Related
Anyone know How to make a call from the Note 3 and not have it go through Galaxy Gear watch? Iam not sure if its possible. If I start a call from my phone I want to use my phone for the call.
Thanks
I thought that's how it was supposed to work
spinkick said:
I thought that's how it was supposed to work
Click to expand...
Click to collapse
The call unfortunately goes through the watch. Annoying
If you initiate a call from the phone, it should only transfer when you hit the headset button on the screen... might want to reset the Gear and re pair it...
Or turn off Bluetooth and it won't go through gear.
Ian B
stu5797 said:
The call unfortunately goes through the watch. Annoying
Click to expand...
Click to collapse
Something isn't setup right if your calls are going to the watch by default. The only calls that go to my watch are calls started on the watch, calls answered from the watch, or calls transferred to the watch after they have started. Calls made on the phone stay on the phone unless I specifically send them to the watch. Are you sure you don't have the watch set to act as a wireless headset full time?
stu5797 said:
Anyone know How to make a call from the Note 3 and not have it go through Galaxy Gear watch? Iam not sure if its possible. If I start a call from my phone I want to use my phone for the call.
Thanks
Click to expand...
Click to collapse
I dunno if this is your problem but I had a problem one time with some phone where the button you push to transfer the call to blue tooth was always on. Every time I made a call I had to take the phone off Bluetooth. I don't have my note 3 yet so can't tell you how to do it but in the phone app look for the headset button. On my note 2 it is right the on the main screen during a call
Sent from my SPH-L900 using Xparent Purple Tapatalk 2
I have the same issue w my
Gear
Sent from my LG-D800 using xda app-developers app
Are you guys using a Note 3? The problem you are describing happens with my S4 when it's paired to the Gear but never happens paired to the Note 3.
I think that's what it's supposed to be because mine goes thru the Gear as well. Still fiddling with my phone's settings... but just hit the green-lit Headset icon then it's good to go.
When I get a call, both the Note 3 and the Gear show an incoming call. It is up to me to swipe on the Gear or the Note to answer the call and continue the call on whichever one I swiped to accept the call.
Ian B
If I initiate my call from the phone, it stays on the phone.
If I initiate my call from the watch, it stays on the watch until I transfer.
The same thing is true about receiving the call. It's working as expected.
stu5797 said:
Anyone know How to make a call from the Note 3 and not have it go through Galaxy Gear watch? Iam not sure if its possible. If I start a call from my phone I want to use my phone for the call.
Thanks
Click to expand...
Click to collapse
Same problem with S4. All the time, when i start call from phone i have to push headset button off. Till now i did not find any settings in phone to change it.
... Oh, and it's an S4 not a Note 3, FWIW...
how should be the game if you have a bluetooth headset/ car bluetooth either doing a call or receiving one?
Onyok said:
I think that's what it's supposed to be because mine goes thru the Gear as well. Still fiddling with my phone's settings... but just hit the green-lit Headset icon then it's good to go.
Click to expand...
Click to collapse
Where is this button found? I haven't yet been able to transfer a call to bt headset from watch...is there some setting sonmewhere that does this?
charlie
ArborRes said:
If I initiate my call from the phone, it stays on the phone.
If I initiate my call from the watch, it stays on the watch until I transfer.
The same thing is true about receiving the call. It's working as expected.
Click to expand...
Click to collapse
Agreed this is how it is working for me as well.
ArborRes said:
If I initiate my call from the phone, it stays on the phone.
If I initiate my call from the watch, it stays on the watch until I transfer.
The same thing is true about receiving the call. It's working as expected.
Click to expand...
Click to collapse
Same with headset ..
if I initiate my call from the phone, it stays on the phone.
If I initiate my call from the watch, it stays on the watch, if i turn bluetooth off and back on its on the bluetooth headset
if I initiae my call from a bluetooth headset, it stays on the headset.
ByteFax said:
Same with headset ..
if I initiate my call from the phone, it stays on the phone.
If I initiate my call from the watch, it stays on the watch, if i turn bluetooth off and back on its on the bluetooth headset
if I initiae my call from a bluetooth headset, it stays on the headset.
