-----------<Here is the procedure to activate second core or Another Cores>-----------
In Laptop/Desktop
--> go to < control panal.
--> go to < Administrative Tools
--> go to < choose -- System configuration
--> now a Dialog BOX Appear < then
--> go to < Boot <2nd Option On Top
--> Now Choose < Advanced Option On boot
--> Then u see no. of Processor at original state only
--> 1 core used
--> Tick on number of Procesor 2nd choose 2 (Processor).
--> Then Ok and Apply < ok.
--> YOU see a small box < RESTART.
NOTE -
As I Think My PC has Dual Core Processor. I Only Find 1 Core Working In My PC And My PC Has Only 1 GB RAM. SO,1GB RAM For 1 Core.
If You Enable Second Core You Need 1GB More RAM To Work your system well. If You Use 2 Core IN 1 GB RAM Your System Becomes Slow...! Observed
!!!! GUD LUCK !!!
Credits - To Me Kartik [email protected]
Related
Im using the the stock WM 6.1.
Is there any possible way of using whatsapp? I just need whatsapp, im totally fine with the stock os.
I have been through so many of the android development threads, and i realized that there is no android rom that is completely stable and gives it a good battery life.
Hasn't anyone been able to get whatsapp on x1, without moving to android?
ajmaeen said:
Im using the the stock WM 6.1.
Is there any possible way of using whatsapp? I just need whatsapp, im totally fine with the stock os.
I have been through so many of the android development threads, and i realized that there is no android rom that is completely stable and gives it a good battery life.
Hasn't anyone been able to get whatsapp on x1, without moving to android?
Click to expand...
Click to collapse
not possible. The Whatsapp app is not available for WinMo. You have to flash Android or buy/use a phone which is supported.
Ok.
but which android rom would you recommend.
Im not much into android games and stuff. I just want the phone features like, camera, music, video, wifi, bluetooth, email, gps, etc..... not the other fancy stuff.
Any android version. i dont mind if its 2.1, 2.2, or 2.3.... It should just be stable and give me a reasonable battery life.
ajmaeen said:
Ok.
but which android rom would you recommend.
Im not much into android games and stuff. I just want the phone features like, camera, music, video, wifi, bluetooth, email, gps, etc..... not the other fancy stuff.
Any android version. i dont mind if its 2.1, 2.2, or 2.3.... It should just be stable and give me a reasonable battery life.
Click to expand...
Click to collapse
there isn't any Android ROM with everythink working, there is not working: camera, wifi, gps, fm radio and maybe problems with video but I don't know
You could look at IceDroid ROM but with every ROM there is no Camera, wifi, gps and fm radio
ajmaeen said:
Ok.
but which android rom would you recommend.
Im not much into android games and stuff. I just want the phone features like, camera, music, video, wifi, bluetooth, email, gps, etc..... not the other fancy stuff.
Any android version. i dont mind if its 2.1, 2.2, or 2.3.... It should just be stable and give me a reasonable battery life.
Click to expand...
Click to collapse
i have x1 and i had the same problem so i recommend to use this rom
http://forum.xda-developers.com/showthread.php?t=1267166
very nice very easy to use and you will still have your windows mobile and you can boot in android any time you want
---------- Post added at 12:17 PM ---------- Previous post was at 12:02 PM ----------
here is the instructions
01. Remove the SIM card till the installation will finish.
On your pc Split the SDcard with Minitool Partition manager http://www.partitionwizard.com/download.html
into 4 partitions (it’s important to set the partitions as PRIMARY):
---> 1st partition: FAT32 (SDcard / Rest)
---> 2nd partition: EXT3 (System / about 250 MB)
---> 3rd partition: EXT3 (Data / about 450 MB)
---> 4th partition: EXT3 (Cache / about 100 MB)
2. Extract the Package then copy [npkboot] folder to root of SDcard
3. Copy [SenseDroid X (EXT3).zip] to root of SDcard without extraction
4. Run Haret and wait until the screen show 'Press Volume Down shortly To Launch ClockworkMod Recovery', press Volume Down button
5. While In Recovery menu, choose " install zip from SD card >> choose zip from sdcard >> select 'SenseDroid X (EXT3).zip'
6. After finish installing the build, return to main menu >> Reboot phone
Run Haret again now will open your android
01. Go to “Settings > Wireless and Network > Mobile Networks>”, uncheck “Data Enabled” (very important).
02. Go to “Settings > Wireless and Network >”, turn on the Bluetooth and wait till the phone detect any other Bluetooth Device (very important).
03. Go to “Settings > Location & Security >”, check “Use wireless networks” so that you can use your GPS.
04. Go to “Settings > Location & Security > Set up screen lock > Pattern”. So, you avoid the noisy locked screen vibration.
