Alrighty, I'm new to this neck of the woods, but I did the obligatory forums search and didn't find anything on it, so here goes.
I was messing around this afternoon, playing with ADB and my new Note 3, rebooting into the recovery that looked familiar (sorry for potato, but you get the idea), and I had an idea that I'd not seen: Is it possible to use the stock recovery to downgrade to an official Jelly Bean firmware, then root and have fun?
If anyone has any insight as to how this may or may not work, please, let me know.
SphereOfCuriosity said:
Alrighty, I'm new to this neck of the woods, but I did the obligatory forums search and didn't find anything on it, so here goes.
I was messing around this afternoon, playing with ADB and my new Note 3, rebooting into the recovery that looked familiar (sorry for potato, but you get the idea), and I had an idea that I'd not seen: Is it possible to use the stock recovery to downgrade to an official Jelly Bean firmware, then root and have fun?
If anyone has any insight as to how this may or may not work, please, let me know.
Click to expand...
Click to collapse
Unfortunately no. Downgrading is not possible at this time.
Dammit. Thanks.
At no one in particular: What about Heimdall?
I doubt what I'm thinking of is original, but I've yet to find a thread already started with this topic. If this is in the wrong section, apologies.
I believe that heimdall has been tried and failed. These bootloaders are signed with keys that we can't Crack within a reasonable amount of time. We need something that can be exploited or a leak.
Sent from my SM-N900A using XDA Premium 4 mobile app
Related
Hi everyone,
I have the Samsung Galaxy s Captivate and I want to upgrade it from 2.1 to froyo 2.2. I understand that ATT has not release it. However, I found this thread and froyo is leaked for everyone.
Here is the thread.
http://forum.xda-developers.com/showthread.php?t=797282
I was wondering if I need to be rooted in order to do this. If so, what is the most easy and most efficient way of doing it? I also want to get rid of all the ATT bloatware, I hear there is a great rom that gets rid of it.
Thanks for listening I can’t wait for your replies.
Michael.
Hello Michael,
The answer to all of your questions and more are in the thread you linked, including difficulties other people have had and sometimes their resolutions.
Good luck!
You found the thread you need to read. Go through it, even if it does take you about an hour to do. You need to read that way you know where information is on how to fix your phone if anything goes wrong. Everything you do on your phone is at your own risk.
Basically just flash using the one click ODIN for the JI6 build.
One important note is to remove the USB as soon as it reboots because otherwise you can face issues with it becoming stuck in airplane mode. I don't know why exactly but it happened to me and to others.
If you haven't flashed using Odin yet, search for the Odin3 thread. That will give you the steps to use the one click Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
UserNamer said:
Hello Michael,
The answer to all of your questions and more are in the thread you linked, including difficulties other people have had and sometimes their resolutions.
Good luck!
Click to expand...
Click to collapse
Well, I only link the download and flash for it. The link provides no explanation on how to flash or install froyo.
flashman2002 said:
You found the thread you need to read. Go through it, even if it does take you about an hour to do. You need to read that way you know where information is on how to fix your phone if anything goes wrong. Everything you do on your phone is at your own risk.
Click to expand...
Click to collapse
I don't see where the reading is. Only the download mirrors.
Colton5419 said:
Basically just flash using the one click ODIN for the JI6 build.
One important note is to remove the USB as soon as it reboots because otherwise you can face issues with it becoming stuck in airplane mode. I don't know why exactly but it happened to me and to others.
Click to expand...
Click to collapse
cappysw10 said:
If you haven't flashed using Odin yet, search for the Odin3 thread. That will give you the steps to use the one click Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks for the advise doing that now.
Hello all,
I've been reading and downloading from xda for over a year now (sgs- darky's rom mainly), and this is my FIRST POST!
I know i can find my answer just by looking but i really wanted to post for the first time so here's my question- My tab is in the post (got it from ebay as i'm a pauper and can't afford it new, or the 8.9 or 10.1) and obviously want to root it straight away. I've seen that some are using z4 root but my sgs won't accept this method, can i be sure it'll work?
take care fellow "tabbers"
PS the doorbell just rang and it's here! *wets pants and logs off*
What firmware version is it on? Please post complete information from *#1234#
until we know that we cannot advice you.....
bongski55 said:
What firmware version is it on? Please post complete information from *#1234#
until we know that we cannot advice you.....
Click to expand...
Click to collapse
it's 2.2 froyo build number FROYO.XWJJ7
baseband P1000XXJK5
KERNEL 2.6.32.9 [email protected] #1
PDA- P1000XWJJ7
PHONE- P1000XXJK5
CSC- P1000CPWJJ5
I need to get gingerbread (at least) on this thing straight away! Or any cool roms you can recommend?
