Has anyone tried a Bunker Ring or FlyGrip on the M8? I REALLY want a kickstand, but they're all either ugly, or really thick. The Seidio ones are okay, but the kickstands are housed in a bumpout, and I've had stability issues before with kickstands that are off center. Also, they're expensive. I ordered a generic Bunker Ring from amazon for cheap, (instead of the original from Thehishop.com) to try it out.
Mostly wondered how it would do with the curved back of the M8. I'm thinking it 'might' be alright on a TPU case I'm getting, in that it might just pull the case out flat where its attached...but figured I'd see if anyone has tried...
I'll post my findings on it when it arrives, but it's coming from china...so it'll be awhile...
Lopan12 said:
Has anyone tried a Bunker Ring or FlyGrip on the M8? I REALLY want a kickstand, but they're all either ugly, or really thick. The Seidio ones are okay, but the kickstands are housed in a bumpout, and I've had stability issues before with kickstands that are off center. Also, they're expensive. I ordered a generic Bunker Ring from amazon for cheap, (instead of the original from Thehishop.com) to try it out.
Mostly wondered how it would do with the curved back of the M8. I'm thinking it 'might' be alright on a TPU case I'm getting, in that it might just pull the case out flat where its attached...but figured I'd see if anyone has tried...
I'll post my findings on it when it arrives, but it's coming from china...so it'll be awhile...
Click to expand...
Click to collapse
I use a crabble with all of my phones.
http://www.seskimo.com/crabble.php
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chobie said:
I use a crabble with all of my phones.
http://www.seskimo.com/crabble.php
Click to expand...
Click to collapse
Where do you keep it when not in use? inside the case? or just floating around?
Lopan12 said:
Where do you keep it when not in use? inside the case? or just floating around?
Click to expand...
Click to collapse
It's thin, light and foldable. You can actually store it in your wallet.
Sent from my HTC_0P6B using Tapatalk
I don't always have my wallet...
Sent from my HTC6525LVW using Tapatalk
Lopan12 said:
I don't always have my wallet...
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
It's thin as a card. I dont see portability being a problem o_o
Lopan12 said:
Has anyone tried a Bunker Ring or FlyGrip on the M8? I REALLY want a kickstand, but they're all either ugly, or really thick. The Seidio ones are okay, but the kickstands are housed in a bumpout, and I've had stability issues before with kickstands that are off center. Also, they're expensive. I ordered a generic Bunker Ring from amazon for cheap, (instead of the original from Thehishop.com) to try it out.
Mostly wondered how it would do with the curved back of the M8. I'm thinking it 'might' be alright on a TPU case I'm getting, in that it might just pull the case out flat where its attached...but figured I'd see if anyone has tried...
I'll post my findings on it when it arrives, but it's coming from china...so it'll be awhile...
Click to expand...
Click to collapse
If you think about returning to a case with a kickstand checkout the "HTC M8 One 2 Puregear Kickstand Case Holster Combo" can be bought on Amazon for $16.99. It has a raised edge around the screen which protects it if you lay it screen down and the kickstand is stable. IR blaster works to. Comes with a belt holster or easy to carry in your pocket.
http://www.amazon.com/Puregear-Kick...0059&sr=1-1&keywords=htc+one+m8+puregear+case
Related
Got the OtterBox Commuter in Gray and black and thought I would share some photos.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks nice! Did you buy it at at&t store? Does it add much bulk?
Sent from my SGH-i917 using Board Express
where u get it?
asez said:
where u get it?
Click to expand...
Click to collapse
I pick it up from a corporate at&t store.
Sent from my HTC PH39100 using xda premium
I returned my.otterbox...apparently I was sounding muffled on the call and o tested it and it was true...no go for me...unfortunate because its a nice case
Sent from my HTC PH39100 using Tapatalk
mrakifa said:
I returned my.otterbox...apparently I was sounding muffled on the call and o tested it and it was true...no go for me...unfortunate because its a nice case
Sent from my HTC PH39100 using Tapatalk
Click to expand...
