[q] atom rom cfw - RAZR i Q&A, Help & Troubleshooting

I was reading on a French website about Atom Rom and how it was the best rom for the Razr I, however, I'm not sure whether it would brick my phone, or something! I only ever trust downloads from XDA and I was wondering if anyone could give me the download link for Atom Rom for the XT890 and a simple tutorial on how to install it? It worried me that you had to use your PC to install it? Normally I just flash if via CWM!
Okay thanks

Related

[HOWTO] root Koodo version of Optimus One P500h 10v

!!ATTENTION!!
THIS INFORMATION HAS BECOME OUTDATED. ​
There are probably newer and easier ways of accomplishing your goals that are now available. Read the entire thread for tips from other people about how to get your phone rooted - their suggestions are likely to be better options for your needs. I will not be maintaining this thread, but I will leave it up as a record for others to read. Good luck!
_______________________________________________
Original Post:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/product/support-product-profile-mobile-redux.jsp?customerModelCode=Optimus%20One%20P500&initialTab=drivers&targetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.
Nice write-up, I had to follow a similar path. The most trouble I had was finding a firmware that worked.. I ended up using the same TELUS firmware. It works great, much faster than the original Koodo firmware.
Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500
I wished you wrote this yesterday but thanks. I figured it out yesterday . This is the sickest 150$ phone I have ever had. I get 1100 quadrant score :O
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.
i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform
i had to manually sign the adb driver on w7 64
using
dseo13b.exe
after signing the driver, adb connects and I loaded custom recovery
I am installing custom rom now.
thnkas.
downgrade
hi im from philippines
i want to downgrade from 2.2.1 to 2.2
can i use the firmware above?
if not can you help me find a suitable fw that i can use here in philippines?
i found some links where dead
leegoon84 said:
i downgraded to 22
rooted
now i want to install the custom fw.
copied both files from the link for custom flash.
and i can't get into adb
device not found
win7 64bit
all the drivers are installed and yet I have yellow ! icon on adnroid single adb platform
Click to expand...
Click to collapse
Ok. I don't really get why you mentioned this stuff.
Taylortron3030 said:
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
Click to expand...
Click to collapse
andy572 said:
Sorry for my question: what is the difference between your P500h and the other P500 devices? is it a branded device with special firmware?
I thought, all P500 can be flashed with every P500 *.kdz (for country) or XDA ROMs
for P500
Click to expand...
Click to collapse
Like I said, I dunno. So, I'm sorry too.
Taylortron3030 said:
Hi. Thanks for that.
Also, if you want to, feel free to answer any of the questions that come up in the thread. You definitely are better equipped than I am.
Edit: Just so you know, it seems the link to zubu.ca is not working. When I clicked on it chrome said "Oops! This link appears to be broken.".
Click to expand...
Click to collapse
Fixed the link
this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?
Thank you, I thought I broke the phone when I flashed V10A_00, it wouldn't boot into screen. Telus one indeed is nicer than Koodo's.
peacekeeper05 said:
this may be off topic but what are the custom roms that you can flash to p500h? any one tried installing one?
Click to expand...
Click to collapse
mik_os Gingerbread based on CM7
andy Gingerbread Based on CM7
the following are all froyo
lol
void
darkmoon
megatron prime
and others
I use mik 2.3 beta4, still the best and snappiest with adw launcher o/c to 320 min 768 max.
sorry for the newbie question. i just bought the Koodo version but am on telus network. So should i follow procedure in the first post?
Kwen said:
If you want a stock, rooted 2.2.1 (Telus V10S - same as Koodo's stock V10v)
You'll need a custom recovery to flash it: [DEV] Custom Recovery P500/Thunderg
http://zubu.ca/o1/LGP500hAT-00-V10s-TLS-CA-JAN-26-2011_signed.zip
Click to expand...
Click to collapse
Thanks Kwen! This is very useful - now no need for the kdz updater.
Edit: or now we can keep the Koodo version of 2.2.1 and just root it using Gingerbreak (http://forum.xda-developers.com/showthread.php?t=1044765) - no KDZ needed, no recovery needed (prior to root). Obviously, recovery is still recommended after root.
the only question that i have is where can i GET the stock 2.2.1 for my provider? i'm with Koodo, and i live the custom roms, but i need to flash back to stock to see if i can get my mms working correctly again. and i apologize in advance if this is the wrong thread.
Taylortron3030 said:
Hi. I had trouble getting my Optimus One from Koodo Mobile rooted. So, here is some info that I hope will help others get through the process a bit faster. I mainly followed the instructions in various threads from XDA, but I needed to do things differently.
!!! REMEMBER, THIS IS INFORMATION FROM A BIT OF A NOOB. I'M JUST TRYING TO HELP.
!!! ALSO, I TAKE NO RESPONSIBILTY FOR ANYTHING GOOD OR BAD THAT COMES FROM APPLYING WHAT IS SAID IN THIS THREAD.
!!! THIS INFORMATION IS ONLY INTENDED FOR USE ON THE OPTIMUS ONE FROM KOODO MOBILE RUNNING FIRMWARE VERSION 10v.
It is probably not worth asking me any questions, since I barely got through the process properly myself.
-----------------------------------------------------------
Drivers
So, first I installed the LG PC Suite software because I think that gets you the USB drivers needed for this phone. I think LG calls it "Download LG Mobile Support Tool to PC" on their support site at:
http://www.lg.com/sg/support/produc...rgetPage=support-product-profile-mobile-redux
Telus 2.2 firmware version V10G_00
So, since android 2.2.1 is not rootable on Optimus One, I had to downgrade to android 2.2. I found a link to a Telus version of P500h that is android 2.2 at the following link (make sure you download the one that ends in "V10G_00.kdz"):
http://forum.xda-developers.com/showthread.php?p=12253960#post12253960
Installing Telus firmware using KDZ
I followed steps #2 through #8 from the following link:
http://forum.xda-developers.com/showthread.php?t=875881
KDZ worked well, just so you know.
Rooting
Now I used "z4root" to permanently root. It was super easy (way easier than rooting my MT3G Slide). z4root is NOT in the market anymore so you need to sideload it onto your SD storage, then install it with any apk manager.
This site:
http://forum.xda-developers.com/showthread.php?t=901247
led me to this site, where I downloaded z4root from:
http://forum.xda-developers.com/showthread.php?t=833953
After that, I was all rooted up... finally.
So, I obviously am NOT trying to take any credit for the real efforts made by others. I want to say thank you to all people involved with the links and programs I referred to. I really appreciate what people do for others here at XDA. My phones would not be rooted or other kinds of fun without those people.
THANKS!
-------------------------------------------------------------------------
On a bit of a side note, you might want to unlock you phone too... so you could use it with FIDO, etc. So, I used a site called "mobileincanada". It was $20 and took less than 24 hrs to get the code. I was happy with that.
Click to expand...
Click to collapse
EASY WAY is Gingerbreak APK v1.2
;only takes like 2 minutes.
Sent from my LG-P509 (Optimus T) with Void Gear using XDA App
lol just found out, Gingerbreak 1.2 works fine....

