Related
I have a Sprint HTC Hero which until yesterday had never been rooted. Software version was 2.31.651.7. I'm trying to install CM6 using these instructions.
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Sprint_Hero_with_Android_2.1
I have rolled it back to 2.27.651.5, as suggested in the above article and I used the universal root method, which seems to have worked. Then when I started the Flashing Radio step I realized that they left out how to install a custom recovery image. I searched and found these instructions:
http://forum.xda-developers.com/showpost.php?p=4898505
After figuring out what adb and fastboot are, I was able to run 'adb devices' which shows:
List of devices attached
HT99RHF03843 device
I then ran 'adb shell reboot bootloader' which gave me the screen with the three androids riding skateboards. Info from that screen:
HERC XC SHIP S-ON
HBOOT-1.47.0000 (HERO20000)
MICORP-0110
TOUCH PANEL-SYN0104
RADIO-2.42.01.04.27
Mar 1 2010,16:02:39
When I try to run 'fastboot boot recovery-RA-heroc-v1.6.2.img' I get:
downloading 'boot.img'... FAILED (remote: not allow)
This is were I'm stuck. 'fastboot devices' shows:
HT99RHF03843 fastboot
I've tried searching and most of what I found is over a year old and says something about a perfect SPL, but I gotta believe there is some way around this. I do believe the root worked because I can do an 'adb shell' then 'su' and I get the # prompt. If I can't get a custom image on I'm just going to buy a new phone so I'm willing to risk bricking the phone to get this to work. If anyone knows a way around this I would greatly appreciate some assistance. Thanks.
-Iz-
1. I think you have the latest radio - might not need to flash a new one.
2. About flashing recovery, it's pretty easy -
a. Download the recovery image you want and put it on the SD card (not in any folder)
b. Goto ADB shell and run following commands:
- "flash_image recovery </sdcard/image name>" without quotes and "<>" - replacing image name with the actual file name with extension that you saved to the SD card
- reboot recovery
I am assuming once rooted, you can get to adb shell from your computer.
Let me know if you have further questions.
Thanks for the suggestion here is where I'm at now.
adb shell puts me at the $ prompt, when I type 'flash_image recovery recovery-RA-heroc-v1.6.2.img' from there I get 'flash_image: permission denied'. I also get that if I type gibberish for example if I type 'djherjn' i get 'djherjn: permission denied'. If I use 'su' to get to a # prompt, then run the command I get 'flash_image: not found', If I type gibberish at the # prompt I get 'djherjn: not found'. So it looks like it does not recognize the command flash_image. I checked path using 'echo $PATH' on both prompts it returns '/sbin:/system/sbin:/system/bin:/system/xbin'. Odd thing is there is no /system/sbin directory and flash_image is not located in any other directory. I'm starting to think the phone isn't really rooted. But when I run the universal root again it says phone is already rooted.
You are missing some words on the flashing I think...try this instead.
Connect your USB from the phone to PC choose Charge only.
Now open up Command Prompt(CMD) and type adb shell. Then just to be safe type SU...if SuperUser asks for permission on your phone, give it permission. Should give a # sign instead of $.
Then type ---- flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
You forgot the /sdcard/ from what I read from your post.
With the device set to charge only, adb does not see it. I've been having to set it to HTC Sync, just tried again to make sure. I'm still getting 'flash_image: not found' when I type the command 'flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img' from the # prompt. I also tried 'cd sdcard' and then 'flash_image recovery recovery-RA-heroc-v1.6.2.img' still same error. 'ls sdcard' does show the image in that directory and I'm using copy and paste to avoid typos. I'm still thinking it is complaining that there is no flash_image command. I'm going to re-flash it with the HTC software and start over just in case I screwed something up.
I had the same problem.
Before you go ahead with flashing HTC software, try the ROM manager app from the market. You could flash the ClockWorkMod recovery from ROM manager.
If that does not work, don't waste any more time - go the RUU route (preferbaly using the 2.27.651.5 release) and root using: http://forum.xda-developers.com/showthread.php?t=694572.
