Hello Guys. I really appreciate your help and dedication.
I spent a lot of time tryng fix my XT862. When I bought it, was working with Att. When I didn't have access to MY Contacts I install a new ROM but I can't make to work again.
The phone is unlock and rooted, v.5.7.906.xt863. the Baseband is N_03.18.29P but if I flash to "radio883", I get Baseband unknow .
I changed the build.prop 1 to 0 and 7 to 3.
Maybe my xt883 radio is not the correct one? Please help. Thanks
dbix said:
Hello Guys. I really appreciate your help and dedication.
I spent a lot of time tryng fix my XT862. When I bought it, was working with Att. When I didn't have access to MY Contacts I install a new ROM but I can't make to work again.
The phone is unlock and rooted, v.5.7.906.xt863. the Baseband is N_03.18.29P but if I flash to "radio883", I get Baseband unknow .
I changed the build.prop 1 to 0 and 7 to 3.
Maybe my xt883 radio is not the correct one? Please help. Thanks
Click to expand...
Click to collapse
you are using files from here Guide - Band Unlock XT862 for T-mobile/ATT
Help please. XT883 on XT862 not working
sd_shadow said:
you are using files from here Guide - Band Unlock XT862 for T-mobile/ATT
Click to expand...
Click to collapse
Thank you very much for your answer and help. On my Droid has MotoBlur 5.7.906. Do i have do restore to MotoBlur 5.6.890 OTA ? Thanks
dbix said:
Thank you very much for your answer and help. On my Droid has MotoBlur 5.7.906. Do i have do restore to MotoBlur 5.6.890 OTA ? Thanks
Click to expand...
Click to collapse
906 is fine.
xt862 help
sd_shadow said:
906 is fine.
Click to expand...
Click to collapse
I can't root with PetesMotorolaRootTools_v1.09 .and I get this message:
SEARCHING FOR THE PHONE (connect it now if you haven't yet)... found!
Running exploit step 1 of 3 (setting up symlink)... done!
Rebooting your phone... done!
Running exploit step 2 of 3 (modifying local.prop)... done!
Rebooting your phone... done!
Running exploit step 3 of 3 (adding su, busybox, and superuser.apk)... FAIL!
ERROR: adb could not be granted root access via local.prop method
Try again from the start, but if the problem continues, check your version
of Gingerbread -- hopefully you don't have a version where this exploit
was fixed.
I rooted with Motofail. The "Root Checker Advanced" show that the Droid is Rooted.
I tried again PetesMotorolaRootTools_v1.09 and I get the some massage from the top.
Is the Droid Rooted? I don't think so because I can't uninstall system apps. What I have do to please. thanks
pete's does not root 906, use motofail
xt862, radio help
dbix said:
I can't root with PetesMotorolaRootTools_v1.09 .and I get this message:
SEARCHING FOR THE PHONE (connect it now if you haven't yet)... found!
Running exploit step 1 of 3 (setting up symlink)... done!
Rebooting your phone... done!
Running exploit step 2 of 3 (modifying local.prop)... done!
Rebooting your phone... done!
Running exploit step 3 of 3 (adding su, busybox, and superuser.apk)... FAIL!
ERROR: adb could not be granted root access via local.prop method
Try again from the start, but if the problem continues, check your version
of Gingerbread -- hopefully you don't have a version where this exploit
was fixed.
I rooted with Motofail. The "Root Checker Advanced" show that the Droid is Rooted.
I tried again PetesMotorolaRootTools_v1.09 and I get the some massage from the top.
Is the Droid Rooted? I don't think so because I can't uninstall system apps. What I have do to please. thanks
Click to expand...
Click to collapse
Thank you. This version rooted my D3. Please , can you help me with the correct radio.img. for flashing. All what I tried, change the baseband to unknow. Thanks
dbix said:
Thank you. This version rooted my D3. Please , can you help me with the correct radio.img. for flashing. All what I tried, change the baseband to unknow. Thanks
Click to expand...
Click to collapse
radio must match build.prop
so either radio flash is failing or build.prop replacement is failing
xt862, radio help
dbix said:
Thank you. This version rooted my D3. Please , can you help me with the correct radio.img. for flashing. All what I tried, change the baseband to unknow. Thanks
Click to expand...
