Related
New MotoX from sprint.
android version 4.2.2
baseband msm8960pro_bp_2323.020.90.00r
kernel 3.4.42.-xline.
system version 139.14.1
build 13.9.0q2.x-116-mx-17-57-1
i did a fair amount of searching but could not find the proper instructions for obtaining root access for the moto x. Need root access or this device would be a deal breaker.
Can someone point me to a link? I would be much appreciated. Thanks Listers!!!
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
I did search the web and the forums; I'm sorry. it was a long day, i had just purchased the phone and wanted to make sure i didn't brick it. I have rooted/jailbroken several other devices but wanted to know if the latest ota update would cause a problem for that.
Again, I'm sorry for for the excess forum baggage.
I'll try again.
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
moises1204 said:
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
Click to expand...
Click to collapse
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
bullpen7979 said:
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
Click to expand...
Click to collapse
ownmoto or whatever?? um... ok... I can tell you haven't browsed the different sections for the Moto X here or you would have seen in the "Moto X Original Android Development" section that its called "PwnMyMoto"
Brokenwall gave you a way to root your sprint device, no matter what stock rom you're running... OTA updates or not. Granted unlocking your bootloader voids your warranty... and he didn't give you a 100% newbie step by step guide which it now seems you were really looking for.
Also in the Moto X Original Android Development is a thread titiled... "[Root] RockMyMoto (Yes, even the first OTA)" which is pretty obvious as to what it is for. If you took a few minutes to read it, you'd know it is what you want if you don't want to unlock your bootloader. Its not a very long thead (141 posts currently) so it wont take long to read. The original post contains everything you need, except how to make sure you have Telnet as part of your Windows install (there are posts in that thread later that say what to do to enable/install Telnet as a Windows Feature inside Add/Remove Programs).
Sorry, if I come across as harsh. I know you just want to root without screwing up your phone, and I get that. But I'm afraid if you haven't been able to look around and find this stuff, you'll likely not be able to properly follow and understand the instructions and will therefore stand a good chance of messing up your phone!!!
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Again, I'm sorry for being stuck here and having to ask the question. I would greatly appreciate the assistance of someone who can speak to my specific situation.
Thank you and regards to those who can help.
Bull
bullpen7979 said:
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
Click to expand...
Click to collapse
The steps taken in the video are exactly explained in the post.
There are a few assumptions.. 1. Your PC has telnet on it, or you know how to install it. (there is a link further in that thread which Windows users can follow. 2. You have ADB Driver and Platform tools from the AndroidSDK installed correctly on your PC, and Moto drivers installed. Again, there are threads on this already, so you'll have to find/follow them.
You could also try to follow this post -> http://forum.xda-developers.com/showthread.php?p=47067076 however, it uses puttytel.exe instead of Telnet so it will look a little different. It too assumes you've properly installed ADB Driver and Platform Toos from the Android SDK along with the Moto drivers.
Another option is the "Tool Kit" -> http://forum.xda-developers.com/showthread.php?t=2477132 which is an "all in one" type tool that should set things up and help you too. I've not used it, but it appears to be a complete package including ADB and the drivers. Only thing would be if you want to use "Flash back to stock" you need to download the ROM file separately.
bullpen7979 said:
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Click to expand...
Click to collapse
Right now, there is the rom the phone shipped with. If you have that, you use PwnMyMoto process to root it. The "camera update" that was pushed over the air. If you have that, you use RockMyMoto. And as of yesterday, if you have Verizon X, there is KitKat which can not be rooted (unless your carrier allows you to unlock your phone's boot loader)
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. Bummed. I just want my device rooted so I can send my daughter the one I promised here.
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. I'd even accept remote assistance via logmein. Pretty bummed. I just want my device rooted so I can send my daughter the one I promised her.
I have no idea why this process has been so difficult this time around. I have rooted, downloaded & installed custom roms, etc.
http://forum.xda-developers.com/showthread.php?t=2536200
Please help. I am out of ideas.
jayboyyyy said:
http://forum.xda-developers.com/showthread.php?t=2536200
Click to expand...
Click to collapse
Isn't this just for the verizon model?
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
I have to believe it can be done, I'm just not getting it for some reason.