I just went through a bunch of issues with recovery/backup/restore and such, so consider this fresh advice ;-).
izard said:
With the device set to charge only, adb does not see it. I've been having to set it to HTC Sync, just tried again to make sure. I'm still getting 'flash_image: not found' when I type the command 'flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img' from the # prompt. I also tried 'cd sdcard' and then 'flash_image recovery recovery-RA-heroc-v1.6.2.img' still same error. 'ls sdcard' does show the image in that directory and I'm using copy and paste to avoid typos. I'm still thinking it is complaining that there is no flash_image command. I'm going to re-flash it with the HTC software and start over just in case I screwed something up.
Click to expand...
Click to collapse
EDIT: Andy beat me to it!
If you want Amon-Ra you have to choose Flash Alternate Recovery.
Finally got it! I used the ROM manger app. I swear last night when I was considering it, I only saw the paid version. That was so much easier then what I was doing. Thanks everyone for your help. It is highly appreciated.
-Iz-
Ok so here it is almost day 2 trying to install CWM on zv8 after using "mt's easiest way to keep root thru zv8'. (Oh and by the way MT your the MAN). Now getting to zv8 was easy, But getting the recovery installed is another issue all together. First started with the AIO bat. file which installs cwm (kudos to MT and djrbliss). And it reads
"system cannot find the path specified'.
SO ok well apparently the computer isnt reading the phone found out the driver has issue shows the error message(on both my laptops).
ok lets try the terminal emulator with
brad6360 said:
1) Download the cwmrecovery.img to your SD. ( I downloaded MT's zip file and then extracted all with root explorer, but you only need the cwmrecovery.img file.)
2) Use root explorer to copy or move it to the /data/local/tmp directory (make sure permissions are set to r/w/exe).
3) Launch terminal emulator and type these commands:
su
mount -orw,remount /dev/block/system /system
mount -orw,remount /dev/block/data /data
dd if=/data/local/tmp/cwmrecovery.img of=/dev/block/mmcblk0p14 bs=4096
rm /data/local/tmp/* 2>/dev/null
4) exit terminal emulator and then reboot.
You can then try the vol down+power button combo upon boot to enter CWM.
Good luck.
Click to expand...
Click to collapse
didn't work and I the local.prop file in the data folder.
Someone PLEASE HELP!!!
(not a noob or expert but I can read and follow directions lol)
Are you sure you still have root level access?
Does adb detect your phone at all?
Still have root access I used root explorer to add the local.prop.
Adb recognizes my phone it shows a serial number under adb devices
Is there a way I can flash cwm in adb?
Sent from my VS910 4G using XDA
Use the newest aio from Mt. It worked for me. The simplest way is to flash the v7.tot then 'JUST' root, create the local.prop file, then ota to v8. Then continue on with Mt's aio to install cwm. Don't worry about having complete root access (cuz I didn't, but had cwm). Flashed broken out and haven't looked back.
--My REVO is Broken, tweaked, SC'd, and TB'd. Just awesome!
Thats where I'm stuck. I'm on zv8, using mt's easiest AIO to update from zv7. The AIO for cwm isn't installing nor through the terminal emulator. Any other suggestions?
Sent from my VS910 4G using XDA
What happens when you go into recovery? Is it the stock recovery? Stock v8 didn't have the option to boot into recovery. Just a thought. When I did it I got a lot of errors, but it took.
--My REVO is Broken, tweaked, SC'd, and TB'd. Just awesome!
mrand1 said:
Thats where I'm stuck. I'm on zv8, using mt's easiest AIO to update from zv7. The AIO for cwm isn't installing nor through the terminal emulator. Any other suggestions?
Sent from my VS910 4G using XDA
Click to expand...
Click to collapse
I have the same problem, Even when i Flash zv7 tot and try old AIO it says
Cannot find specified path
and i am not a noob and have broken out an old revo with mt's help but this new one with pre loaded zv8...No luck yet
had to manually push
I'm glad that I'm not the only one having this issue
Can you use Root Explorer to check and make sure adb is pushing the image file to your phone? Look in this directory: /data/local/tmp/cwmrecovery.img
You could always do this manually using adb. Here's how.
1. Open the ZV8CWMRecovery folder on your PC.
2. Double click the 'Files' folder to go into that directory.
3. Highlight/select and copy the address of your current folder location on your PC. It will look something like this:
Code:
C:\Documents and Settings\username\My Documents\Downloads\ZV8CWMRecovery\Files
4. Click Start>Run>type 'cmd' and hit enter/return to open your command prompt.
5. Type 'cd', hit your spacebar, then paste your address which you copied in step 3 into your command prompt, hit enter/return.
