Related
i have a Kindle Fire HD 7" with the system version of 7.2.1 and i wanted to ether put ICS or even Jelly bean on it so that i could have that Android Interface instead of the Amazon book self thing which im not very fond of and also have the Play Store. I spent all of yesterday, not exaggerating, all of yesterday trying to root my device. So i watched all the videos on you tube and read a ton of threads about it here at XDA and i just dont know what im doing wrong.
So first i download the Kindle Fire Utility (KFU) and installed the drivers(in device manager it showed my kindle fire and under it Android Composite ADB Interface), then plugging in my device i ran the "run" batch file. and the red command prompt pops up and it brings up the menu and at the bottom it says "ADB Status: Online, Boot Status Unknown" so i tried changing the boot mode to normal or fast boot,just changing it at all would have been nice but it always just stays as unknown. i tried hitting 1 to change to different boot mode but it would just reboot with no changes. then i tried entering 2 "installing permanant root with superuser" and twards the bottom of the screen its says rebooting device into fast boot mode, installing FFF, waiting for device. and it reboots and thats it, it doesnt go anywhere from there. so then i went to "6" extras and then "1" install google app / Go launcher which actually did work i have the Play store and Go Launcher (it says installed but its no where to be found on the device) and i also tried all the other options on the main menu, install TWRP, CLOCKWORKMOD and FFF and they all say missing directory and my kindle reboots and it says waiting for device and thats it nothing happens
SO i gave up with that method
so then i tried using the SDK -> ADB-> platform tool command prompt method and typed everything perfectly just like the threads and videos said to and still its like i got no where. i typed everything in just as shown and it seemed to be working but at the end it didnt work ether. i wish i had more specifics of what i typed in and what it said back in the command prompt but i did this yesterday so its gone now. i Dont know what im doing wrong and its very frustrating
(keep in mind im a noob and simple terms would be appreciated)
Zponds360 said:
i have a Kindle Fire HD 7" with the system version of 7.2.1 and i wanted to ether put ICS or even Jelly bean on it so that i could have that Android Interface instead of the Amazon book self thing which im not very fond of and also have the Play Store. I spent all of yesterday, not exaggerating, all of yesterday trying to root my device. So i watched all the videos on you tube and read a ton of threads about it here at XDA and i just dont know what im doing wrong.
So first i download the Kindle Fire Utility (KFU) and installed the drivers(in device manager it showed my kindle fire and under it Android Composite ADB Interface), then plugging in my device i ran the "run" batch file. and the red command prompt pops up and it brings up the menu and at the bottom it says "ADB Status: Online, Boot Status Unknown" so i tried changing the boot mode to normal or fast boot,just changing it at all would have been nice but it always just stays as unknown. i tried hitting 1 to change to different boot mode but it would just reboot with no changes. then i tried entering 2 "installing permanant root with superuser" and twards the bottom of the screen its says rebooting device into fast boot mode, installing FFF, waiting for device. and it reboots and thats it, it doesnt go anywhere from there. so then i went to "6" extras and then "1" install google app / Go launcher which actually did work i have the Play store and Go Launcher (it says installed but its no where to be found on the device) and i also tried all the other options on the main menu, install TWRP, CLOCKWORKMOD and FFF and they all say missing directory and my kindle reboots and it says waiting for device and thats it nothing happens
SO i gave up with that method
so then i tried using the SDK -> ADB-> platform tool command prompt method and typed everything perfectly just like the threads and videos said to and still its like i got no where. i typed everything in just as shown and it seemed to be working but at the end it didnt work ether. i wish i had more specifics of what i typed in and what it said back in the command prompt but i did this yesterday so its gone now. i Dont know what im doing wrong and its very frustrating
(keep in mind im a noob and simple terms would be appreciated)
Click to expand...
Click to collapse
WARNING!!
Firstly your Using a Kindle Fire HD. That is different to the Kindle fire. Even with root I dont think your gonna be running Jelly Bean just yet. You will probably brick the device if you use a standard Kindle Fire ROM!!!!!!!!!!!!!!!!!!!!!
Ok first download and Install the Android SDK. Put it where its easy to find. I use c:\ . Once thats done open SDK manager and tick next to Android SDK Platform-tools and click the box for Install packages.
Once thats done See this page: http://www.jayceooi.com/2011/12/13/how-to-install-kindle-fire-adb-usb-driver/
This gives the most stable ADB I have found.
OK next see this thread. This is automated root. http://forum.xda-developers.com/showthread.php?t=1893838.
If that still doesnt work (It didnt for me and others). Watch this Video. http://youtu.be/CYDBoTtdvcE This is the manual method. For a bigger look at the code see this page: http://www.redmondpie.com/how-to-root-amazon-kindle-fire-hd-7-8.9-on-android-4.0.4-ics/
On this page the open quote looks like a tilde EDIT thats actually a grave accent...I always called it the tilde key. Its not just use the KB apostrophe ( ' ) wherever you see a quote!
Hope this helps and I hope I dont get into trouble for posting external Links. Just trying to help!
Hey
I spent all night reading . . . . well pretty much every page on this forum. I am stuck - I am sure that if I had a normal Kindle Fire it would be rooted by now. I found the tutorial really easy to follow.