Click to collapse
how can I do this? do I have to do more changes on build.prop? thanks
Did you install moto drivers and check device manager to verify?
see my Installing Drivers and Driver errors
---------- Post added at 01:31 AM ---------- Previous post was at 01:30 AM ----------
dbix said:
how can I do this? do I have to do more changes on build.prop? thanks
Click to expand...
Click to collapse
I would start over by flashing 906.xml/firmware with RSD Lite
---------- Post added at 01:33 AM ---------- Previous post was at 01:31 AM ----------
dbix said:
do I have to do more changes on build.prop? thanks
Click to expand...
Click to collapse
no, just use the build.prop in the unlock.zip
Help please. XT883 on XT862 not working
sd_shadow said:
Did you install moto drivers and check device manager to verify?
see my Installing Drivers and Driver errors
---------- Post added at 01:31 AM ---------- Previous post was at 01:30 AM ----------
I would start over by flashing 906.xml/firmware with RSD Lite
---------- Post added at 01:33 AM ---------- Previous post was at 01:31 AM ----------
no, just use the build.prop in the unlock.zip
Click to expand...
Click to collapse
I'm a beginner in this area. Where to download the build.prop in the unlock.zip and how to install. Tks
Help please. XT883 on XT862 not working
sd_shadow said:
Did you install moto drivers and check device manager to verify?
see my Installing Drivers and Driver errors
---------- Post added at 01:31 AM ---------- Previous post was at 01:30 AM ----------
I would start over by flashing 906.xml/firmware with RSD Lite
---------- Post added at 01:33 AM ---------- Previous post was at 01:31 AM ----------
no, just use the build.prop in the unlock.zip
Click to expand...
Click to collapse
I'm a beginner in this area. Where to download the build.prop in the unlock.zip and how to install. Tks
from here Guide - Band Unlock XT862 for T-mobile/ATT
Help please. XT883 on XT862 not working
dbix said:
I'm a beginner in this area. Where to download the build.prop in the unlock.zip and how to install. Tks
Click to expand...
Click to collapse
If I flash to that radio.img I get baseband =unknow
Yes then you use the build.prop that is with it.
Sent from my Amazon Kindle Fire using Tapatalk
---------- Post added at 03:15 AM ---------- Previous post was at 03:15 AM ----------
To fix baseband
Sent from my Amazon Kindle Fire using Tapatalk
Help please. XT883 on XT862 not working
dbix said:
If I flash to that radio.img I get baseband =unknow
Click to expand...
Click to collapse
I change and those 2 build.prop 1 to 0 and 7 to 3
No, just use the build.prop that came with the radio.img
Sent from my Amazon Kindle Fire using Tapatalk
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
As is, no edit.
Sent from my Amazon Kindle Fire using Tapatalk
Help please. XT883 on XT862 not working
sd_shadow said:
No, just use the build.prop that came with the radio.img
Sent from my Amazon Kindle Fire using Tapatalk
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
As is, no edit.
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
This is what I don't know how to do. To copy the unlock.zip to a memory card, Reboot the phone and enter on custom recovery?
No unzip on pc
Sent from my Amazon Kindle Fire using Tapatalk
Help please. XT883 on XT862 not working
sd_shadow said:
No unzip on pc
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
t' what I did, then I start on command prompt and I flashed the radio. Please tell me how to do with build prop.Thanks
Related
I would preferably need the firmware called '81.5.31002.XT890.Orange.en.GB'. I've googled for it, and found an EU one which was unlocked, but it was rooted, and not locked to a certain network.
Two questions:
Any idea where I can find it (stock system, stock kernel, unrooted)?
If impossible, if I flash the original firmware - unrooted firmware, stock kernel, stock system - and manage, thusly, to lock the bootloader, will it be made under warranty?
MiKenning said:
I would preferably need the firmware called '81.5.31002.XT890.Orange.en.GB'. I've googled for it, and found an EU one which was unlocked, but it was rooted, and not locked to a certain network.
Two questions:
Any idea where I can find it (stock system, stock kernel, unrooted)?
If impossible, if I flash the original firmware - unrooted firmware, stock kernel, stock system - and manage, thusly, to lock the bootloader, will it be made under warranty?
Click to expand...
Click to collapse
Post the build.prop, screenshot of About Phone, and the default.prop and I will look for it.
Sent from my MB886 using Tapatalk 2
EDIT: Nevermind. Found it. Uploading now...
