Related
Hi Guys !! :highfive:
How to record call in my galaxy note? it's GT N7000.
Fully Rooted !!
Baseband Version: XXLSO
Build Number: XXLSZ
This is what i get with call recorder app
They asked to install libs.But can't install libs giving an error !!
How can i fix this? :good:
try with xposed framework and xposed tweakbox module
nokiamodeln91 said:
try with xposed framework and xposed tweakbox module
Click to expand...
Click to collapse
I'm noob can you explain bit for me thank you !! :good::good: :highfive:
there is a guide
http://forum.xda-developers.com/showthread.php?t=2158652
nokiamodeln91 said:
there is a guide
http://forum.xda-developers.com/showthread.php?t=2158652
Click to expand...
Click to collapse
HI, there are no other way to get call recording? its too dificult the method of this post. i´m a certanly noob too and cant
follow the instructions.
By the way, isnt for note ii??
Regards...
so this will record only incoming calls or both 2 sides?
Clode said:
HI, there are no other way to get call recording? its too dificult the method of this post. i´m a certanly noob too and cant
follow the instructions.
By the way, isnt for note ii??
Regards...
Click to expand...
Click to collapse
This is easiest way i think
Just read again, you need to download 2 apk files just.
1.framwork
2.call recording module
Describing in short
1.Install framwork and open application and you have to select install option again from in side application
Reboot
2.Install module
you will get notification regarding activation of module - activate
Reboot
Done, you will find option to record call while on call
It will work on note1 too.
Sweet Smile said:
so this will record only incoming calls or both 2 sides?
Click to expand...
Click to collapse
Yes
dr.ketan said:
This is easiest way i think
Just read again, you need to download 2 apk files just.
1.framwork
2.call recording module
Describing in short
1.Install framwork and open application and you have to select install option again from in side application
Reboot
2.Install module
you will get notification regarding activation of module - activate
Reboot
Done, you will find option to record call while on call
It will work on note1 too.
Yes
Click to expand...
Click to collapse
Ok thanks for the replay, but i found an add on to call recording and works ok..
Thanks again!
It's fine but one advantage of xposed is, it is not rom dependent and should work on almost all ics and jb rom so you will have not to worry for call recording while changing rom.
Sent from my GT-N7100 using xda premium
dr.ketan said:
It's fine but one advantage of xposed is, it is not rom dependent and should work on almost all ics and jb rom so you will have not to worry for call recording while changing rom.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Hi dr. Ketan
Can i use xposed on stock jb JPLSB
Thank you
Sent from my GT-N7000 using Tapatalk 2
It should work on any ics or JB
I have used on note1, note2,s3,s2 on various rom
Sent from my GT-N7100 using xda premium
dr.ketan said:
It's fine but one advantage of xposed is, it is not rom dependent and should work on almost all ics and jb rom so you will have not to worry for call recording while changing rom.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Perfect!, its understand. thanks for the replay...
dr.ketan said:
This is easiest way i think
Just read again, you need to download 2 apk files just.
1.framwork
2.call recording module
Describing in short
1.Install framwork and open application and you have to select install option again from in side application
Reboot
2.Install module
you will get notification regarding activation of module - activate
Reboot
Done, you will find option to record call while on call
It will work on note1 too.
Yes
Click to expand...
Click to collapse
Thank you Ketan :good::good:
Sweet Smile said:
I'm noob can you explain bit for me thank you !! :good::good: :highfive:
Click to expand...
Click to collapse
Look stuff up on google. Don't be lazy. It really annoys pple
Sent from BOX13.
What on earth is it on about?
I installed both xposed and the tweaks module. The module is telling me:
Call recording will only work if you have special versions of "hw/audio_policy.exynos4.so" and "hw/audio.primary.exynos4.so"
Which is like, really really helpful and specific. Not.
That and my record button is greyed out during calls.
I'm using a Galaxy Note N7000, 4.1.2, JZO54K.N7000XXLSZ
Any ideas? Thanks in advance.
joelthomastr said:
I installed both xposed and the tweaks module. The module is telling me:
Call recording will only work if you have special versions of "hw/audio_policy.exynos4.so" and "hw/audio.primary.exynos4.so"
Which is like, really really helpful and specific. Not.