05. Go to “Settings > Display > Brightness >" and adjust a different brightness of the screen. So, you avoid the light on function keys when X1 is in standby. For better performance disable "auto-rotate screen" and "animations", too.
06. Launch Load Monitor app, go to “Menu > Preference >” and enable “Add Notification, Only notify high load, Auto start, Update interval 30 min., Wake lock”.
07. Press Phone button and choose GoDialer as default app (fix phone call problems, credits to casualt).
08. And reboot your phone.
Second reboot (GAPPS installation):
01. Download “SenseDroid GAPPS.zip”
02. Run “haret.exe” again, go into CWM Recovery, choose "install zip from SD card > choose zip from sdcard >", select "SenseDroid GAPPS.zip".
03. After finish install, reboot phone.
04. Run “haret.exe” again and leave it to continue booting into Android.
05. Now "clear Market data" and "uninstall updates" (Setting > Application > Manage applications > Market). After that disable Market Updater:
---> Install TerminalEmulator.apk (included in the bundle).
---> Type the following command in the terminal emulator:
---> su *PRESS ENTER*
---> pm disable com.android.vending.updater *PRESS ENTER AGAIN*
06. And reboot and run haret.exe again. That's all.
here is the links
http://www.filefactory.com/file/c3e72e7/n/SenseDroid_X_EXT3_Package.7z
http://forum.xda-developers.com/showpost.php?p=17654147&postcount=2
Thanks to
jerrytan93
Al Credits Goes TO Perceval from Hyrule
Perceval from Hyrule said:
** Currently writing this, please wait !
Hello there,
here is a new tutorial I'm sure you'll like. As usual it took me LOTS of work to get all info and make this to work, so now I share it with you and show how to run custom ROMs within Android SDK Emulator.
Please note it's mainly for XPERIA X10, but process is the same for other Android-powered devices. It will show you the process for Linux.
1. Download the latest Android SDK.
2. Open the archive, and copy the folder android-sdk-linux-x86 to a safe place. You can also rename it to an easier name. Example : I placed it in ~/Home and renamed it androidsdk.
3. Go to the SDK folder, then in the folder Tools/. Double-click on Android and choose Run.
4. Go to Available packages, and choose to install (choose at your will !)
Android SDK Tools, revision 8
Android SDK Platform-tools, revision 1
SDK Platform Android {VERSION(S) YOU WANT} (!) You need at least one Platform. For X10, you can download 1.6, 2.1. You can also add 2.2, 2.3.
Once it's done, close the window.
5. Download Xperia X10 add-on for SDK. (?) Read the PDF add-on guide, it is helpful !
Copy the folder (from the archive) XPERIA-X10_r1 inside the folder add-ons of your Android SDK folder ({androidsdk}/add-ons/).
6. Run terminal, go to your Android SDK folder, then in tools folder, and run
Code:
./android list target
.
Note the id number of the Android you want to develop (ie for me, Android 2.3 is
Code:
id: 3 or "android-9"
). (?) You might also want to note the name ("android-X") as it might be useful later.
7. Now, create AVD (a profile for emulator). Usual command (assuming you are INSIDE the /tools/ folder !) is
Code:
android create avd -n NAMEYOUWANT -t {ID}
So, for us, it will be
Code:
./android create avd -n myx10 -t 3
8. To generate the AVD, you will be prompted several info. Type these for Xperia X10 :
Create custom hardware profile : yes
SD Card support : yes
Asbstracted LCD density : 160 (correct if I'm wrong ?)
DPad support : no (?)
Accelerometer : yes
Max camera pixels (H) : 3264
Cache partition size : 66 (?)
Audio playback : yes
Trackball : no (?)
Max cam pixels (V) : 2448
Camera support : yes
Battery support : yes
Touch screen : yes
Audio record : yes
GPS : yes
Cache partition : yes
Keyboard : no
heap size : 32
RAM : 280
GSM Modem : yes
(?) I recommend you to create one profile for each Android version you want to run (so : you just have to change the ID, and create same profile). If you don't, you won't be able to run custom ROMs using other versions of Android (ie your AVD profile is 2.3 and you run a 2.1 custom ROM).
9. Done ! Take your custom ROM (downloaded, compiled... In this case, files are in {YourAndroidRepoFolder}/out/target/product/generic/. It comes with about 3 files, including a file called system.img. Copy this file into the folder (hidden) .android/myx10{In fact, the name you've chosen earlier "NAMEYOUWANT"}.avd/
10. Run terminal, go to Android SDK folder/tools/ (if you didn't close your current terminal, you're already in and run this command to run emulator WITH your custom ROM :
Code:
./emulator -avd myx10{again the "NAMEYOUWANT" you've chosen before}
Wait and enjoy !