Click to collapse
I have the same problem
Tomorrow I am going to return it
If the sound is muffled due to the silicone case, couldn't you just puncture a hole into it as the microphone is at the bottom of the case?
I ordered a commuter case and I'm hoping that it doesn't run into the same issues.
mohcho said:
If the sound is muffled due to the silicone case, couldn't you just puncture a hole into it as the microphone is at the bottom of the case?
I ordered a commuter case and I'm hoping that it doesn't run into the same issues.
Click to expand...
Click to collapse
I also ordered the commuter case.Black on Black.
Yes it can be modified to open up the mic with ease.
I just received my commuter case and it's great. I have an opening for the microphone at the bottom.
I kind of messed up the screen protector install on mine. I checked on the otterbox site but can't find anywhere where I can order an additional screen protector from them? Anyone have a suggestion?
I like the otterbox one because it feels like the actual screen and not a rubbery layer. I used the ZAGG invisible shield on an ipod before and it wouldn't work well on a touch screen as it's tacky and you can press into it.
The plastic is weak I cracked mined
Sent from my HTC PH39100 using XDA App
Is the call quality reduced too bad or is it bearable? I would rather take a little call quality away for protection!
There are no issues with call quality as long as the case is installed properly and the opening in the silicone is over the microphone hole.
I have been using this case for a week and like it. It provides good protection. I can rest assure that my phone will be protected if it ever dropped. The only complain I have is that the silicone part is a dust magnet. The day I put it on, it's never been dust-free. I would wish it is replaced by TPU instead.
dtien said:
I have been using this case for a week and like it. It provides good protection. I can rest assure that my phone will be protected if it ever dropped. The only complain I have is that the silicone part is a dust magnet. The day I put it on, it's never been dust-free. I would wish it is replaced by TPU instead.
Click to expand...
Click to collapse
I went with the grey Incipio Silicrylic case. Just got it in and it is a nice fit, has a really nice feel, and looks great.
http://www.ebay.com/itm/Incipio-HTC...057?pt=LH_DefaultDomain_0&hash=item1e69c482a1
I was going to get the mercury case, but from pictures it was way too thick for my liking so I decided to get this case. The case is titled to be silicone, but it doesn't look like silicone from the pictures so I emailed them and they said it was silicone material so I went for it. I received the case and it turns out it was a TPU case. This case feels REALLY thin for a TPU case so it doesn't add much bulk to the phone. This case is tailored to fit the i9023 so ALL cutouts are perfect and fit is perfect as well. Overall, if your looking for a good TPU case which doesn't add much bulk to it I would recommend this. I don't have a mercury TPU case to compare it to, but I'm really happy with how this turned out. The only con that I would have for this case is that the volume rocker buttons were a bit tight so it would be easily be pressed, but if you stretch the case a little it will fix that issue.
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got this case from Here. It took exactly 2 weeks to arrive and customer service is spot on.
Nice. Would have gotten it if there wasn't a hard nilkin case.
Sent from my Nexus S using Tapatalk
shockem said:
Nice. Would have gotten it if there wasn't a hard nilkin case.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Yeah. I wanted to get that, but just too little protection for my taste.
Sent from my Nexus S using XDA App
Looks nice, ordered my self one ^^
Looks good.
Do you have a screen protector on? Yours is in black I presume?
Zouk18 said:
Looks good.
Do you have a screen protector on? Yours is in black I presume?
Click to expand...
Click to collapse
Yep, BestSkinsEver. And yeah its black.
Sent from my Nexus S using XDA App
I got a tpu case like this on amazon for 2 bucks. And its got a nice diamond design.
Feeshie said:
I was going to get the mercury case, but from pictures it was way too thick for my liking so I decided to get this case. The case is titled to be silicone, but it doesn't look like silicone from the pictures so I emailed them and they said it was silicone material so I went for it. I received the case and it turns out it was a TPU case. This case feels REALLY thin for a TPU case so it doesn't add much bulk to the phone. This case is tailored to fit the i9023 so ALL cutouts are perfect and fit is perfect as well. Overall, if your looking for a good TPU case which doesn't add much bulk to it I would recommend this. I don't have a mercury TPU case to compare it to, but I'm really happy with how this turned out. The only con that I would have for this case is that the volume rocker buttons were a bit tight so it would be easily be pressed, but if you stretch the case a little it will fix that issue.
