I got problem with my Nook HD+ display, it now run CM 10.2.1 (emmc). When I charge with AC adapter, the screen always flashing until I plug the cable out ( Stock Rom 2.2.0 doesn't have this problem). Does anyone meet this problem? How can I fix this? Thanks a lot!
Sent from my BN NookHD+ using xda app-developers app
sky0809 said:
I got problem with my Nook HD+ display, it now run CM 10.2.1 (emmc). When I charge with AC adapter, the screen always flashing until I plug the cable out ( Stock Rom 2.2.0 doesn't have this problem). Does anyone meet this problem? How can I fix this? Thanks a lot!
Click to expand...
Click to collapse
It appears your still able to use it kind of flashing. Probably a bug since bn rom is fine. What the bug is idk. Never seen it on 10.1, 10.2 nor 11.
You already know a fix...to use a different rom. Sometimes that's just how it goes.
You could also try a clean install of 10.2 if not already.
sandsofmyst said:
It appears your still able to use it kind of flashing. Probably a bug since bn rom is fine. What the bug is idk. Never seen it on 10.1, 10.2 nor 11.
You already know a fix...to use a different rom. Sometimes that's just how it goes.
You could also try a clean install of 10.2 if not already.
Click to expand...
Click to collapse
I found in this forum that it may be the hardware issue, but the stock FW doesn't have this problem, so I will try on CM11. Thanks!
sky0809 said:
I found in this forum that it may be the hardware issue, but the stock FW doesn't have this problem, so I will try on CM11. Thanks!
Click to expand...
Click to collapse
I got the same problem,either on cm
10.1,10.2or11
sqcda123 said:
I got the same problem,either on cm
10.1,10.2or11
Click to expand...
Click to collapse
Does this happen on a clean fresh install?
Related
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
snowlarbear said:
so i have a HD+ (don't think this matters) running hybrid, 4/22 10.1 build. there have been some updates to the 10.1 recently, my question is do i need to do anything to back up my current apps/settings before upgrading? will my things still be there after i update?
doesn't seem like it would be, but who knows. thanks
Click to expand...
Click to collapse
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Just flash the new CM zip over the top of the old, all apps will remain.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
i saw in the SD install thread that the latest ones (may) are not working with hybrid.
flying1911 said:
Do the latest cm10.1 roms i.e 11/5 and 12/5 work with your Hybrid method? Because I thought I read somewhere in your hybrid thread that they wouldn't work
Click to expand...
Click to collapse
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
They do not. He used a different ramdisk on those and my ramdisk crashes. I am working on it, but may take a little while.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
update for anyone reading this, leapinlar released the hybrid fix for the newer roms. will give it a try after i clarify how to get a rom with tablet mode enabled.
Any help would be greatly appreciated.Hello all thank you for you time. I'm running cm10.1 unofficial nightly build 05.22.13 on my touchpad with the latest adobe flash apk and Firefox app from Googleplay.
The issue that I'm having is my display would go to sleep as configure per my display setting while I'm streaming flash content at full screen. Not sure why this is happening and not sure if this is just my device. I didn't have this issue with cm9. Only notice this with cm10 and now 10.1. Theodd thing is that this issue is also happening with my nook color and nexus 7 with cm10.1
My current work around is setting display to time out 30 mins and touch the display every now and then.
Any help would be greatly appreciated
Thanks again
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
https://play.google.com/store/apps/details?id=it.android.keepscreenon
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
gradular said:
imanobe said:
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse
nickster1 said:
gradular said:
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse
I,ve been flasing custom roms since the touchpad and nook color was out so i'm curious to know what I did wrong with these installs. I've had this issue happened to me with multiple devices. Nexus 7 nook color and my touchpad . All install were done with complete wipe of device.
Click to expand...
Click to collapse
imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse
spunker88 said:
imanobe said:
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse
imanobe said:
spunker88 said:
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse
Samsung probably built in some code to be more flash-compitable.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Flash runs smooth on my Droid3 with CM10.1 even though the rom is far from stable. Also runs well on the Razr with stock 4.1.2 update. Its just on the Touchpad that 4.1+ have issues with flash in my experience.