That and my record button is greyed out during calls.
I'm using a Galaxy Note N7000, 4.1.2, JZO54K.N7000XXLSZ
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
FYI if you go through the links mentioned in the thread for the xposed framework you will find other links in there, just read them carefully and you will find the special versions you are looking for. or you can try this:
http://forum.xda-developers.com/showpost.php?p=39599497&postcount=87
make a backup before trying as this is for DDLSC and if does not work just restore the backup.
Yes u can
Well, thanks, but...
treacherous_hawk said:
FYI if you go through the links mentioned in the thread for the xposed framework you will find other links in there, just read them carefully and you will find the special versions you are looking for. or you can try this:
http://forum.xda-developers.com/showpost.php?p=39599497&postcount=87
make a backup before trying as this is for DDLSC and if does not work just restore the backup.
Click to expand...
Click to collapse
Well, thanks, sort of. Could you possibly copy and paste me a link instead of telling me to hunt for it? Believe me I have tried otherwise I wouldn't have posted.
I've just now waded through this thread and another 6 pages of this thread (http://forum.xda-developers.com/showthread.php?t=2158652) again without finding any mention of exynos4.so files.
Uninstall existing recording module.
Look my signature and find N7100 all in one
Look post#8
You will find call recording mode there and working on 4.1.2
(that is note2 thread but xposed works on note1 too, modules remains same)
Sent from my GT-N7100 using xda premium
Hmm...
dr.ketan said:
Uninstall existing recording module.
Look my signature and find N7100 all in one
Look post#8
You will find call recording mode there and working on 4.1.2
(that is note2 thread but xposed works on note1 too, modules remains same)
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
OK so by the existing recording module do you mean Tweakbox? What do I do then?
I saw the N7100 all in one, and your post #8 where it's all working in 4.1.2. Unfortunately it's not working for me, so...
EDIT: Sorry sorry, it is working, it waits for the person to answer before it enables the button. Thanks for everybody's patience...
Now to find an app that will start recording automatically, I think I can find that one OK.
Hi people,
I hope this can help those who ask some common questions in all threads or just don't read the OP or the OP hasn't Q&A, so let's start.
Q: How to install/update Cyanogenmod roms?
A: Follow this tutorial.
Q: Where can I find Gapps?
A: Here, here, here or here. For light gapps go here.
Q: How to enable the developer options?
A: Settings>About phone> click 7 times on build number.
Q: How to enable advanced reboot?
A: Go to: System settings->Developer options->Advanced reboot.
Q: Advanced reboot doesn't work for me. Any solution?
A: Yes, take a look here (3 Button Combo).
Q: Where can I find the latest baseband for I8190, I8190N or I8190L?
A: Here.
Q: After installing CM rom I have no signal. Any solution?
A: Here (Pit file & Modem folder).
Q: What is the Panda application (CM10.2)?
A: It's for saving battery, it disable one core & sets the governor to ondemand.
Q: I have the "1Ghz bug", how to fix it?
A: Reboot the device with wifi off. If for some reason still doesn't work change the governor & the scheduler to Pegasusq + Sio or Deadline. You can also try this app, it will solve your problem permanently, for sure.
Q: How to enable softkeys haptic feedback?
A: Softkeys haptic feedback is disabled by default. You need to follow this tutorial to enable it.
Q: How to enable automatic brightness?
A: Download this app.
Q: After install CM11 my clock froze! Any solution?
A: Uninstall Lockclock.apk from system apps or try that:
- Keep the phone plugged on charger/pc
- Keep mobile data (3G/2G) on
- Keep wifi on
Q: How to disable the buttons backlight?
A: Go to system settings-buttons-backlight & uncheck "Illuminate buttons".
If don't work for you, download BLN control from Google Play Store, here.
Q: I installed CM10.1/CM10.2/CM11 rom but I can't find radio fm app. Any solution?
A: Yes. Download Spirit FM Free from here.
Do that only if it doesn't work with the default settings:
1 - If you are in Europe: Settings->Band->World... (Anyone).
