I've been running CM 11 for a little more than a month and have been really enjoying it. So, I have no idea why I decided to download the MythTools and revert back to stock At&t. Doing so, I messed something up on my phone.
To start, I'm using Windows 7 64bit and when selecting option 1 (install ADB-fastboot-apkTools) I get the new cmd window that states "please select install button after new window is opened press any key to continue...." when I press any key the cmd window would just close. Hoping it would help, I then chose option 6 to update my Motorola drivers. When my browser window opened I got the ADB installer window and clicked install. It seemed to have installed fine. I then updated my moto drivers. Thinking I was all set I went for option 2 to flash the stock firmware which I had put in the firmware folder. With my phone in fastboot I started the process and it failed. Reading through the cmd prompts I had noticed it said something like 'you selected 2- instal cwm.img cannot load cwm.img' . I unplugged my phone and tried to restart it and it was stuck on the bootloader screen. I then restarted into recovery and my PhilZ recovery did start up. However it displays "E: could not mount /data to setup /data/media path!" . I was still able to go through the process of a clean re-install of CM 11 but am stuck on the startup splash screen for CM.
I definitely got myself in way too deep and am clueless on how to fix this. Would someone mind instructing me on what to try next? Many thanks in advance.
I am not sure if it would make a difference in your situation but I do everything for my phone on an x86 system. I have had issues with LG and Samsung phones in the past when trying things on an x64 computer.
ifixgse said:
I've been running CM 11 for a little more than a month and have been really enjoying it. So, I have no idea why I decided to download the MythTools and revert back to stock At&t. Doing so, I messed something up on my phone.
To start, I'm using Windows 7 64bit and when selecting option 1 (install ADB-fastboot-apkTools) I get the new cmd window that states "please select install button after new window is opened press any key to continue...." when I press any key the cmd window would just close. Hoping it would help, I then chose option 6 to update my Motorola drivers. When my browser window opened I got the ADB installer window and clicked install. It seemed to have installed fine. I then updated my moto drivers. Thinking I was all set I went for option 2 to flash the stock firmware which I had put in the firmware folder. With my phone in fastboot I started the process and it failed. Reading through the cmd prompts I had noticed it said something like 'you selected 2- instal cwm.img cannot load cwm.img' . I unplugged my phone and tried to restart it and it was stuck on the bootloader screen. I then restarted into recovery and my PhilZ recovery did start up. However it displays "E: could not mount /data to setup /data/media path!" . I was still able to go through the process of a clean re-install of CM 11 but am stuck on the startup splash screen for CM.
I definitely got myself in way too deep and am clueless on how to fix this. Would someone mind instructing me on what to try next? Many thanks in advance.
Click to expand...
Click to collapse
you said you are stuck on startup splash meaning bootloop? if it is you should try again with rsd lite.
else you may lose all your data in the memory but do a format media/data and sdcard, so that it can mount /data, it worked for me. then format system mount everyting and do a fresh install of any rom you can sideload or just have it in the sdcard.
I'm pretty sure I am doing something wrong with MythTools. When I select option 2 in the tool to install stock firmware the following happens,
- asks for fimware folder example and I select "N"
- asks if firmware files are finished copying.. I press enter and continue
-then it says "the system cannot find the path specified
the system cannot find the path specified
the system cannot find the path specified
'7z' is not recognized as an internal or external command
operable program or batch file
Are you ready to flash stock fimware...
at this point i stupidly hit enter and that was it with my phone. I'm guessing the tool could not locate the firmware .xml file for extracting and I have no idea why. The compressed folder is IN the firmware folder.
One other question with Mythtools, when installing the tools what path do you want them installed in? I did them in the same file the Myth tools are in.
ifixgse said:
I'm pretty sure I am doing something wrong with MythTools. When I select option 2 in the tool to install stock firmware the following happens,
- asks for fimware folder example and I select "N"
- asks if firmware files are finished copying.. I press enter and continue
-then it says "the system cannot find the path specified
the system cannot find the path specified
the system cannot find the path specified
'7z' is not recognized as an internal or external command
operable program or batch file
Are you ready to flash stock fimware...
at this point i stupidly hit enter and that was it with my phone. I'm guessing the tool could not locate the firmware .xml file for extracting and I have no idea why. The compressed folder is IN the firmware folder.
One other question with Mythtools, when installing the tools what path do you want them installed in? I did them in the same file the Myth tools are in.
Click to expand...