[Question] How to flash Original Firmware?

Hi Guys,
i get yesterday my 2X, im very happy for this device, i come from a galaxy s and i feel reborn!!!!!!
This is my question:
someone know how to flash the original firmware??
We know here http://www.optimus2x.net/index.php?topic=393.0 we have all firmware but i cant found the procedure to flah it
I really like modding every my device, is so funny, but before do it, i wanna be safe to make it safely, and if come some problems would like can fix it flashing original firmware..
Someone can post how to flash the original firmware??
Thanks
Ps. I say sorry if i have wrong section, or procedure is just posted , but im not very clever with english language, but i try to do it, i have searched this procedure but i do not have found it..
Sorry for bad English
Again Thanks
Morning, this is not possible yet as Paul over at modaco is yet to release CWM recovery so not ROM flashing is possible. He said it would be released in Beta form.today at sometime so wait and see what that brings to the table.... in the meantime head over to the 2x section at Modaco to keep up with the progress!
Sent from my HTC Hero using XDA App
Hi, thanks for reply
Its a little bit strange it, because for example in other android device, like Galaxy S, you dont need a clockwork recovery to flash the stock original firmware, you need it only for to flash a cooked... you need only to put in download mode and after you can flash a stock firmware without clockwork recovery
Anyway again thanks for reply

[Q] ROM or ROOT - ICS Xperia X8

Hello,
I'm new here and don't know what ROM and ROOT exactly is.
can someone please explain to me what is ROM, ROOT and the difference beteen them?
Is someone can recommand me a ROM and ROOT (if needed) to me Xperia X8 that looks like ICS and tell me how to install it??
THANK YOU VERY MUCH !!!
You should read the FAQ and not open a new thread. It even says "READ ME FIRST!".
XperiaX8D said:
Hello,
I'm new here and don't know what ROM and ROOT exactly is.
can someone please explain to me what is ROM, ROOT and the difference beteen them?
Is someone can recommand me a ROM and ROOT (if needed) to me Xperia X8 that looks like ICS and tell me how to install it??
THANK YOU VERY MUCH !!!
Click to expand...
Click to collapse
Rom is a custom firmware for your phone...
Like the OS is for a pc,custom firmwares are like OS for a phone...
and in order to install a custom rom you need to root a phone and install recovery...
so you must start off with rooting...
I would suggest you to search youtube for detailed video instructions
harshitgroup said:
Rom is a custom firmware for your phone...
Like the OS is for a pc,custom firmwares are like OS for a phone...
and in order to install a custom rom you need to root a phone and install recovery...
so you must start off with rooting...
I would suggest you to search youtube for detailed video instructions
Click to expand...
Click to collapse
Thank you very much now i get it...
Can you please recomand me a good ROM that looks like ICS for my phone?
Here...
http://forum.xda-developers.com/showthread.php?p=20968552
Sent from my X8 using XDA
furylion said:
Here...
http://forum.xda-developers.com/showthread.php?p=20968552
Sent from my X8 using XDA
Click to expand...
Click to collapse
that fully work?
Yes,, but if you have unlocked your bootloader..
send from my w8 running 749 mhz but still locked bootoader