2 - Settings->Audio->Method->Galaxy S3/Note/S2_ICS.
Q: How to enable the pie controls & navigation buttons?
A: First you need a file explorer, then add this line qemu.hw.mainkeys=0 to /system/build.prop & reboot the phone to activate the on screen buttons (Navigation Bar). Then go to Settings>System>Power menu>Expanded desktop & activate it & then you will see pie control in the Settings>System menu.
Q: I want to try other kernel, but I can't because of F2FS. What can I do?
A: Take a look here & here.
Q: How to keep Xposed Framework installed after update the rom?
A: Read this.
Q: Where can I find amazing themes for TWRP recovery?
A: Here, here & here.
Q: How can I help the development of any ROM?
A: Not with, "+1", "FC", "me too", "same bug here", blablabla. These comments are USELESS.
Q: So, how can I really help?
A: Simple. Remember doing this you're helping the developer & yourself, you're intelligent, so you understand what I'm saying, right!?!
Do that in the right ROM thread:
Phone model:
Baseband version:
ROM version:
Did you?
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using?
a task killer:
the kernel (boot.img) in the zip or other:
Settings/Performance settings (other than default):
What steps will reproduce the problem?
But the most important thing is this: attach a LOGCAT of the problem.
Q: Ok nice, but I’m noob & I don’t know how to LOGCAT, where can I learn?
A: Here, here or stop being lazy & search in XDA forums.
Battery Saving Tips: Here or you can take a look here & put an end to the problems with the battery
Special thanks to:Macław
Marcin1147
OliverG96
Benzonat0r
Tys0n
Diego-ch
Lupohirp
Tom3q
Mikereidis
Dariolob
Ppero196
Hasdroid
Ronin790
Cipher666
Eswarvf
Fred6681
Tenshi_xp
Scattoit
Rirozizo
Joelalmeidaptg
Mattiawhite
Modding.MyMind
SethPDA
TKruzze
Juliàcarax
Audiominimal
Aavvaallooss
Blackknightavalon
Ave_Hornet
XDA Developers
If you find relevant questions that should be here, just let me know & I'll add them to the FAQThanks for reading & hope this helps you in anyway
thanks dude!!thats sloved too much of my problams!!
very useful info! thanks!
i have a question:
Q: How to enable the developers?
A: Settings>About phone> click 7 times on build number.
Click to expand...
Click to collapse
what do you mean by enable developers? i've tried it on stock and nothing happens
daphr said:
very useful info! thanks!
i have a question:
what do you mean by enable developers? i've tried it on stock and nothing happens
Click to expand...
Click to collapse
First of all, thank you for reading. Regarding your question, it only works on cm roms.
Anytime! Imho, you've provided useful info which is worth to know if you're an owner of a custom I8190.
I've totally failed the topic at the 1st place here, but I've checked out this hidden menu after I've flashed Maclaw's CM 10.2 and it's really a must have option. Now I remember it again!
..but what I didn't knew was that in here, in dev options existed that function which I was always seeking for; the advanced reboot, which lets you decide what to boot. For example, the recovery.
This is a really nice thing to use on CM. It can save you a bit of time and your 3 button combo fingerprints
I would add this 'advanced reboot/boot to recovery' thingy to the FAQ. I find it interesting and useful :silly:
Thanks.
are maclaws roms compatible with gt-l8190L?
Sent from my GT-I8190L using xda app-developers app
cobolmx said:
are maclaws roms compatible with gt-l8190L?
Sent from my GT-I8190L using xda app-developers app
Click to expand...
Click to collapse
Yes.
mauam said:
Yes.
Click to expand...
Click to collapse
Thank you, ill try one this night
no 3g/2g
Hello, i just installed macclaws 4.3.1 with the last update from 20131120, i cant enable data plan , toggles dont work even if i turn on , did i something wrong?, some one can hep me?
*** FIXED i had to set manually the apns from my carrier ***
thanks for these awesome FAQs!
just a question though. Do any of you know how to disable that battery notification and sound on panda rom CM10.2?