This demo unit automatically fires up in demo mode every time. A few notes that may help before I get into what I done. When using the swipe down menu, I only have a couple of options and cant get the the security settings (Im sure at this moment that ADB connectivity is disabled). I am unable to check which software this unit is running. If I try to get into the more option nothing happens, if you try to turn of parental controls the unit stated "this feature isnt availble in demostration mode". When connected in via USB - unit states its connected as media device, is listed as kindle under portable devices in device managers, and in my computer shows as a portable media player, with no contents if clicked on. If you check in the properties your can see a firmware version and a serial number but thats it.
This model has a Demo screen saver which kicks in if the unit is left idle for a few minutes, when it does is disconnects from th system then reconnects and is recognised again. If trying all this and ensuring the screensaver doesnt start still have no effect.
following this thread - http://forum.xda-developers.com/showthread.php?t=2069117
I have completed the windows 7 bug fix as here - http://forum.xda-developers.com/showthread.php?p=36373627
and attempting to install the kindle fire abd drivers or the USB_drivers the PC always states that I am currently using the correct drivers and the kindle is listed as "kindle" under portable devices.
I have also tried with the SDK package with the notes here - https://developer.amazon.com/sdk/fire/connect-adb.html
I have completed the actions in this videos also - http://www.youtube.com/watch?v=Khrxo0-NieM&feature=youtu.be
I have uninstalled the devices from my system numerours times but not matter which driver I try to install / force an update with. My system states that I am using the most upto date driver (MTP USB Device). I can uninstall the device from the system but I cant find any option to delete the drivers it auto assigns (wpdMTPdr.dll, winusb.sys, wudfrd.sys, wpdmtp.dll, wpdwtpus.dll). I would delted them manually but thought I would post here first - incase firther problems could arise.
Can anyone help with this issue, someone in this thread - http://forum.xda-developers.com/showthread.php?t=1828335&page=2
said they managed to do it, but didnt supply any info. I believe I have a driver and/or ADB connectivty issue.
At the moment I would just like to revert this Demo to a normal rooted kindle fire with the google play mod. If this isnt possible I would still like to root the device and just put an OS on there (jellybean seems to be the one of choice).
Thanks for reading this - and I look forward to the replies.
PS - The simple nood guide is by far the most informative and easy to follow guide that I have come accross. Had no problemn following the steps etc - like i said at the begging if this wasnt a demo model I am sure it would have been rooted by now. BIG BIG props to you guys especailly after seeing the lenght you go to helping people who didnt understand the guide! keep up the awesome work
So you have adb installed correctly and you're able to connect to the device USB and read it in your device manager.... correct?
Check under device manager for Kindle Fire. Click and check if it says android adb interface.
Sent from my KFHD7 using xda premium
Yes I believe that the ADB drivers are installed on my system. I tried the ones from the "kindle fire abd drivers", "USB_drivers" and the SDK package when following the Amazon guide. But when I connect my kindle to the PC it Auto installs and picks a driver which I found is labeled an MTP driver. The kindle is only list as "kindle" (in lower case) under portable devices in the device manager.
I have tried to update the driver and point the device manager to look at the Kindle fire ADB drivers, USB_drivers or point it to the drivers in the SDK folders.
I have also tried uninstalling the device each time, installing each drivers and reconnecting the device (i have also just uninstalled the device, left it connected and tried to install the drivers that way but no difference) - however it still installs the MTP driver which is automattically assigned. If the devices is connected with each driver and attempting the "ADB Devices" list in CMD prompt the list of devices is empty.
I am unable to access the security options in the kindle as it is a demo unit, if you touch more nothin happenes.
SO in short yes the drivers are on my system but I am unable to force the kindle to use them. I think this is probably to do with the fact that I cant access the security menu (I think ADB is disabled).
The only thing I can think of at the moment is to get a normal Kindle Fire, connect it and install the correct drivers- Unfortunatly I do not have access to another Kindle Fire to attempt this.
Just now The kindle fire stopped responding when booting up, with a pop up stating Demo mode has stopped responding - with options to wait or close demo mode. I choose close demo mode, but after struggling to boot it fired up in demo mode again.
Anyone know how to force a crash on a kindle fire - this may open access to the security menu.
Hello again - Just an update in case any of this is useful
if I follow this guide http://forum.xda-developers.com/showthread.php?t=1923010
with this page which is linked there www.jayceooi.com/2011/12/13/how-to-install-kindle-fire-adb-usb-driver/
The unit still installs as an MTP device. The best luck I have had was running the Install_drivers.bat file from the KFU utility which gives me an unsigned driver pop-up warning. when completed the system says it installes the google, INC, (winUSB)androidUSBdeviceclass (12/06/2010 4.0.0000.00000). However in device manager its still listed under portable devices as a kindle using the MTP driver. If I attempt to update and point the unit to the SDK altered files (using above guide) or the KFU drivers, it is still the same.
I am ready to pull my hair out LOL. But I am still pretty sure that the problem lies with not being able to access the security menu on the kindle.
Hey all another update with a bit of progress but I am stuck
I followed this guide - http://forum.xda-developers.com/showthread.php?t=1830108
and managed to get the Kindle recognised as a Android device after I had installed the google USB drivers
I then updated the drivers in the same way (The only driver it would accept was the one from the Qmenu folders).
Now the device is recognised as a kindle fire - when the window is expanded it states its a Android ADB interface.