I'm really sorry, as I have said in multiple posts. Like I said, I would paypal you a reasonable sum if one of the more experienced people out there want to remote in via logmein and help. I know that sounds lame. I'm normally a guy who likes to research it all himself and do this.
I'm normally the guy who helps other people with this stuff, but I just can't hash this out. I've spent the last three days of my free time reading, researching, trying to get the thing to connect as a drive so I can push files to it and run them via adb.. Even went so far as considering buying a wireless adapter to put the files there wirelessly. I'd try now but I'm exhausted. If you can help, please PM me and we can work out something if you are willing. Thanks to those who have suggested methods. I do appreciate your help. I have tried them all except the last kit kat method which I thought was just for Verizon. I'm with sprint. As tired as I am, I'm afraid to brick the thing. I'm very close to asking for a method to restore the phone and take it back. I really wanted wireless tether. I need it for work and to run the ipad on occasion. Sorry this was a long post/thread.
Sorry I'm not as quick as the rest of you. Just want a rooted phone and can't seem to get it done this time on my own.
Any suggestions?
bullpen7979 said:
Isn't this just for the verizon model?
Click to expand...
Click to collapse
No. That will work for any Moto X Developer Edition or Carrier edition with an unlocked boot loader. So T-Mobile, Sprint, etc.. If you can unlock your boot loader via -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth then you can root via this process.
bullpen7979 said:
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
Click to expand...
Click to collapse
To get your phone to show up in windows as Drive Letter, needs USB Mass Storage mode. Ok, You've installed an app for that, fine... but 1. I'm not aware of that app working, and more importantly, 2. I am not aware of any root method in these forums that requires your phone to show as a "drive letter" to work. So I couldn't even begin to suggest what you are doing wrong.
What instructions are you actually trying to follow? Why not post questions on it in that particular thread, including exact details of what you've done, what you see on your phone, any/all errors or messages, etc.???
And if what you really want to do is tether with sprint, I hope you have checked out threads with suggestions on hacks/ways that work to tether on Sprint Moto X before you worry about rooting.
For example, if you want to remain non-rooted, FoxFi could possibly be an option. As I am a Verizon user and haven't used it, I can't say how well it works for Spint, and I can't say how well it works for Verizon, just that Verizon KK users say it doesn't work, but it did with the JB/4.2.2 roms..
KidJoe;
Thanks for your patience. I'm sorry about all of this. I have tried to be as clear as I can be, but I will redouble my efforts. Let me read clearly that last link and I will post back. I do want root access for all the other cool things it enables too, so I'm determined to get it right. I just want to be careful not to miss something and turn a decent phone into a paperweight.
That link you referenced is exactly what I used to unlock. When I reboot the phone, I get a white screen with a red exclamation point that says bootloader unlocked.
Fox Fi is a no go
Update. Just tried Foxfi. Does not work with current status of unlock but not rooted. I need root, but how does one copy files to the device via usb? I remember there being a setting.
I opened a new thread on this subject. http://forum.xda-developers.com/showthread.php?p=47740046#post47740046
Hope that's not against the rules. I really thing the failure is related to my inability (or ignorance of how to ) push files to the device.
Good gravy. This has eaten up WAY too much time.
Apparently its a mixed bag over at sprint. Some can some can't.
http://www.sprintusers.com/forum/showthread.php?t=234246
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Seriously?
There aren't enough threads and guides for you to read already? Everything you need is already out there on this forum so why start another thread just because you are too lazy to search and read for yourself?
I have read around and have tried a number of guides a number of times. They haven't worked for me and I'm just wondering what i'm doing wrong. Even though all the information is out there, I don't have the experience to understand it apparently. I've spent hours trying to figure things out but i keep reading conflicting info and half-explained steps and now I'm just confused and would like a clear point in the right direction.
So, do i need to reflash the latest firmware, wait a few hours, then try again on a full charge? Or do i need a euro firmware? Which guide should i follow?