Click to expand...
Click to collapse
Hi, I'm considering on buying galaxy gear
So what if I pair galaxy gear and bluetooth headset simultaneously on Note3
If I initiate my call from phone, Can I talk on bluetooth headset right away or do I have to do something on gear first?
and if I have incoming call, Can I push the answer button on my bluetooth headset and have a conversation or do I have to answer from the gear and transfer to my bluetooth headset?
Really need to know these information before deciding whether to purchase or not.
Many Thanks in advance
I have my Gear arriving shortly but I like to use a Bluetooth headset in the house if other people are about. Can the Gear and a headset coexist ok? Can I select which one takes the call etc?
I have gear and hands free built-in in a car sound system. Everything work perfect so far - call goes there where I picked it up
Thanks Potahov, that sounds ideal
Hi
I was just wondering if this, or any other smartwatch, can be used in conjunction with bluetooth headphones? Or can only one bluetooth device be connected to phone at the same time?
This could prove to be a massive dealbreaker for me.
Cheers for any info
Good question as I have a set of Motorola Bluetooth headphones.
Ian B
I could swear that I read somewhere someone has a note 3 paired with a gear and using some Bluetooth headphones. I believe they claim they can user the controls on either the headphones and watch to make and receive calls. So, could use the watch to answer and would be using the Bluetooth headset for the mic and speaker.
Sent from my SM-N900P using xda app-developers app
I have been only able to connect my bt headset for music while the gear is set to phone audio. I really wish there was a way to disable that.
Sent from my SAMSUNG-SM-N900A using xda premium
I mean it doesn't really make much sense to not have that. Would be ideal being able to see who is ringing via the watch but speaking and listening via the headset.
That IMO is what it's all about. Not many people are wanting to talk into their watch and listen via a loudspeaker
fade2black101 said:
I mean it doesn't really make much sense to not have that. Would be ideal being able to see who is ringing via the watch but speaking and listening via the headset.
That IMO is what it's all about. Not many people are wanting to talk into their watch and listen via a loudspeaker
Click to expand...
Click to collapse
That is not possible except if you have a Note 3 or a Note 2 with the leaked 4.3 from Samsung
I have a Note 8 3g with I use as main phone-tablet during working days, 4.2.2, and acquired a gear. Everything (more or less....) was working except the handling of the bluetooth headset. It maybe related some software piece from Samusung included on the official 4.3.
I have seen the update on 4.3 plan and my device looks not included until maybe end of the year or early next January.... uff, sami, you are loosing a customer.
Finally, after test with 2 diferent gears, I have decided to acquire a sony smartwatch sw2 which works like a charm with the note 8 3g. You can imagine for me, using the tablet 8" as phone, that no possible without a bluetooth headset. The other option was to talk through the watch and it looks stupid and no possible to have confidentiality in the calls.....
fade2black101 said:
Hi
I was just wondering if this, or any other smartwatch, can be used in conjunction with bluetooth headphones? Or can only one bluetooth device be connected to phone at the same time?
This could prove to be a massive dealbreaker for me.
Cheers for any info
Click to expand...
Click to collapse
I used my LG Tones+ headset to pair up while my watch was also paired. It does work, but I had to press a button on my headset to let it know to go to that device. By pressing the headset button while in the call, the watch picked up the phone call first, then I pressed a button on my Tones headset to get it over to that. By answering the the Tones headset, it goes straight there.
alprazolam said:
I used my LG Tones+ headset to pair up while my watch was also paired. It does work, but I had to press a button on my headset to let it know to go to that device. By pressing the headset button while in the call, the watch picked up the phone call first, then I pressed a button on my Tones headset to get it over to that. By answering the the Tones headset, it goes straight there.
Click to expand...
Click to collapse
What phone and android version do you have?
Ok well its good to know it can work.. I will wait until my Note II gets updated and see if the agent smartwatch/gear 2 have to offer before I decide.
In no rush but I'll probably get a smartwatch at some point. I just don't want it to affect usage of my bluebuds x bluetooth earphones.
On my N3 I have both a Gear and my car stereo blue toothed at the same time. All works fine.
