mod to the reboot menu but to be it seems a little pointless. I will look into seeing what I can do, no promises..
Torch.. That I think is a ways off still.
I can't flash it.. it saying its for nexus 4g.
Sent from my Crespo using Jelly Bean
sidnoit22 said:
I can't flash it.. it saying its for nexus 4g.
Sent from my Crespo using Jelly Bean
Click to expand...
Click to collapse
Similarly, can't flash it
---------- Post added at 11:42 AM ---------- Previous post was at 11:18 AM ----------
vadbess said:
Similarly, can't flash it
Click to expand...
Click to collapse
HAAA i cracked it, and install to crecpo
I opened file updater-script (in zip) and find ro.product.device - changed parameter from "crespo4g" to "crespo"
Does this work for gsm version?
danshuynh said:
Does this work for gsm version?
Click to expand...
Click to collapse
read post 14
I can confirm this works for nexus s! But after rebooting the haptic feedback for the touch buttons are really weak!
But what's weird is that I keep having to reinstall the xda app after every reboot, is the mod the cause of this?
danshuynh said:
But what's weird is that I keep having to reinstall the xda app after every reboot, is the mod the cause of this?
Click to expand...
Click to collapse
I don't see why this mod would have anything to do with causing the XDA app to not stick.
danshuynh said:
I can confirm this works for nexus s! But after rebooting the haptic feedback for the touch buttons are really weak!
Click to expand...
Click to collapse
Yep should work on the Nexus S after redoing the updater script. Haptic feedback was not affected or changed for this so it really should not be affecting it. In no way was files for haptic feedback even touched.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery
Since 29.03.2014 please use official TWRP recovery [RECOVERY/M8_UL_CA] TWRP 2.7.0.2 Touch Recovery
Version 0.6
- Minor fixes
Issues:
- No external SD card support yet
Installation:
Unlock bootloader at http://www.htcdev.com/bootloader
Make sure fastboot is unchecked in power options and turn phone completely off
Boot into HBOOT then Fastboot
Rename the downloaded file to "recovery.img"
From fastboot. Use command "fastboot erase cache"
From fastboot. Use command "fastboot flash recovery recovery.img"
Rooting Tools
Download
MD5: A5E5D0BBEA22F1BD41E4E1897DF7078F
How to flash:
- from inside recovery
All credits goes to TWRP Team, I just ported this recovery from the M7 device.
XDA:DevDB Information
[Recovery & Rooting] TWRP Touch Recovery 2.6.3.3 v.0.6 [M7_PORT], a Tool/Utility for the HTC One (M8)
Contributors
mike1986.
Version Information
Status: Stable
Created 2014-03-25
Last Updated 2014-03-29
"Unlock bootloader at http://www.htcdev.com/bootloader"
HTC One m8 is not on the list...
BTW
is it possible to root the phone without Unlock the bootloader ?
nadav99 said:
"Unlock bootloader at http://www.htcdev.com/bootloader"
HTC One m8 is not on the list...
BTW
is it possible to root the phone without Unlock the bootloader ?
Click to expand...
Click to collapse
Select all other supported models
@nadav Generally speaking most HTC phones fall into the 'phone not listed category'
Root without htcdev unlock? I think not.
@mike you didn't waste any time
----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
InsertCoin over ElementalX
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Maedhros said:
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Click to expand...
Click to collapse
No clue yet, too many things yet to discover!
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Scott you already get yours?
Sent from my HTC6600LVW using xda app-developers app
htc bezel does not appear to respond to touch.
Will this work on US carrier variants?
scrosler said:
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Click to expand...
Click to collapse
Added, thanks for the warning!
WoW so soon!!
Thanks Mike!
Another reason to jump in the M8 train asap :good:
Welcome Mike
Sent from a mobile Gadget...
Electronic Punk said:
htc bezel does not appear to respond to touch.
Click to expand...
Click to collapse
That is quite unfortunate... thanks for the update. Looks like we are stuck with on screen buttons.
Great, hopefully gonna be some good stuff going on for this, picking mine up tomorrow morning (would have had today if I was in London)
scrosler said:
Mike, put in post that this will not work for Verizon based phones. You will get MID not allowed.
Make it easier than the thread filling up.
Click to expand...
Click to collapse
so i take it the at&t version is out to.
Will it be possible to root it without overwriting the existing recovery? When I get mine, all I will want is root access on the stock build after I've run the HTC unlock. Otherwise you run into problems getting OTA updates as released.
I had a similar issue with my HTC One X, but thankfully was able to get the original recovery to push back onto it after installing the SuperSU app with the custom recovery. Would rather not have to wait until there are updates out there before I can do the same thing with the M8!
clarkg said:
Will it be possible to root it without overwriting the existing recovery? When I get mine, all I will want is root access on the stock build after I've run the HTC unlock. Otherwise you run into problems getting OTA updates as released.