Click to collapse
Disclaimer: Even though this worked for me I am not responsible if you brick your phone, I am simply sharing my experience
Okay, this is not for the faint of heart and is going to sound a little backward but it just worked for me 5mins ago. I am running Windows 8.1 Pro 64bit, so there shouldn't be a problem with your setup. I was having the same problem until I just double clicked on flashing.bat or main.bat instead of running as admin. After all I AM the admin of my PC. Then, it worked perfect...until flashing the tz.mbn file and froze up while writing the file. I thought mmm...it shouldn't take that long to write such a small file, and writing happens on the phone side (I believe) so I hit the phone's power button while leaving the Myth Tools window open, which disconnected the phone obviously. I booted back into fastboot and it continued from where it left off. (Note: I did this a few weeks ago when I lost my radios and manually flashed the modem file, which froze, but I followed the same procedure and it successfully flashed it) Then when it got to the last system.img chunk (it writes it in small chunks of 30mb and the last one is smaller, that's how I knew it was the last one) it froze again. I let it sit for about 5mins just to make sure it was written to the phone the repeated the sequence to reboot manually into fastboot and bang, once again it continued right where it left off. one or two more freezes and voila...it rebooted right back to stock. Any questions don't hesitate to ask.
If this helps you hit that thanks button!
I have been struggling around a lot with my Xperia T
One thing that struck my attention is that every howto on how to get into flash or fastboot mode states that you just push up or down and plug in the USB to get into Fastboot resp. Flash mode.
On my phone that does not work and never did.
How to get into Fastboot mode
- switch off phone
- push vol up
- plug in USB
- now push on/off too until phone vibrates
- release on/off button first and off you go into Fastboot (blue led)
How to get into Flash mode
- switch off phone
- push vol down
- plug in USB
- now push on/off too until phone vibrates
- release on/off button first and off you go into Flash mode (green led)
Hope with this I can save some people a lot of time searching how to get the damned thing into the good mood (mode)
I want to add some information for people like me who don't have a steep learning curve.
What you need to obtain for yor Xperia T:
- Flashtool (very handy to flash a custom Sony Xperia Rom when you're stuck somewhere) http://www.flashtool.net/download.php
- minimal adb and fastboot to be able to flash a boot.img of your choice http://forum.xda-developers.com/showthread.php?p=42407269
- ftf files to flash to your phone with Flashtool http://xperiafirmware.com/8-firmware/18-sony-xperia-t-lt30
- a decent boot.img http://teamw.in/project/twrp2/143 (I prefer TWRP over CWM)
the files ar on http://techerrata.com/browse/twrp2/mint the page is a bit confusing. To get your hands on the desired file just tick on F5 to reload the page, it helps. I used openrecovery-twrp-2.7.0.1-LT30p.img
- A 4.3 ROM http://forum.xda-developers.com/showthread.php?t=2681208 or http://forum.xda-developers.com/showthread.php?t=2677235
Put the zip files on your micro sd card in the phone
I used LT30p_unsigned_031414_094356.zip and UPDATE-SuperSU-v1.89.zip
First: if anything goes realy wrong, don't blame me, it's your own risk.
Install Flashtool and Minimal ADB and Fastboot
-Practice a few times how to get your phone into fastboot and flash mode, so you don't have to panic in case everything goes wrong.
- Always start with a full battery.
Practice a little with adb and fastboot.
- go to the command prompt in Windows get your phone into fastboot mode and issue the command: 'fastboot devices'
There are plenty howtos on adb and fastboot, see for yourself
I suggest to start realy simple by flashing one of many ftf files to your phone.
Why? Flashing an ftf file is the easy recovery to restore your phone.
Download any ftf file (for Xperia T of course) and put it in c:\flashtool\firmwares directory
Start Flashtool, click on the flash on the left, choose a file and start flashing.
Don't adapt any settings, just flash straightforward.
Halfway in the proces Flashtool asks to put your phone into flashmode again; don't ask why, just do it.
After a few minutes you have flashed your first stock rom.
Next step is to install a 4.3 zip file you downloaded from XDA.
Put a TWRP image into the adb and fastboot directory of your computer.
(as I said, I prefer TWRP over CWM and it works, don't ask me how or why, it works)
Go to the command prompt in the adb and fastboot directory
Attach your phone in fastboot mode.
issue the command : fastboot devices to be shure you're connected.
Search your img file
type fastboot flash boot openrecovery-twrp-2.7.0.1-LT30p.img
If it doesn't work issue a ctrl-c, disconnect your phone, connect it again into fastboot mode, control the connection by asking fastboot devices and again issue the command: fastboot flash boot example-filename.img
It will work.
And when it works you'll end up with a rooted device.
As you have already put your zipfiles on the micro sd card you can go ahead right away.
TWRP is easy to use.
Again my phone refused to react properly in the first place, but I tried a few times, wiped everything I could wipe, in my case I even erased the internal SD card.
TWRP warned me not to reboot because there was no operating system present.
So I installed LT30p_unsigned_031414_094356.zip again and it worked.
After that install UPDATE-SuperSU-v1.89.zip
Reboot your phone and everything is set.
If afterwards you want to install TWRP again on your phone, just go to Google Play and install it.
It's easy as that.
