HELP! Absolutely CANNOT boot into CWM - Galaxy S III Mini Q&A, Help & Troubleshooting

I followed everything via this guide http://forum.xda-developers.com/showthread.php?t=2147852 and successfully flashed CWM to my GT-I8190.
The problem arises when I attempt to boot into recovery mode. Every time I attempt it, I am taken to the stock android recovery screen and not CWM. I've tried different versions of Odin... the touch version of CWM.. using a different computer... all to no avail.
I even downloaded Rom Manager thru Google Play and attempted to flash/update CWM from there (as it said it was, indeed, installed on my phone) but it wouldn't let me reboot the phone into recovery from Rom Manager - I imagine because I am not rooted.
I'm attempting to root my phone and flashing CWM is the first step. Like I said, the flash was, indeed, successful but the problem is that it always takes me into stock recovery instead of CWM.
Thanks in advanced, guys!

try another custom recovery, for example this one.
Wait until Odin says "success" and then reboot into recovery via Vol+ Home and Power
m.

moonryder said:
try another custom recovery, for example this one.
Wait until Odin says "success" and then reboot into recovery via Vol+ Home and Power
m.
Click to expand...
Click to collapse
Thanks! I downloaded the TWRP .zip file and extracted it only to find that there is no .tar file... only an image file... This won't work with Odin, will it?

AffectiveEffect said:
Thanks! I downloaded the TWRP .zip file and extracted it only to find that there is no .tar file... only an image file... This won't work with Odin, will it?
Click to expand...
Click to collapse
This zip file is a flashable zip for custom recoveries here for odin : http://get.novafusion.pl/?id=863
Good luck!
Sent from my SM-G900 using xda-developers app

xXPR0T0TYPEXx said:
This zip file is a flashable zip for custom recoveries here for odin : http://get.novafusion.pl/?id=863
Good luck!
Sent from my SM-G900 using xda-developers app
Click to expand...
Click to collapse
Thanks, guys! I'll post back with my results.

Same deal, xXPR0T0TYPEXx... I extract the .zip to find merely an image file.. I tried it with Odin anyway but Odin will not recognize it.
Hmmmmm.... I may have to go with vROOT if you tell me it's safe to use.

Another way of root is by flashing unsecure kernel. You can do it easily by Android Toolkit.

AffectiveEffect said:
Same deal, xXPR0T0TYPEXx... I extract the .zip to find merely an image file.. I tried it with Odin anyway but Odin will not recognize it.
Hmmmmm.... I may have to go with vROOT if you tell me it's safe to use.
Click to expand...
Click to collapse
don´t extract it, just flash the .tar via odin

moonryder said:
don´t extract it, just flash the .tar via odin
Click to expand...
Click to collapse
The file that you download is a .zip file, not a .tar file.

Related

[Q] Odin failed - galaxy note

I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.