I had a similar issue with my HTC One X, but thankfully was able to get the original recovery to push back onto it after installing the SuperSU app with the custom recovery. Would rather not have to wait until there are updates out there before I can do the same thing with the M8!
Click to expand...
Click to collapse
No, you can't flash the root zip in stock recovery afaik
Maedhros said:
Hey Mike, any hint as to if the logo bezel is touch sensitive?
Will we be able to use it like the capacitive buttons on the M7?
Click to expand...
Click to collapse
As i said in other posts, I don't think that the bezel is touch sensitive... It would be a complete nonsense (but great at the same time) since the buttons are on the display itself
fix-this! said:
so i take it the at&t version is out to.
Click to expand...
Click to collapse
It should work fine with the at&t variant.
Sent from my HTC One using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sun_dream said:
Click to expand...
Click to collapse
@jmz @new to hacking
Why did I get tagged
Sent from my GT-P3110 using Tapatalk
Because we need you!!!
Many moons ago you had mentioned to be patient and that something big was just around the corner!
You have created some awesome work for this community!!!
If there is still life for this phone you will be the God of Godz to bring it to us. I hear the Chinese market has a demand for this phone??
Bring us your Power all mighty one!!!
the force is strong with you!
Yes yes yes!!
The HTC first lives again!
@jmz
Maybe because you're the only developer we got lol
sun_dream said:
@jmz @new to hacking
Click to expand...
Click to collapse
where is the link? i can t wait to try this new rom
I intend to release htc first sense5, I spent two hours to make it boot. (May 2 receive phone) Test three days to confirm its stability
dsigman said:
Many moons ago you had mentioned to be patient and that something big was just around the corner!
You have created some awesome work for this community!!!
If there is still life for this phone you will be the God of Godz to bring it to us. I hear the Chinese market has a demand for this phone??
Bring us your Power all mighty one!!!
the force is strong with you!
Click to expand...
Click to collapse
sun_dream said:
I intend to release htc first sense5, I spent two hours to make it boot. (May 2 receive phone) Test three days to confirm its stability
Click to expand...
Click to collapse
It's not booting for me I'm getting bootloop again n again plz help
Sent via HTC sense
works fine
new to hacking said:
It's not booting for me I'm getting bootloop again n again plz help
Sent via HTC sense
Click to expand...
Click to collapse
works perfect, format system! wipe everything and install jmz kernel...
Serupo said:
works perfect, format system! wipe everything and install jmz kernel...
Click to expand...
Click to collapse
sorry got it to boot now by deleting hcheck in /system/bin
Only bug i found so far is when beats is turned on n headphones plugged in music player wont play songs... turn beats off and play songs then turn on beats and it works... so some kind of glitches in this.... rest all works good....
Been waiting for sense 5 forever q.q then this comes out right after I sell my htc first lol.
What is the password for the website on the other forum about this ROM?
procitysam said:
What is the password for the website on the other forum about this ROM?
Click to expand...
Click to collapse
for download : nugi
Yeah I found that out through trial and error lol. To install the ROM though, do you need S-OFF or can it stay S-ON? If it needs S-OFF, can you point me to a forum about getting S-OFF?
Sent from my HTC first using XDA Premium 4 mobile app
Oh, and can someone please post a different download link of the ROM? The Chinese server is unbearably slow, so can someone put it up on an American server?
Got it downloaded and installed, its amazing. Only problem is that I got a bootloop when I first loaded it, but that was fixed by clearing the cache, dalvik cache, and something else. Thanks!
For those of you that are going to use this ROM, if you install with S-ON, and then later decide that you want to S-OFF (like me), then you will need to reflash the ROM after you achieve S-OFF, otherwise the ROM freezes at the "Sense 5" startup screen and then begins a bootloop up to that point.
procitysam said:
For those of you that are going to use this ROM, if you install with S-ON, and then later decide that you want to S-OFF (like me), then you will need to reflash the ROM after you achieve S-OFF, otherwise the ROM freezes at the "Sense 5" startup screen and then begins a bootloop up to that point.
Click to expand...
Click to collapse
I apologize if the answer's obvious, but how exactly do you achieve S-Off?
I used the rumrunner s-off tool, but I got stuck in the bootloop,so I had to stop it, but I still got s-off.
Sent from my HTC first using XDA Premium 4 mobile app
procitysam said:
I used the rumrunner s-off tool, but I got stuck in the bootloop,so I had to stop it, but I still got s-off.
Sent from my HTC first using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm in the same boat as you were in; mine's stuck in a bootloop; I don't know if I got s-off though. How did you manage to get yours to stop bootlooping?