Sent from my SM-N900T using Tapatalk
beginner said:
What phone and android version do you have?
Click to expand...
Click to collapse
Verizon Note 3 with stock 4.3.
stang9779 said:
On my N3 I have both a Gear and my car stereo blue toothed at the same time. All works fine.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
This. I forgot about this. I have Ford Sync and it works fine as well. I answer texts using S Voice on my watch and still make phone calls over Sync.
I am using the Gear in combination with a Note 3 and a Pair of Sony MDR-1RBT's and they work flawlessly. The Gear doesn't interfere with Bluetooth Audio on the phone.
fade2black101 said:
I mean it doesn't really make much sense to not have that. Would be ideal being able to see who is ringing via the watch but speaking and listening via the headset.
That IMO is what it's all about. Not many people are wanting to talk into their watch and listen via a loudspeaker
Click to expand...
Click to collapse
Hi,
IF this is the case why spend a fortune on the gear and not make use of its potential? Why not purchase the new Sony 11? That would give you the notifications you require plus the ability to use a BT head set?
Just a thought.
Ryland Johnson said:
Hi,
IF this is the case why spend a fortune on the gear and not make use of its potential? Why not purchase the new Sony 11? That would give you the notifications you require plus the ability to use a BT head set?
Just a thought.
Click to expand...
Click to collapse
I don't think its very feasible for the vast majority of people to use the watch as a loudspeaker/phone for privacy issues + annoying everyone else.
I wasn't planning on getting the gear anyway as I don't think it's a good buy. (Given its price). I plan to wait until the gear 2 or agent smartwatch arrive. It would also be nice to also be able to use it see change tracks, view album art/info for music too while listening to music through bluetooth earphones too.
In essence, I don't agree that being forced to speak to the watch on loudspeaker in front of everyone is using the watch to its potential. I find this more a massive drawback than a positive. Being able to use my earphones to listen is, IMO, the full potential.
Hopefully this will be the case with all these watches, as it is the most logical.
It works for me now. The gear and my BT works now since I got back on to MI9 firmware
Sent from my SAMSUNG-SM-N900A using xda premium
sliblue said:
I am using the Gear in combination with a Note 3 and a Pair of Sony MDR-1RBT's and they work flawlessly. The Gear doesn't interfere with Bluetooth Audio on the phone.
Click to expand...
Click to collapse
Hey There - I have the Sony SW 2, but was thinking of selling it to get the Gear, my question is how do you pair both the smartwatch and bluetooth to work simultaneously (to have the ability to use the watch to screen calls, and the headset to answer calls)?
Thanks
Teczguru said:
Hey There - I have the Sony SW 2, but was thinking of selling it to get the Gear, my question is how do you pair both the smartwatch and bluetooth to work simultaneously (to have the ability to use the watch to screen calls, and the headset to answer calls)?
Thanks
Click to expand...
Click to collapse
I use the set of NOTE3 + MW600 + Gear - so far it works fine.
However - I have MW1 headset and .... it does not work with NOTE 3 - each time You start the phone call it is necessary to manually activate "headset" on the phone!
alprazolam said:
Verizon Note 3 with stock 4.3.
This. I forgot about this. I have Ford Sync and it works fine as well. I answer texts using S Voice on my watch and still make phone calls over Sync.
Click to expand...
Click to collapse
What year sync do you have? I have a 2009 Sync and mine disconnects Sync from phone audio whenever I try to make a call. Reconnecting works for 5 seconds then disconnects. Even after disconnecting the gear from bluetooth, sync is still doing this now.
I am wondering if i can use the Galaxy S as a standalone after pairing it with my N4. I would like to use a bluetooth headset paired with the watch so i don't have to use the speaker mode. IS that possible? Has anyone tried this?
On GV09 the BT headset works
fade2black101 said:
Hi
I was just wondering if this, or any other smartwatch, can be used in conjunction with bluetooth headphones? Or can only one bluetooth device be connected to phone at the same time?
This could prove to be a massive dealbreaker for me.
Cheers for any info
Click to expand...
Click to collapse
On the chinese GV09s / (U8 ?) phone, you can successfully connect a BT headset directly
In BT dialer, you can select 'new device' and next put your BT headset in pairing.