Pictures:
I got this case from Here. It took exactly 2 weeks to arrive and customer service is spot on.
Click to expand...
Click to collapse
Nice. but I can't buy. ((
I ordered this case off ebay as well and it was shipped from California. I believe it was $10 with free shipping.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case comes with these extended bumper corners which make holding the phone easier and provides extra protection from the Left Corner Drop of Doom. The weakest point of the case is the kickstand. The kickstand is flimsy and does not have a positive lock in place or a strong hinge when opened. the volume keys as well as the power key are covered. The charging port as well as the earphone jack are left exposed. The black rubber is harder than the standard TPU but not as hard as the white plastic that it is attached to.
All in all its a nice case
Sent from my SPH-L900 using xda premium
Nice case..found it too, with so many color variations..but they wont ship here..huhu..thanx for the review..
not a big fan at all, looks horrible!
Makes it look like the size of the Ziggy device on Quantum Leap show.
Well......
Im not sure how it makes the phone look bigger because the case isnt pictured with the phone in it.
Anyways I was in Sprint looking to see if they had gotten in either of my two favorites which are otterbox or ballistic and they hadnt. There was an older than me gentle man who was looking for a case for his phone and they had none and he said he was affraid he was going to break it. I explained that I understood seeing how my first one lasted 20hrs. I reached in my back pocket and gave him the case. He wanted to pay me for it but I told him it wasnt necessary and wished him a happy holiday season. He seemed a bit confused as well as the Sprint employees wonder why I was asking about a case when I am just pulling them out of my pocket giving them away like toys from Santa's bag. I think giving away an $8 freely shipped case to someone who will appreciate the act and may recipicate an act of kindnes to someone else this season is worth the small investment.
I have this exact case as well. It makes the phone too big for breast pockets, but still fine for pants pockets and carrying. I plan on only using it for when I need protection, but not as a daily driver. For the price, you can't beat it.
Ordered the same case. Do you have pics of the phone in it?
I have this case i think it feel really good in the Hand and looks good too. CLICK on the Link to see the Pictures
http://www.ebay.com/itm/Black-White...916516?pt=PDA_Accessories&hash=item5d362d9924
Reminds me of the Ballistic cases
slicingtaco said:
Reminds me of the Ballistic cases
Click to expand...
Click to collapse
Agreed, but the TPU is a lot more stiff. Not certain but I would venture to guess these cases wouldn't do as well in drop tests.
mdt73 said:
Agreed, but the TPU is a lot more stiff. Not certain but I would venture to guess these cases wouldn't do as well in drop tests.
Click to expand...
Click to collapse
I am sure as well.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Just got mine in the mail today. I like it, first tpu case ive ever used though so I cant compare it.
Tech21 doesn't seem to get a lot of attention in this group. I'm just wondering what everyone thinks. I have an Evo Check for my phone and it is a great case. Fits well and seems like it would protect the phone. Still, I also want a folio type case, to protect the screen. Tech21 has this case: https://www.tech21.com/en_us/evo-wallet-galaxy-note8-black
Does anyone have any experience with it that would tell me whether it would be a good or bad purchase?
Their cases are too slippery and they make so few cases for the Note 8 I over look them. Quality is crap for how much they cost
Sent from my SM-N950U using Tapatalk
Yes, they are quite expensive.
usmaak said:
Tech21 doesn't seem to get a lot of attention in this group. I'm just wondering what everyone thinks. I have an Evo Check for my phone and it is a great case. Fits well and seems like it would protect the phone. Still, I also want a folio type case, to protect the screen. Tech21 has this case: https://www.tech21.com/en_us/evo-wallet-galaxy-note8-black
Does anyone have any experience with it that would tell me whether it would be a good or bad purchase?
Click to expand...