6. You should now be positioned in the folder containing the adb and CWMRecovery files.
7. Type the following to copy the CWMRecovery image to your phone:
Code:
adb devices
adb remount
adb push cwmrecovery.img /data/local/tmp/cwmrecovery.img
adb shell dd if=/data/local/tmp/cwmrecovery.img of=/dev/block/mmcblk0p14 bs=4096
adb shell "rm /data/local/tmp/* 2>/dev/null"
adb shell rm /system/etc/install-recovery.sh
adb shell rm /system/recovery-from-boot.p
adb shell rm /data/local.prop
adb reboot
Phone should reboot. Try and boot into CWMRecovery after it reboots.
idk if I'm not doing something right or wrong. I have usb debugging and internet connection, and I'm getting "remount failed: operation not permitted".
I had the same issue but following these instructions helped me, what finally helped me was typing a wrong command wich gave me a help menu with all the commands, the important one being "adb reboot [Recovery:Bootlaoder]"
adb reboot recovery did the trick, then wiped flashed broken out and sooo happy to be done with it.
after pushing CWM in command prompt of course
I'm also getting "remount failed: operation not permitted" when trying adb remount in the command prompt just as mrand1 apparently did.
I (perhaps noobishly) skipped that step and did adb push cwmrecovery.img /data/local/tmp/cwmrecovery.img but after trying the next step got cannot open for write: Permission denied.
I'm trying to get back to Broken Out 1.1 - when it first came out I successfully downgraded to zv7 by flashing the .tot and then doing the OTA update, but now when I try to do that I can't seem to get the OTA to start downloading. I flashed zv8 tot in order to test the latest root method (which works) I just can't get CWM on there now - I don't seem to have any recovery at all actually. Any help would be appreciated.
slimzim said:
I'm also getting "remount failed: operation not permitted" when trying adb remount in the command prompt just as mrand1 apparently did.
I (perhaps noobishly) skipped that step and did adb push cwmrecovery.img /data/local/tmp/cwmrecovery.img but after trying the next step got cannot open for write: Permission denied.
I'm trying to get back to Broken Out 1.1 - when it first came out I successfully downgraded to zv7 by flashing the .tot and then doing the OTA update, but now when I try to do that I can't seem to get the OTA to start downloading. I flashed zv8 tot in order to test the latest root method (which works) I just can't get CWM on there now - I don't seem to have any recovery at all actually. Any help would be appreciated.
Click to expand...
Click to collapse
I did the same thing, flashed to zv8 tot, was able to root but was unable to flash cwm recovery. I tried manually doing it and running MT's AIO. It's telling me permission denied on all of the steps except the push cwmrecovery.img. It appears I do not have any recovery either. Trying to get to Broken Out! Any help is appreciated, thanks guys!
asauber said:
I tried ... running MT's AIO. It's telling me permission denied on all of the steps except the push cwmrecovery.img.
Click to expand...
Click to collapse
For what it's worth I also tried that with the same results.
I finally got this to work much more easily thanks to a quick talk with mtmichaelson. Here's the method:
1) Get to ZV8 (I got there via LGNPST)
2) Root using the tool found here: http://forum.xda-developers.com/showthread.php?t=1621625
3) Open a Terminal Emulator
4) Type: su
5) Hit enter
6) Type: echo 'ro.kernel.qemu=1' > /data/local.prop
7) Press enter
8) Reboot
9) Use the ZV8CWMRecovery.bat found here: http://forum.xda-developers.com/showthread.php?t=1583023
Good luck!
slimzim said:
I finally got this to work much more easily thanks to a quick talk with mtmichaelson. Here's the method:
1) Get to ZV8 (I got there via LGNPST)
2) Root using the tool found here: http://forum.xda-developers.com/showthread.php?t=1621625
3) Open a Terminal Emulator
4) Type: su
5) Hit enter
6) Type: echo 'ro.kernel.qemu=1' > /data/local.prop
7) Press enter
8) Reboot
9) Use the ZV8CWMRecovery.bat found here: http://forum.xda-developers.com/showthread.php?t=1583023
Good luck!
Click to expand...
