I werdly bricked my Xperia T... - Sony Xperia T, TL, TX, V

I tried to install Clockworkmod on my Xperia T and somehow I managed to completely brick my phone. (I was using custom karnel)
I can get to the recovery menu without any problems, but when I close it, screen just turns black and nothing happens. If I try simulated batery pull it just boots up SONY logo from where I can get back to recovery menu. I also tried to get my phone to fastboot or flashmode but my PC doesn't regoionize it.
I have no idea what is wrong. Installation was smooth and I was already doing the same thing but with Android version 4.1.
Is there any posibility to restore karnel from recovery or any other solution.

Important
Read This :
http://forum.xda-developers.com/showthread.php?t=1849170
It Will Help U Much

Thanks it helped a lot. I just had to do hard reset adn than installed ROM with flashtool.
Is there any other way of installing recovery on 4.3?

Important
Blazzx said:
Thanks it helped a lot. I just had to do hard reset adn than installed ROM with flashtool.
Is there any other way of installing recovery on 4.3?
Click to expand...
Click to collapse
Read Those Carefully :
http://forum.xda-developers.com/showthread.php?t=2261606
http://forum.xda-developers.com/showthread.php?t=2654451

Amr Nasser said:
Read Those Carefully :
http://forum.xda-developers.com/showthread.php?t=2261606
http://forum.xda-developers.com/showthread.php?t=2654451
Click to expand...
Click to collapse
I've tried both. First one fails at install because my phone isn't rooted. Second one it flashes karnel but my screen stays black after I turn on the phone.
Any other idea?

Related

Turning on the phone with "update" SEUS or flashing original ROM

Hello I have a problem ... I uploaded the ROM from XDA xRecovery over. Installation was fine. But after installation, you get to the menu moves xRecovery just boot the Sony Ericsson disappears and then appears on screen boot ROM installed, and there it freezes and I can wait as long as I want. When I want to fix it via SEUS phone by itself turns the same even FlashTools. I have Xperia X8. Please advise .. thanks
Wipe data, cache and try reinstall it!
.
damir87 said:
Wipe data, cache and try reinstall it!
Click to expand...
Click to collapse
How? One could get into the menu xRecover: (... sorry my bad english
I guess you are upgrading from stock 2.1 and that you know get into recovery by pressing back button few times when SE logo shows on boot! If you can't enter recovery I'm afraid that your rom is not installed properly!
.
damir87 said:
I guess you are upgrading from stock 2.1 and that you know get into recovery by pressing back button few times when SE logo shows on boot! If you can't enter recovery I'm afraid that your rom is not installed properly!
Click to expand...
Click to collapse
is not correctly installed. So is any solution? If it does not work xRecovery menu .. Some "hard delete"?
Seus, pcc, flashtool try something its just soft brick and you can repair by yourself!
.
damir87 said:
Seus, pcc, flashtool try something its just soft brick and you can repair by yourself!
Click to expand...
Click to collapse
When I connect my phone off the SEUS. So self starts. Also, it makes even the flashtools
Try reinstall Gordons gate! Restart computer connect phone while you holding back button and flash stock rom! That's procedure for flashtool! If don't work try PC Companion and repair button
.
Resolved. Ultimately helped PC Companion