The BT headset can be used for 'local music', (SIM) direct phone, radio etcetera. It works nice
Although my car shows my phone connected when I drive, while I am wearing the gear, any calls are routed through the gear.
I know it has to do with probably only one device can output the calls, but is there any way to go around this ?
Is there a quick way to disconnect the gear from the phone while in the car ? it's just that it's a lot of steps to get into the settings....
Was looking for something simpler and quicker.
Although it would be cool not to actually have it disconnected as I still like to see the notifications without pulling out the phone.
Anyone else with this issue ? Any suggestions...?
Only other thing I thought of is to find a software that would put me a toggle on the screen maybe ?
Thanks
No problems here. The phone call well get route through whatever device accepts the call
_____
Sent from my Samsung Galaxy Tab 8.9 i7310
Elgreco333 said:
Although my car shows my phone connected when I drive, while I am wearing the gear, any calls are routed through the gear.
I know it has to do with probably only one device can output the calls, but is there any way to go around this ?
Is there a quick way to disconnect the gear from the phone while in the car ? it's just that it's a lot of steps to get into the settings....
Was looking for something simpler and quicker.
Although it would be cool not to actually have it disconnected as I still like to see the notifications without pulling out the phone.
Anyone else with this issue ? Any suggestions...?
Only other thing I thought of is to find a software that would put me a toggle on the screen maybe ?
Thanks
Click to expand...
Click to collapse
my note 3 connect to the car when i get in and when i receive a call it rings on all 3 then i can chose the call from the car with no problem
I am using ans S4 and still waiting for the 4.3 update....
da0ne said:
my note 3 connect to the car when i get in and when i receive a call it rings on all 3 then i can chose the call from the car with no problem
Click to expand...
Click to collapse
Same here.
Car has inbuilt blue tooth, if I accept via the car, it routes through the car.
I also have no problems. The interesting thing is, I can initiate a call on the gear, and it stays there for about one second, then transfers to the car speakers. Which is where I want it anyway.
I have the same issue on Tmobile S4 4.2, I believe the 4.3 update has different profiles that allow this. Right now I'm stuck to connecting to the Gear or a Headset, I have to choose between the two since they both connect as 'phone audio' under BT settings. Once 4.3 is release in 2018 (LOL) it should be resolved.
I have a similar problem...or worst
My camaro '12, uses 2 BT profiles. One for media audio and the other for phone audio, since the gear also connects to my GS4 using phone audio, my cámaro's infotainment screen frozes until I disconnect the GG to my GS4 or the cars phone audio to my GS4.
I can't even chance the damn A/C temp or speed when that happens. Hahaha
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
alfmetal said:
I have a similar problem...or worst
My camaro '12, uses 2 BT profiles. One for media audio and the other for phone audio, since the gear also connects to my GS4 using phone audio, my cámaro's infotainment screen frozes until I disconnect the GG to my GS4 or the cars phone audio to my GS4.
I can't even chance the damn A/C temp or speed when that happens. Hahaha
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Your real problem is that you drive a 2012 Camaro. LOL.
my wife says she wants to meet you....theres a big ass kitchen knife in her hand, tho lol. jk
I have connected my LG G3 to the galaxy gear Samsung gear 1.
Everything is fine except that I cannot use both gear and bluetooth connection in my car, whereas, if I am using my Note 3 there is no problem in connecting both.
Wondering if there is a solution so that I can connect both bluetooth and gear to my 3G in my car
I have the same issues. I have a lg g3, galaxy gear 1, and bt headset. If the gear is connected, calls go to gear and not the headset.
When I had my galaxy s5 all was fine.
Anyone have ideas?
*****************************************************
Something else I noticed, it may only happen to others with a lg g3, but if the watch is on and paired, the headphone jack doesn't work.
bloodylipp said:
I have the same issues. I have a lg g3, galaxy gear 1, and bt headset. If the gear is connected, calls go to gear and not the headset.
When I had my galaxy s5 all was fine.
Anyone have ideas?