Just a follow up question. is there a way that BLN will not stop led on keys when notification is not read yet?
trabeast said:
thanks for these awesome FAQs!
just a question though. Do any of you know how to disable that battery notification and sound on panda rom CM10.2?
Click to expand...
Click to collapse
trabeast said:
Just a follow up question. is there a way that BLN will not stop led on keys when notification is not read yet?
Click to expand...
Click to collapse
Thank you. For disable low battery sound & notf. I use this xposed module. Regarding the BLN, better you read the description on playstore.
Thanks man!!
Im dont quite get the bln control still. Can you please help me?
Sent from my GT-I8190 using xda app-developers app
trabeast said:
Thanks man!!
Im dont quite get the bln control still. Can you please help me?
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I don't understand you! Just download it from playstore.
Ive downloaded it already. But when I receive an sms my led buttons goes "on" and then after ten seconds it goes "off" i wanted it to be on until the nessage is read.
Sent from my GT-I8190 using xda app-developers app
trabeast said:
Ive downloaded it already. But when I receive an sms my led buttons goes "on" and then after ten seconds it goes "off" i wanted it to be on until the nessage is read.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I think bln only works on 3rd party sms apps, not work with cm sms built-in app. BTW, keeping the lights on till the sms is reading only sucks your battery
Ohh. Ok2 thanks for your help man. Appreciated it.
Sent from my GT-I8190 using xda app-developers app
Added another way to boot in recovery (3 button combo).
mauam said:
Special thanks to @eswarvf
Added another way to boot in recovery (3 button combo).
Click to expand...
Click to collapse
Dont thank me I think benzonator is the guy who desrves it ( he made it )
Hello xda users,
I think i know a method to solve the problem with "Invert" display on SXTX
Story:
Around 2-3 months ago when i bought my SXTX i started to flashing the phone with various ROMs till i tried the Sony Xperia T Rom on TX... i did smtg wrong and my phone's screen got invert 360 degree.
I tried to find a way to solve the problem, read the russian and english forums but nothing helped me. The phone was brand new with warranty so my last chance was the service center, thats why i accurately flashed back my phoe to all stock then send to market where i bought and i was lucky because they said that the phone is "Brack" therefore they send me a new phone!
After a long time, today im flashed my phone, root, cwm... then installed Xposed framework and i think i find a way to solve the previous problem with "Invert display".
How:
- You have SXTX!
1.You need to root the phone (SuperSU)... i know its a bit hard cause everything is invert but its possible (i did this a lot of times)
2. Install Xposed framework.
3. Go to Xposed framework, press Framework then install update. You need to get this:
4. Press reboot
5.Go again to Xposed, press Download and find "Gravity Box (JB)". Download it and install, then go back to main many of Xposed and press Modules and check the "Gravity Box", then go to Framework and reboot.
6. You have GravityBox. Start it from appdrawer and press "Display tweaks" and as you can see there is an option called "Allow all rotation" - check it!
7. The last step to rotate your phone in your hand to 360 degree!!! (Normal position)
I need testers! Hope there is no one!!!
My phone now have no this problem, no invert display so i cant test it, but im sure that it will work!!!
I can not test because I have a working Xperia T, but I doubt it would work.
The allow all rotations option allow the rotation to 180 degree (bloked by default). If your tx screen was inverted it looks like a gravity sensor problem.
Enviado desde mi LT30p mediante Tapatalk
dantefff said:
I can not test because I have a working Xperia T, but I doubt it would work.
The allow all rotations option allow the rotation to 180 degree (bloked by default). If your tx screen was inverted it looks like a gravity sensor problem.
Enviado desde mi LT30p mediante Tapatalk
Click to expand...
Click to collapse
no it is not sensor problem.... and i have fully working normal TX.... this problem ocure only on TX models...
This method allow all rotations.... if you test it on you phone you will get not just side rotation but upside down to.... i tried it today and i can use the phone upside down
Yes I know. I was trying to say exactly that (sorry for my poor english)
I thought the initial problem was a sensor problem. Whereas thank you for the information.