Sent from my cm_tenderloin using Tapatalk HD
ok guys I'm sort of a newbie to this stuff so i would really love it if you guys could help me out! I'm trying to update my CM 10.1 to CM 10.2 so that i can get 4.3 and i found a post about it being possible to do it on a nook, so i downloaded all the stuff i needed just like when i put 10.1 on it and everything seemed to go fine when i was downloading it but when i booted it up none of my gapps are working (and i got the 4.3 apps that i was supposed to get) and it still says that i am running on 4.2.2....
now I'm sure i have done something wrong and it's probably the easiest fix in the world but if there is anyone out there who can tell me how i need to go about doing this update i would be very appreciative thank you very much and i hope you all have a great day!
Kreachur said:
ok guys I'm sort of a newbie to this stuff so i would really love it if you guys could help me out! I'm trying to update my CM 10.1 to CM 10.2 so that i can get 4.3 and i found a post about it being possible to do it on a nook, so i downloaded all the stuff i needed just like when i put 10.1 on it and everything seemed to go fine when i was downloading it but when i booted it up none of my gapps are working (and i got the 4.3 apps that i was supposed to get) and it still says that i am running on 4.2.2....
now I'm sure i have done something wrong and it's probably the easiest fix in the world but if there is anyone out there who can tell me how i need to go about doing this update i would be very appreciative thank you very much and i hope you all have a great day!
Click to expand...
Click to collapse
Are you trying to update CM10.1 that you installed on emmc? If so, you can't. The version of CM10.2 that is available is for SD installs, not emmc. Flashing it to emmc will not work.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Are you trying to update CM10.1 that you installed on emmc? If so, you can't. The version of CM10.2 that is available is for SD installs, not emmc. Flashing it to emmc will not work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
oooooh ok thank you so much, I had not realized that. So for now i guess i will just go back to my trusty 10.1, do you know if they are currently working on a 10.2 emmc?
Kreachur said:
oooooh ok thank you so much, I had not realized that. So for now i guess i will just go back to my trusty 10.1, do you know if they are currently working on a 10.2 emmc?
Click to expand...
Click to collapse
No, I don't know. But I'm sure it will be available someday.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No, I don't know. But I'm sure it will be available someday.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
alright well thank you again!
CM10.1 to 10.2 upgrade for sdcard builds
After several tries that resulted in one issue or another, I successfully updated my sdcard install from CM10.1 to CM10.2. I think my unsuccessfuly attempts failed because of gapps. One of the links in th CM10.2 thread pointed to a GAPPS 4.3 "Core" zip file that ultimately worked for me. The other gapps 4.3 files usually resulted in the "two cLock app" error and I could never connect to Google service (Play Store and GMail, in particular). My wi-fi indicator on the status bar remained grey, never turning blue. All of my network-dependent apps worked (CNN, XDA, etc.) except for those that depend on Google.
Other issues that seem consistent:
1. Can't see internal storage (emmc); I can't find it anywhere (usual contents of /storage have been apparently moved anyway)
2. Weather Channel app had to be set up from scratch
3. News & Weather app/widget is gone
4. Background image seems to get reset occasionally (from a live wallpaper that I selected); not necessarily limited to CM10.2, but seems to be more prevalent now than with CM10.1
...
999. I'mnot certain if it is related to CM10.2, but the Engadget app has been pretty unstable since the upgrade.
-SUO, now only wants Halo and TabletUI
According to this post,
cyanogenmod [dot] org/blog/cyanogenmod-10-1-3-rc1
edfcmc said:
According to this post,
cyanogenmod [dot] org/blog/cyanogenmod-10-1-3-rc1
CM just announced one update to the CM 10.1 branch of code. I tried posting this in the other CM 10.1 thread, but I cannot due to my newbiness. Anyway, does anybody know if 10.1.3 RC1 will get ported to the Nook HD Ovation? Can somebody ask everygreen the awesome guy who has been doing all this stuff? I really havent made the switch to 10.2 and probably wont for quite a while. I currently run 10.1 the last one from 8/13. I wonder of 10.1.3RC has anybody better. Oh well. I hope this makes sense.
Click to expand...
Click to collapse
I missed the boat on 10.1.3RC1, but RC2 and eventually 10.1.3 stable should be made for our devices too.
Where should we watch for updates about when this is available? Seems all of the chatter over in the dev forum is only about CM10.2.
mr72 said:
Where should we watch for updates about when this is available? Seems all of the chatter over in the dev forum is only about CM10.2.
Click to expand...
Click to collapse
It's up now.