I've downloaded a few applications and driver packages and whatnot but if those could possibly conflict with each other and cause problems i could work with a fresh OS. I'm running OS X but i have linux VMs and friends with clean windows installs (mine is all sorts of messed up)
eatfoodnow said:
I tried to unlock my bootloader, following various guides, and kept getting stuck on the "Download Mode !!!" part. I just want to install the latest stable version of Cyanogenmod on my phone since the stock ROM is being a real pain for me (very slow and unresponsive).
I have:
Android 4.1.2
Build Number: JZ054K
Software Version: AME-XXX
I read online that you need the Euro firmware to unlock the bootloader, can I flash the euro firmware and will it mess with my service? I'm confused as to how the firmware affects things since I've read conflicting information. I didn't flash my firmware a few hours before trying to unlock, so maybe that's the problem?
Click to expand...
Click to collapse
It isn't a question of firmware, the phone needs to have an unlockable bootloader to be able to be, well, unlocked. Here is a list http://forum.xda-developers.com/showthread.php?t=2181581 of P880 bootloader versions. Follow the guide to check which BL your phone has.
Thats obsolete, all versions can be unlocked afaik, either with official method or by fuse editing. No need to keep sim card in,you just need proper drivers
Oh, OK, I didn't know that. But, even better, OP should not have any trouble, provided he follows the BL unlock guide here http://forum.xda-developers.com/showthread.php?t=2224020
Maybe his BL is already unlocked OR is relocked (meaning can't be unlocked anymore).
Its more likely that his drivers are messed up imo.
The fuse editing method should work for everyone, i recommend you give it a try
So the fuse method would be the "BL-unlock.bat" method on that bootloader unlock forum post? I've tried it before, but I'll try it again. The directions only say to run it, is there anything else I need? Now, since it's a .bat file I absolutely have to run it on Windows, right? Because if so I'll use a friend's computer instead of my windows installation.
What are the necessary installations before I run the file? How should I configure settings on my phone? (like what type of usb connection should it be)
There are a lot of things that people expect readers to know but I'm really not very knowledgeable about standard practices for phone stuff so I really need every step. Thanks for helping!
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Flying_Bear said:
Since its.bat file, you can open it in text editor to see which commands it executes. I'd still recommend to do it on windows machine, other OSs may work but aren't tested.
You need abd & fastboot drivers, plus drivers for our device. It's been a while since I've done it, but afaik you can get proper device drivers via lg support tool.
Click to expand...
Click to collapse
Also, correct me if i'm wrong I only had stock for 2hours, but also stock needs usb debugging to be enabled or adb won't work?
Yep, afaik usb debugging needs to be enabled
When you are fast enough, it is possible in charging mode wihle the carger animation is shown. But you have install adb driver very fast...
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
eatfoodnow said:
So I'm pretty sure I got the bootloader unlocked, I ran the .bat file and it went through everything until the part where it checks to see if my bootloader is unlocked, it just froze forever, so I closed it.
How should I go about checking?
Also, what would be my next step now for installing CM10.1.3? I tried to follow the guide on the cyanogenmod wiki (install_CM_for_p880) (I can't post links yet)
...but ran into problems with pushing it into root with adb. It said I didn't have permissions, so I googled some stuff, but just got myself confused.
Thanks for all the help btw!
Click to expand...
Click to collapse
you can check your bl status by entering sw mode (phone off, hold vol+ and insert charger) or reeboting into bl (adb reboot oem-unlock)
to install cm steps are:
-install recovery (you can choose either cwm or twrp, it's more about looks than functions)
-download rom zip onto sd card
-install said zip from said recovery, there's no adb involved
Now my personal opinion, I really don't see the point in flashing 10.1, i would go staright for cm11 if i were you
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
eatfoodnow said:
Ok well I think I got things together more or less, eventually I tried to install CM10.1 with the ROM manager app. I forgot to select the options to wipe my data partitions and now I'm stuck in an endless boot loop every time I turn the phone on. I tried to boot from my backup using CWM which I made with the app prior to trying to install, and it gave me an error about an MD5 checksum failing, no matter what I tried. Should I do the factory reset/wipe option with CWM now? What's my best option.
Also why would you recommend CM11 over CM10.1? I don't want to have to deal with a nightly, all this phone stuff is a supreme headache to me.
Click to expand...