And remember, if everything goes wrong, try to get into flash mode (you did practice how to do it, didn't you), flash an ftf file and your phone is restored.
Hein
I have done this a number of times, but after a few weeks I tend to forget the steps and what items are needed. Therefore, your write-up is very useful indeed.
Especially those advisory threads which include a number links to other threads for the subject which I want to learn about, these are really a bad habbit at XDA.
A couple of days ago my Huawei p7 started to shut itself down and after that it keeps rebooting.
It starts itself up and I get into the choose your language screen and then it shuts down.
When i try to get into the system recovery (using volume & power) I get the following screen:
Android system recovery <3e>
Huawei software installed failed.
Please retry!
Shutdown system now
There is no UPDATE.APP
.............................................
FAIL
And even in system recovery it keeps rebooting.
Im kinda helpless at the moment not knowing what to do.
Did this occur to anyone ? Is there a solution for this problem ?
Thanks in advance.
You should download firmware update file from Huawei Official web site. Extract dload folder from downloaded archive and put it on your SD card. After that you should try to trigger firmware update with factory reset (method which is usually called "force update") by holding all three buttons when the phone is turned off.
But maybe your phone have some hardware problem if it restarts even in recovery mode.
UPDATE:
Does phone restarts itself when it's in fastboot mode (you can get into that mode by holding VOLUME DOWN and POWER button while phone is turned off and connected into USB port of computer just before pressing that button combination) ??
wekii said:
You should download firmware update file from Huawei Official web site. Extract dload folder from downloaded archive and put it on your SD card. After that you should try to trigger firmware update with factory reset (method which is usually called "force update") by holding all three buttons when the phone is turned off.
But maybe your phone have some hardware problem if it restarts even in recovery mode.
UPDATE:
Does phone restarts itself when it's in fastboot mode (you can get into that mode by holding VOLUME DOWN and POWER button while phone is turned off and connected into USB port of computer just before pressing that button combination) ??
Click to expand...
Click to collapse
I've downloaded the update file and proceeded with your steps. I continued to trigger the firmware update with the factory reset.
At first it seemed to work, the phone started updating but after a couple of seconds it started to reboot itself again
I got the phone in fastboot mode and at this moment it does not restart itself !
I went on downloading Hisuite and at this moment it keeps searching for drivers on the network.
The searching for drivers is taking quite some time is this normal ?
Thank you very much for your help so far !
OK, maybe these are good news if you say that your phone doesn't restart when it's in fastboot mode.
I would recommend you to try to reflash your phone's stock recovery and boot images with those extracted from firmware that you are trying to install.
Follow these steps:
Download Huawei Extractor tool from here,
Open update.app with Huawei Extractor and extract next two images: RECOVERY and BOOT (you can do that by selecting those two images while holding CTRL button, then right click > Extract Selected),
When extracted, rename those two images into "recovery.img" and "boot.img",
Copy those two images into "platform-tools" folder of Android SDK,
Run command prompt and go to "platform-tools" folder by using "cd" command,
Start your phone into fastboot mode,
Enter following command into command prompt: "fastboot devices" (without quotes), you should get your phone's serial number listed, if that's right, go to the next step,
Enter: "fastboot oem get-bootinfo", it needs to say that your bootloader is unlocked. If it's not you need to enter the next command "fastboot oem unlock 1234567812345678", where "1234567812345678" should be replaced with unlock code that is unique for your device. Instructions which explain how to obtain unlock code for your device can be found here,
Flash your phone's recovery with "fastboot flash recovery recovery.img",
Flash your phone's boot image with: "fastboot flash boot boot.img",
After successful flashing of both images, turn your phone off by holding POWER button for a several seconds,
Prepare SD card on your PC by formatting SD card and copying "dload" folder of phone's firmware onto SD card,
After you insert SD card into phone, start your phone with "forced install" method by holding all three buttons on your phone.
After that your phone should process firmware install successfully if there is no some hardware issues. Good luck and inform us about your progress.
wekii said:
OK, maybe these are good news if you say that your phone doesn't restart when it's in fastboot mode.
I would recommend you to try to reflash your phone's stock recovery and boot images with those extracted from firmware that you are trying to install.
Follow these steps:
Download Huawei Extractor tool from here,
Open update.app with Huawei Extractor and extract next two images: RECOVERY and BOOT (you can do that by selecting those two images while holding CTRL button, then right click > Extract Selected),
When extracted, rename those two images into "recovery.img" and "boot.img",
Copy those two images into "platform-tools" folder of Android SDK,
Run command prompt and go to "platform-tools" folder by using "cd" command,
Start your phone into fastboot mode,
Enter following command into command prompt: "fastboot devices" (without quotes), you should get your phone's serial number listed, if that's right, go to the next step,
Enter: "fastboot oem get-bootinfo", it needs to say that your bootloader is unlocked, if it's not read this,
Flash your phone's recovery with "fastboot flash recovery recovery.img",
Flash your phone's boot image with: "fastboot flash boot boot.img",
After successful flashing of both images, turn your phone off by holding POWER button for a several seconds,
Prepare SD card on your PC by formatting SD card and copying "dload" folder of phone's firmware onto SD card,
After you insert SD card into phone, start your phone with "forced install" method by holding all three buttons on your phone.