Click to collapse
Man, that was too easy!
Thanks for posting this slimzim. This worked straight away for me, I'm installing Broken Out as I type! I'm actually a little glad this happened because now I'm a little more familiar with terminal emulator and what local.prop does. Never had to use it in the past. This is exactly the second phone I've ever rooted and am usually able to just use AIOs.
And of course, thanks to mtmichaelson for chatting with you about it and doing all the hard work in the first place!
slimzim said:
I finally got this to work much more easily thanks to a quick talk with mtmichaelson. Here's the method:
1) Get to ZV8 (I got there via LGNPST)
2) Root using the tool found here: http://forum.xda-developers.com/showthread.php?t=1621625
3) Open a Terminal Emulator
4) Type: su
5) Hit enter
6) Type: echo 'ro.kernel.qemu=1' > /data/local.prop
7) Press enter
8) Reboot
9) Use the ZV8CWMRecovery.bat found here: http://forum.xda-developers.com/showthread.php?t=1583023
Good luck!
Click to expand...
Click to collapse
So far not working...repeating process now...
da_morales said:
So far not working...repeating process now...
Click to expand...
Click to collapse
If you've done all steps exactly it should work. I went through a ton of other "fixes" that didn't work, I believe the key here is when you use the terminal emulator directly on the phone to create local.prop. I was trying to create local.prop in every way but that, and until I did it directly on the phone did I have success.
Good luck!
local.prop missing
I used the Easy ZV8 All in One Rooting Tool, and have no sound at all like a couple of other users. One of the suggestions was to rename the local.prop file in the /data folder to local.prop.bak.
I assume this is the /data folder in the internal folder? When I did the steps for the all in one rooting tool (coming from rooted zv7), there is no local.prop file in my /data folder to rename, yet I still have no audio for ringtones, phone calls, etc. except for the boot up sound on the splash page.
Any ideas why my local.prop file isn't even there? I even tried copying the one from the mtmichelson zip file into there, still no avail. Thanks!
I have the same issue. I used the echo command in term emulator and the local.prop file was there. rebooted and the file is gone. I have root but cannot install cw recovery. I have tried AIO, adb, and terminal emulator but nothing makes it stick. Any help would be greatly appreciated
Rob
I realize that these threads are every where but re posting in hopes of helping someone out. Every bit of mt's AIO worked for me, but AIO 2 for Zv8 would not.
You could always do this manually using adb. Here's how.
Push CWM Recovery image to your phone manually once in rooted zv8.
1. Open the ZV8CWMRecovery folder on your PC.
2. Double click the 'Files' folder to go into that directory.
3. Highlight/select and copy the address of your current folder location on your PC. It will look something like this:
Code:
C:\Documents and Settings\username\My Documents\Downloads\ZV8CWMRecovery\Files
4. Click Start>Run>type 'cmd' and hit enter/return to open your command prompt.
5. Type 'cd', hit your spacebar, then paste your address which you copied in step 3 into your command prompt, hit enter/return.
6. You should now be positioned in the folder containing the adb and CWMRecovery files.
7. Type the following to copy the CWMRecovery image to your phone:
Code:
adb devices
adb remount
adb push cwmrecovery.img /data/local/tmp/cwmrecovery.img
adb shell dd if=/data/local/tmp/cwmrecovery.img of=/dev/block/mmcblk0p14 bs=4096
adb shell "rm /data/local/tmp/* 2>/dev/null"
adb shell rm /system/etc/install-recovery.sh
adb shell rm /system/recovery-from-boot.p
adb shell rm /data/local.prop
adb reboot
Phone should reboot. Try and boot into CWMRecovery after it reboots.
you can do that by typing: adb reboot recovery
all thanks go to brad 6360 for lending a hand and general lack of DoucheBaggery!
You're welcome. Glad I could help.
I'm stuck on adb remount cmd. Here's the output I get:
adb remount
remount failed: Operation not permitted
Any ideas? This is the same place I had issues running the AIO .bat file. Any help would be greatly appreciated!
JMink said:
I'm stuck on adb remount cmd. Here's the output I get:
adb remount
remount failed: Operation not permitted
Any ideas? This is the same place I had issues running the AIO .bat file. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Make sure you have internet connection and usb debugging enabled.