(?) First boot is long - it's NORMAL. Just like on a real device, the OS will be cached and will work faster and faster.
Click to expand...
Click to collapse
8. To generate the AVD, you will be prompted several info. Type these for Xperia X10 :
Create custom hardware profile : yes
SD Card support : yes
Asbstracted LCD density : 240
DPad support : no
Accelerometer : yes
Max camera pixels (H) : 3264
Cache partition size : 100
Audio playback : yes
Trackball : no
Max cam pixels (V) : 2448
Camera support : yes
Battery support : yes
Touch screen : yes
Audio record : yes
GPS : yes
Cache partition : yes
Keyboard : no
heap size : 64
RAM : 403
GSM Modem : yes
works with the LG O2X roms?
sjcunha said:
works with the LG O2X roms?
Click to expand...
Click to collapse
hasn't been tried yet
you can change ram setting by doing (or use command center or similar):
echo 1 > /sys/kernel/bigmem/enable (this gives you xl mem of 391 mb)
echo 2 > /sys/kernel/bigmem/enable (this gives you bm mem of 403 mb (this is breaking 720p))
echo 0 > /sys/kernel/bigmem/enable (this gives you cm9 default mem of 378 mb)
you have to reboot to make changes work
Click to expand...
Click to collapse
I do not understand this. I do?
Someone I can better explain the steps?
I want to use bigmem 403 mb.
PS: do not let me post in the original post. for being a noob.
Hi
- check if /data/local/devil folder is created, if not, make it.
- grab Command Center from Play Store.
- download "devil.json.zip" (page 480)
- remove the ".zip" from the name.
- put this file into /sdcard/Android/data/com.askven.commandcenter/files/
- open Command Center, menu, preferences, tick execute on tap.
- close it
- reboot.
- open CC. and hit "Devil"
- here you can set zRam hitting "2".
- reboot
- open Terminal Emulator and type "free", you should get values by "Swap.
Code:
http://forum.xda-developers.com/showthread.php?t=1445214&page=519
hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs
vardhan21 said:
hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs
Click to expand...
Click to collapse
1-download latest script
2-run v6supercharger.sh as root(not pdf file!)
It'll ask 3 or 4 questions & then you're done
3-reboot
Sent from my E15i using Tapatalk 2
vardhan21 said:
hi frnds how to use v6 supercharger script i tried but it shows normal ram memory 60.
k explain what i do
* Open script manager
* Click on v6_Supercharger_for_android-update**.pdf, a new window will appear just click on su(icon will now be green) and press Run
* Superuser request will come, press allow
* Now a lot of stuff will be written, at first you just have to press enter
* If you are smart enough you won't choose anything wrong, so go on until you see : Please Enter Option (1-31) --> you choose(write): 10
* Few moments later this will appear: Apply SuperMinFree Calculator Settings? --> you choose no (write: n )
* Now you'll see ,,Running Cust-OOMizer..'' and slot 1 will appear. Enter these values:
- Slot 1: 6
- Slot 2: 18
- Slot 3: 5
- Slot 4: 50
- Slot 5: 60
- Slot 6: 70
after that just press enter and wait
* When you see this: ,,Because I may SNAP and call you names! ;-] ''
but it does nt increase my ram memory ...plz help me
i used
rom-GINGERDX v 031b
kernel-Alfs
Click to expand...
Click to collapse
Use your brain & read OP of supercharger thread:banghead:
Sent from my X8
im using miniCM 2.0.7 stock kernel, can i apply this v6 supercharger?
@ Vardhan21
V6 supercharger wont increase your RAM!!!
RAM is a physical memory and cannot be increased by some scripts.
These scripts optimize the memory so that your RAM will be better managed by Android.
@ astig_king24
You can use v6 supercharger with any rom and any phone
Sent from my X8 using xda app-developers app
How am I supposed to install the necessary drivers if the phone only stays in fastboot for 5 seconds at the max? Using Windows 8 64-bit, if that makes a difference.
From what i have read Win 8 32/64 bit is problematic
I can't remember what it is you need to disable.
Sent from my C5303 using xda premium
zolaisugly said:
From what i have read Win 8 32/64 bit is problematic
I can't remember what it is you need to disable.
Sent from my C5303 using xda premium
Click to expand...
Click to collapse
I got the same issues with the drivers.
Go to here: http://forum.xda-developers.com/showthread.php?t=920746
Install the latest version
Then in Windows 8 > Mousepoint upperleft corner > settings > PC settings > General > Advanced reboot > Reboot now > Troubleshoot > Advanced options > Startup settings > Restart > Press F7
Go to C drive > Flashtool (should be on top of the list) > Drivers > Install > In list scroll down to bottom and select Fastboot and Flashmode drivers > Install (you will see warnings about signature issues install them anyway) > Reboot pc and you're done