Hi all! I'm completely lost trying to find the right recovery rom for my phone. I can't get S-Off, so I'm going to just flash stock recovery/rom onto the phone. However, because it's a later firmware I'm struggling to find the correct ROM. Guru reset didn't come with working screen drivers and running an update mutilated the install. RUU.exe's don't work even with stock locked recovery. Running ARHD 81 with TWRP 2.6.3.3
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4299mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
cemicolin said:
Hi all! I'm completely lost trying to find the right recovery rom for my phone. I can't get S-Off, so I'm going to just flash stock recovery/rom onto the phone. However, because it's a later firmware I'm struggling to find the correct ROM. Guru reset didn't come with working screen drivers and running an update mutilated the install. RUU.exe's don't work even with stock locked recovery. Running ARHD 81 with TWRP 2.6.3.3
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4299mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
Click to expand...
Click to collapse
I can not find a Guru Reset for your version but here is the RUU 5.14.531.11, since it is a RUU you will have to "Relock" your bootloader to run this file. It will take you back to stock and if you want you can then update your phone to the latest version over the air. I'm not sure which RUU you tried to run but if it was the 3.24.531.3 version then it is lower than your version. With S-ON you can only run those that are the same or higher than your version with a hboot 1.56 you should run 4.xx.531.x. My guess the Guru Reset was a earlier version as well.
majmoz said:
I can not find a Guru Reset for your version but here is the RUU 5.14.531.11, since it is a RUU you will have to "Relock" your bootloader to run this file. It will take you back to stock and if you want you can then update your phone to the latest version over the air. I'm not sure which RUU you tried to run but if it was the 3.24.531.3 version then it is lower than your version. With S-ON you can only run those that are the same or higher than your version with a hboot 1.56 you should run 4.xx.531.x. My guess the Guru Reset was a earlier version as well.
Click to expand...
Click to collapse
You are awesome! I've been so lost in all these version numbers and this one worked perfect!!
I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
When I use ruus matching my config i get this error "Invalid sparse file format at header magi"
THC Butterz said:
I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
Click to expand...
Click to collapse
Remove your IMEI number and serial number from your first post.
Just use this to return to stock by @clsA put TWRP recovery on your phone, do a full wipe, push or sideload the zip file to your internal storage and then flash it.
http://www.htc1guru.com/dld/guru_reset_m7_5-12-502-2_clsa-zip/
You don't get rid of dirty, its normal, they all say that.
THC Butterz said:
I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT38WW902359
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
When I use ruus matching my config i get this error "Invalid sparse file format at header magi"
Click to expand...
Click to collapse
Which RUU do you want to flash. A link would be great :good:
I tried to flash every att ruu I could find, but I got it done, had to find a decrypted one, and extract it, then re insert and flash it piece by piece, radio, recovery, hboot, system... etc thanks for the replies, especially the imei/sn comment, forgot that was in the vars, made me check another post i made yesterday too :good:
THC Butterz said:
I tried to flash every att ruu I could find, but I got it done, had to find a decrypted one, and extract it, then re insert and flash it piece by piece, radio, recovery, hboot, system... etc thanks for the replies, especially the imei/sn comment, forgot that was in the vars, made me check another post i made yesterday too :good:
Click to expand...
Click to collapse
in all honesty, you should of just found the firmware matching the RUU you were trying to flash and flashed that first as you are s-off, you've pretty much done that just manually, glad you got it sorted though :good:
First of all I would like to explain myself for starting another topic with this title but my problem is pretty specific and I searched the web for this and haven't found a solution yet.
So this is how it goes. I have stock telstra rom on my device and seeing as telstra isn't so keen on updating it I converted my cid and mid to europe international (HTC__001), OS- *.**.401.11, flashed firmware and changed my build.prop to match. Once I did that I got a notification of an OTA for lollipop but once it starts, in recovery it says "/system/app/DocumentsUI.apk has unexpected contents" and red triangle with exclamation point shows so the installation is aborted. My question is how do I get OTA to work on my phone without losing all the data on it? Phone is s-off, rooted and unlocked but other then that I didn't change a thing, specially not that apk.
D:\OTA M7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *
(bootloader) imei: *
(bootloader) meid: *
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.060s
Click to expand...
Click to collapse
Edit: flashed stock odexed 6.09.401.12 rom and firmware and it's all good, updating right now.
-. typewrited .-
I downloaded a RUU to downgrade my HTC One dual sim from android 5.0.2 to 4.4.2, the RUU matches my CID - HTC__J15 but it doesn't match my model num, RUU model: PN0770000 mine is PN0771000
here's my fastboot getvar
Code:
C:\Users\HP\Desktop\fastboot\fastboot>fastboot get
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.19.3509.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.402.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4286mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
And don't mind the S-ON I just got the phone S-OFF but I used getvar before I did the process.
My main/most important question is, can I still flash that RUU after having S-OFF to downgrade? the RUU had x.xx.401.x version but my version is x.xx.402.x is it still gonna work? (I don't mind the difference, I just need the downgrade badly)
Also if the version number causes an error, please link me a RUU for my phone that's android 4.4.2 or 4.4.3.
Thanks in advance.
I ended up having this HTC RUU Mode screen with warning logos on the edges
I have HTC One 801n too and I want to un-root it and return it to the original rom can you please help me ?
I can't find my original rom I found out that I have to change my cid but to do that i need to s-off my htc first and to do it I have to download sunshine ( 25$) because my hboot is 1.61.
I need anyway to un-root it and return it to the original rom please
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA39TW906310
(bootloader) imei: 359405050143195
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.200s
Hossam.Ali said:
I have HTC One 801n too and I want to un-root it and return it to the original rom can you please help me ?
I can't find my original rom I found out that I have to change my cid but to do that i need to s-off my htc first and to do it I have to download sunshine ( 25$) because my hboot is 1.61.
I need anyway to un-root it and return it to the original rom please
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA39TW906310
(bootloader) imei: 359405050143195
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.200s
Click to expand...
Click to collapse
First of all don't include IMEI and Serialno when posting a fastboot getvar all. This RUU zip is the one you're looking for https://www.androidfilehost.com/?fid=95916177934554130
No need to change the cid as your matches the one in the RUU zip. Make sure to relock the bootloader because you are S-ON before you flash the RUU. Make sure to wipe data,cache,dalvik cache, and system from custom recovery before flashing ROM (this is recommended when flashing so do it)
To relock the boot loader run the following commands in fastboot
fastboot oem lock
fastboot reboot-bootloader
Go to this link http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 to take you to the thread were I got the link for the RUU zip so you can rest a sure that the zip file is legit. Also this thread will show you how to flash the file.
Ask any questions if unsure of any procedure.