[Q] Sony Ericsson text won't disappear

hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
repair it with PCC
Xaverek said:
hi, I am having trouble booting my mothers' X8. She was using mini cm7 and it was starting to be very slow so I backed it up and flashed it again. flashing was completed successfully but when I tried to boot the phone, the Sony Ericsson text did not disappear. I left it running whole night but nothing happened. I can't even boot to xrecovery. What should I do now? Is there any way I can get the phone working again?
thanks a lot!
Click to expand...
Click to collapse
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
BlackRabbit1703 said:
confuse to using SCC
quick way
flash the stock kernel 2.1 ..download it from my signature
and flash with flashtool
Click to expand...
Click to collapse
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Xaverek said:
so I downloaded the stock kernel and flashtool, but the app won't recognize the device. it still shows that I should hold back button on my phone while plugging the cable. I was holding the button for about three minutes but nothing changed. what should I do?
edit: oh and the red LED is flashing.
edit2: nevermind, battery was drained. now I just need to find drivers for my x8
Click to expand...
Click to collapse
download
driver x8
gordon gates
install driver from C:\Flashtool\Driver
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
It's just soft brick so you should have flashtool and some ftf files for your device maybe stock firmware and baseband update so you can unbrick your soft bricked device for any time. Just enter the flash mode and flash it! That's it! Just some advice for you
PS. Don't say thanks. Click "Thanks"
Xaverek said:
thanks, I've got it already. phone is working, I just had to install xrecovery again.
thank you all
Click to expand...
Click to collapse
well done dude! :good:

[Q] Bricked my phone... but weirdly.

Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Have you tried with flashtool as described in this post: http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2 ?
stamatis said:
Have you tried with flashtool as described in this post: http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2 ?
Click to expand...
Click to collapse
Yes, I tried Flashtool, SEUS and PCC. I un-bricked it from soft bricks quite a few times. But I can't now because I can't boot on flash mode.
TheDogWithoutFear said:
Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Click to expand...
Click to collapse
Dude looks like it just a soft brick ... u can download the official firmware for this model and try to flash it from flashtool..power off phone, hold back button key left on right side and connect the USB to PC at the same time,... PC will detect your phone and turns to blue light..
In my case i totally ****ed up when i tried to unlock the bootloader. Now my phone is totally dead.. can't go to falshmode, phone won't start at all... but in your case at least your phone is turning on in sony ericsson logo which means its just a soft brick ...
heerarana said:
power off phone, hold back button key left on right side and connect the USB to PC at the same time,... PC will detect your phone and turns to blue light..
Click to expand...
Click to collapse
That is called booting to flash mode, and that's what my phone can't do... the main reason I'm posting here.
TheDogWithoutFear said:
Hello... I seem to have bricked my phone but it's a weird brick. I tried a new ROM since I was having problems with my old one, and it got stuck on a reboot loop. I just didn't know what to do and (very stupidly, in retrospective...) just wiped the system partition. Now of course I can't access xRecovery (to be fair, they warned against doing that) and I don't remember if I had CWM installed at the time.
The phone was rooted, stock kernel.
Now, I can boot the phone and get stuck on Sony Ericsson logo... so far so good. But when I try to get it into flash mode, it won't boot. Is there anything I can do to un-brick it?