How do i find out if it's GSM or CDMA? i'm in the UK... That is probably a really stupid question, but i'm a stupid guy... A stupid guy who loves android and wants to learn more!
Any links to the right places would be really appreciated
First you're not stupid. You're just new and learning.
Second your tab judging by its firmware is gsm european tab.
Third you can root using superoneclick root.
Fourth. Head to the development section and you will find alot of great roms (or click on my sig if you're interested in overcome). JUST BE SURE TO READ ENTIRE GUIDES AND STUDY THEM BEFORE FLASHING ANYTHING.
DarkPal said:
JUST BE SURE TO READ ENTIRE GUIDES AND STUDY THEM BEFORE FLASHING ANYTHING.
Click to expand...
Click to collapse
+100000000000000 (I'd keep my finger depressed on the 0 key longer, but you get the point)
So many people get themselves into trouble by not reading instructions or skipping ahead.
Easy to get yourself into trouble, can be VERY hard getting out...
Thank you for all the help, most kind I'm at work now so will try some bits tomorrow, managed to get rooted before leaving tho
Sent from my GT-P1000 using XDA App
Your tab is rooted already. Look at the kernal version. In your apps you will see something called Superuser. Tap it. If its there and opens you are rooted.
rangercaptain said:
Your tab is rooted already. Look at the kernal version. In your apps you will see something called Superuser. Tap it. If its there and opens you are rooted.
Click to expand...
Click to collapse
That's what really confused me, the kernel said root on it, but no super user was there and none of my purchased root apps could aquire root.... so I used super one click as advised and hey presto! Still confused as to why it said that on my kernel tho...
Sent from my GT-P1000 using XDA App
Someone tried to return the tab to stock. The busybox was probably there too. Anyway, you are good now. What's next?
Resolve the signed bootloader with chainfire patch
Sent from my GT-P1000 using Tapatalk
Thanks all, I installed the overcome gold rom last night and all is well
Just out of interest as i'm un-learned, how can you tell if the bootloader is signed? (As far as I can tell) it hasn't affected the rom installation... could it?
Thanks all for the support!
Sent from my GT-P1000 using XDA App
locked bootloader? read here
http://forum.xda-developers.com/showthread.php?t=888071
but can't find an answer.... is it doable? Also, what other mods can I do to it? I wish XDA had a section for each version of the tab, I have a huge headache from trying to find my answer.... thanks guys
bump..... Please guys, help me out. I tried rooting last night but failed, guess I tried the root from a different tab... so please help me out... I'm getting ready to smash this thing
Really, no one can help me out? ... maybe another forum has more courteous members.
Sent from my MB860 using XDA Premium App
Do you think that bumping your post two hours after posting it is courteous?
I just got a Galaxy Tab WiFi myself, but I did my research *before* I bought it. No Gingerbread is available, that I know of. There are not many alternative ROMs for the WiFi only model.
What did you use in your rooting attempt? The only two ways I know are with a Windows app or with z4root, an Android app. I haven't tried either one, here is a link to z4root on this forum.
http://forum.xda-developers.com/showthread.php?t=833953
I installed GB 2.3.3 using this thread
http://forum.xda-developers.com/showthread.php?t=1083971
hope that helps
SuperOneClick should be able to help you root your Tab.
Here's the Noob Rooting Guide with links and downloads.
Always do your research. The Development forums will be one of your best resources for your Tab.
BUGBEAR_X said:
I installed GB 2.3.3 using this thread
http://forum.xda-developers.com/showthread.php?t=1083971
hope that helps
Click to expand...
Click to collapse
That's for the 1000 not 1010 which is the wifi only model, thank you though.
Sent from my MB860 using XDA Premium App
brucemcl said:
Do you think that bumping your post two hours after posting it is courteous?
I just got a Galaxy Tab WiFi myself, but I did my research *before* I bought it. No Gingerbread is available, that I know of. There are not many alternative ROMs for the WiFi only model.
What did you use in your rooting attempt? The only two ways I know are with a Windows app or with z4root, an Android app. I haven't tried either one, here is a link to z4root on this forum.
http://forum.xda-developers.com/showthread.php?t=833953
Click to expand...
Click to collapse
No offense but if you're going to criticize you might as well not even comment to avoid any frustrations or arguments as a result. Thank you for the link, I was able to find z4 and lag fix yesterday.... applied both but i might roll back on the lag fix since I have no haptic feedback now unless anyone knows of a fix? I wasn't able to find anything on Google... wifi only tab and p1010 aren't too popular searches.
Sent from my MB860 using XDA Premium App
*sigh* waiting for this too..
****ty Samsung , is it so hard to just make an official Gb for this little tab considering the workforce they have at their disposal.
At one point I had heard that the Sprint stock GB (2.3.4) update worked on the Wifi only tabs, but I don't have a wifi only to test with.