Enviado desde mi LT30p mediante Tapatalk
dantefff said:
Yes I know. I was trying to say exactly that (sorry for my poor english)
I thought the initial problem was a sensor problem. Whereas thank you for the information.
Enviado desde mi LT30p mediante Tapatalk
Click to expand...
Click to collapse
Hope this will help for smb!
Well done~I have heard of another way:
1.Flash any CM ROM
2.Add this line to build.prop
Code:
ro.sf.hwrotation=180
3.Reboot and see if it works...
updateing said:
Well done~I have heard of another way:
1.Flash any CM ROM
2.Add this line to build.prop
Code:
ro.sf.hwrotation=180
3.Reboot and see if it works...
Click to expand...
Click to collapse
Yeah, i know this method! But for this you need to Unlock the bootloader... and this working only with CM ROMs, if you do this it is not mean that if you flash back the stock Sony ROM it will be good, but it still be invert!
Good method, but need UB so waranty gone! and only CM using!
Midleo said:
Yeah, i know this method! But for this you need to Unlock the bootloader... and this working only with CM ROMs, if you do this it is not mean that if you flash back the stock Sony ROM it will be good, but it still be invert!
Good method, but need UB so waranty gone! and only CM using!
Click to expand...
Click to collapse
Yes it's only fit for CM.But if I met the problem,I'd choose CM11 because there is no warranty with my phone My phone is normal now and running OmniROM 4.4...
updateing said:
Yes it's only fit for CM.But if I met the problem,I'd choose CM11 because there is no warranty with my phone My phone is normal now and running OmniROM 4.4...
Click to expand...
Click to collapse
Yes, if no waranty its almost doesnt matter... CM11 i very good!
Method
There is a new method and it seems like work!!!
Need testers!
http://forum.xda-developers.com/showthread.php?p=49318662
Midleo said:
There is a new method and it seems like work!!!
Need testers!
http://forum.xda-developers.com/showthread.php?p=49318662
Click to expand...
Click to collapse
bro sorry for noob question,because i know nothing about kernels. can you please explain me how to do that above process.i dont understand which file directory it is and i even tried searching for the file in root explorer but i dint find it
Hey everyone!
I'm proud to present you guys a transparent google search bar for lollipop home launcher.
Originallly made for 4.4.x by user @pepitoff on this thread http://forum.xda-developers.com/showpost.php?p=55659793&postcount=442 user @juanpirulo has made a working version with my lollipop home apk so i'm sharing it with you guys (Screenshots attached)
Requirements
Stock 5.0.2 Rom (.690)
Deodexed
Root
I've only tested this on my device running those requirements, could work for others maybe?
Instructions (A wise man once said it's always good to make a nandroid backup before trying anything)
Navigate to system/app
Backup old home-release.apk then copy and replace it.
Set permissons to rw- r– r–
Clear data and cache of Xperia Home in app settings
Reboot
should work on odexed also. At least my room is odexed and have no problems. cheers
Nice work bro @Zeyn Karim.. Take a thanks from me..
Sent From My Xperia Z2
Nice work bro, btw how u center your clock? Xposed?
yuskhayru said:
Nice work bro, btw how u center your clock? Xposed?
Click to expand...
Click to collapse
Yeah that looks like gravity box to me he must have got xposed to work without bootloop and playstore problem I wanna know how he got 5 icons on the home menu in a row that makes me want this apk more
RJASSI21 said:
Yeah that looks like gravity box to me he must have got xposed to work without bootloop and playstore problem I wanna know how he got 5 icons on the home menu in a row that makes me want this apk more
Click to expand...
Click to collapse
Your absolutely right, it is gravity box, and the 5 row icons is by using gem xposed module
Zeyn Karim said:
Your absolutely right, it is gravity box, and the 5 row icons is by using gem xposed module
Click to expand...
Click to collapse
Wow I didnt know gem was compatible thanks for telling me but I cant use xposed I get both
eiter the errors I said above ?
RJASSI21 said:
Wow I didnt know gem was compatible thanks for telling me but I cant use xposed I get both
eiter the errors I said above
Click to expand...