Click to collapse
I hope this information helps. I also wanted a folio type case to protect the cover as all the screen protectors seem to be pretty lacking. I went with my wife to the T-Mobile store where she wanted to get an S8 Plus and this case that you picked out was close to what she got. Was given a drop test by the cashier using his own phone. The packaging was pretty plain and I wasn't that impressed but wanted to get in and out and we got it. After checking it out after she had it a few weeks I went ahead and ordered the one that you pasted a link for above. Honestly I recommend it. Pretty sturdy and thin but protects the phone quite nicely. has a clip clasp and obviously covers the front. Not bulky but not skimpy either... My fourth case for the note lol and this one is a keeper.. Go for it.
Sent from my SM-N950U1 using Tapatalk
I use the Tech21 EVO as it fits with the Dome Glass protector I have. This is my first Tech21 case but the version I got is not slippery at all due to the back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looked into that. Its a nice case, but that clasp needs to be magnetic or something, I found the plastic push-in clasp to be cumbersome to open and close quickly.
jaredtritsch said:
Looked into that. Its a nice case, but that clasp needs to be magnetic or something, I found the plastic push-in clasp to be cumbersome to open and close quickly.
Click to expand...
Click to collapse
I understand that but sometimes magnetics can mess with the S pen
Sent from my SM-N950U1 using Tapatalk
My s5 it has a tech 21 case has 3 years old and it fel so many times. It is an impressive piece of engenering, just the sound it makes when it its the floor...it sounds muted like it is made from ruber.
Off course i would get a tech 21 for my note 8, choose the evo wallet because ...such a big screen ...
It is very expensive.
they are not slepery unless one has spider hands!
I wish they made a case that completly isolates the phone, and another one so that i can put the phone on my bikes like rokform does.
I am very happy with my evo!
Sent from my SM-N950F using XDA Free mobile app
Was wondering if the above mentioned case has a slight sticky tacky feel to it which I like.?
I remember the Tech21 Mesh series ones on older Samsung devices had a wonderful slight tacky sticky feel to thier edges of the cases. Thanks.
Sent from my SM-N950U using Tapatalk
It does slightly but if you have greasy fingers stay away
Sent from my Pixel 2 XL using Tapatalk
browniegirl said:
It does slightly but if you have greasy fingers stay away
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Cheers. Was looking for something with a slightly sticky tackey edges.
I think it was the Mesh series Tech21 I had for the S7 , edges were orange colored and had a slight sticky tacky feel to it.
Sent from my SM-N950U using Tapatalk
I've been using this case since day one. I tried a few others, but keep coming back to it. It's a great case. I'm not sure about tacky, but it is not slick. I've never even come close to dropping my phone.
Just one word of warning. My wife got the white Evo Check, and the white yellowed pretty quickly. We just threw it away and got a cheap case on Amazon for her. My black case is still in perfect shape.
usmaak said:
I've been using this case since day one. I tried a few others, but keep coming back to it. It's a great case. I'm not sure about tacky, but it is not slick. I've never even come close to dropping my phone.
Just one word of warning. My wife got the white Evo Check, and the white yellowed pretty quickly. We just threw it away and got a cheap case on Amazon for her. My black case is still in perfect shape.
Click to expand...
Click to collapse
I primarily use a leather type folding case on the N8, but have tried a few regular cases which I find in all honesty uncomfortable to hold for long.
I find the edge tpu plastic or whatever it is hard to the touch. Was hoping to find a case that has soft compressible sides. The skins are soft and pliable but the edges are too thin for protection.
Sent from my SM-N950U using Tapatalk
Note8 Tech21 evo check users, can help see if your case inside edge facing screen near top of power button is there a small extra protruding bit? Wondering if mine is defective. Thanks. Mine is black case, also tell me if yours is black or white.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I find the plastic injection faulty in these cases, UAG cases are by far, better built
winol said:
I find the plastic injection faulty in these cases, UAG cases are by far, better built
Click to expand...
Click to collapse
I found the s pen and USB port protection is little or inadequate. It's exposed.