I haven't heard of any alternative roms for the wifi only version.
Sent from my SCH-I800 using Tapatalk
Check with Kies, see if you have a firmware update. I only have a P1000, but maybe it's similar.
oh yeah, give time for people to reply your thread. Don't be a spoiled kid.
Sent from my Galaxy Tab P-1000 using Tapatalk
EDIT: from other answers here the Sprint GB 2.3.4 ROM stock or rooted sounds the way to go, so it looks like this should work for you as it did for me on my Verizon CDMA tab.
It's hard to say for sure, experimentation is part of the fun, but killing the tab isn't. I didn't find any definitive answers on flashing a Sprint CDMA ROM on to a Verizon CDMA Galaxy Tab (for example), so I decided to try for myself:
http://forum.xda-developers.com/showthread.php?t=1255339
I suspect doing a FULL ROM flash would be a *very* bad idea (it seems doing that with a GSM ROM on other (non-GSM) tabs KILLS it). However, the technique I used was only to apply the kernel and filesystems, so I would *think* if you had a backup from before (always best to have a backup anyway, right?) you could always revert. You may want to look around and check to see if stock WIFI images are out there (I don't know for sure) but the Voodoo or CwM (ClockworkMod) recovery backups should be fine either way.
Then if you apply the filesystem and kernel files from 2.3.4 and they don't work you should be able to revert (I would assume, I can certainly flash back and forth on mine). I would *think* the kernel supports vanilla hardware + CDMA additionally (i.e. you don't need it, but it doesn't hurt), but may be fine.
But again, unless you're prepared to take the risk, I cannot say for sure, you can wait and see if anyone else chimes in, but that's my take.
pvtjoker42 said:
At one point I had heard that the Sprint stock GB (2.3.4) update worked on the Wifi only tabs, but I don't have a wifi only to test with.
Click to expand...
Click to collapse
I don't feel like bricking mine to find out lol
Sent from my MB860 using XDA Premium App
loserbaby said:
EDIT: from other answers here the Sprint GB 2.3.4 ROM stock or rooted sounds the way to go, so it looks like this should work for you as it did for me on my Verizon CDMA tab.
It's hard to say for sure, experimentation is part of the fun, but killing the tab isn't. I didn't find any definitive answers on flashing a Sprint CDMA ROM on to a Verizon CDMA Galaxy Tab (for example), so I decided to try for myself:
http://forum.xda-developers.com/showthread.php?t=1255339
I suspect doing a FULL ROM flash would be a *very* bad idea (it seems doing that with a GSM ROM on other (non-GSM) tabs KILLS it). However, the technique I used was only to apply the kernel and filesystems, so I would *think* if you had a backup from before (always best to have a backup anyway, right?) you could always revert. You may want to look around and check to see if stock WIFI images are out there (I don't know for sure) but the Voodoo or CwM (ClockworkMod) recovery backups should be fine either way.
Then if you apply the filesystem and kernel files from 2.3.4 and they don't work you should be able to revert (I would assume, I can certainly flash back and forth on mine). I would *think* the kernel supports vanilla hardware + CDMA additionally (i.e. you don't need it, but it doesn't hurt), but may be fine.
But again, unless you're prepared to take the risk, I cannot say for sure, you can wait and see if anyone else chimes in, but that's my take.
Click to expand...
Click to collapse
Lol thanks... I guess if someone has the time and patience to try it and it works then please let the rest of us p1010 owners know
Sent from my MB860 using XDA Premium App
I have the P1010 also and from what I've heard, the two models (P1010 and P1000) have different hardware which makes the latter model possible for the ginger update while ours likely will never get it.
Enjoy it for what it is. That's all I can say.
jstrayy said:
No offense but if you're going to criticize you might as well not even comment to avoid any frustrations or arguments as a result.
Click to expand...
Click to collapse
No offence but you are the one who was rude by bumping your topic after 2 hours and also accusing people who didnt answer as not courteous, so obviously you are going to get criticism.
Your problem is that you cant be bothered to go read or search and expect people to jump on your topic and bring all the info to you. This is XDA-developers, not tech support, try and at least help yourself first before demanding answers.
If anyone tests the spring gingerbread method and it works, please say so. xD Im too much of a coward to risk my tab.
OmniLemur said:
If anyone tests the spring gingerbread method and it works, please say so. xD Im too much of a coward to risk my tab.
Click to expand...