HD (hummingbird) http://download.cyanogenmod.org/?type=RC&device=hummingbird
HD+ (ovation) http://download.cyanogenmod.org/?type=RC&device=ovation
Update
NookE said:
It's up now.
Click to expand...
Click to collapse
Would installing this new 10.1 RC from the updated in CM be wise?
Still very new to this. Just got CM put on my Nook this weekend and would hate to have to start fresh again.
I would suggest installing any RC version. They are supposed to be pretty stable and have bug fixes that you'll want (not to say that they won't have bugs of their own).
artesea said:
I would suggest installing any RC version. They are supposed to be pretty stable and have bug fixes that you'll want (not to say that they won't have bugs of their own).
Click to expand...
Click to collapse
I think he's asking about updating from the CM menu. I received a notification today that RC 2 was available, will I lose all my apps and data if I update from there?
Mugby said:
I think he's asking about updating from the CM menu. I received a notification today that RC 2 was available, will I lose all my apps and data if I update from there?
Click to expand...
Click to collapse
No.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for the help!
I updated it with the internal CM updated but it kept hanging on boot and restarting so I just went ahead and did a manual install.
My Nook runs much smoother now! Hopefully it won't keep rebooting and hanging on boot as much as before.
Hey guys and lads
Today my nook arrived and I was happy to flash CM 10.1 on it.
Everything went well and it was running smooth'n fine!
But for some reason I made the decision to update it over the tablet itself... To some stable m1 update.
after that everything went down.
Wlan connection was horrible, everything seemed laggy and the display wasn't reacting in some cases.
I can still open stuff and the keys are working, but the display itself isn't reacting (cant power it off, lol)
I wiped everything and reflashed the rom, but still got these problems.
What happened? Do I need to trim it?
edit:
Managed to start the device in "safe mode", there everything worked smooth and the display reacts again!
Could reboot it now and suddenly everything works again.
Still im concerned if everything is okay now.
Please help me out here, thanks!
If you went from CM10.1to M1 (which is CM10.2), you need to update the gapps also. You need 20130813.
Sent from my BN NookHD+ using xda premium
ok thank you bro,
Can u tell me if i need to trim my device?
ok thank you bro,
But still, why did my display and perfomance drop out so hard?
Now everything is fine, but I want to know if need to fix something.
Do I need to trim my device?
riboswitch said:
ok thank you bro,
Can u tell me if i need to trim my device?
Click to expand...
Click to collapse
I have no idea. If it is working ok now, I would think not.
Sent from my BN NookHD+ using xda premium
leapinlar said:
I have no idea. If it is working ok now, I would think not.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
CM 10.2 is based on Android 4.3 while 10.1.3 is still Android 4.2.2. -- I would recommend doing a full wipe / factory reset between CM installations with (rather) big version number changes like that. Of course this only applies if you didn't already do a factory reset in the first place.
You should also consider that an M1 Snapshot is not really a stable release. It's more stable than a nightly, but not as stable as a RC release or a a real stable release. Why the M1 shows up as an update on my Nook is a question that I've asked myself before, too. Especially when I consider that I've set up the update service to only show stable releases.
leapinlar said:
If you went from CM10.1to M1 (which is CM10.2), you need to update the gapps also. You need 20130813.
Sent from my BN NookHD+ using xda premium
Click to expand...
Click to collapse
LEECH666 said:
CM 10.2 is based on Android 4.3 while 10.1.3 is still Android 4.2.2. -- I would recommend doing a full wipe / factory reset between CM installations with (rather) big version number changes like that. Of course this only applies if you didn't already do a factory reset in the first place.
---------- Post added at 01:01 PM ---------- Previous post was at 12:55 PM ----------
http://wiki.cyanogenmod.org/w/Ovation_Info
You should also consider that an M1 Snapshot is not really a stable release. It's more stanle than a nightly, but not as stable as a RC release or a a real stable release. Why the M1 shows up as an update on my Nook is a question that I've asked myself bevore, too. Especially when I consider that I've set up the update service to only show stable releases.
Click to expand...
Click to collapse
Ok thank you sir
Yes it's akward that it shows nightly builds instead of the stable version
Well today (after 3 days or so) my device was lagging again, atleast the display wasn't reacting.
Had to reboot to safe mode and then reboot again. Now it works like a charm, but this is pretty strange.
Any solutions for me? I still dont get when i need to trim or what the risk is, since I hot the "bad" eMMc.
riboW
push.
Is my problem a sign to do a trim?