Bootloop after installing stock on top of CM9

Hi all,
I am trying install the stock rom P7310XXKJ4------2011 October----P7310XEUKJ4-----UK/Ireland on my P7310, via odin
It seems to be successful, and then reboots, but then gets stuck in a boot loop. I can access recovery mode and download mode. I have tried this twice, what am I doing wrong?
Thanks in advance
dejul said:
Hi all,
I am trying install the stock rom P7310XXKJ4------2011 October----P7310XEUKJ4-----UK/Ireland on my P7310, via odin
It seems to be successful, and then reboots, but then gets stuck in a boot loop. I can access recovery mode and download mode. I have tried this twice, what am I doing wrong?
Thanks in advance
Click to expand...
Click to collapse
Go to recovery and do a factory reset. This will delete everything but it should fix your problem.
Also check "F Reset Time" in Odin and repartition using a 512 pit file. This will avoid you some common errors.
sent using XDA app
dejul said:
Hi all,
I am trying install the stock rom P7310XXKJ4------2011 October----P7310XEUKJ4-----UK/Ireland on my P7310, via odin
It seems to be successful, and then reboots, but then gets stuck in a boot loop. I can access recovery mode and download mode. I have tried this twice, what am I doing wrong?
Thanks in advance
Click to expand...
Click to collapse
Make sure you wipe data/factory reset, clear cache and dalvik cache in recovery then flash this should work fine for you maybe even clear the cache's after flash too
Sent from my GT-I9100 using Tapatalk 2
Hijacking the thread to the same destination. I was throwing in the towel and about to start the exact same thread, but I'm sill stuck. After researching a bit and trying a couple of things, I seem to be making things worse, so I thought I'd bite the bullet and ask for help while I still can use Odin.
I had also tried to install stock over CM9 and ended up in a bootloop with the blue CM9 guy showing. If fact, I couldn't even shut the tab off, it would power on and re-bootloop. I could get into recovery or Odin mode. I did a factory reset, didn't help. Installing from recovery wouldn't work, as I didn't have anything left on it to install. I researched and the thread with the stock firmware says "Extract tar file from the ROM(remember to extract it till .tar or tar.md5, dont go deep).". When I use 7zip to extract the zip file, I don't have a .tar file, what am I doing wrong? If I take the unzipped file and compress them to a tar file, the installation fails. After reading this thread, I installed the GT89pitfile.pit from the toolbox, and now I'm stuck in Odin; if I try to go to recovery, the icon just flashes and won't go anywhere.
Help would be greatly appreciated.
SmittyRN said:
Hijacking the thread to the same destination. I was throwing in the towel and about to start the exact same thread, but I'm sill stuck. After researching a bit and trying a couple of things, I seem to be making things worse, so I thought I'd bite the bullet and ask for help while I still can use Odin.
I had also tried to install stock over CM9 and ended up in a bootloop with the blue CM9 guy showing. If fact, I couldn't even shut the tab off, it would power on and re-bootloop. I could get into recovery or Odin mode. I did a factory reset, didn't help. Installing from recovery wouldn't work, as I didn't have anything left on it to install. I researched and the thread with the stock firmware says "Extract tar file from the ROM(remember to extract it till .tar or tar.md5, dont go deep).". When I use 7zip to extract the zip file, I don't have a .tar file, what am I doing wrong? If I take the unzipped file and compress them to a tar file, the installation fails. After reading this thread, I installed the GT89pitfile.pit from the toolbox, and now I'm stuck in Odin; if I try to go to recovery, the icon just flashes and won't go anywhere.
Help would be greatly appreciated.
Click to expand...
Click to collapse
I gave you a link in this post to a thread which contains all ODIN images. Select one image depending on your model (7300 is the 3G model whereas 7310 is the Wi-Fi only model) and then extract the .zip contents and there is your image. The PIT file, as I suggested in my guide, is to be used in conjunction with a .tar ODIN firmware image to Repartition the device in case something goes terribly awry and still, that's no guarantee it will be the ultimate solution. Redownload your desired image.
EDIT: Once you successfully flash through ODIN, in order to go back to stock you HAVE TO do a factory reset in the Stock Recovery menu. Note that you will lose everything including the SDcard contents.
My point is, when I extract the .zip file, there is no .tar file to flash.
SmittyRN said:
My point is, when I extract the .zip file, there is no .tar file to flash.
Click to expand...
Click to collapse
My question is, have you downloaded the zip file from the link I gave you, and even redownloaded to make sure it wasn't a corrupted download?