After that your phone should process firmware install successfully if there is no some hardware issues. Good luck and inform us about your progress.
Click to expand...
Click to collapse
Hi,
I've got the same issue.
When I start to "force install" method, my phone doesn't boot.
It just stay in a state of "charging" but nothing append.
I flashed boot and recovery with Fastboot.
But now, when I start the phone in Fastboot&Rescue Mode, the device doesn't appear in the liste when I run adb devices.
But when I start in the "force install" mode, adb devices returns the serial of the phone (but it doesn't respond to fastboot command).
Are there other files to flash on the phone than juste recovery and boot ?
Thank's for those steps, i'll continue to try to flash again.
Edit :
Ok phone is back !
The problem came from my SD Card, I had not only the dload folder, but an other file.
Format SD Card -> dload folder -> "force install" method -> ENJOY !
Thank's a lot !
wekii said:
OK, maybe these are good news if you say that your phone doesn't restart when it's in fastboot mode.
I would recommend you to try to reflash your phone's stock recovery and boot images with those extracted from firmware that you are trying to install.
Follow these steps:
Download Huawei Extractor tool from here,
Open update.app with Huawei Extractor and extract next two images: RECOVERY and BOOT (you can do that by selecting those two images while holding CTRL button, then right click > Extract Selected),
When extracted, rename those two images into "recovery.img" and "boot.img",
Copy those two images into "platform-tools" folder of Android SDK,
Run command prompt and go to "platform-tools" folder by using "cd" command,
Start your phone into fastboot mode,
Enter following command into command prompt: "fastboot devices" (without quotes), you should get your phone's serial number listed, if that's right, go to the next step,
Enter: "fastboot oem get-bootinfo", it needs to say that your bootloader is unlocked, if it's not read this,
Flash your phone's recovery with "fastboot flash recovery recovery.img",
Flash your phone's boot image with: "fastboot flash boot boot.img",
After successful flashing of both images, turn your phone off by holding POWER button for a several seconds,
Prepare SD card on your PC by formatting SD card and copying "dload" folder of phone's firmware onto SD card,
After you insert SD card into phone, start your phone with "forced install" method by holding all three buttons on your phone.
After that your phone should process firmware install successfully if there is no some hardware issues. Good luck and inform us about your progress.
Click to expand...
Click to collapse
I followed all your steps but i get stuck at step 7. When I give the command fastboot devices it doesn't show my phone's serial number. Instead it shows a ? (question mark).
Did I do something wrong or is there a solution for this?
Thanks in advance!
Maybe you should try other version of platform tools. I would recommend you to download adt-bundle-windows-x86_64-20140702.zip (x64) or adt-bundle-windows-x86-20140702.zip (x32) from "Android SDK" official web pages (I assume that your are using Windows OS). After download extract only "platform-tools" directory to the root of Windows C:\ partition and try described procedure again.
However if you are still getting question marks instead of phone's serial number, you should ignore that step and go onto the next one. I had the same problem in the past and flash commands were successful even serial number wasn't been displayed.
Keep us informed about your progress. Good luck zbnd !!
wekii said:
Maybe you should try other version of platform tools. I would recommend you to download adt-bundle-windows-x86_64-20140702.zip (x64) or adt-bundle-windows-x86-20140702.zip (x32) from "Android SDK" official web pages (I assume that your are using Windows OS). After download extract only "platform-tools" directory to the root of Windows C:\ partition and try described procedure again.
However if you are still getting question marks instead of phone's serial number, you should ignore that step and go onto the next one. I had the same problem in the past and flash commands were successful even serial number wasn't been displayed.
Keep us informed about your progress. Good luck zbnd !!
Click to expand...
Click to collapse
Thanks for your response !
So I followed through like you said. Gave the fastboot oem get-bootinfo command and then I got (bootloader) locked. So I followed the bootloader's unlock code (official way), entered my product SN and product IMEI, used the Huawei Product ID generator followed the procedure and all I get is : Please input the correct Product ID
What did I do wrong this time ? I'm not sure if it's even possible to do this wrong. Is there another way around ?
You can unlock with Vroot, like I did. I didn't try to get a serial from Huawei.
For the Fastboot command 'Fastboot device's I had a ? too, but with 'adb devices' command, I got my serial number.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Pboguet said:
You can unlock with Vroot, like I did. I didn't try to get a serial from Huawei.