MD5: 42804A7566981C25DD9F85AAE871FAE2
Download: http://modmymobile.com/staff/pzyduck/Leaks/XT890/CFC_signed_customer_8.7.1I-110_IFW-31_ORAGB.xml.zip
Be aware, this XML wipes the userdata and cache.
Enjoy.
mattlgroff said:
MD5: 42804A7566981C25DD9F85AAE871FAE2
Download: http://modmymobile.com/staff/pzyduck/Leaks/XT890/CFC_signed_customer_8.7.1I-110_IFW-31_ORAGB.xml.zip
Be aware, this XML wipes the userdata and cache.
Enjoy.
Click to expand...
Click to collapse
You SAVIOUR. Thank you very much.
mattlgroff said:
MD5: 42804A7566981C25DD9F85AAE871FAE2
Download: http://modmymobile.com/staff/pzyduck/Leaks/XT890/CFC_signed_custmer_8.7.1I-110_IFW-31_ORAGB.xml.zip
Be aware, this XML wipes the userdata and cache.
Enjoy.
Click to expand...
Click to collapse
Would I flash it via fast boot (like fastboot flash all CFC_signed_custmer_8.7.1I-110_IFW-31_ORAGB.xml.zip)?
Use RSD Lite 6.1.4 to flash Fastboot Files.
Sent from my XT890
---------- Post added at 03:45 PM ---------- Previous post was at 03:44 PM ----------
http://forum.xda-developers.com/showthread.php?p=33712189
Sent from my XT890
HSD-Pilot said:
Use RSD Lite 6.1.4 to flash Fastboot Files.
Sent from my XT890
---------- Post added at 03:45 PM ---------- Previous post was at 03:44 PM ----------
http://forum.xda-developers.com/showthread.php?p=33712189
Sent from my XT890
Click to expand...
Click to collapse
There's no .sbf file in the XML file
EDIT: Never mind! Got it working!
mattlgroff said:
MD5: 42804A7566981C25DD9F85AAE871FAE2
Download: http://modmymobile.com/staff/pzyduck/Leaks/XT890/CFC_signed_customer_8.7.1I-110_IFW-31_ORAGB.xml.zip
Be aware, this XML wipes the userdata and cache.
Enjoy.
Click to expand...
Click to collapse
Is this one locked to a particular carrier by any chance, or can it be used with any GSM SIM?
jenova941 said:
Is this one locked to a particular carrier by any chance, or can it be used with any GSM SIM?
Click to expand...
Click to collapse
Haven't used it myself sorry.
Sent from my DROID RAZR HD using Tapatalk 2
mattlgroff said:
Haven't used it myself sorry.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
Hehe, thanks anyway.
Hi
I think I have the same question as the OP. My Razr i is a UK T Mobile - System version is 81.5.31002.xt890.orange.en.gb - so will the firmware linked to above be the one I need? It would appear so. On another thread, dog121 has stated that this firmware is open to the non-unlocked bootloader root. So, if I do this and it all goes pear shaped, I have a way back? Is that the correct understanding?
It was so much easier on my old Defy!
Eserim
urgent
sir
the link provided is longer valid
plz send me other link
thanks
HSD-Pilot said:
Use RSD Lite 6.1.4 to flash Fastboot Files.
Sent from my XT890
---------- Post added at 03:45 PM ---------- Previous post was at 03:44 PM ----------
http://forum.xda-developers.com/showthread.php?p=33712189
Sent from my XT890
Click to expand...
Click to collapse
Help , Please !!!
Hello i have rooted my phone and unlocked bootloader, i tried to update to latest version via phone updater but it fails during install , i would like to delete clockwork recovery in order to do this . i guess unrooting and reverting to stock firmware is necessary also ; my system version is 91.2.29001.xt890.retail.en.gb. i cannot find it online . please any advice .
asko_85 said:
Hello i have rooted my phone and unlocked bootloader, i tried to update to latest version via phone updater but it fails during install , i would like to delete clockwork recovery in order to do this . i guess unrooting and reverting to stock firmware is necessary also ; my system version is 91.2.29001.xt890.retail.en.gb. i cannot find it online . please any advice .
Click to expand...
Click to collapse
http://www.filefactory.com/file/6b396l5ar4tf/CFC_9.8.2I-50_SMI-26_S7_USASMIJBORAGB.xml.zip
Sent from my XT1095 using Tapatalk
Thank You !!! but are you sure it is the one i have , it doesnt look like it,, also will this wipe my userdata ??