I tried the advice in this thread http://forum.xda-developers.com/showthread.php?t=1927710 Bujt I cannot get the device to be recognised as an android ADB composit device.
(still shows as offline or does not appear under the ADB devices command, even though shown in device manager)
When updating the drivers as described in the guide, when I pick let me pick from list of device drivers I do have a "%compositADBinterface%, but no matter what I try once installed the device still reads as a kindle fire => Android ADB Interface. If I attempt the process again the "%compositADBinterface%" is still there.
Any ideas people?
I'm curious as to how you ended up with a demo version.
Open cmd... navigate to sdk\platform-tools\
type adb devices
Does it list a serial number?
Under Device Manager in windows, you should see it listed as Kindle Fire. When you expand that, it should show "Android ADB Interface"
If you see that then adb is installed. You may not be able to do anything without a factory cable. These guys on here should be able help you install a non-demo version on to your device.
Good luck!
Sent from my KFHD7 using xda premium
Hello again - thanks for the reply.
My friend worked in one of the stores that was recently a victim of the recession. I asked him how much they were selling the ex-demo stuff, the same evening he dropped by and handed it to me - He says his manager said he could take it .
Yes in Device Manager now the device is seen as a Kindle Fire and when expanded it states its an Android ADB Interface. I am a noob but from what Ive read so far this means the driver isnt correctly installed. As it should read "android ADB composit device"
Using the ADB devices command , it is blank under the list of devices.
Not sure if this helps, but if I right click the kindle in my computer and look at the properties, I can view the serial number there.
Looking into the factory cable options now
Again thanks for the help
stirky said:
Hey
I spent all night reading . . . . well pretty much every page on this forum. I am stuck - I am sure that if I had a normal Kindle Fire it would be rooted by now. I found the tutorial really easy to follow.
This demo unit automatically fires up in demo mode every time. A few notes that may help before I get into what I done. When using the swipe down menu, I only have a couple of options and cant get the the security settings (Im sure at this moment that ADB connectivity is disabled). I am unable to check which software this unit is running. If I try to get into the more option nothing happens, if you try to turn of parental controls the unit stated "this feature isnt availble in demostration mode". When connected in via USB - unit states its connected as media device, is listed as kindle under portable devices in device managers, and in my computer shows as a portable media player, with no contents if clicked on. If you check in the properties your can see a firmware version and a serial number but thats it.
This model has a Demo screen saver which kicks in if the unit is left idle for a few minutes, when it does is disconnects from th system then reconnects and is recognised again. If trying all this and ensuring the screensaver doesnt start still have no effect.
following this thread - http://forum.xda-developers.com/showthread.php?t=2069117
I have completed the windows 7 bug fix as here - http://forum.xda-developers.com/showthread.php?p=36373627
and attempting to install the kindle fire abd drivers or the USB_drivers the PC always states that I am currently using the correct drivers and the kindle is listed as "kindle" under portable devices.
I have also tried with the SDK package with the notes here - https://developer.amazon.com/sdk/fire/connect-adb.html
I have completed the actions in this videos also - http://www.youtube.com/watch?v=Khrxo0-NieM&feature=youtu.be
I have uninstalled the devices from my system numerours times but not matter which driver I try to install / force an update with. My system states that I am using the most upto date driver (MTP USB Device). I can uninstall the device from the system but I cant find any option to delete the drivers it auto assigns (wpdMTPdr.dll, winusb.sys, wudfrd.sys, wpdmtp.dll, wpdwtpus.dll). I would delted them manually but thought I would post here first - incase firther problems could arise.
Can anyone help with this issue, someone in this thread - http://forum.xda-developers.com/showthread.php?t=1828335&page=2
said they managed to do it, but didnt supply any info. I believe I have a driver and/or ADB connectivty issue.
At the moment I would just like to revert this Demo to a normal rooted kindle fire with the google play mod. If this isnt possible I would still like to root the device and just put an OS on there (jellybean seems to be the one of choice).
Thanks for reading this - and I look forward to the replies.
PS - The simple nood guide is by far the most informative and easy to follow guide that I have come accross. Had no problemn following the steps etc - like i said at the begging if this wasnt a demo model I am sure it would have been rooted by now. BIG BIG props to you guys especailly after seeing the lenght you go to helping people who didnt understand the guide! keep up the awesome work
Click to expand...
Click to collapse
stirky,
First, let me apologize for the delay in getting to your issue, we have been working on a new package for the Kindle
which can be viewed here: http://forum.xda-developers.com/showthread.php?t=2096888
Let us know what you think. Now to your problem. We have worked with the demo Kindles, they have security software
to eliminate program installation, even if you allow or turn on "Allow Installation of Programs". I do not understand how
someone what able to breakthrough the block since it is done at the OS Level. Maybe they hacked the Kernel? Anyways,
the task is not easy. What I would do is Fast a new system.img, boot.img and recovery.img using this software:
http://forum.xda-developers.com/showthread.php?t=2096888
If we need to flash the Kernel I will add that functionality too. What this will do is completely remove the Demo and
control/security software and turn the demo Kindle into a regular Kindle. We can ship the required Factory USB Cable
tomorrow. Read the post and send us a PM.
No worries about the delay in getting back to me! I was quite proud I finanlly managed to get it recognised on my system after trail and error.
First Question - I am now assuming that anything I need to do to this unit requires a Factory Cable? Am I correct?