Click to collapse
Factory reset then get nandroid manager app and see if you can restore your stuff with that
CM11 is bugless atm and performance (imo) is way superior
So after a factory reset/data wipe, my phone just booted into CM10.1 and now that's working. And it looks like all of my stuff on the phone is still there (though of course apps aren't installed and whatnot, that wouldn't make sense). Thanks for all the help!
I tried to find a feature list or something to see what exactly is better about CM11, and found out that "stable" doesn't exactly mean stable for CM, and that it looks like a good idea to update, so I think I will try to update to that. Do you know anywhere that has an actual feature list to show me what CM11 does that CM10.1 doesn't?
Hello everyone:
This will be my second post here, so please be gentle...
As you can see, I have the VS98010B FW, and although I've spent a whole day searching in this forum (an others) how to even get the 12B FW to at least get started with the update, have failed in every attempt...
I'm on Mac, but have tried the Upgrade Assistant on Windows, and it doesn't even recognise it. The OTA update doesn't work either, so I'm stuck.
So please: what do I have to do to upgrade my phone???
Forgot to mention that I did a Factory Reset, but some how kept root access.
Thanks in advanced for your help,
Rober7 said:
Hello everyone:
This will be my second post here, so please be gentle...
As you can see, I have the VS98010B FW, and although I've spent a whole day searching in this forum (an others) how to even get the 12B FW to at least get started with the update, have failed in every attempt...
I'm on Mac, but have tried the Upgrade Assistant on Windows, and it doesn't even recognise it. The OTA update doesn't work either, so I'm stuck.
So please: what do I have to do to upgrade my phone???
Forgot to mention that I did a Factory Reset, but some how kept root access.
Thanks in advanced for your help,
Click to expand...
Click to collapse
If you have access to a windows machine, wipe it back to stock and let it take the OTA, you can root it with ioroot25 afterwards.
http://forum.xda-developers.com/showthread.php?t=2448960
A factory reset just wipes the /data directory, it doesn't touch /system where your root apps are (su, busybox)
mjones73 said:
If you have access to a windows machine, wipe it back to stock and let it take the OTA, you can root it with ioroot25 afterwards.
http://forum.xda-developers.com/showthread.php?t=2448960
A factory reset just wipes the /data directory, it doesn't touch /system where your root apps are (su, busybox)
Click to expand...
Click to collapse
Thanks for replying! Took my time to reply back because I was following the tutorial you pointed (trying to do it on VB from Mac, but that's a whole other story), and finally got to do it right (now have the 11A FW)
BUT, when I hit the "Check New" to update, it hangs there for a minute and then says "Download Unsuccessful"...
I must clear out as well that I'm using it with another carrier (Orange) outside US.
Rober7 said:
Thanks for replying! Took my time to reply back because I was following the tutorial you pointed (trying to do it on VB from Mac, but that's a whole other story), and finally got to do it right (now have the 11A FW)
BUT, when I hit the "Check New" to update, it hangs there for a minute and then says "Download Unsuccessful"...
I must clear out as well that I'm using it with another carrier (Orange) outside US.
Click to expand...
Click to collapse
That is your issue then... you have to be on Verizon to get the OTA
To update you should try using Windows and use the Verizon LG Software Upgrade assistant software, it should prompt you to install it when you connect your phone to a PC. If it doesn't, open My Computer and look for a CD-ROM drive associates with your phone and run it.
acejavelin said:
That is your issue then... you have to be on Verizon to get the OTA
To update you should try using Windows and use the Verizon LG Software Upgrade assistant software, it should prompt you to install it when you connect your phone to a PC. If it doesn't, open My Computer and look for a CD-ROM drive associates with your phone and run it.
Click to expand...
Click to collapse
First off, thanks for helping out as well. I tried that, but it doesn't see it. Today I upgraded to VS98012B, and followed this tutorial
http://forum.xda-developers.com/showthread.php?t=2699123 to force the OTA update.
Everything was fine until after the reboot: it said: "Softwareupdate fail!"
I'm getting a little bit frustrated with this... Is there a flashable version of the official KK?