I tried Flashtool, PCC and SEUS. But since I can't boot into flash mode, it doesn't work.
If there's any more info I can provide please tell me and I will.
Thanks a lot.
Click to expand...
Click to collapse
if you have unlocked bootloader.
try this. it should go into flash mode this way.
launch flashtool. select some kernel. alfs or nAa.
take the phone battery out. connect the usb and then put in the battery immediately.
it should start flashing the kernel. then you can use the cwm integrated in the kernel
CnC-ROCK said:
if you have unlocked bootloader.
try this. it should go into flash mode this way.
launch flashtool. select some kernel. alfs or nAa.
take the phone battery out. connect the usb and then put in the battery immediately.
it should start flashing the kernel. then you can use the cwm integrated in the kernel
Click to expand...
Click to collapse
Thanks! But I don't have unlocked bootloader, mine is one of the ones you can't unlock safely
TheDogWithoutFear said:
Thanks! But I don't have unlocked bootloader, mine is one of the ones you can't unlock safely
Click to expand...
Click to collapse
try the same method with seus instead of flashtool
CnC-ROCK said:
try the same method with seus instead of flashtool
Click to expand...
Click to collapse
Well... I don't know how since it wasn't working, but I got it to boot in flash mode with SEUS... but it says it doesn't have any software available for my device? Both in SEUS and PCC.
TheDogWithoutFear said:
Well... I don't know how since it wasn't working, but I got it to boot in flash mode with SEUS... but it says it doesn't have any software available for my device?
Click to expand...
Click to collapse
that was the point.. to boot into flash mode
:silly:
http://forum.xda-developers.com/showthread.php?t=1597268
get it to flash mode however you got it. seus or battery removal method and then
follow from step C. download the rom in post and install using flashtool
---------- Post added at 07:16 PM ---------- Previous post was at 07:13 PM ----------
or follow this now
http://forum.xda-developers.com/showthread.php?t=1356349
CnC-ROCK said:
that was the point.. to boot into flash mode
:silly:
http://forum.xda-developers.com/showthread.php?t=1597268
follow from step C. download the rom in post and install using flashtool
Click to expand...
Click to collapse
I imagined xD. I just tried with that too.
With flashtool, it gets stuck on "Reading device information" (I wanted to post edit and post this but the forum didn't let me xD). I'll let it try a little bit longer, but it's been a while.
TheDogWithoutFear said:
I imagined xD. I just tried with that too.
With flashtool, it gets stuck on "Reading device information" (I wanted to post edit and post this but the forum didn't let me xD). I'll let it try a little bit longer, but it's been a while.
Click to expand...
Click to collapse
if it fails for any reason then try flashing older baseband and then try seus. i dont remember if flashing baseband requires unlocked bootloader but its worth the effort
CnC-ROCK said:
if it fails for any reason then try flashing older baseband and then try seus. i dont remember if flashing baseband requires unlocked bootloader but its worth the effort
Click to expand...
Click to collapse
Okay, it's been stuck for about an hour. Tried flashing the older band, it gets stuck on "reading device..." too.
TheDogWithoutFear said:
Okay, it's been stuck for about an hour. Tried flashing the older band, it gets stuck on "reading device..." too.
Click to expand...
Click to collapse
try the repair option in seus if its still there.
i once got into this situation had to keep trying seus till it stopped showing the "no software update found" or whatever it is. keep trying with seus. its your only free hope.
Try different basebands...
AlchemistDS said:
Try different basebands...
Click to expand...
Click to collapse
desperate to get 10 posts? it was already suggested. please read before posting.