For the Fastboot command 'Fastboot device's I had a ? too, but with 'adb devices' command, I got my serial number.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
I've downloaded Vroot (english version) but when i connect my phone it says not support mode
I tried to connect while in fastboot&rescue mode, because this is the only way the phone stays on without restarting.
I then tried to connect without fastboot&rescue mode. But my phone keeps rebooting. I did get a message that USB debugging is disabled. However I can't enable usb debugging because my phone won't boot up normally.
@Pboguet
You should read carefully because your answer has no sense for the phone which is in state like zbnd's phone is.
@zbnd
Maybe you are doing something wrong. You can send me your's phone serial number and IMEI in PM inbox, I will try to generate unlock code for you.
wekii said:
@Pboguet
You should read carefully because your answer has no sense for the phone which is in state like zbnd's phone is.
@zbnd
Maybe you are doing something wrong. You can send me your's phone serial number and IMEI in PM inbox, I will try to generate unlock code for you.
Click to expand...
Click to collapse
Thank you very much for all your help!
Despite following all your steps my phone keeps rebooting
Sorry to hear that. Did you manage to make all steps that I described to you? Can you share more informations about your current efforts please.
wekii said:
Sorry to hear that. Did you manage to make all steps that I described to you? Can you share more informations about your current efforts please.
Click to expand...
Click to collapse
Ik
After unlocking my phone I got the message unlocked in CMD.
I then flashed recovery and boot. Both times it said that the flash was succesfull, this only took a few seconds I don't know if thats normal? I then followed your last steps ( dload folder etc) and put the SD card in my phone.
It start installing but after approximetaly 25 seconds the phone shuts itself down and then reboots.
The procedure then starts again and it starts installing followed by shutting down and rebooting.
I'm sorry to hear that. Seems like it's some hardware issue.
However I still have one more idea that you can try in fastboot mode. I would recommend you to install entire firmware manually with fastboot commands.
By following previously described procedure try to extract with "Huawei Extractor" tool next images also: SYSTEM, USERDATA, CUST and CACHE.
After step number 10, try to use next commands also:
"fastboot flash system system.img"
"fastboot flash cust cust.img"
"fastboot flash userdata userdata.img"
"fastboot flash cache cache.img"
When you are finished with flashing of all images, use "fastboot reboot" command to restart your phone. Steps 11, 12 and 13 should be ignored this time.
Let me know the result
Hey, I'm glad I found this forum, because I have exactly the same problem! Since zbnd did not reply I wanted to let you know that flashing boot.img, recovery.img, cache.img, userdata.img, cust.img and system.img via fastboot did not work
The commandline for each file said "OKAY" and "finished" therefore I assume the process(es) completed succesfully.
Maybe I should tell you some information and the steps I did with my P7:
- my device is a branded german telekom version with firmware P7-L10-V100R001C150B122- because of crappy pink telekom bootlogo und bloatware I wanted to flash the original huawei firmware so I downloaded the B126 from the official website and updated via force update method- at the end of the update process i got the messages "huawei cust fail" and "update_post_process fail" but when I rebootet the B126 was installed and showed a message "Defect report reminders - This is an internal test version. Please report defects to Yangyexiao 00143718" - can't be correct, I thought- after googling a lot and reading through several forums I rooted my device with RootGenius, installed HiSuite and Android-SDK (driver were installed correctly, adb devices showed a device with serial) and deleted the "cust" directory on my phone - at that point everything still worked- next step: I installed TWRP 2.7.1.0, made an updateable zip file with huawei update extractor (including system.img, userdata.img, cust.img and boot.img) and flashed it via TWRP. The process completed succesfully, but needed only a few seconds. After that I got this bootloop at the language selection- then I wanted to return to the last functioning state, so I flashed the stock recovery via fastboot and started with force update method. But after a few seconds the device rebooted during the update process which led to another (maybe the same) bootloop. I had to remove the sd card, but the device continued to reboot in recovery mode. So i installed TWRP 2.7.1.0 again- Then I tried to restore a B133 backup I got from another forum, but it obviously did not work (see attached image)
Now I just don't know what to do ... I get a bootloop in stock recovery and I get a bootloop in TWRP 2.8.0.0.
Only TWRP 2.7.1.0 does not reboot. What is about the other files inside the UPDATE.APP (modemimage.img, efi.img, etc)? Is it possible that some of these files are needed?
Thanks in advance...
mbert said:
Hey,
Only TWRP 2.7.1.0 does not reboot.
Thanks in advance...
Click to expand...
Click to collapse
If this recovery works than try:
1. Save this Se7en or this HRT or this custom MIUI ROM on SD card
2 .Wipe in TWRP everything (dalvik, system,data,cust, internal) except external (SD card). Internal only if You have a backup or not important data there.
4. Install zipp ROM from external memory. Sometimes try more than one time in fail case. For HRT ROM especially.
Let me know if helped.