Question on Flashing my Galaxy Mini

im NEWBIE when it comes to flashing,
im planning to flash my phone atleast to a ICS or better rom but....
they said if you flash your galaxy phone there is a chance to brick it... is it also, ALL custom rom out in the net also here in XDA
can do this to my phone?.. how will i know if it is comes from good source?...
i have lot of question bout flashing my mini, like what is the first step i need to do, 2nd? and so on!
can i bring it back to the stock rom if the custom rom i picked have lots of bugs?
what is porting?
BTW MY PHONE IS ROOTED since last night
please enlighten me!!!
comments are much appreciated
you need a lot of reading, please read every sticky of the mini forum
you can take your phone back to stock by flashing firmware through Odin (PC software)
first you will need to be on gingerbread because every rom here is maid for gb
second read about cwm recovery, recovery is what you will need to flash custom rom
follow every procedure correctly and no brick will be in your path
i think im using gingerbread, ill provide SS..
so i need to DL ODIN in my PC(stock purposes?)
if i follow the step by step procedure 100%? no brick will happen?
is there any link for CWM RECOVERY?
google for flashing firmware to mini and you will get Odin
read about flashing cwm, now also Odin will be used and do jot use rom manager your mobile may brick
for 2-3 days do only reading then do what you want to
damn im fxckng scared to flash my phone even though i read tuts bout flashing
nothing to scare for when we are here just clarify all your doubts before doing anything
aallialyssa said:
im NEWBIE when it comes to flashing,
im planning to flash my phone atleast to a ICS or better rom but....
they said if you flash your galaxy phone there is a chance to brick it... is it also, ALL custom rom out in the net also here in XDA
can do this to my phone?.. how will i know if it is comes from good source?...
i have lot of question bout flashing my mini, like what is the first step i need to do, 2nd? and so on!
can i bring it back to the stock rom if the custom rom i picked have lots of bugs?
what is porting?
BTW MY PHONE IS ROOTED since last night
please enlighten me!!!
comments are much appreciated
Click to expand...
Click to collapse
Be4 u start u need alot of patience as wen i did it 4 da 1st time i bricked my phone buit with immense patience i recovered it in 9-10 hrs wasting..
if u want a full guide u can visit yagyagaire.blogspot.com
Sent from my GT-S5570 using xda app-developers app
aallialyssa said:
im NEWBIE when it comes to flashing,
im planning to flash my phone atleast to a ICS or better rom but....
they said if you flash your galaxy phone there is a chance to brick it... is it also, ALL custom rom out in the net also here in XDA
can do this to my phone?.. how will i know if it is comes from good source?...
i have lot of question bout flashing my mini, like what is the first step i need to do, 2nd? and so on!
can i bring it back to the stock rom if the custom rom i picked have lots of bugs?
what is porting?
BTW MY PHONE IS ROOTED since last night
please enlighten me!!!
comments are much appreciated
Click to expand...
Click to collapse
First you will have to flash CWM
Follow the steps in the link given below:
http://yagyagaire.blogspot.in/2011/09/installing-clock-work-mod-recovery-in.html#.UDIx1KniaM9
Then you have to install a custom ROM of your choice(according to your specifications)
I suggest Andro-id 3.2
Follow the link below to flash Andro-id 3.2:
http://roms4mini.blogspot.in/2012/05/andro-id-v-32.html
And that's it!

[Q] Rooting I8190- XXAMA"3"

Hello Everyone,
I want to root my device (I8190XXAMA3), and I can't find any suitable root. It seems everyone just avoids this version, jumping from XXAMA1, 2 to XXAMB3 and to my sorryness XXAMA4. I have no Idea if any of the previous roots would work for me but I find that disturbing ,
Anywho, would some gentleman explain to me if these versions roots would work for me (and i precisely want to know if the I8190XXALK6 version would work, because I have already downloaded it :cyclops: ) or that i shoud install a prevous ROM version.
Another question please : Would the version that I will install have anything to do with the network operators that can be running one my device, or is it irrelevant ?? and would I be able to desimlock the phone when I root it or it still is necesssary to bother my wallet ??
Boy, that's a lot of talking !!
Thanks guys,
Greetings from a android-noob fella, and good luck everygeek.
seem like you have searched it at development section here is link for requested version flash it via odin 3,07 http://forum.xda-developers.com/showthread.php?t=2178346&highlight=xxamb3
THANKS,
I have already rooted with "I8190XXAMB3_I8190XXAMB2_Jelly_Bean_4.1.2_rooted" does that mean that I have "down-graded" the Rom ??
This is a stock rom rooted version if you want custom rom u need a root permission to install cwm by cwm u can install custom rom very ssmooth rom of benz v6 u can install it via cwm hoe to install cwm install rom manager can be installed by rom manager in google play
Sent from my GT-I8190 using xda premium

Categories

Resources