Click to collapse
I't isn't a 100% working but the icon rows and size works! as for your other problem it is fixable but is a tedious process, you need to deodex your rom an have ric disabled to have xposed working without bootloop
Zeyn Karim said:
I't isn't a 100% working but the icon rows and size works! as for your other problem it is fixable but is a tedious process, you need to deodex your rom an have ric disabled to have xposed working without bootloop
Click to expand...
Click to collapse
Ok thanks will playstore work like this aswell?
RJASSI21 said:
Ok thanks will playstore work like this aswell?
Click to expand...
Click to collapse
Yes so far i haven't had any issues with playstore at all, just updated most of my apps through it on saturday
Zeyn Karim said:
Yes so far i haven't had any issues with playstore at all, just updated most of my apps through it on saturday
Click to expand...
Click to collapse
Ok thanks sorry for the off topic
Zeyn Karim said:
Yes so far i haven't had any issues with playstore at all, just updated most of my apps through it on saturday
Click to expand...
Click to collapse
Haha it's okay, Happy to help
Hi guys, can someone upload the default/stock home-release.apk for D6503 running .726.. Thank you guys.
Sent from my D6503 using XDA Free mobile app
Zeyn Karim said:
Haha it's okay, Happy to help
Click to expand...
Click to collapse
Nice work, bro! :good:
akosipolan said:
Hi guys, can someone upload the default/stock home-release.apk for D6503 running .726.. Thank you guys.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Hey unfortunately i don't have .726 installed.... but i've uploaded the default/stock home-release.apk for .690 incase it helps, it should still work, however if you really need the .726 launcher i'm sure someone else can help you
Zeyn Karim said:
Hey unfortunately i don't have .726 installed.... but i've uploaded the default/stock home-release.apk for .690 incase it helps, it should still work, however if you really need the .726 launcher i'm sure someone else can help you
Click to expand...
Click to collapse
Could you give me the code change and how to work for that. I need to change on my Z1 home-release, please.
Many Thanks.
tngoctu said:
Could you give me the code change and how to work for that. I need to change on my Z1 home-release, please.
Many Thanks.
Click to expand...
Click to collapse
Not sure what you mean? if you looking you build your own using a Z1 launcher have a look at this thread http://forum.xda-developers.com/cro...z3-apps-v1-t2867992/post60100718#post60100718
Zeyn Karim said:
Not sure what you mean? if you looking you build your own using a Z1 launcher have a look at this thread http://forum.xda-developers.com/cro...z3-apps-v1-t2867992/post60100718#post60100718
Click to expand...
Click to collapse
Yes, that's i mean. It's work perfectly.
Many Thanks.
.726 Original Home-release.apk from D6503
https://www.dropbox.com/s/o1ofaspgu644j5t/home-release.apk?dl=0
Thanks u
Great
Hey!
Here is a port the final edition of @niaboc79 eXistenZ ROM for Sony Xperia ZR .
All information about this ROM, features and etc you can read in the original thread.
What's new in v4.0.0?
Based on latest Sony's 5.1.1 10.7.A.0.228
Optmization of PhoneStatusBar setting observer.
Slim Recent panel can be activated without restarting systemUI.
Slim Recent card background color can be changed without restarting systemUI.
Add option for position date left-right of clock.
Make all 14 font variants available to Statusbar Clock.
Statusbar Clock font resizing.
Lockscreen Weather city name limited to 12 characters.
Add Gesture Anywhere settings.
Add App Side Bar settings.
Add Gesture Anywhere Quick Toggle.
Add App Side Bar Qucik Toggle.
New Quick settings types:
Bar
Panel
Hidded
Add back eXistenZ Battery and Stamina Icons.
Themed restart SystemUI app and removed it from Home launcher.
Xperia Z5 In Call UI.
New images used for Modern Custom header image (Thanks to ESPS).
Custom Header overlay with Xperia images removed from system/vendor/overlay (name changed to .bak).
Rewrote all Task Manager implentation code.
Add two states to the Task Manager button.
Add Carrier Label settings.
Add eXistenZ Logo settings.
Add latest Android M Home launcher (Thanks to jjwrongjj).
Add various Icon Packs(Thanks to jjwrongjj).