. Now a note - Not sure if this helps. While playing around I did notice this little quirk.
After I had edited the google USB driver as mentioned in the above post, My system first recognised the device as an Adroid ADB interface under abndroid device. While checking back though my edit I noticed that I mistyped Composite. Rectified this and then re-installed as before. Now the devices is rocognised under Andoid Device as an Android ADB Composite interface. I then proceeded to up date the drivers agains from the Qmenu Drivers Folder. This makes the system list the device as a Kindle Fire and under this is states its now just an android ADB Interface.
I then had a brainwave and made an edit of this file and inserted the same edit as the google USB driver. This all installs fine. But still only recognised as an android ADB Interface under Kindle fire.
Does is have to be recognised as a composite device? or is a Andoird ADB Interface suffcient?
I assume I need a factory cable and will get one ASAP if thats the case.
Root and Google Play for Amazon 7" Kindle Fire HD Demo
stirky said:
No worries about the delay in getting back to me! I was quite proud I finanlly managed to get it recognised on my system after trail and error.
First Question - I am now assuming that anything I need to do to this unit requires a Factory Cable? Am I correct?
. Now a note - Not sure if this helps. While playing around I did notice this little quirk.
After I had edited the google USB driver as mentioned in the above post, My system first recognised the device as an Adroid ADB interface under abndroid device. While checking back though my edit I noticed that I mistyped Composite. Rectified this and then re-installed as before. Now the devices is rocognised under Andoid Device as an Android ADB Composite interface. I then proceeded to up date the drivers agains from the Qmenu Drivers Folder. This makes the system list the device as a Kindle Fire and under this is states its now just an android ADB Interface.
I then had a brainwave and made an edit of this file and inserted the same edit as the google USB driver. This all installs fine. But still only recognised as an android ADB Interface under Kindle fire.
Does is have to be recognised as a composite device? or is a Andoird ADB Interface suffcient?
I assume I need a factory cable and will get one ASAP if thats the case.
Click to expand...
Click to collapse
stirky,
That is perfect Android ADB Interface is sufficient.
Yes, you will need a Factory USB Cable. we do sell them and we are shipping a bunch tomorrow. I would ship it
to you Priority at no additional charge, just PM me your name, address, city, state, zip, phone and email.
You would get the cable in about 3 days. We sell the cables at our direct cost to all XDA Developer Members.
great thread... I just picked up the KF HD 8.9 demo unit myself... I have yet to install the SDK, but please let us know of any developments...
thanks...
Obtain a factory cable. Fastboot flash the system.img,recovery.img and boot.img. Then give me results. Use kindle fire first aid program.
Sent from my KFTT using xda premium
wukster said:
great thread... I just picked up the KF HD 8.9 demo unit myself... I have yet to install the SDK, but please let us know of any developments...
thanks...
Click to expand...
Click to collapse
wukster,
The Kindle Fire 8.9" does not need the Factory USB Cable, just use Option 10 in the interface. There is a known Bug in the Kindle Fire 8.9" Bootloader, if you get stuck in Fastboot, let us know, we have the fix.
Please wait until we do some updates on the software and then download it anytime after Monday 8:00am - we are doing critical updates for Kindle Fire 8.9" models.
---------- Post added at 01:09 AM ---------- Previous post was at 01:07 AM ----------
KindleFireGuy said:
Obtain a factory cable. Fastboot flash the system.img,recovery.img and boot.img. Then give me results. Use kindle fire first aid program.
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
KindleFireGuy,
Thank you for the support, for new users here is a link to the Kindle Fire First Aide software:
http://forum.xda-developers.com/showthread.php?t=2096888
Hi I dont want to hijack your thread or anything but i was wondering if you could possibly help me root my demo unit as well. This one is actually from my store but we dont keep the demos on display and would like to have it for personal use when its just 1 person in the store. (we are located in a mall so we often have just one person in the morning). I would really appreciate it if you could maybe walk me through the steps to get it recognized on adb. I have a KFHD 7". Any help or advice would be greatly appreciated.
Edit: Got it to read as "Android Composite ADB Interface" which I believe was the first step to making it work. I need a Factory Cable which from what I understand requires rewiring the B side (or the Micro USB side) of the cable so that the wire is connected to both Pin 4 and Pin 1. If so then I made a make shift one at work today and just need to solder it. Please advise if I have done anything incorrectly. I would also be interested in purchasing a factory cable from you, Prokennexusa, just in case I need it in the future or if I mess up on making mine.
Demo Kindle - Please Help
Hi
Please excuse ,my ignorance but I am struggling to get my kindle fire to work with the software I downloaded. I followed every step in the instructions and all seemed to be going well until I actually attempted to do anything with it.
I got the demo kindle from a shop clearance but cannot get the demo mode removed. I have a factory cable and the kindle goes into 'fastboot' mode with the cable but doesn't seem to behave any differently after the software states it is complete.
I have included some screen dumps of the messages I received, I apologise if I am just being dumb but I am lost?
I would be quite happy to just have a working kindle...I don't need android on it if this makes it more difficult......please help
Thanks in advance
Below is the message I received when I tried option 9 Display Fastboot status
************************************************
* OK Here We Go, We Are Beginning The Process! *
************************************************
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
*********************************
*Looks Like Fastboot is Enabled *
*********************************
Press any key to continue . . .