Also; this installable by RSD ???
Hello ; My Motororola Razr i is "Brick" because I don't unlock bootloader ... for root the Razr ...
I want flash new rom and RDS lite FAIL (http://image.noelshack.com/fichiers/2013/02/1357833380-screen-fail-flash-rom.jpg)
I followed this tutorial : http://forum.xda-developers.com/showthread.php?t=1974568 (It did not work)
Solutions ? & i'm noob ... Thanks .
GalaxyOnFire said:
Hello ; My Motororola Razr i is "Brick" because I don't unlock bootloader ... for root the Razr ...
I want flash new rom and RDS lite FAIL (http://image.noelshack.com/fichiers/2013/02/1357833380-screen-fail-flash-rom.jpg)
I followed this tutorial : http://forum.xda-developers.com/showthread.php?t=1974568 (It did not work)
Solutions ? & i'm noob ... Thanks .
Click to expand...
Click to collapse
You need to ulock your bootloader to flash your phone
tatazeuz said:
You need to ulock your bootloader to flash your phone
Click to expand...
Click to collapse
Nahhh...use this one
sbf.droid-developers.org/smi/CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml.zip
Sent from my XT910
there anplah
HSD-Pilot said:
Nahhh...use this one
sbf.droid-developers.org/smi/CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml.zip
Sent from my XT910
Click to expand...
Click to collapse
Fail link ... New link please ?
Copy & paste into an new tab
Tapatalk failure
Sent from my XT910
HSD-Pilot said:
Copy & paste into an new tab
Tapatalk failure
Sent from my XT910
Click to expand...
Click to collapse
I had 404 Not found ...
And rom are French or Eu. ?
Great Britain.
sbf.droid-developers.org/smi/list.php
There's an France, too but i'm not sure if it's branded. Just make sure you use an 39 Fastboot, because all other EU Files are have an lower secure Level (That's why the 32 fails). You only can downgrade with an unlocked BL.
Sent from my XT910
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
http://sbf.droid-developers.org/smi/list.php
Sent from my XT910
---------- Post added at 08:37 PM ---------- Previous post was at 08:35 PM ----------
Great Britain
http://sbf.droid-developers.org/smi...17.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml.zip
SFR France
http://sbf.droid-developers.org/smi...17.0R_USASMIICSVFFR_P045_A006_S1FF_fb.xml.zip
Sent from my XT910
Ah Okay Thanks bro' I download "SFR FRANCE" ([in sbf.droid-developers)
And does it work really ??
It will.
If you had asked before, it had been enough to flash only the boot.img of the FW you where running before you tried to root. But once you have messed around with RSD this is the easiest solution.
What was your FW? You can still try to fastboot the gbt.bin and boot.img from that one, instead of flashing an whole FW.
Sent from my XT910
what is the FW
Firmware. You where on 40002 EU before you tried to root?
If yes, i have the files linked in my Home Forum. Right now i'm @ work, so you would have to wait till i'm @ home (2 hours) or register in my Forum
Sent from my XT910
So, any news? You got it?
I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
MD5: 807f95b809df0630668e10d3ed029306
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
MD5: 32b70505615d22cf0c9e86507e114f44
Are they necessary for updating toe 4.1.1 (custom rom), or just a nice bonus?
Bonus
DubelBoom said:
Are they necessary for updating toe 4.1.1 (custom rom), or just a nice bonus?
Click to expand...
Click to collapse
I usually do to avoid potential issue with custom roms and enjoy the benefits of any bugfixes and battery savings of the new baseband.
NoobieExtraordinare said:
I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
Click to expand...
Click to collapse
Excellent thanks! flash in recovery I assume?
If I flash a boot loader through recovery, will it start as unlocked then I assume? Sorry that's a pretty noobish question.
NoobieExtraordinare said:
I was searching for these all over the place a few moments ago and thought I'd post them here for the rest of the souls like me.
Bootloader
https://drive.google.com/file/d/0B3QKQnoa4w43QUhmczdwcDhvUTA/edit?usp=sharing
Radio
https://drive.google.com/file/d/0B3QKQnoa4w43QzV5Q3VYSktUU2c/edit?usp=sharing
Click to expand...
Click to collapse
and these two files will work with the US models of the Nexus 5 correct?
I have d821, it's the same file or not?
vomer said:
Excellent thanks! flash in recovery I assume?