JMink said:
I'm stuck on adb remount cmd. Here's the output I get:
adb remount
remount failed: Operation not permitted
Any ideas? This is the same place I had issues running the AIO .bat file. Any help would be greatly appreciated!
Click to expand...
Click to collapse
I was having the same problems. No matter what I tried, AIO, this method, etc, nothing worked when I was using my computer to get CWM back after ZV8. I found this thread that uses terminal emulator on the phone and it worked perfectly.
http://forum.xda-developers.com/showthread.php?t=1594885
I never could get cwm working but a friend recommended QuickBoot, gives you the boot into recovery mode. Works great.
Sent from my VS910 4G using xda premium
This is the same thing as terminal emulater on your phone
with this you can open a shell inside your phone running on your pc
Same commands
Thanks for the suggestions. I ended up getting it to work. I just skipped the adb remount cmd and started with pushing the img. Then I used the su cmd in shell to get a # prompt and ran the rest of the cmds as written including reboot recovery. CWM popped up on boot!
Sent from my Revo 4g using XDA Premium App
Hoping someone can help
Hey all. Last night I was helping a friend keep root through the V8 update. Everything went fine until I thought that I had manually pushed clockwork, but when I tried to reboot into recovery I got stuck on the LG logo forever. How I'm having trouble getting the phone to do anything. When in emergency mode it won't connect to the computer and it's not even my phone so I feel like a real #$%^^. Any advice would be appreciated.
Edit: http://forum.xda-developers.com/showthread.php?t=1564941 allow me to answer my own question
I WROTE THE FOLLOWING WHILE TRYING TO TROUBLESHOOT/DOCUMENT MY OWN STEPS BUT I HAVE FOUND A SOLUTION. I HAVE POSTED THIS IN CASE SOMEONE ELSE MAY FIND THE INFORMATION USEFUL.
Is that appropriate? Move/delete this if you see fit.
I have an AT&T Moto X running 4.2.2 rooted with PwnMyMoto. Since it is with ATT, it has a locked bootloader.
[PROBLEM]
After putting a custom bootanimation.zip in the /system/media directory, device boots/"works" but display is black.
[HOW IT HAPPENED]
Using ES File Explorer, I turned on the /system r/w, copied the bootanimation.zip from the (internal) sdcard, and then overwrote the original boot animation (I do have a backup).
However, after booting the phone now, there is only a black screen. It seems to be working, there's just nothing displayed.
[WHAT I CAN DO/HAVE DONE]
ADB debugging has already been enabled
ADB shell has already been granted superuser permissions (Using SuperSU, unsure if solution works if this hasn't been done?)
It vibrates sometimes as though I have an email, notification, or whatever
I can access storage with usb cable,
adb get-state returns device,
I CAN get into fastboot (screen displays normally here), however PwnMyMoto overwrites recovery,
when rebooting the phone, the motorola power down animation is displayed
I tried to put back the original with
adb push bootanimation.zip /system/media
but get 'permission denied' (you may be able to use method this on a different device/carrier/ROM)
adb shell getprop ro.boot.write_protect returns 0
in adb shell
mv /sdcard/download/bootanimation.zip /system/media/ returns failed - cross-device link (googled this, seems normal, but I'm unsure how else to copy it back)
su
mount -o remount,rw /system
doesn't return anything but I am unsure where to go from there.
cannot run adb as root, as the phone is not a dev model
[RELATED POSTS]
http://forum.xda-developers.com/showthread.php?t=2249659
[HOW I FIXED IT]
start adb
ensure that 'adb shell getprop ro.boot.write_protect' returns 0 (if not, reboot into recovery)
start phone in recovery mode with
adb reboot recovery
then
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw /system (not sure which one of these ended up being 'correct' but it didn't hurt to do both)
cp /sdcard/download/bootanimation.zip /system/media/ (copy <src> <dest>, src is wherever the backup zip is located, if you are unsure of where the files are, use the 'ls' command to navigate the directories)
adb reboot
After doing this, the screen started displaying as normal.
Apologies for the lack of technicality, not much a dev myself. Just glad to have it working again.
help
oc83 said:
I WROTE THE FOLLOWING WHILE TRYING TO TROUBLESHOOT/DOCUMENT MY OWN STEPS BUT I HAVE FOUND A SOLUTION. I HAVE POSTED THIS IN CASE SOMEONE ELSE MAY FIND THE INFORMATION USEFUL.