[Q]Cannot boot into Recovery

Hello guys, yesterday I've got installed iHackers rom on my Z1. After that I changed my mind, and wanted to install another rom, but here's I've got a problem. When i turned off my phone, and turn on it I don't have any LED Light. I've tried a lot of times to get into recovery, but I cant. I installed new TWRP by NUT, but it doesn't work. Please help guys!
Cierni_ said:
Hello guys, yesterday I've got installed iHackers rom on my Z1. After that I changed my mind, and wanted to install another rom, but here's I've got a problem. When i turned off my phone, and turn on it I don't have any LED Light. I've tried a lot of times to get into recovery, but I cant. I installed new TWRP by NUT, but it doesn't work. Please help guys!
Click to expand...
Click to collapse
Flash stock firmware via flash tool and start again...
But iHackers rom works fine. I only dont have any LED Light when I turning on my device ;(
Cierni_ said:
But iHackers rom works fine. I only dont have any LED Light when I turning on my device ;(
Click to expand...
Click to collapse
I think you somehow lost your recovery..
Try flashing back recovery using nuts dual recovery installer using pc.
I had same problem with iHackers so i switched to other stock based roms and they all are awesome... :thumbup:
See link here
http://forum.xda-developers.com/showthread.php?t=3042439
kathanpatel1001 said:
I think you somehow lost your recovery..
Try flashing back recovery using nuts dual recovery installer using pc.
Click to expand...
Click to collapse
Not working. I tried it a few times. I don't have any LED Light when I turning my phone on and (I think) because of that I cant boot into recovery I guess.
Cierni_ said:
Not working. I tried it a few times. I don't have any LED Light when I turning my phone on and (I think) because of that I cant boot into recovery I guess.
Click to expand...
Click to collapse
Try to flash stock rom via flash tool then root and install nuts dual recovery it will work.. :thumbup:
I had similar problem with ihackers rom. Its great rom but has some problems...try similar stock based roms all roms are great...
kathanpatel1001 said:
Try to flash stock rom via flash tool then root and install nuts dual recovery it will work.. :thumbup:
I had similar problem with ihackers rom. Its great rom but has some problems...try similar stock based roms all roms are great...
Click to expand...
Click to collapse
I'm green, sorry bro http://forum.xda-developers.com/xperia-z1/development/c6903-14-1-0-157-t2931802 I must to do this, yeah?
Cierni_ said:
I'm green, sorry bro http://forum.xda-developers.com/xperia-z1/development/c6903-14-1-0-157-t2931802 I must to do this, yeah?
Click to expand...
Click to collapse
Yupp confirm your z1 version first (i.e. Is your z1 C6903) before flashing this... :thumbup:
kathanpatel1001 said:
Yupp confirm your z1 version first (i.e. Is your z1 C6903) before flashing this... :thumbup:
Click to expand...
Click to collapse
Yeah, I've got C6903, but that solve not working.
Cierni_ said:
Yeah, I've got C6903, but that solve not working.
Click to expand...
Click to collapse
Sorry i didn't get you..! What is the problem you are facing??
With your phone off and unplugged, setup Flashtool to flash the FTF of your choice.
When you're ready, press and hold the volume up button, and then plug in the device.
The LED will flash red and green quickly. You are in Flashmode now. Flashtool should be working away. Leave it plugged in until prompted to restart (watch the log).
Wiltron said:
With your phone off and unplugged, setup Flashtool to flash the FTF of your choice.
When you're ready, press and hold the volume up button, and then plug in the device.
The LED will flash red and green quickly. You are in Flashmode now. Flashtool should be working away. Leave it plugged in until prompted to restart (watch the log).
Click to expand...
Click to collapse
Thanks for reply, but I dont have any led light, thats my problem. When I want to do something, like get into Recovery, I restart my phone and I dont have any LED light, when I plugging in the device - same.
I have the same problem buddy but if you have a computer just install a recovery by downloading the file from NUTS web page (search for dual recovery for z1) and let the PC detect your device. In command prompt it will ask you to hit option 1 or 2 and it's pretty self explanatory. Don't worry about the Led, just flash the recovery using your computer.

[Q] Cannot get Xperia SP into recovery.... Stuck on Sony Logo!