Found this tutorial, which I followed to be finally on KitKat!
http://forum.xda-developers.com/showthread.php?t=2699123&highlight=software+update+fail
Although, do not flash anything until you have EVERYTHING on your internal drive!!! if not, you'll end up having to know the term "sideloading"...
I have a (previously) rooted D950, and I can't get the OTA At&t update to install. I've completely removed root, and double checked through root checker that it's gone, and the update errors out every time with a message about having been rooted.
I read another thread where some people report being able to retain root after receiving the update THEN downgrading and rooting 4.2.2., then installing the OTA again, but it seems that I jumped the gun and rooted first, which is now causing the install to error out.
Has anyone else experienced this? Found a workaround? Ideas? Totally frustrating.
Sent from my LG-D950 using xda premium
Here is the link to a detailed guide . Dev hyelton's page includes links to AT&T ROMs.
If you need help with LG Flash Tool:
- Connect your phone with usb to laptop/computer and open device manager
- seek for Ports: COM & LPT, right click onto Android LTE usb port connection, click "properties", click "Advanced", then change port number to number 41, click "OK"
- DOWNLOAD LG Flash Tool and install .exe
- DOWNLOAD MegaLock.zip (3kb), unzipped (7kb)
- Exchange MegaLock.dll in your system folder "LG" with the unzipped MegaLock.dll file that you have downloaded
- Open LG Flash Tool, input .dll file of downloaded stock rom.zip folder and input .tot file of this folder
- Click onto USB instead of LAN, then click "OK"
- Left arrow at the window top should be enlightened now
- Click onto this arrow
- Wait for all popup windows telling milky way download and connections to fail
- Wait then for the check of CRC and .dll files
- One or all ports should be opened, "READY" enlightened
- Disconnect your phone from computer
- Connect again and watch the immediate start of the flashing process
- After completion you must install most of the app updates, update your LG and/or AT&T profile before installing kitkat update.zip
If you'll stick in updating stock rom to kitkat, watch my video on YouTube (it's about LS995 Sprint, but AT&T LG Flex will proof the same installation process):
Visit my blog at http://www.myreviewsofreviews.for the detailed description how to avoid bootloop during the installation of LG Kitkat update.zip via ADB sideload
Thanks, but this is not a fix. Unfortunately, that guide is of no use since his links are still down. Further, I was hoping for feedback from others who have experienced this issue, and found a resolution. I have read that this is also happening on devices that have not been rooted.
I am not looking to flash a rom through FlashTool. I'm looking to fix the OTA error. All I want to do is install the OTA update.
lorawithano said:
Thanks, but this is not a fix. Unfortunately, that guide is of no use since his links are still down. Further, I was hoping for feedback from others who have experienced this issue, and found a resolution. I have read that this is also happening on devices that have not been rooted.
I am not looking to flash a rom through FlashTool. I'm looking to fix the OTA error. All I want to do is install the OTA update.
Click to expand...
Click to collapse
Not sure what you were hoping for but the guide is correct process for your problem. You need to flash back to 4.2, don't touch anything in the way of modifying system files or deleting bloatware, sign into your main Google account, update all your apps...then root the phone and when it reboots look for the ota. I would give it a couple min to setup after flashing back to 4.2 so that it successfully finds the update rather than telling you you're on the most current software. I had your exact problem too, I was one of the first AT&T users on here to take the update I tried everything to
A: retain root with supersu features and some root cloaker programs etcetera
B: factory reset, call AT&T, to get them to push the update again because I just could not get it to successfully flash without detecting suspicion of root.
Flashing back to 4.2 to retain root worked for me over 4 times now on 3 different flex phones (I had some hardware and then software issues on my replacement model)
Sent from my LG-D950 using XDA Premium 4 mobile app
brittoking said:
Not sure what you were hoping for but the guide is correct process for your problem. You need to flash back to 4.2, don't touch anything in the way of modifying system files or deleting bloatware, sign into your main Google account, update all your apps...then root the phone and when it reboots look for the ota. I would give it a couple min to setup after flashing back to 4.2 so that it successfully finds the update rather than telling you you're on the most current software. I had your exact problem too, I was one of the first AT&T users on here to take the update I tried everything to
A: retain root with supersu features and some root cloaker programs etcetera
B: factory reset, call AT&T, to get them to push the update again because I just could not get it to successfully flash without detecting suspicion of root.