Is that appropriate? Move/delete this if you see fit.
I have an AT&T Moto X running 4.2.2 rooted with PwnMyMoto. Since it is with ATT, it has a locked bootloader.
[PROBLEM]
After putting a custom bootanimation.zip in the /system/media directory, device boots/"works" but display is black.
[HOW IT HAPPENED]
Using ES File Explorer, I turned on the /system r/w, copied the bootanimation.zip from the (internal) sdcard, and then overwrote the original boot animation (I do have a backup).
However, after booting the phone now, there is only a black screen. It seems to be working, there's just nothing displayed.
[WHAT I CAN DO/HAVE DONE]
ADB debugging has already been enabled
ADB shell has already been granted superuser permissions (Using SuperSU, unsure if solution works if this hasn't been done?)
It vibrates sometimes as though I have an email, notification, or whatever
I can access storage with usb cable,
adb get-state returns device,
I CAN get into fastboot (screen displays normally here), however PwnMyMoto overwrites recovery,
when rebooting the phone, the motorola power down animation is displayed
I tried to put back the original with
adb push bootanimation.zip /system/media
but get 'permission denied' (you may be able to use method this on a different device/carrier/ROM)
adb shell getprop ro.boot.write_protect returns 0
in adb shell
mv /sdcard/download/bootanimation.zip /system/media/ returns failed - cross-device link (googled this, seems normal, but I'm unsure how else to copy it back)
su
mount -o remount,rw /system
doesn't return anything but I am unsure where to go from there.
cannot run adb as root, as the phone is not a dev model
[RELATED POSTS]
http://forum.xda-developers.com/showthread.php?t=2249659
[HOW I FIXED IT]
start adb
ensure that 'adb shell getprop ro.boot.write_protect' returns 0 (if not, reboot into recovery)
start phone in recovery mode with
adb reboot recovery
then
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw /system (not sure which one of these ended up being 'correct' but it didn't hurt to do both)
cp /sdcard/download/bootanimation.zip /system/media/ (copy <src> <dest>, src is wherever the backup zip is located, if you are unsure of where the files are, use the 'ls' command to navigate the directories)
adb reboot
After doing this, the screen started displaying as normal.
Apologies for the lack of technicality, not much a dev myself. Just glad to have it working again.
Click to expand...
Click to collapse
I had the same problem and i want a simple way to fix. any help?
iamgothamshero said:
I had the same problem and i want a simple way to fix. any help?
Click to expand...
Click to collapse
I wrote down the steps I took to fix it at the end of the post. You'll have to restore the old boot animation file with ADB. Hopefully, ADB shell was already given root permissions on your phone, otherwise I'd be unsure of how to fix it.
reply to u
oc83 said:
I wrote down the steps I took to fix it at the end of the post. You'll have to restore the old boot animation file with ADB. Hopefully, ADB shell was already given root permissions on your phone, otherwise I'd be unsure of how to fix it.
Click to expand...
Click to collapse
In the how i fixed it section, idk how to do those things. i have sdk manager on pc. please i am freaked out. can u give me simple instructions. Thank you so much
iamgothamshero said:
In the how i fixed it section, idk how to do those things. i have sdk manager on pc. please i am freaked out. can u give me simple instructions. Thank you so much
Click to expand...
Click to collapse
If you're unsure how to start ADB, I'd think that you've never used it before, and in that case I'd be entirely unsure if that method would work.
That said, you should find adb.exe in the sdk/platform-tools folder. If you shift+right-click this folder you can quickly open a command prompt there to start using the commands (each line in the instructions is a separate command). If you're unsure how exactly to use adb, I'm sure there are youtube videos or other forum posts documenting the basics (try searching for beginner's guide to adb on xda).
YES!!!
oc83 said:
If you're unsure how to start ADB, I'd think that you've never used it before, and in that case I'd be entirely unsure if that method would work.
That said, you should find adb.exe in the sdk/platform-tools folder. If you shift+right-click this folder you can quickly open a command prompt there to start using the commands (each line in the instructions is a separate command). If you're unsure how exactly to use adb, I'm sure there are youtube videos or other forum posts documenting the basics (try searching for beginner's guide to adb on xda).
Click to expand...