Hi there,
I'm still very new to this so I'm gonna try to describe this the best way that I can.
Basically I have a Xperia SP C5303 and I was getting frustrated of it being slow and keyboard failing to pop up - these are just a few of the issues I had with this phone. I had previously downloaded the 4.3 update for the phone. So basically I thought "let me try to update it to 4.4". So I google the update and put in on the SD card on the phone. So I enter recovery, and follow the instructions (wipe all user data) and then I go to install the "cm-11-20150412-NIGHTLY-huashan.zip" It then came up with an error saying it could not be installed. So i'm panicking here and did the mistake of restarting the phone. Now the phone is stuck on the Sony logo and I cannot get it into recovery no matter pressing the up and down volume button.
Can anyone please help me? I do not have a phone now and as a man I am not afraid to say it made me shed a tear or two a bit.... But anyways, if you can please help. Thank you you wonderful people.
Hello you managed to solve? or you still need help?
thewinterman said:
Hi there,
I'm still very new to this so I'm gonna try to describe this the best way that I can.
Basically I have a Xperia SP C5303 and I was getting frustrated of it being slow and keyboard failing to pop up - these are just a few of the issues I had with this phone. I had previously downloaded the 4.3 update for the phone. So basically I thought "let me try to update it to 4.4". So I google the update and put in on the SD card on the phone. So I enter recovery, and follow the instructions (wipe all user data) and then I go to install the "cm-11-20150412-NIGHTLY-huashan.zip" It then came up with an error saying it could not be installed. So i'm panicking here and did the mistake of restarting the phone. Now the phone is stuck on the Sony logo and I cannot get it into recovery no matter pressing the up and down volume button.
Can anyone please help me? I do not have a phone now and as a man I am not afraid to say it made me shed a tear or two a bit.... But anyways, if you can please help. Thank you you wonderful people.
Click to expand...
Click to collapse
Hello my friend, I assume you´re on locked bootloader, right?
If it is so, you flashed the wrong Rom. Anyway, don´t panic - not a big problem.
When you have restarted your phone, you started it without any system. No wonder, that doesn´t work
Ok. let´s go:
First, you have to flash a new stock Rom. Go here http://forum.xda-developers.com/showthread.php?t=2311964
Second step - root it and install a recovery. Got to the thread of our Guru Doomlor http://forum.xda-developers.com/showthread.php?t=2354704
read the steps carefully, so you can´t make any mistake!
Step three - on locked bootloader you can only flash a Rom for LBL!!!
If you want a CM11 Rom I recommend bagyusz´CM11 Rom from here http://forum.xda-developers.com/showthread.php?t=2735975
If you will follow all the steps you will have back an excellent CM11 Rom with much, much fun.
Goodl luck, reinipic.:fingers-crossed:
reinipic said:
Hello my friend, I assume you´re on locked bootloader, right?
If it is so, you flashed the wrong Rom. Anyway, don´t panic - not a big problem.
When you have restarted your phone, you started it without any system. No wonder, that doesn´t work
Ok. let´s go:
First, you have to flash a new stock Rom. Go here http://forum.xda-developers.com/showthread.php?t=2311964
Second step - root it and install a recovery. Got to the thread of our Guru Doomlor http://forum.xda-developers.com/showthread.php?t=2354704
read the steps carefully, so you can´t make any mistake!
Step three - on locked bootloader you can only flash a Rom for LBL!!!
If you want a CM11 Rom I recommend bagyusz´CM11 Rom from here http://forum.xda-developers.com/showthread.php?t=2735975
If you will follow all the steps you will have back an excellent CM11 Rom with much, much fun.
Goodl luck, reinipic.:fingers-crossed:
Click to expand...
Click to collapse
Hey there,
I've tried all the steps and my phone is still stuck on the Sony logo is my phone broken?
thewinterman said:
Hey there,
I've tried all the steps and my phone is still stuck on the Sony logo is my phone broken?
Click to expand...
Click to collapse
Hi, what do you mean with "tried all the steps"???
Did you flash a stock .ftf Rom with Flashtool?
It is nearly impossible to brick the XP.
Please give me more details, what you´ve done.
Greets, reinipic
reinipic said:
Hi, what do you mean with "tried all the steps"???
Did you flash a stock .ftf Rom with Flashtool?
It is nearly impossible to brick the XP.
Please give me more details, what you´ve done.
Greets, reinipic
Click to expand...
Click to collapse
I've downloaded the .ftf file onto my laptop, but getting my phone to open the file is an issue because when i connect the SP onto the laptop, it switches on the phone but has been stuck on Sony logo for the past couple of hours. The Recovery_SP.zip and DooMLoRD are both not picking up the phone as plugged in on USB drivers.
thewinterman said:
I've downloaded the .ftf file onto my laptop, but getting my phone to open the file is an issue because when i connect the SP onto the laptop, it switches on the phone but has been stuck on Sony logo for the past couple of hours. The Recovery_SP.zip and DooMLoRD are both not picking up the phone as plugged in on USB drivers.
Click to expand...
Click to collapse
ok. listen: give away the back cover of your phone - there ist down the RESET BUTTON! Press him for a few seconds, until the phone vibrates three times! Then ist is switched off.
Now you can start flashing
Greets, reinipic

Categories

Resources