This when I tried option 12 Install Amazon ADB Driver
************************************************
* OK Here We Go, We Are Beginning The Process! *
* Please Make Sure The Kindle Is Disconnected *
* From USB During The Driver Installation. *
************************************************
Press any key to continue . . .
****************************************
*The Kindle ADB Driver Will Now Launch *
*Please Make Sure You Are Running This *
*Software As An Administrator Otherwise*
* This Process May Fail! *
****************************************
The system cannot find the path specified.
******************************************
*The Driver Install Was A Success! Please*
* Plug The Kindle Into USB Using The *
* Original USB Cable That Was Included *
* With The Kindle. This Is The Same USB *
* Cable You Use To Charge The Kindle *
******************************************
Press any key to continue . . .
stirky said:
Hey
I spent all night reading . . . . well pretty much every page on this forum. I am stuck - I am sure that if I had a normal Kindle Fire it would be rooted by now. I found the tutorial really easy to follow.
This demo unit automatically fires up in demo mode every time. A few notes that may help before I get into what I done. When using the swipe down menu, I only have a couple of options and cant get the the security settings (Im sure at this moment that ADB connectivity is disabled). I am unable to check which software this unit is running. If I try to get into the more option nothing happens, if you try to turn of parental controls the unit stated "this feature isnt availble in demostration mode". When connected in via USB - unit states its connected as media device, is listed as kindle under portable devices in device managers, and in my computer shows as a portable media player, with no contents if clicked on. If you check in the properties your can see a firmware version and a serial number but thats it.
This model has a Demo screen saver which kicks in if the unit is left idle for a few minutes, when it does is disconnects from th system then reconnects and is recognised again. If trying all this and ensuring the screensaver doesnt start still have no effect.
following this thread - http://forum.xda-developers.com/showthread.php?t=2069117
I have completed the windows 7 bug fix as here - http://forum.xda-developers.com/showthread.php?p=36373627
and attempting to install the kindle fire abd drivers or the USB_drivers the PC always states that I am currently using the correct drivers and the kindle is listed as "kindle" under portable devices.
I have also tried with the SDK package with the notes here - https://developer.amazon.com/sdk/fire/connect-adb.html
I have completed the actions in this videos also - http://www.youtube.com/watch?v=Khrxo0-NieM&feature=youtu.be
I have uninstalled the devices from my system numerours times but not matter which driver I try to install / force an update with. My system states that I am using the most upto date driver (MTP USB Device). I can uninstall the device from the system but I cant find any option to delete the drivers it auto assigns (wpdMTPdr.dll, winusb.sys, wudfrd.sys, wpdmtp.dll, wpdwtpus.dll). I would delted them manually but thought I would post here first - incase firther problems could arise.
Can anyone help with this issue, someone in this thread - http://forum.xda-developers.com/showthread.php?t=1828335&page=2
said they managed to do it, but didnt supply any info. I believe I have a driver and/or ADB connectivty issue.
At the moment I would just like to revert this Demo to a normal rooted kindle fire with the google play mod. If this isnt possible I would still like to root the device and just put an OS on there (jellybean seems to be the one of choice).
Thanks for reading this - and I look forward to the replies.
PS - The simple nood guide is by far the most informative and easy to follow guide that I have come accross. Had no problemn following the steps etc - like i said at the begging if this wasnt a demo model I am sure it would have been rooted by now. BIG BIG props to you guys especailly after seeing the lenght you go to helping people who didnt understand the guide! keep up the awesome work
Click to expand...
Click to collapse
stirky said:
Hey
This is My first post and im allittle nervous so......
My girlfriend was cheated out of some money when she bought a Fire Hd 8.9 from some girl. it turned out to be the Demo version.
I was able to remove the demo by going to the app store, it asked to set up wifi so i did that, loading file manager then going online downloading 1market app apk. they asked for permission to allow non market apk to be installed so i granted that.
then i went to amazon downloaded newest version of fire 8.9 placed it on update folder from my file manager.
then i downloaded adw launcher apk from 1market store.
This launcher allowed me to access device from settings and from there i updated my kindle fire. it removed the demo version and now running latest version and no demo.
I did all this after rooting the device but i see no way that this method wont work on non rooted devices.
Only difference is that there is no lock screen on the kindle. but besides that works great......
This answering questions thing is hard please dont ever make me do this again....
Click to expand...
Click to collapse
Root or reload KFHD 8.9
wukster said:
great thread... I just picked up the KF HD 8.9 demo unit myself... I have yet to install the SDK, but please let us know of any developments...
thanks...
Click to expand...
Click to collapse
Were you able to root or reload the DEMO unit to a regular tablet?
I have just purchased an 8.9 unit myself and have not seen anyplace for sure if these units can be reworked since ADB is not enabled.
Regards Jery
KindleFireGuy said:
Obtain a factory cable. Fastboot flash the system.img,recovery.img and boot.img. Then give me results. Use kindle fire first aid program.
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
I have a kindle hd 8.9 demo, I do not know if this tool will help
lkmgfy said:
I have a kindle hd 8.9 demo, I do not know if this tool will help
Click to expand...
Click to collapse
I was able to get the demo 8.9 loaded with the regular Kindle software but, with a slightly different method.