Flashing back to 4.2 to retain root worked for me over 4 times now on 3 different flex phones (I had some hardware and then software issues on my replacement model)
Sent from my LG-D950 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You say flash back to 4.2, but I am already on 4.2. Never left 4.2. That's the issue. The device is defective. They're sending me a new one.
lorawithano said:
You say flash back to 4.2, but I am already on 4.2. Never left 4.2. That's the issue. The device is defective. They're sending me a new one.
Click to expand...
Click to collapse
You didn't understand my post at all it seems, I gave you the instructions to flash back to STOCK which would have fixed your problem. I did accidentally word my post incorrectly saying "flash BACK to 4.2" obviously I knew you were on 4.2, so clearly I meant use the aforementioned guide to flash back to stock then take the update. Looks like you went another route, congrats
Sent from my LG-D950 using XDA Premium 4 mobile app
Huh? Wut
Not sure where things went wrong here.....
Me thinks some thread cleaning is in order...
Stand-by....
Cleaning finished.
Come on folks, let's relax and take a breath. Sometimes things just don't work and there's little to be done about it. If common known procedures don't work, then hopefully something else will, and just move along to something else.
Or in this case, the device is being returned which of course solves all.
No need for anybody to get all bent out of shape, what started out as being helpful, just took a bad turn somewhere for unknown reasons.
Relax, be cool....
MD
KitKat update on ATT G FLEX running on Tmobile.
This might be a stupid question . I have my ATT G FLEX D950 running on Tmobile. It is on Jellybean . I am unable to pull the Kitkat update and it says "Phone is not registered on network". I am assuming I need to get my phone on ATT network to pull the update. Am I right? is there any other way out ?
santy83 said:
This might be a stupid question . I have my ATT G FLEX D950 running on Tmobile. It is on Jellybean . I am unable to pull the Kitkat update and it says "Phone is not registered on network". I am assuming I need to get my phone on ATT network to pull the update. Am I right? is there any other way out ?
Click to expand...
Click to collapse
Kinda, yes.
I had the same problem. My phone was never activated on the ATT network so it would not recognize it. You have 2 options:
Get a prepaid sim from ATT, use it once and than put your Tmobile sim back in there or ask a friend that has ATT to use the sim for a few minutes. A text or a phone call is all you need.
Worked great for me.
I'm a bit slow to realize this, but after updating to T mobile's latest 20b firmware (lollipop 5.0x), it lost root. I then tried to root it, using the three methods mentioned here: http://forum.xda-developers.com/showthread.php?t=2732311.
Towelroot clearly doesn't work anymore. The zip file in the above thread couldn't be flashed since there's no recovery operation possible (just showing an android with ! in a triangle sign). I also tried the purpledrake, but the script doesn't run when the phone is connected with all drives installed and adb devices showing the phone. I then tried to get fastboot mode back (to install twrp/cwm recovery to flash the zip file) by following http://forum.xda-developers.com/lg-l90/general/guide-fastboot-l90-d415-t2827825 which I have done successfully before, but then couldn't do it because it requires root (doh!).
So it seems that I just lost my ability to root, unless I downgrade to a stock kitkat (10e?) from tmobile, and then towelroot/etc. assume those work.
Anyone with experience on the stock 20b firmware? Can you root it and how? I'd love to use the beautiful 12.1 Cyanogen that's available here, but the camera doesn't work right on mine. Thus stock 5.0 seems to be the best option. Many thanks.
I got a bit further on the purpledrake method, in that I had to do a clean restart on the phone and connect to usb before the script will recognize. However, it ends up giving a really quick error message after trying a temp root: "your phone is not running a compatible software version. No vulnerable mode detected. Rebooting phone."
Anyway, many thanks to @brossovitch I followed http://highonandroid.com/android-smartphones/how-to-root-lg-g-flex-2-g2-g3-on-lollipop/ and it works like a charm. I can't seem to delete this very short thread so I thought I'd wrap it up with a solution. If it seems a bit useless please remove the thread (or tell me how to do it since I can't find the "easy button"). Thanks.