Click to collapse
You can save a flashable ROM in the sdcard. Then if the tab got bricked, you can insert the sdcard in and reflash again. But i don't recommend doing this because me myself never flashed my tab, only my nexus one.
hi everyone sorry for the dumb question ived looked everywhere with no difinative answer. I am new to rooting obviously but have been following u guys since hd2 days!!! Never pulled the trigger on flashing but im tired of the wait for an official jb rom by tmo which dont know if it will ever happen. Anyway i have seen all the threads on rooting the tmo note but not sure if the files to root can be done with this build uvma1. All of them are about the previous version uvgl3 or something like that which is the previous one before the update back december- january. Also would u choose cwrm or twrp cor recovery and do i need the latest version of odin or will the 1.4 be ok. Sorry for sounding lost and dumb but have only glanced through most of the process. Worst case scenerio is getting me a new note2!!
http://forum.xda-developers.com/showthread.php?t=2165841
Sent from my SGH-T879 using xda premium
Here is you might can get the answer that you were asking about it..
Good lucks..thanks
kim621973 said:
http://forum.xda-developers.com/showthread.php?t=2165841
Sent from my SGH-T879 using xda premium
Here is you might can get the answer that you were asking about it..
Good lucks..thanks
Click to expand...
Click to collapse
Thank you for the link and have read it but someone talks about downloading cwm and superuser and then downloading a uvma1.tar file which there isnt a link to it and the last post explains a diferrent procedure which to me sounds knid of complicated and dont know if i can pull that off as i am not very bright to such thin as u can tell lol. The original way sounded much easier but i guess the uvlg3 file wont work on this build from what i can tell. If that makes sense now im just hesitant to try any of it as i really cant afford to get me a new phone incase something goes wrong. Sorry for sounding dumb but i wish it could be much easier.
You can go to my thread and install my pre rooted version. You can use backup then restore to keep your data.
Sent from my SGH-T879 using xda app-developers app
As I have mentioned in the "Goodies" forum the only way I could root the build (uvma1) is by downloading the two apps from this thread: http://forum.xda-developers.com/showthread.php?t=2217840 from method 3 section and flash it using TWRP 2.3. Superuser-3.0.7-efghi-signed.zip did not work, would not even flash.
A guy sold me an ATT Moto X and he neglected to tell me it was rooted. So now I'm stuck with root that I don't really want on this phone. I tried using RSD Lite and the All in One Tool that was posted on here but nothing would work with my computer. So, now im just looking for a stock rom I could flash but I can't seem to find any on here for ATT. Any recomendations to fix this? Lastly, would flashing the 4.4 leak that was posted in the General section work? any help is appreciated.
crazyturtle777 said:
A guy sold me an ATT Moto X and he neglected to tell me it was rooted. So now I'm stuck with root that I don't really want on this phone. I tried using RSD Lite and the All in One Tool that was posted on here but nothing would work with my computer. So, now im just looking for a stock rom I could flash but I can't seem to find any on here for ATT. Any recomendations to fix this? Lastly, would flashing the 4.4 leak that was posted in the General section work? any help is appreciated.
Click to expand...
Click to collapse
As long as you are on 4.2.2 you should be able to rsd lite back to the most latest 4.2.2 firmware.
Either way, you can flash the 4.4 leak with fast boot
Moto X rocking 4.4
crazyturtle777 said:
A guy sold me an ATT Moto X and he neglected to tell me it was rooted. So now I'm stuck with root that I don't really want on this phone. I tried using RSD Lite and the All in One Tool that was posted on here but nothing would work with my computer. So, now im just looking for a stock rom I could flash but I can't seem to find any on here for ATT. Any recomendations to fix this? Lastly, would flashing the 4.4 leak that was posted in the General section work? any help is appreciated.
Click to expand...
Click to collapse
you probably are doing something wrong with flashing the stock FW. check the threads that talk about it and you should be fine. If you are running mac then there is a thread for that. if not then there is a thread for that as well. post in those threads with questions and you will get answers. i wouldn't take th 4.4 leak because you don't seem like you want to toy with your phone. It's possible that those people that took that leak might have to do a little or perhaps a lot of things to eventually take the real OTA. This has happened with other phones. You don't seem like you want to do that much tweaking so just go to those threads and ask questions there and explain what exactly you are doing and the errors you are getting.
jayboyyyy said:
you probably are doing something wrong with flashing the stock FW. check the threads that talk about it and you should be fine. If you are running mac then there is a thread for that. if not then there is a thread for that as well. post in those threads with questions and you will get answers. i wouldn't take th 4.4 leak because you don't seem like you want to toy with your phone. It's possible that those people that took that leak might have to do a little or perhaps a lot of things to eventually take the real OTA. This has happened with other phones. You don't seem like you want to do that much tweaking so just go to those threads and ask questions there and explain what exactly you are doing and the errors you are getting.
Click to expand...
Click to collapse
yeah i think ill give that a go again I guess. I used to be into rooting back when I had an S4 but it eventually just became to much of an issue everytime i wanted to install a new rom so I like to stick with stock. Thanks both of you I'll try again once Im home in a few minutes