I used Soupmagnet's restore image LINUX script that flashes a pre-rooted 8.9 Kindle version 8.1.4 image to the kindle using fastboot.
http://www.adrive.com/public/xvZeWC/KFHD8.9.restore.zip
While the rest of the demo unit is shut down, fastboot will work if the script is executed prior to plugging in the tablet.
The script will set waiting to see fastboot (waiting for device).
When the tablet is booted up, it passes briefly thorough a fastboot cycle and the script will catch it and keep the tablet in fastboot (pretty much as the KF 1 does). The script then loaded version 8.4.1 and success. You can then download the latest Kindle OS and loose root and be back to a stock configuration or continue and push 2nd bootloader, twrp,etc. and or new ROM.
Success of course depends on having the USB and ADB drivers loaded on LINUX (Using Soupmagnet's soupkit will do that for you).
You will have to try the soupkit again package and see if it will work for you. This package is intended for all kindles I believe.
I had all the drivers loaded using the first soupkit package and the drivers worked to see and communicate with the 8.9 tablet.
Original Soupkit:
http://forum.xda-developers.com/showthread.php?t=1850038
New "Soupkit Again"
http://forum.xda-developers.com/showthread.php?t=2162986
However, I installed the new "Soupkit Again" package over the first Soupkit package and while the drivers still work, I lost all access to the Soupkit utility itself (which is not used to restore the 8.1.4 image to the Kindle 8.9). A little off topic, but, I would like to know how to get my Soupkit utility back working. (The soupkit.sh script is missing after installing the new "Soupkit Again" over the original Soupkit).
So I have run into several problems using several different methods, none of which have worked properly and I really need some help. Now, I am by no means stupid when it comes to computer stuff but I am not a programmer nor any sort of software engineer. I understand much of the command line stuff and some simple code but I don't understand why nothing I have tried is working. So let me list the problems I've run into in my attempts to root my KFHD 7":
Root Many Android:
I am using v28 (which I believe is the latest and is reported to work on my device hardware and software).
I am unable to run the batch file as an administrator which I believe is the problem that results in the "permission denied" errors when trying to push the packages like superuser and busybox.
I am certain I have followed the tutorial to the letter so I don't know where I am going wrong. I can open the command window as an admin and cd to the C:\Root and run the batch but that doesn't fix the permissions errors.
Qemu:
I am using the latest version.
I select option 1 to root and it runs through the processes but nothing works and it just goes through several reboots so I am assuming it is running into the same issues as RMA, above.
KFFirstAide:
I am using the 64 bit as per my system. I run through option 21 to root my device using method 2 (Preferred).
It shows some success in that I can see the apps BusyBox Installer and Root Checker, however it does not push the rest of the packages necessary and this is evident by when it says I should receive a SuperSU or SuperUser popup, nothing happens and so the rest fails, though it says the root check passes in the final step.
So now I ask, is there a better way or something I am doing wrong with my Kindle Fire HD 7" 7.3.1?
Thanks in advance.
Hi all,
I'm new here, and I've been trying for the past few hours to root my Kindle Fire HD 7" so I can install a CM10.1 ROM and turn it into a google tablet. I've been searching the web for information, and I kept getting directed here so I decided I might as well join.
Anyway it seems the one method that works is the Bin4ry one, and I started following the instructions given on this site and others. However when I installed the driver, it said the installation was successful but when I clicked "Finish" a window popped up and told me the driver didn't install properly. Then I tried to execute the "Run Me" file, but it gave me this:
"Please connect device with enabled USB-debugging to your computer.
the system cannot find the path specified
doing a backup first, please confirm this on your device
the system cannot find the path specified
Done!"
Nothing happens on the Kindle Fire. But I checked the Device Manager, after I downloaded and installed a driver linked in a thread on this forum, it said the Kindle was USB-enabled interface. Anyone have any idea what the problem is, here? Thanks
Ok did you enable usb-debugging in the kindle's security settings? If you have try opening a command prompt and CD into the directory of the adb command in binary's root tool, run adb devices and see if the kindle is listed.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Ok did you enable usb-debugging in the kindle's security settings? If you have try opening a command prompt and CD into the directory of the adb command in binary's root tool, run adb devices and see if the kindle is listed.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Yep, USB-debugging is enabled. It's the same thing as enabling ADB, right? This is what I've done thus far. I'm running Windows 8, so I've disabled driver signature enforcement, and also installed the drivers. I've checked Device Manager---the system has recognized the Kindle as a Google Android ADB interface, and if I check adb devices in cmd prompt, the serial number of my Kindle is listed. Also created an adb_usb.ini file according to these instructions:
"open adb_usb.ini with notepad
(add on one line each!)
0x1949
0x006
save file."
The problem now is not that nothing happens on the Kindle when I run the root tool, I do get the option to restore data but it prompts me to enter a data encryption password. I researched this and a techleopard article said to enter my Amazon password, which I did but nothing happens. The data restore options (Restore or Do Not Restore) just grey out and the root tool just says "Running" for ever and ever. Tried some other root tools such as Quemp and Kindle Fire Utility, but neither worked and besides the more recent information I've seen have Bin4ry's as the only one that works on 7.4.6 which is the OS I am using.
EDIT: Okay, tried it again and for some reason this time the root tool ran successfully. I did a power reset, and ran a RootChecker, and it says it's rooted but I can't find the SuperUser app (the checker also could not find it). Was the root still successful?