*****************************************************
Something else I noticed, it may only happen to others with a lg g3, but if the watch is on and paired, the headphone jack doesn't work.
Click to expand...
Click to collapse
I don't have a g3 (yet) to test but I think using SQL lite editor and modifying settings.db under the settings app, you can adjust bluetooth priorities. By default priorities are all set to 100. I think if you changed the gear's priority to 99, it may work.
Artimis said:
I don't have a g3 (yet) to test but I think using SQL lite editor and modifying settings.db under the settings app, you can adjust bluetooth priorities. By default priorities are all set to 100. I think if you changed the gear's priority to 99, it may work.
Click to expand...
Click to collapse
That may be over my head to an extent.
If it was laid out I could do that. But I've never used sql. I just tried and failed pretty bad.
bloodylipp said:
That may be over my head to an extent.
If it was laid out I could do that. But I've never used sql. I just tried and failed pretty bad.
Click to expand...
Click to collapse
Ok, I'll try to break it down. Hopefully, it works:
1) Get SQLite editor (sounds like you already have it)
2) Scroll down to "Settings Storage" and then select "settings.db"
3) Select global
4) find the entry "bluetooth_headset_priority_<MAC address of Gear>" and select it
5) Click menu > edit record
6) Change the priority from 100 to 99 and save
Hopefully, it helps. Let us know.
Artimis said:
Ok, I'll try to break it down. Hopefully, it works:
1) Get SQLite editor (sounds like you already have it)
2) Scroll down to "Settings Storage" and then select "settings.db"
3) Select global
4) find the entry "bluetooth_headset_priority_<MAC address of Gear>" and select it
5) Click menu > edit record
6) Change the priority from 100 to 99 and save
Hopefully, it helps. Let us know.
Click to expand...
Click to collapse
It is set at -1 out of the box. What should I try changing it to?
bloodylipp said:
It is set at -1 out of the box. What should I try changing it to?
Click to expand...
Click to collapse
Not sure. I would try setting both the gear and your headset to a positive integer and make sure the headset is set higher and see what happens. Not sure if this will work or not but it can't hurt to try.
Try todo rename tour bt headset oer car device the bt device must be on the top and gala y gear under them
Enviado desde mi SGH-I337M mediante Tapatalk
I was able to use an app called Bluetooth Auto Connect to set the priority of my Bluetooth devices so when I get in my car it connects to the in car Bluetooth and reconnects to the gear after
jrodd77 said:
I was able to use an app called Bluetooth Auto Connect to set the priority of my Bluetooth devices so when I get in my car it connects to the in car Bluetooth and reconnects to the gear after
Click to expand...
Click to collapse
I've setup Trigger profiles to do exactly this back when I was on 4.1.2 since multiple devices can't be connected at the same time on that version. From Android 4.3+, multiple BT devices can be connected at the same time and I thought it was at the OS level where the system would use whichever devices answers the call...... I guess it is a function of the Samsung dialer after all.
Anyone has any idea, why if you go outside the phones range GEAR disconnects, but when you come back it does not want to connect automaticly.
I mean this watch got to get a update soon. with all the problems and lack of software.
OK, maybe I got it.
If you go to Bluetooth settings and click GEAR, you got the choose:
-automatic connection
-ask me every time.
So automatic will be.
But I will not test it, because I already put it on local ebay for 199 eur.
PROBLEMS that Samsung has to fix, or the hell with them:
-controlling music via gear to your phone
-giving the option that gear connects to your phone only with the connection and not with the media. (can not use BT ear set to listen to music) like pebble
-automatic disabling the screen when you go to sleep mode
-giving the alarm in the gear directly and not over the phone
-when answering a phone call with the phone and not the gear, sound comes from the phone instead on the gear (this is the stupid thing ever. I answer the phone and people scream on my wrist)
this is the list witch i can not live without, so come quickly my moto 360.
cvenk said:
-giving the option that gear connects to your phone only with the connection and not with the media. (can not use BT ear set to listen to music) like pebble
-when answering a phone call with the phone and not the gear, sound comes from the phone instead on the gear (this is the stupid thing ever. I answer the phone and people scream on my wrist)
Click to expand...
