[CLOSED] Unable to Update MaximusHD 32.0.0 to 33.0.0 - One (M7) Q&A, Help & Troubleshooting

I am unable update my HTC One with MaximusHD 32.0.0 to 33.0.0. I have TWRP 2.6.3.3 and I am trying to flash the OTA 32.0.0-33.0.0 zip, but my phone reboots before the installation completes. The whole aroma installer process works, it gets me to choose a language and select a mod, but when it gets to the screen that says the process of the installation, it reboots. It stays at 0%, then just turns on without me touching anything. Does anyone know what I can do? I want to update it to the newest version, but I don't want to wipe my device. Thanks in advance.
Here is the link to the custom ROM: http://forum.xda-developers.com/showthread.php?t=2189373
*EDIT* I was finally able to figure out how to update my ROM without wiping my device. I just had to download the MaximusHD 33.0.0 zip that wasn't an OTA one and it gave me an option to update only and not wipe the device.

Related

looping on "unforunately system ui has stopped"

So today I received a XT 1056. I then proceeded to unlock the bootloader and flash SU.
So I then tried flashing a CM 12 nightly build and all went well. I was able to setup the device until the screen was locked and then the phone instantly starts looping through the "Unfortunately, system UI has stopped." error. I've tried flashing an older version of the ROM, and I've tried numerous other 5.0 ROM's but each one will crash as soon as the screen is locked.
And it would not seem like a great idea to revert to an older version of Android and risk bricking the device.
So if someone could advise me how to get rid of the loop error it would be much appreciated.
I have TWRP 2.8.3 currently flashed if that makes any sort of difference....
Install the gApps...
690sid said:
Install the gApps...
Click to expand...
Click to collapse
I tried a fresh install of this CM12 with the gapps it says to use and once again I can setup the phone and as soon I get to the home screen the system UI loop happens. http://forum.xda-developers.com/moto-x/development/rom-unofficial-nightly-lollipop-5-0-t2960768
I also saw your post in that thread to try flashing with these instructions, but it still has the same error.
1 - Download an earlier version of the ROM that booted on you phone along with the gapps.
2 - Flash the ROM and gapps with a suitable recovery... CWM or TWRP 2.6.
3 - Download the latest release that you want to install.
4 - Flash the latest release over the pre - installed ROM without wiping anything.
Is it possible to just flash 4.4.4 or do I risk bricking the device?

can't install new update

hey!
my watch tries to install the new 1.1.3 update, but once the device reboot it goes to twrp and it won't install anything.
is there any way of installing it? or does the only option is to flash the original recovery and then update?
thanks!

One Plus 3 T - Build Update 28_170324 - Update Question

Hello Community,
I am using a custom recovery (TWRP) and my phone is rooted. Can I update this build update in an official way (like in the picture) or do I need to flash a complete ROM? And if I need to flash a complete ROM, has someone the ROM from the new build update? Wasn't able to find it until now.
Sincerely PIPT
You need to do some reading before trying anything more, because you're likely to brick your phone and then you'll really be in trouble.
Yes, you can download and apply updates without having your data wiped and starting from scratch, but there's a very specific process to do this. Failing to follow the proper steps will result in a bricked device. Save yourself some trouble, and learn more about what you're doing before you make a mistake that you can't fix.
I had the same situation as you. I first tried update with OTA, it downloaded and rebooted and failed.
When it booted again, and ran the OTA updater it downloaded the full ROM package, rebooted and installed fine in twrp.
You should flash full rom over your system like dirty flash, just wipe dalvik and cache after flashing completed, then reboot.
This is safe way if you have root and twrp
Keep in your mind you will lose root and twrp after upgraded, flash them again ?
chazarss said:
You should flash full rom over your system like dirty flash, just wipe dalvik and cache after flashing completed, then reboot.
This is safe way if you have root and twrp
Keep in your mind you will lose root and twrp after upgraded, flash them again
Click to expand...
Click to collapse
You also have to flash supersu after dirty flashing the rom. Also I personally wipe Dalvik and cache before flashing the rom. I've never had any issues with the procedure I follow.
---------- Post added at 17:19 ---------- Previous post was at 17:17 ----------
olskar said:
I had the same situation as you. I first tried update with OTA, it downloaded and rebooted and failed.
When it booted again, and ran the OTA updater it downloaded the full ROM package, rebooted and installed fine in twrp.
Click to expand...
Click to collapse
If you have a custom recovery or you're rooted never install an OTA. you need to have official recovery to install an OTA. Dirty flashing the full rom is the best way to update.
PIPT said:
I am using a custom recovery (TWRP) and my phone is rooted. Can I update this build update in an official way (like in the picture) or do I need to flash a complete ROM? And if I need to flash a complete ROM, has someone the ROM from the new build update?
Click to expand...
Click to collapse
See here: https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
In addition to the needed files, the thread has detailed instructions on how to update (stock phone vs. rooted with TWRP) in Post #3 of the thread.
Based on this, you must flash the full ROM zip (as opposed to the partial OTA "patch"), if you are rooted. But you should still be able keep your data. But I would still back up what is important to you, before updating. Just common sense to have your important data backed up, especially before large OS updates.
I'm actually about to do this myself today (rooted OOS 4.0.3 to 4.1.1), so I'll let you know how that goes.
bonham1988 said:
If you have a custom recovery or you're rooted never install an OTA. you need to have official recovery to install an OTA. Dirty flashing the full rom is the best way to update.
Click to expand...
Click to collapse
You can flash full OTA packages through TWRP. You can't flash the smaller patches, but if it's the full firmware, then TWRP 3.0.4.1 will work just fine. Just be sure to flash SuperSU or Magisk before booting to retain root.
redpoint73 said:
See here: https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
In addition to the needed files, the thread has detailed instructions on how to update (stock phone vs. rooted with TWRP) in Post #3 of the thread.
Based on this, you must flash the full ROM zip (as opposed to the partial OTA "patch"), if you are rooted. But you should still be able keep your data. But I would still back up what is important to you, before updating. Just common sense to have your important data backed up, especially before large OS updates.
I'm actually about to do this myself today (rooted OOS 4.0.3 to 4.1.1), so I'll let you know how that goes.
Click to expand...
Click to collapse
Can I install stock recovery too to make OTA updates and then after the update install TWRP and flash root again? I only ask because I want to do the smaller updates (bug fixes and improvements) too and won't wait for OS and Firmware updates to update my build, because not every little update is listed to get installed manually.
But all in all thx for so many answers
I updated officially with stock recovery and full it's zip, DM Verity has been triggered. It's annoying, anyone else?
edit: fixed it, still annoying that a stock rom tripped it tho.