Add Frenchtranslations to settings.
Adapt various apps and framework to new eXistenZ themes.
Add new eXistenZ MIUI v7 theme.
Fixed various issues.
Removed stereo ouputs.
Many optimizations done inside code.
Download
eXistenZ Premium v4.0.0 (Mega): Click
eXistenZ Premium v4.0.0 (GoogleDrive): Click (Thanks to @sufoalmighty)
Installation
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Wipe Data / Factory Reset
Flash ROM.
Reboot
Enjoy
Can someone please upload this on Google drive??.
I'm getting connection breaks on mega
Sent from my C5502 using XDA Free mobile app
ralf_waldo said:
Can someone please upload this on Google drive??.
I'm getting connection breaks on mega
Sent from my C5502 using XDA Free mobile app
Click to expand...
Click to collapse
Same here. I have had large downloads stall on multiple occasions with Mega.
ralf_waldo said:
Can someone please upload this on Google drive??.
Click to expand...
Click to collapse
XenolithicYardZone said:
Same here. I have had large downloads stall on multiple occasions with Mega.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4mv1Vn_GjCZQTMyUlhYZ0Q1ZzQ/view?usp=sharing
ralf_waldo said:
Can someone please upload this on Google drive??.
I'm getting connection breaks on mega
Sent from my C5502 using XDA Free mobile app
Click to expand...
Click to collapse
Hi bro, is there any ways to bring the icons of status bar from this rom to another custom rom?
Sensor Bug
The call sensor which turns off the screen when you hold the phone over ears, remains ON even after disconnecting the call.
So, the problem is, if I move my hand over the sensor when the phone is lying flat on my table after disconnecting the call, the screen turns off and turns back on once the hand is moved to and away.
Can you provide solution to fix this bug?
Regards
Ralf
Hey, thanks a lot for your work.
Could someone post screenshots or are there no visual differences from the original rom.?
I have a wierd problem, my keyboard doesn't pop when I have to type anything and also the key doesn't work.
Please help me with how to fix this issue.
please screen shot my brother
.
Ptamigi said:
please screen shot my brother
.
Click to expand...
Click to collapse
Refer the same rom on Sony Xperia Z thread. It is same.
You can get the screens there.
Can anyone please help me, on my phone xperia ZR with eXistenZ Premium | 4.0.0 | FINAL, the back key and the keyboard doesn't work, when the device is rebooted it works for a while however while typing anything on any app it suddenly disappears and back key stops working as well.
Please help me I like this ROM very much and don't want to uninstall it. I also tried to reflash the ROM and its still the same.
Thank You in advance.
techie24 said:
Can anyone please help me, on my phone xperia ZR with eXistenZ Premium | 4.0.0 | FINAL, the back key and the keyboard doesn't work, when the device is rebooted it works for a while however while typing anything on any app it suddenly disappears and back key stops working as well.
Please help me I like this ROM very much and don't want to uninstall it. I also tried to reflash the ROM and its still the same.
Thank You in advance.
Click to expand...
Click to collapse
Do a fresh install, that is wipe data,cache and dalvik and then flash your rom.
Note: You will lose all your apps and data. But this should definitely fix your problem.
neildalal said:
Do a fresh install, that is wipe data,cache and dalvik and then flash your rom.
Note: You will lose all your apps and data. But this should definitely fix your problem.
Click to expand...
Click to collapse
Thanks Bro, I did and it worked..
awesome rom man...hatsoff:good::highfive:
A very wonderful port. Works perfectly.
Hi, I'm getting below error every now n then can anyone please help me if there's anything wrong?
is a great rom, it works perfectly, good job. Thanks.
I tested its rom but flashlight not works.
Please fix its
---------------------
Sorry my English language not good
Sent from my C6603 using Tapatalk
For Locked bootloader?
koolbk said:
For Locked bootloader?
Click to expand...
Click to collapse
I use it on my C5502 with locked bootloader and I have to say it is working great, no problems whatsoever ( I hope I didn't jinx myself ) .
And I have to say battery life for me is really great. I get 4 hours of screen-on-time and then little something which I never managed before.
So thank you dev.