[Q] Download mode loop in Galaxy Tab 8.9

Hello experts!
Before gifting my Galaxy Tab 8.9 (p7300) I wanted to fully erase my user data and files and flash a stock rom back, so I formatted it in CWM recovery mode.
After that I can only use download mode. When starting with power+volumedown I get two choices: but the recovery mode won't enter (when I press volumeup it blinks fast and do not enter).
The only communication I get to the tablet is with Odin in download mode, and nothing else.
Since then I have made many tryouts with files found on the web: flash pit file, bootloader, cwm recovery, stock recovery and there was no result at all.
I'm really sorry if the answer is in another thread, but I haven't found any solution after 3 days searching the we.
If you solve my problem, you'll get $20. Please help me, I'm deseperate.
Thanks a lot!
Renan
Do you have adb access? If so, can you copy a recovery image to the root directory of the sdcard and flash it via adb?
upconvert said:
Do you have adb access? If so, can you copy a recovery image to the root directory of the sdcard and flash it via adb?
Click to expand...
Click to collapse
I don't have access, unfortunately. Would I be able to flash it in download mode, anyway?
I'm downloading adt-bundle to get access to adb.
renancarlos said:
I don't have access, unfortunately. Would I be able to flash it in download mode, anyway?
I'm downloading adt-bundle to get access to adb.
Click to expand...
Click to collapse
Ok, so what is the problem ???
can't you just flash stock ROM through Odin ??
if so and you're searching for stock Odin ROM
THEN HERE IS THE LINK
omarainea said:
Ok, so what is the problem ???
can't you just flash stock ROM through Odin ??
if so and you're searching for stock Odin ROM
THEN HERE IS THE LINK
I have a stock ROM and CM9 here, but they're all in .zip format, suitable to flash in recovery mode, which I cannot enter.
I couldn't find any ROM in .tar or .md5 format as hotfile server is out, and I don't see how I could flash a ROM with ODIN in .zip format. Is it possible?
Click to expand...
Click to collapse
renancarlos said:
I have a stock ROM and CM9 here, but they're all in .zip format, suitable to flash in recovery mode, which I cannot enter.
I couldn't find any ROM in .tar or .md5 format as hotfile server is out, and I don't see how I could flash a ROM with ODIN in .zip format. Is it possible?
Click to expand...
Click to collapse
Yes I am well aware of that,
the link I gave you in the previous post is for Dev-Host mirror
for a Tar file to flash through Odin
but it is compressed in ZIP format
so you'll have to download it and unzip it using Winrar or 7-Zip
or any other similar Pc program
then you'll get these file :
P7300XXLQI_P7300XXLQ6_P7300GBLMP2_HOME.tar.md5
SS_DL.dll
ignore the .dll file and flash the tar.md5 file through odin and everything will be fine :fingers-crossed:
HERE IS THE LINK AGAIN
Oh and by the way you can't flash a Zip file through Odin
Solved
omarainea said:
Yes I am well aware of that,
the link I gave you in the previous post is for Dev-Host mirror
for a Tar file to flash through Odin
but it is compressed in ZIP format
so you'll have to download it and unzip it using Winrar or 7-Zip
or any other similar Pc program
then you'll get these file :
P7300XXLQI_P7300XXLQ6_P7300GBLMP2_HOME.tar.md5
SS_DL.dll
ignore the .dll file and flash the tar.md5 file through odin and everything will be fine :fingers-crossed:
HERE IS THE LINK AGAIN
Oh and by the way you can't flash a Zip file through Odin
Click to expand...
Click to collapse
It works!
All I needed as really a flashable ROM through Odin. After that I flashed CWM and custo ROM after that. Everything is working now.
Thanks a lot omarainea for the help and support!

[Q] how to flash TWRP recovey????

i want to flash a new rom and to do this i need to get the twrp recovery..
i downloaded to maclaw studio's twrp and when i tried to flash it with odin i saw that i cant flash it because its not tar.md5 file.. i've tried to convert the file to .tar and when i flashed it, it broke my galaxy.. i want to flash twrp 2.7.0.0 but im afraid that it will broke my phone:crying::crying:.. can somebody help my figure out how to convert that zip\img file and make it a tar.md5 so that i could flash my rom??
The zip file is used to flash it through recovery (e.g. CWM or TWRP). You'll need the Odin file. You can also find it on Maclaw's site. Next to most download links, you can also click 'Odin' which gives you the Odin package.
Sent from my GT-I8190 MaclawStudio Carbon 4.4.2 using Tapatalk

[Q] I9070 stuck during installing Touch TWRP Recovery

I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
Just download the factory image .md5 on sammobile.com and flash it via odin
Sent from my GT-I9070 using XDA Free mobile app
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
shut_down said:
You installed GB kernel over JB system, that is not gonna work. Do what Patlcs told you. You can install just kernel, remove md5 from stock firmware, open it with WinRAR or 7-zip and remove all except kernel files (two of them). And flash them via Odin.
Click to expand...
Click to collapse
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
AntaresOne said:
If you modify .tar.md5 file, the md5sum will be mismatched giving invalid file while trying to flash...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I used to do that, I was just removing other stuff. And it was working just fine. BTW, I leave file without *.md5.
solution
pawelvod said:
I tried to install TWRP Touch Recovery. After uploading by Odin "GT-I9070_GB_TWRP_KERNEL.tar.md5" file my phone stuck on the Welcome screen samsung. What did I do wrong?... And what i shall do now?
Click to expand...
Click to collapse
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
silllentkiller said:
even i am also looking for same
did u find any solution ?? if found please help me also to downgrade my phone also
Click to expand...
Click to collapse
1. What problem?
2. He flashed GB kernel over JB - that is his problem.
3. How to downgrade - http://forum.xda-developers.com/showthread.php?t=2195673
4. Solution to have TWRP on JB is to install CoCore kernel with TWRP recovery, just go to developer section of our phone and look for CoCore thread.

Categories

Resources