Probably though I am throwing a guess that only the such binary is installed, look in the /system/xbin folder and see if the such binary is there, if you want to to retry the process just delete that file. I was going to mention the encryption password is whatever your lock screen code is set to.
BTW don't ever use kfu to try to root your kindle, it will hard brick it. Its designed only for kf1's.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Probably though I am throwing a guess that only the such binary is installed, look in the /system/xbin folder and see if the such binary is there, if you want to to retry the process just delete that file. I was going to mention the encryption password is whatever your lock screen code is set to.
BTW don't ever use kfu to try to root your kindle, it will hard brick it. Its designed only for kf1's.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Heh, actually after a LOT of messing around, and perusing several articles across the web and on xda, I've got it working. KFU didn't brick anything, just didn't work. My only regret is that I now can't access the HD quality movies I'd bought from Amazon because Amazon only allows downloading to the Kindle and the Kindle only, and my internet isn't fast enough to stream HD.
Hi, I'm new to this whole android thing. I got a Kindle Fire HD 7" it's rooted with SuperSU and Google Play store on it successfully!
My main issue is it seems many tweaks like a reboot after installation, but my power button is completely missing. I can plug the device in to turn it on, and open/close the cover to put it to sleep.
Are there any tweaks around where I can like slide to power down, or force reboot how you would if you were to press the power button?
Alternately, I'd also like to remove the ad lock screens and potentially install a live wallpaper on either the lock screen or the home page. And maybe have an actual android grid set up. I know you need a secondary launcher to do this kind of thing, but all the ones I looked at screamed brick, and I got a bit worried. Could anyone point me at some basic tutorials? (I've jailbroken my Ipad rather extensively, but this seems to be a bit more in-depth to the actual operating system)
ETA: I haven't Used QMenu Just the ABD Drivers and the Root_with_Restore_by_Bin4ry_v33
If this is the 2012 model with a camera you can flash cm 11 on it and use maromi's kernel, it has double tap to wake, and cm also has double tap corner to sleep.
There are apps in the Google play store for rebooting methods that I believe allow for reboot normally as well as to fastboot and recovery, I know CM's built in power menu has those option if you enable them, but then there's the issue of getting to them with a broken power button.
Sent from my Amazon Tate using Tapatalk
It is the 2012, it has the camera with the clear slider to unlock.
I installed Nova Launcher off the G-play store, but yet again something needs to be rebooted! Hmph.
I'd love if you have any links to those store based power options, or to the CM 11 (is that a launcher also? what does "Flash" mean exactly? I've seen it around. ) The power button issue sucks, but I can't complain since it was a free gift!
I guess I can just run the battery down to reboot, but that is such a pain.
Dovetail said:
It is the 2012, it has the camera with the clear slider to unlock.
I installed Nova Launcher off the G-play store, but yet again something needs to be rebooted! Hmph.
I'd love if you have any links to those store based power options, or to the CM 11 (is that a launcher also? what does "Flash" mean exactly? I've seen it around. ) The power button issue sucks, but I can't complain since it was a free gift!
I guess I can just run the battery down to reboot, but that is such a pain.
Click to expand...
Click to collapse
hehe wow this is a first, ok cm 11 is cyanogen mod 11. its a rom you can flash instead of amazon's original os, it is way faster and more up to date and is more like pure android. Flash basically means we are overwriting the system files and such that came with the device. It can have any launcher, set wallpaper, is already rooted and has alot of cool things like themes and performance options you can set, much better than stock amazon os. You seem quite new to the concept of flashing a rom though so i advise you to read the tutorial thouroughly and as long as you don't mess up you shouldnt need a fastboot adapter even though its always advised to have one anyways. Heres a link: http://forum.xda-developers.com/showthread.php?t=2271909
Let me give you some advice so you don't end up with a red screen brick. Make sure when you follow this that when you see the red text at the top of fireflash(you will understand this when you start this part) that you check that box off thats either to the side or above the red text, this is a vital step you must follow or you will need a fastboot adapter to fix. I also recommend grabbing the cm rom and its corresponding gapps ahead of time.
Feel free to ask questions.
Also if you install a launcher on amazon os you will need root and you must copy and paste the app into the system folder and set the permission to a certain way or it will bootloop. I think titanium backup has a convert to system app button that does it for you. Wallpaper doesnt defaultly work without my fix either.
Nevermind, it finally worked
stunts513 said:
Feel free to ask questions.
Click to expand...
Click to collapse
Thank you so much for being patient with me!
I had been doing the app thing, but it seems like such a pain to do that with every app. I removed the installer, it wasn't doing much of what I was wanting anyways, the CM11 sounds much more like what I'm wanting to get to.
I'll give the tutorial a good read through and update this post with any questions I have!
Question 1: "commonly associated .... higher without first flashing the Amazon OS 7.2.3 bootloader" With flashing the cm11 do I need to (or do you recommend I) first restore or go back to the 7.2.3 or can I continue with 7.4.8? I will obviously be making backups as it seems that's the only way to recover with a standard usb cable.
Question 1A: If you are NOT on the 7.2.3 bootloader (you'll see red letters warning you), then hit the check box next to that to flash the 7.2.3 bootloader, otherwise you'll see a red screen after you reboot. If you don't see that warning, you're fine, move on. Is this the box you mentioned? It seems like this saves the hassle of going to 2.3 THEN flashing.