Ziółek said:
If this recovery works than try:
1. Save this Se7en or this HRT or this custom MIUI ROM on SD card
2 .Wipe in TWRP everything (dalvik, system,data,cust, internal) except external (SD card). Internal only if You have a backup or not important data there.
4. Install zipp ROM from external memory. Sometimes try more than one time in fail case. For HRT ROM especially.
Let me know if helped.
Click to expand...
Click to collapse
failed
I tried se7en and miui.
I wiped dalvik,system,data,internal,cache and custom, which only lasted about 2 seconds, but said succesful (Is that enough to delete all partitions?).
Installation of both custom roms completed succesfully and lastet several seconds (max 1 min I think).
Se7en: reboot -> huawei logo -> reboot -> language selection (in the style of stock rom?) -> reboot ...
Miui: reboot -> miui logo -> reboot -> language selection (miui style) -> reboot -> wifi selection (I skipped) -> searching for sim card -> reboot
mbert said:
Hey, I'm glad I found this forum, because I have exactly the same problem! Since zbnd did not reply I wanted to let you know that flashing boot.img, recovery.img, cache.img, userdata.img, cust.img and system.img via fastboot did not work
The commandline for each file said "OKAY" and "finished" therefore I assume the process(es) completed succesfully.
Maybe I should tell you some information and the steps I did with my P7:
- my device is a branded german telekom version with firmware P7-L10-V100R001C150B122- because of crappy pink telekom bootlogo und bloatware I wanted to flash the original huawei firmware so I downloaded the B126 from the official website and updated via force update method- at the end of the update process i got the messages "huawei cust fail" and "update_post_process fail" but when I rebootet the B126 was installed and showed a message "Defect report reminders - This is an internal test version. Please report defects to Yangyexiao 00143718" - can't be correct, I thought- after googling a lot and reading through several forums I rooted my device with RootGenius, installed HiSuite and Android-SDK (driver were installed correctly, adb devices showed a device with serial) and deleted the "cust" directory on my phone - at that point everything still worked- next step: I installed TWRP 2.7.1.0, made an updateable zip file with huawei update extractor (including system.img, userdata.img, cust.img and boot.img) and flashed it via TWRP. The process completed succesfully, but needed only a few seconds. After that I got this bootloop at the language selection- then I wanted to return to the last functioning state, so I flashed the stock recovery via fastboot and started with force update method. But after a few seconds the device rebooted during the update process which led to another (maybe the same) bootloop. I had to remove the sd card, but the device continued to reboot in recovery mode. So i installed TWRP 2.7.1.0 again- Then I tried to restore a B133 backup I got from another forum, but it obviously did not work (see attached image)
Now I just don't know what to do ... I get a bootloop in stock recovery and I get a bootloop in TWRP 2.8.0.0.
Only TWRP 2.7.1.0 does not reboot. What is about the other files inside the UPDATE.APP (modemimage.img, efi.img, etc)? Is it possible that some of these files are needed?
Thanks in advance...
Click to expand...
Click to collapse
To use fastboot you need to unlock bootloader first. And before flash, you need to erase partition first, for a proper job. Please read well about the fastboot procedure is a dangerous procedure
My bootloader is unlocked, but fastboot sais I don't have permission to erase partitions ...
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Hi there.
I thought i'd try and get the 4.4 update for my Xperia SP as it was lagging a lot and causing me a lot of headache. So spent most of the day trying to figure out how to download CyanogenMod.. and i've got up to Now send the package you want to apply to the device with "adb sideload <filename>... I don't even know how to do that as I'm not techy at all
Was i supposed to send the package to the sd card before doing all this process? I wiped the data rom thing but had backed it up onto SD card before doing that. I restored it so I could try and move the package from the computer to my SD card but my phone just stays on a black screen
Have I broken my phone? Someone please help me as frustrated is an understatement right now. Not to mention crying like a little baby.....
Thanks in advance.
You must connect your sd card to pc through recovery or sd adaptor ( if your phone isn't booting), and extract kernel (boot.img) from the rom zip to your pc and flash the kernel (boot.img) with flashtool on fastboot mode, then enter on recovery and flash the rom zip
Methods
thewinterman said:
Hi there.
I thought i'd try and get the 4.4 update for my Xperia SP as it was lagging a lot and causing me a lot of headache. So spent most of the day trying to figure out how to download CyanogenMod.. and i've got up to Now send the package you want to apply to the device with "adb sideload <filename>... I don't even know how to do that as I'm not techy at all
Was i supposed to send the package to the sd card before doing all this process? I wiped the data rom thing but had backed it up onto SD card before doing that. I restored it so I could try and move the package from the computer to my SD card but my phone just stays on a black screen
Have I broken my phone? Someone please help me as frustrated is an understatement right now. Not to mention crying like a little baby.....
Thanks in advance.
Click to expand...
Click to collapse
Your phone is broken. Now you can throw it away and hope for the best.
Okay I was kidding!