Click to expand...
Click to collapse
Yup, flash away. I did!
Hooya said:
If I flash a boot loader through recovery, will it start as unlocked then I assume? Sorry that's a pretty noobish question.
Click to expand...
Click to collapse
Yes, I'm using Cataclysm ROM with Franco's kernel and both these and the HDR+ Camera worked just fine.
sushi829 said:
and these two files will work with the US models of the Nexus 5 correct?
Click to expand...
Click to collapse
Will work with US and EU models from what I gathered.
safendi said:
I have d821, it's the same file or not?
Click to expand...
Click to collapse
Yes it is, I have the D821.
how do i confirm these two files were flashed correctly after flashing both files in TWRP?
Can i flash it and also use catalysm 4.4 without problems?
Gesendet von meinem Nexus 5 mit Tapatalk
can someone provide a mirror? i can't access links from work or from my Nexus 5.
Trying to flash the bootloader fails.. "file_getprop: failed to stat "/system/build.........." "E:Error executing updater binary in zip....................."
Flashing it in TWRP.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
@NoobieExtraordinare Any idea?
---------- Post added at 09:02 PM ---------- Previous post was at 08:55 PM ----------
Nvm, wasnt on any 4.4.1 rom so couldnt flash for some reason.
tuffCookie said:
can someone provide a mirror? i can't access links from work or from my Nexus 5.
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=2557523
nerotix said:
Trying to flash the bootloader fails.. "file_getprop: failed to stat "/system/build.........." "E:Error executing updater binary in zip....................."
Flashing it in TWRP.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
@NoobieExtraordinare Any idea?
---------- Post added at 09:02 PM ---------- Previous post was at 08:55 PM ----------
Nvm, wasnt on any 4.4.1 rom so couldnt flash for some reason.
Click to expand...
Click to collapse
Seems to be flashing fine. Corrupt download? I don't believe you have to be on a 4.4.1 rom to flash the bootloader.
Ever since updating to 4.4.1 I've had full bars for network signal strength, but terrible speeds. Tried re-flashing the radio only. No improvement seen. Is there a way to roll back the radio only, or re-flash the old radio (via TWRP)?
Had someone flashed the bootloader on D820?
EDIT:
I did. Worked
Thanks!
Is Bootloader flash necessary?
Inviato dal mio Nexus 5
DubelBoom said:
Had someone flashed the bootloader on D820?
EDIT:
I did. Worked
Thanks!
Click to expand...
Click to collapse
Can someone post a zip because It won't let me download.
Sent from my Nexus 5 using Tapatalk
I second that please add zips so it can be done on phone without computer
Sent from my Nexus 5 using Tapatalk 2
Guys it is a zip file! That's how it's viewed from mobile. Open the link and use your browser to select "Use Desktop Mode" Now on the top left, click Download. It will download the full zips. Don't you see (flashable) in the thread title?
Downloaded & flashed just fine from my N5
Hey guys!
I have an unrootable Droid 3, and I'm gonna sell it and get another one which I can't root.
I figur I'll have a hard time selling it here in Portugal once the languages in it are only English and Spanish.
How can I add anther language pack using its original rom?
Thanks in advance
Why not just use the correct root method?
Sent from my XT862 using Tapatalk
brunomcf said:
Hey guys!
I have an unrootable Droid 3, and I'm gonna sell it and get another one which I can root.
I figur I'll have a hard time selling it here in Portugal once the languages in it are only English and Spanish.
How can I add anther language pack using its original rom?
Thanks in advance
Click to expand...
Click to collapse
Rooted or GSM locked?
sd_shadow said:
Why not just use the correct root method?
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1240130&page=16
I used this method, and it didn't work. Any other sugestions?
MrObvious said:
Rooted or GSM locked?
Click to expand...
Click to collapse
I can't root this one, but I'd like to get a rooted one and gsm unlocked. (mine is Gsm unlocked roght now)
what is the system version? (menu>settings>about phone>system version)
---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------
you tried motofail downloaded from http://vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/?
(motofail_windows.zip)
---------- Post added at 02:56 PM ---------- Previous post was at 02:44 PM ----------
I see back in Aug you replied 906 system version, only motofail will root 906.
sd_shadow said:
what is the system version? (menu>settings>about phone>system version)
---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------
you tried motofail downloaded from http://vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/?