Click to collapse
I just downloaded random bootanimation zip, followed ur process, and it worked!!!!!!!!!!!!!!!!!!!!!!! omg so happy!!! thanks so much!!!!!!
---------- Post added at 11:49 PM ---------- Previous post was at 11:23 PM ----------
oc83 said:
If you're unsure how to start ADB, I'd think that you've never used it before, and in that case I'd be entirely unsure if that method would work.
That said, you should find adb.exe in the sdk/platform-tools folder. If you shift+right-click this folder you can quickly open a command prompt there to start using the commands (each line in the instructions is a separate command). If you're unsure how exactly to use adb, I'm sure there are youtube videos or other forum posts documenting the basics (try searching for beginner's guide to adb on xda).
Click to expand...
Click to collapse
It worked the first time then next reboot it shows black screen but i know it hasnt booted cause no sounds. and when i turn tablet sideways it doesnt show half of a screen. (it did that last time the screen was black).
Hi guys, I would really appreciate some help. I am able to root my gear and transfer the TWRP via odin. But when I reboot into recovery it just goes back to the stock launcher. I read this in the developer thread:
IF YOU FIND THE RECOVERY IS NOT STICKING & YOUR GEAR WIPES WHEN ATTEMPTING TO ACCESS RECOVERY AFTER FLASHING.
YOU MUST ROOT YOUR GEAR PRIOR TO INSTALLING TWRP AGIAN & RUN THE FOLLOWING COMMANDS IN ADB.
*NOTE* YOU WILL HAVE TO ACCEPT A SUPERUSER REQUEST POPUP WHEN EXECUTING "SU" COMMAND.
*NOTE 2* PROBABLY A GOOD IDEA TO RUN THIS PRIOR TO FIRST INSTALLATION, TO SAVE TIME.
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
IF YOU DELETE THE "RECOVERY-FROM-BOOT.P" FILE YOU MUST RELFASH TWRP RECOVERY.
I have rooted and installed roms on phone before but working in the developer tools is new to me. Can anyone explain exactly how and when to do this during the TWRP recovery install process? Or possibly just point me to a how to or youtube on basic adb commands? I have searched and it looks super complicated. Just need to know how to run these 3 commands.
THANKS!
i have the exact same issue, is there any answer for this??
Wettpassat said:
Hi guys, I would really appreciate some help. I am able to root my gear and transfer the TWRP via odin. But when I reboot into recovery it just goes back to the stock launcher. I read this in the developer thread:
IF YOU FIND THE RECOVERY IS NOT STICKING & YOUR GEAR WIPES WHEN ATTEMPTING TO ACCESS RECOVERY AFTER FLASHING.
YOU MUST ROOT YOUR GEAR PRIOR TO INSTALLING TWRP AGIAN & RUN THE FOLLOWING COMMANDS IN ADB.
*NOTE* YOU WILL HAVE TO ACCEPT A SUPERUSER REQUEST POPUP WHEN EXECUTING "SU" COMMAND.
*NOTE 2* PROBABLY A GOOD IDEA TO RUN THIS PRIOR TO FIRST INSTALLATION, TO SAVE TIME.
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
IF YOU DELETE THE "RECOVERY-FROM-BOOT.P" FILE YOU MUST RELFASH TWRP RECOVERY.
I have rooted and installed roms on phone before but working in the developer tools is new to me. Can anyone explain exactly how and when to do this during the TWRP recovery install process? Or possibly just point me to a how to or youtube on basic adb commands? I have searched and it looks super complicated. Just need to know how to run these 3 commands.
THANKS!
Click to expand...
Click to collapse
i have the exact same issue, is there any answer for this??
Well it's been well over a year since I did that but let's see if I can help..... Before I start I'm hoping you've already enabled adb debugging on the gear and downloaded adb onto your computer. I believe you run the commands after you've run cygnia but before you flash twrp. You run the task from a command prompt from your pc. I'm pretty sure you don't include the $ or #. Before you start try the adb command- adb devices from the command prompt on your pc. That'll let you know if the gear is connected. I remember being a bit intimidated by it all as it was different to any other flash I'd done. In reflection it's very easy, type the line in a command prompt, press enter, wait for the cursor to come up again, type the next line. As for guides..... I can't remember which one I used but there's plenty out there.