To get your phone back, you may need to at least know how to use a Flashtool. But don't worry I'll point out one by one.. I recommend viewing this post on a desktop browser, as Tapatalk does not show nested [ hide ] correctly.
The prerequisites are a Williams Kernel v7 (Direct DL link) and Flashtool and a custom ROM's .zip of your choice.
Put the custom ROM zip into your SD card by any means possible. Or you may use a OTG cable to connect to a flash drive.
Install flashtool
Execute the drivers installer located within "drivers" folder inside Flashtool's install directory (default C:\Flashtool\drivers)
Tick "flashmode drivers", "fastboot drivers" and lastly scroll down a little bit, find "Common drivers for Viskan board" and tick that as well. Finish the installation
Open flashtool. Make sure you ran it as an administrator to avoid conflicts.
Hit the lightning icon
Choose fastboot mode
Hit "Select kernel to flash"
Navigate to and select the downloaded kernel earlier. You may unable to see your kernel. Please change the file type from "*.sin" to "*.elf".
Continue. This will ask you to connect your XSP in fastboot mode. To do so, make sure your phone is turned off completely, hold volume rocker up and connect it to your computer. Once the LED bar lights blue, you may release the volume rocker.
Flashing process will run. It is important not to interrupt the process!
Once complete, remove the cable from your phone and turn it on.
Hit volume up when the lights blink to get into CWM recovery
From another guide:
3) Flashing the custom ROM
You can navigate in CWM by using the volume and power keys or by swiping the screen up, right, down, left.
NOTE: Please understand methods are vary for different ROMs. Please prioritise steps provided in a custom ROM thread. This guide however, can be regarded as a "logic" for you to flash such custom ROM.
Wipe everything you can.
WARNING: Please be careful to not wipe the /boot.
go to "Mounts and storage"
Format /system
Format /data
Format /cache
Go back to main menu
Get into "Advanced" > "Clear Dalvik Cache" (this is quite optional)
Go back to main menu
Attempt "Wipe data/factory reset"
Flash the custom ROM zip you've downloaded.
Go to "Install zip"
Choose "Choose zip from /storage/sdcard1" (I am assuming you've put the zip into your SD card)
Navigate to the zip you've copied, and select it
Choose "yes"
Flash gapps. The flashing process is similar to how you flashed the custom ROM zip based on the steps above.
Reboot the phone
You now have your preferred custom ROM installed! Congratulations! Set up your phone as usual now.
Restore your applications backup if you wish to have your apps back.
Your steps end here.
Click to expand...
Click to collapse
If you want to learn more: [Guide] How to use Flashtool
TechnoSparks said:
Your phone is broken. Now you can throw it away and hope for the best.
Okay I was kidding!
To get your phone back, you may need to at least know how to use a Flashtool. But don't worry I'll point out one by one.. I recommend viewing this post on a desktop browser, as Tapatalk does not show nested [ hide ] correctly.
The prerequisites are a Williams Kernel v7 (Direct DL link) and Flashtool and a custom ROM's .zip of your choice.
Put the custom ROM zip into your SD card by any means possible. Or you may use a OTG cable to connect to a flash drive.
Install flashtool
Execute the drivers installer located within "drivers" folder inside Flashtool's install directory (default C:\Flashtool\drivers)
Tick "flashmode drivers", "fastboot drivers" and lastly scroll down a little bit, find "Common drivers for Viskan board" and tick that as well. Finish the installation
Open flashtool. Make sure you ran it as an administrator to avoid conflicts.
Hit the lightning icon
Choose fastboot mode
Hit "Select kernel to flash"
Navigate to and select the downloaded kernel earlier. You may unable to see your kernel. Please change the file type from "*.sin" to "*.elf".
Continue. This will ask you to connect your XSP in fastboot mode. To do so, make sure your phone is turned off completely, hold volume rocker up and connect it to your computer. Once the LED bar lights blue, you may release the volume rocker.
Flashing process will run. It is important not to interrupt the process!
Once complete, remove the cable from your phone and turn it on.
Hit volume up when the lights blink to get into CWM recovery
From another guide:
If you want to learn more: [Guide] How to use Flashtool
Click to expand...
Click to collapse
Sorry for the late reply. But thank you so much! Spent 15 hours trying to fix the darn thing. Only got 3 hours of sleep :-/ I am enjoying a fresher new faster phone. So thank you so much, you are awesome!
thewinterman said:
Sorry for the late reply. But thank you so much! Spent 15 hours trying to fix the darn thing. Only got 3 hours of sleep :-/ I am enjoying a fresher new faster phone. So thank you so much, you are awesome!
Click to expand...
Click to collapse
Nice! Have fun with your fixed phone!
Bravo!!!
You are a life saver man..I got my Xperia SP back by your guide.
Best Wishes..