(motofail_windows.zip)
---------- Post added at 02:56 PM ---------- Previous post was at 02:44 PM ----------
I see back in Aug you replied 906 system version, only motofail will root 906.
Click to expand...
Click to collapse
5.7.906.xt862.verizon.en.us
Is this one rootable with motofail?
only motofail will root 906.
---------- Post added at 03:21 PM ---------- Previous post was at 03:05 PM ----------
if motofail_windows.zip has failed, it's because you missed a step.
1. download motofail_windows.zip
2. extract files
3. verify you downloaded and extracted all the files
a. motofail_windows folder should be 3.78mb
b. make sure you have a file named motofail that is 489 KB (may show as 490), if it is missing disable virus protection and redownload motofail
4. install moto drivers
5. Make sure your device is in USB debugging mode , attach it to your PC
6. change usb mode to charge only or pc mode
7. run run.bat in motofail_windows folder
8. follow on screen directions
I'll do it now.
Btw, what's ur opinion on the best recent rom for this phone?
Stability and speed are my major priorities.
my daily rom is Steel Droid: 5.6
but minmoto is more popular
For some reason steel droid rom wouldn't connect to gsm network.
So I've instalaed Avatar 4.2.2 and I'm really satisfied with it.
Thxfor ur help!
Search google for: Droid 3 (your language) pack
Sent from my Droid 3 using XDA-Developers app
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
https://www.androidfilehost.com/?fid=674106145207493788
JUSMEJOSE said:
Here is stock oreo, You can use this to return back to stock or update
AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always downgrade back to Nougat since its still Revision 4
Click to expand...
Click to collapse
If i have the baseband G935AUCU4BQD4 can i still use this flash?
deleted
thank you!
I am on initial Oreo beta, can I flash this directly using Odin?
vineet381 said:
I am on initial Oreo beta, can I flash this directly using Odin?
Click to expand...
Click to collapse
Yes sir
juni12 said:
Yes sir
Click to expand...
Click to collapse
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
vineet381 said:
Thanks, I noticed AP is .tar while the rest 3 files are .md5, do I need to change the extension of any file(s) before flashing these in Odin?
Click to expand...
Click to collapse
No
Can I Flash this to G935U.
Hamza khAnz said:
Can I Flash this to G935U.
Click to expand...
Click to collapse
Yes
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
jrkruse said:
Yes
Click to expand...
Click to collapse
Hello people
i have S7 Edge G935A working on nugat 7.0
buildnummber : NRD90M.G935AUCU4BQA6
my problem is when i want to turn wifi on i must turn airplan mode on first...
is there any sulotion
and i didnt receive any ota update till now to solve this problem......
Anyone? Hoping to do this today!
JWhipple said:
What version of Odin do you recommend? I've been waiting for this - have been running the G935U ROM since it was made available - will be happy to get some of my AT&T functions back .
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
[edit to add notifications]
Click to expand...
Click to collapse
JWhipple said:
Anyone? Hoping to do this today!
Click to expand...
Click to collapse
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
jrkruse said:
You need to use 3.13
https://androidfilehost.com/?fid=746010030569965806
Click to expand...
Click to collapse
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
MichaelJCarr2302 said:
You had SM-g935a (att phone) but flashed the unlocked firmware before you flashed this?
Will it work for me? I have sm-g935a but I flashed the unlocked firmware to remove bloatware. Can I just flash this over the unlocked to get me back to att 8.0?
Click to expand...
Click to collapse
That's the same boat I was in - worked without a hitch!
JWhipple said:
Got it, thanks!
---------- Post added at 01:35 PM ---------- Previous post was at 12:42 PM ----------
Worked flawlessly on my 935A that had been flashed to 935U - thanks so much!
Click to expand...
Click to collapse
This little morsel of information should probably get added to the OP. I was in the same boat having flashed from 935A to 935U on Odin 3.12.7 (as was recommended for that process) and then tried to use the same version to go from 935U to 935A (Oreo). When that process failed, I went deeper into the thread and found this. Pulled a copy and it worked like a champ, but if we could add this info to the top post, it would be helpful.
--C#
JWhipple said:
That's the same boat I was in - worked without a hitch!
Click to expand...
Click to collapse
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
MichaelJCarr2302 said:
Okay so all i gotta do is put phone in download mode, and put files in Odin and flash?
Click to expand...
Click to collapse
Correct, assuming you're using the version of Odin above