Question 2: "Alternatively, you can use this if the first method failed: Root_with_Restore_by_Bin4ry," I used this method in the first place. I had some issues with the ABD drivers not being recognized but got them working when I used amazon's direct ones. Furthermore, when I did get rooted (I used an app to check that it was and since nova worked I assume it was correct) superuser wasn't installed. I went and installed superSU manually. will this be an issue? (things have asked for and been granted permission and show as such in the superSU app)
Question 3: I'm using my work computer which runs through a server. when I go to back up through cmd it says the folder will be in C: and to then transfer it. The server shouldn't matter, right? I guess I can always just do a search for the file name and it'll turn up somewhere.
Question 4: Once you have the .zip files for the ROMs with GApps (Google apps, like Play Store), place them on the sdcard, and turn off the device. Turn it on, hold Volume-Up before the logo turns blue, and enter TWRP I did find an app called "reboot" which allows me to reboot (shocking!) without the power button. Can I still use that app at this point?
Question 4A: Once there, immediately do two things: make a backup, and after that, wipes: system, factory reset, cache, and Dalvik cache.After it finishes, go ahead and again, wipe cache and Dalvik cache, then reboot This section calles to wipe some sections, will this also wipe my apps? it calls later on to reboot again. If the first bit wipes the apps, then I wouldn't be able to reboot at this point. (aside of waiting for the battery to die)
Answer 1: you don't actually need to downgrade the os, as long as the bootloader gets downgraded it is fine. So yes that was the checkbox I meant, believe it or not people have missed seeing it before because of the red text around it.
Answer 2: I think it will be fine, though I'm surprised you could root it with Amazon's drivers, theirs were kinda crappy.
Answer 3: I think this is OK, not sure how your setup is exactly. I don't see network issues being a problem.
Answer 4: you can still use the app. As to the wiping, yes you will lose all your apps, it is required to do the equivalent of a factory reset in twrp when coming from amazon os as the system apps leave some data left behind that causes cm to malfunction. You can install anything you had again from the play store or manually if you had apk's lying around. You can backup app data for games and such with titanium backup and restore it once you reinstall titanium backup in cm.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
Answer 1: you don't actually need to downgrade the os, as long as the bootloader gets downgraded it is fine. So yes that was the checkbox I meant, believe it or not people have missed seeing it before because of the red text around it.
Answer 2: I think it will be fine, though I'm surprised you could root it with Amazon's drivers, theirs were kinda crappy.
Answer 3: I think this is OK, not sure how your setup is exactly. I don't see network issues being a problem.
Answer 4: you can still use the app. As to the wiping, yes you will lose all your apps, it is required to do the equivalent of a factory reset in twrp when coming from amazon os as the system apps leave some data left behind that causes cm to malfunction. You can install anything you had again from the play store or manually if you had apk's lying around. You can backup app data for games and such with titanium backup and restore it once you reinstall titanium backup in cm.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Thank you so much again! I'm excited! I'll let ya know how it goes.
Sweet and I thought I'd mention if you get confused on what cm 11 build to download, the unofficial builds are a little bit more dated now that the device is a officially supported cm device, I recommend the link that isn't under mirrors that goes to cyanogenmod's Tate download page. The URL has those 3 words in it so you will know it when you see it. The m6 release is the stable release I recommend download instead of a nightly, I think m7 should be out soon, the cool thing is whenever a update is available it can ota like a phone, I believe it will make you choose to install the update though. I was impressed by how it updates, just seemed cool to watch. Not positive if cm's updater notifies you when updates are available though.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
The m6 release is the stable release I recommend download instead of a nightly, I think m7 should be out soon
Click to expand...
Click to collapse
Firstly, when I go to back up through the command prompt I get this:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\admnasst>adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot
0block.img"
'adb' is not recognized as an internal or external command,
operable program or batch file.
Am I missing some step? I do have ABD enabled on the kindle.
Secondly, on this site: http://download.cyanogenmod.org/?device=tate
am I wanting the download second from the bottom that says "snapshot" and ends with m6-tate
I would figure so, but I wanted to double check.
Yes that the right file, as to that command not being recognized it is because it expects you to have a copy of that command handy and in the directory the command prompt is cd'd into. For instance download my wallpaper fix in my signature and extract it, then shift + right click the folder and hit open new command window here, then try the command again.
I have and by itself laying around on a thread I made here on the forum but this works just as well.
Sent from my LG-P769 using Tapatalk
stunts513 said:
Yes that the right file, as to that command not being recognized it is because it expects you to have a copy of that command handy and in the directory the command prompt is cd'd into. For instance download my wallpaper fix in my signature and extract it, then shift + right click the folder and hit open new command window here, then try the command again.
I have and by itself laying around on a thread I made here on the forum but this works just as well.
Sent from my LG-P769 using Tapatalk
Click to expand...
Click to collapse
I ran the first line and it started. I'm going to do everything tomorrow when I have more time. I'll keep you updated! Thank you again for helping me, and being so welcoming.
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot this was my favorite reboot app and it works well although I see your doing the custom ROM thing now.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
ROM toolbox has a quick-reboot option that is similar to respringing iOS, and it well let you create a launcher shortcut on your home screen.
>>>Sent from my homebuilt TARDIS running Android 4.4... or maybe it's a Kindle Fire HD running Cyanogenmod 11<<<