Hi,
I am really desperate! I turned on my rooted Asus MeMO Pad 7 ME176CX after several months of no use, but apps/services won't load (loads of error messages, all apps/services stopped etc.) like it was obsolete or screwed up. So I unrooted it and the issue got worse!
There is a Asus demo app in the notification bar that disables WIFI and software reset and says to plug in the power adapter (no difference, it won't go away).
1) I copied the necessary files to my memory card (to get rid of the Asus demo app as per other threads) but once I insert the memory card, even though it is recognized, it says no files present.
2) I did a hard reset with Vol - (or +, tried both) and Power but nothing happens (no recovery screen, it just stays black).
3) I removed the battery & waited 10 mins, no difference.
4) I formatted a card to FAT32 and copied the cleardata.zip unzipped files from Asus then rebooted pressing just Power but it just reboots normally like the card is not inserted.
Now basically the tablet shows a few apps (Calendar, Gallery etc.) and nothing else.
I cannot connect to wifi, bluetooth does not work, the memory card says no files present, vol + power does not work, cleardata trick did not work, I cannot send it back under warranty (ex-rooted) ... what else can I do??????
Many thanks!
Reboot into Droidboot (Volume Down + Power IIRC, could be up), boot the Temporary TWRP (http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096), flash ROM
After a few experiments gone wrong I have now bricked the tablet for good (erased all data).
I can ONLY go from the dead droid to 'Android system recovery' which shows:
- reboot
- apply update from ADB
- wipe data
- wide cache
After 'wiping' the only option available is 'Apply update from ADB', so I installed ADB on my Mac and downloaded a few ROMs from the Asus site (even though their page says ME176C not ME176CX, but there is no ME176CX page there).
If I run adb devices from the terminal I see nothing. Only if I select 'Apply update from ADB' on the tablet I see the device from terminal, I believe it opens a bridge to the computer only with this option running. The command 'fastboot devices' never shows anything regardless.
I run 'adb sideload update.zip' (tried with several ROMS) but it always fails AFTER the transfer (either with messages 'status 0' or 'end of footer not 0xFFFF' etc.).
So now I am stuck with adb sideload never working, is there anything else I can do????
boredfish said:
After a few experiments gone wrong I have now bricked the tablet for good (erased all data).
I can ONLY go from the dead droid to 'Android system recovery' which shows:
- reboot
- apply update from ADB
- wipe data
- wide cache
After 'wiping' the only option available is 'Apply update from ADB', so I installed ADB on my Mac and downloaded a few ROMs from the Asus site (even though their page says ME176C not ME176CX, but there is no ME176CX page there).
If I run adb devices from the terminal I see nothing. Only if I select 'Apply update from ADB' on the tablet I see the device from terminal, I believe it opens a bridge to the computer only with this option running. The command 'fastboot devices' never shows anything regardless.
I run 'adb sideload update.zip' (tried with several ROMS) but it always fails AFTER the transfer (either with messages 'status 0' or 'end of footer not 0xFFFF' etc.).
So now I am stuck with adb sideload never working, is there anything else I can do????
Click to expand...
Click to collapse
Well, theres quite a lot of options do recover your tablet, before doing anyhing, if you have access to adb, then you should do: download .17 rom and extract it, after extracting go to META-INF\com\google\android\updater-script and open it with notepad, and remove the first 2 lines, then save, and make the zip file (rename it to update.zip {careful not to make the file "update.zip.zip"}), then put the zip file in adb folder (for me its C:\\adb) and do adb push update.zip /sdcard/ (make sure adb is working) after it finishes pushing, go to bootloader (if not there already) and run temp recovery (twrp or cwm), and then install the zip, then clear dalvik and cache, and reboot, if first reboot doesnt work, reboot again, if it still doesnt work, install update.zip again. Hope i helped, if u have any questions tell me :3
=====
edit
=====
if you really cant get out of recovery theres still a way of fixing your tablet (same problem happend to me today and its fixed), if you already did all the steps above on the download .17 and extracting and changing the file of updater script then its already almost done, to access the bootloader you need to shutdown your tablet, press Power, Vol+ and Vol- at same time, it will go to fastboot, copy the file "droidboot.img" from the update.zip and place it in the adb folder (for me its c:\\adb), then do "fastboot boot droidboot.img" and it should download the img to the tab and boot to droidboot (you need to do this a few times, because 5/1 only 1 goes to bootloader), after booting to droidboot you can easily recover from there, on bootloader you have adb access, which means you can push the update.zip to the tablet (with update.zip in adb folder already, do on cmd, "adb push update.zip /sdcard/") after pushing go to temp recovery and install the update.zip normally after installing. format cache and dalvik, and reboot, if its stuck on logo, shutdown and reboot, if still doesnt work install the update once more by turning your device off and go to bootloader normally, (it works now, because it has the software now, (to enter bootloader press press power + vol-), and load temp recovery and reinstall). i hope i helped