Click to collapse
These two have me confused by exactly what you mean. Obviously you are getting rid of it, im more just curious if im understanding correctly.
I have a BT headset connected and have listened to music directly from my Neo while its still connected to my phone, is this not what you mean?
And when i answer a call from my phone, it comes through my phone, so i am confused by this one as well.
cloudraker said:
These two have me confused by exactly what you mean. Obviously you are getting rid of it, im more just curious if im understanding correctly.
I have a BT headset connected and have listened to music directly from my Neo while its still connected to my phone, is this not what you mean?
And when i answer a call from my phone, it comes through my phone, so i am confused by this one as well.
Click to expand...
Click to collapse
WHAT I meant:
I. example
1 (pebble , phone, BT headset)
All are connected, I can listen to my music which is on my phone, control it via pebble (volume up/down, next song pause....) and listen on my BT headset (BEATGO2)
2. (GEAR and BT Headset)
OK, you can only have 2,4 GB of music on GEAR (for the first time is OK, but I'm not gona change all the time my music collection
I connect BT headset via GEAR and listen to music.
3. (Not possible)
My GEAR connects to my phone. Now I want to listen to my music and put my BT headset. I connect my BT headset and my GEAR immediately disconnects.
Now I can not control my music via GEAR but via BT headset and I don't have GEAR ONLINE so it suxs. And after music, I have to manually connect my GEAR to my phone, and than my BT headset disconnects.
II. example
My gear is connected to my phone (which is the main part of the smart watch).
I got a call. I quickly pull out my phone and answer the phone. I start talking on my phone, but sound is coming not through my phone , but through my GEAR.
Microphone and speaker are on GEAR, I have to click BT speaker OFF on my PHONE to talk through my phone. EVERY TIME. And I don't like to talk all the time over GEAR, In crowded places NO GO.
I wanted to disconnect PHONE functions on my BT setting on my GEAR connection, but there is not a possibility. If i just click anything on GEAR , it just disconnects.
And I will not click every time that i have a call. First ANSWER that quickly BT disconnect,.(it is just stupid)
I hope you all have a good picture of the problem.
Am I missing something in setting or what.
OK, I don't have Samsung phone , I have LG G2, but any case It shouldn't do this.
Im guessing the phone call thing happens to be a downfall of not using a TW device? Seems maybe the phone sees the watch as a headset and tries communicating that way? just a theory.
I think your issue is using a non Samsung phone and thinking a device that's only officially compatible with Samsung phone's will and should work fully.
And finally what gets me angry is people not reading what a device can do BEFORE buying it! If you don't then the only person to blame is yourself and not the company.
Sent from my SM-G900F using XDA Premium 4 mobile app
jongilluley said:
I think your issue is using a non Samsung phone and thinking a device that's only officially compatible with Samsung phone's will and should work fully.
And finally what gets me angry is people not reading what a device can do BEFORE buying it! If you don't then the only person to blame is yourself and not the company.
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
why, I know it's not compatible, And I know it works... but this are the small problems, that no one knows before you try. I would go in one minut to SGS4 but I love my G2 and no Samsung for me. Been there done that.
So thanks for the info, than on Samsung phone, calls work.
We are one step closer.
Still I don't know if I'm gona sell it. I put 200 eur so in other way I'm gona wait for the update and work it than. (I like this watch... but...)
I have no option on my z1 for automatic reconnect, and have same trouble when getting out of range, the gear never reconnect unless I toggle bluetooth off and on ( on watch or on phone) or clicking connect in gear manager. Must be a drawback for not using samsung phone as it works with my bluetooth headset.
Call works perfectly though.
If your on a phone that says auto reconnect make sure you hit it, I had to test it with my wife's phone just to make sure it worked properly....If you have a Samsung phone it will auto this for you.....If you have a phone that doesn't have either feature ask your manufacturer about it or ask about it the Q&A section of XDA in device category to see how activate this feature.
Sent from my SM-N900W8 using xda app-developers app
i have problem reconnect too, i'm using s4 zoom and every time my gear is getting back to range its not reconnecting.
i have 4.2.2, dont have the option auto connect in bluetooth settings.
any ideas?