[Q] how to update after rooting (magisk) ?

Hello
I was on B180 (PRA-LX1C432) rooted with magisk
No updates available in settings/update firmware, but connecting to PC HiSuite B194 appeared (which seems to be for Honor 8 lite by the way). It downloaded it, pushed it to phe phone, but when rebooting it goes to twrp... so obviously I'm still on B180
I imagine we have to flash back stock recovery before updating ? And then twrp again, magisk flash, etc ?
Thanks !
About OTA over magisk I found that on P9 forum:
1) unroot by Magisk Uninstaller, find the download link in the post https://forum.xda-developers.com/sho...63&postcount=1
2) flash from TWRP original stock boot img
3) wipe Dalwik and Cache from TWRP
3) flash from fastboot original stock recovery
4) let it make OTA update but select in the System Update settings to use Full (not differential) update - it will not delete your apps and settings
maybe the safest way indeed...
But as I "catch" the full ota, maybe I can use fastboot to flash only system and boot, and the reflash magisk to patch new boot img ?
anyone ?
Nobody updated after root ??
Ok, this is what I did and happened:
- In TWRP, flash magisk uninstaller script: ERROR 1. After reboot magisk was still here. That was a bad start...
- So I opened magisk app, click Uninstall and then Complete Uninstall. After that I made a reboot as asked, and device rebooted twice.
- Then, went to download mode and flashed stock recovery. And reboot.
- Then went to settings/updates/download latest full ota. It downloaded but refused to start the install process claiming to free up more than 900MB... Nothing on my internal sdcard so I had to uninstall some apps... cool !
- Then it reboot and installed the update
- First boot took a while, I still have "this device cannot be trusted" on start, and OEM unlock in settings is grayed and ON, so I think the bootloader is still unlocked
- Theme and wallpapers were reset with the update
For now I don't have flashed back twrp neither magisk .
In the meantime have you flashed TRWP and Migistik ? And again: do you have still to update your signature or something went wrong in installing fw B194.
Lastly: what do you mean by "went to download mode and flashed"...

[GUIDE] OTA on TWRP

i saw an update on Redmi Note 8T (11.0.9).
I'm rooted with TWRP, so I just tried to update. New update was downloaded into directory downloaded_rom.
phone was automatically rebooted into TWRP, but I didnt know there is update in that directory. I just rebooted device into system.
I got a message that update failed. I click update and started to look for file/folder created during download process. So i discovered directory downloaded_rom in root folder.
phone was automatically rebooted into recovery (twrp) and it was flashing update without my help.
after reboot, device was updated. the only thing to do was flash TWRP (i have paid version of TWRP) and flash magisk.
everything works fine and my phone is rooted on 11.0.9.
i thing, that second file was whole ROM (1.9GB)
in my personal experience, if you get rebood to twrp, flash Disable Dm Verity ForceEncrypt to boot into rom
title
Was Magisk installed before the update? Since you are saying it rebooted to TWRP without you knowing, were you able to restore stock images before updating? Could you also provide information concerning the update? For example, miui version (updating from vXXX to vXXX)
jjsan said:
i saw an update on Redmi Note 8T (11.0.9).
I'm rooted with TWRP, so I just tried to update. New update was downloaded into directory downloaded_rom.
phone was automatically rebooted into TWRP, but I didnt know there is update in that directory. I just rebooted device into system.
I got a message that update failed. I click update and started to look for file/folder created during download process. So i discovered directory downloaded_rom in root folder.
phone was automatically rebooted into recovery (twrp) and it was flashing update without my help.
after reboot, device was updated. the only thing to do was flash TWRP (i have paid version of TWRP) and flash magisk.
everything works fine and my phone is rooted on 11.0.9.
i thing, that second file was whole ROM (1.9GB)
Click to expand...
Click to collapse
Was Magisk installed before the update? - yes, device was rooted, with Magisk installed
were you able to restore stock images before updating - dont understand this, after downloading update and clicking on install, device was rebooted into twrp
miui version (updating from vXXX to vXXX) - update from 11.0.7.0 to 11.0.9.0
jjsan said:
Was Magisk installed before the update? - yes, device was rooted, with Magisk installed
were you able to restore stock images before updating - dont understand this, after downloading update and clicking on install, device was rebooted into twrp
miui version (updating from vXXX to vXXX) - update from 11.0.7.0 to 11.0.9.0
Click to expand...
Click to collapse
What I meant was whether you uninstalled Magisk/restored original boot img prior to the update because sometimes not doing so tends to result in bootloop (happened to me before). I needed some information before I attempt the update myself. Thank you for replying.
P.S. One more question: All data was preserved, right?

Categories

Resources