Related
Hi,
using x8 ( 11W07 ),
what i did in the process of installing Jelly Bean;
- Unlock bootloader, success
- Flashtool; success
- Wipe data, etc, dalkiv
- Install ROM & Gapps...
- Reboot system
Everything goes smoothly except currently stuck on the 'android' logo loading screen.
What's the actualy problem. Is this considered soft brick?
Appreciate for the help guys!
slogd3ad said:
Hi,
using x8 ( 11W07 ),
what i did in the process of installing Jelly Bean;
- Unlock bootloader, success
- Flashtool; success
- Wipe data, etc, dalkiv
- Install ROM & Gapps...
- Reboot system
Everything goes smoothly except currently stuck on the 'android' logo loading screen.
What's the actualy problem. Is this considered soft brick?
Appreciate for the help guys!
Click to expand...
Click to collapse
Did you flash the right kernel ?
Vınce said:
Did you flash the right kernel ?
Click to expand...
Click to collapse
All files got it from this official thread;
http://forum.xda-developers.com/showthread.php?t=1789713
Yeah, this is a soft brick.
Use Flashtool to unbrick your phone.
Maybe u flashed wrong kernel. Try again.
Have you formatted /system, /data and /cache in recovery before installation?
If not, go to recovery -> mounts and storage, format /system, /data and /cache and then install the ROM and GApps.
fifo171 said:
Have you formatted /system, /data and /cache in recovery before installation?
If not, go to recovery -> mounts and storage, format /system, /data and /cache and then install the ROM and GApps.
Click to expand...
Click to collapse
I have the same problem but the back botton is not work to get the recovery the can do is to power on the dev. and get stuck on sony ericson logo i try the flashtool but it not work because i need to get into recovery also the adb not work not device found...... HELPPPP :crying:
saley7 said:
I have the same problem but the back botton is not work to get the recovery the can do is to power on the dev. and get stuck on sony ericson logo i try the flashtool but it not work because i need to get into recovery also the adb not work not device found...... HELPPPP :crying:
Click to expand...
Click to collapse
You don't need to be go to recovery to use flashtool.
Install PCC.
Download and install flashtool and install drivers in the drivers folder.
Download stock rom, place it in firmwares folder.
Run flashtool and follow the instructions there.
Sent from my rooted tomato using xda app
Use a seus or pccompanion
Wysłane z mojej X8 przy pomocy NAODroid v0.1.2
Try to revert to stock rom and kernel
Refer to this thread
i always have this problem (stauck on kernel logo) when i flash the rom: i just remove the battery for 10s and then reboot . :good::good:
The OP's problem is that you can't go directly from stock kernel to JB.
First you must flash another custom kernel.. Try alfsV08a CM7 or GDX.
Using it you may format your phone correctly.
Then only may you install the JB kernel then rom.
[PROBLEM SOLVED] I flashed the custom ROM directly and everything is up and running! Details are below Thanks everyone!
==========================================================================================================================
Experts please help!
I have been surfing my whole day trying to root my Note I (N7000) and flash a custom ROM.
My kernal is XXLSF and I flashed PhilZ-cwm6-ZCLSF-CHN-5.08.5-signed.zip.
I rebooted it after flashing. The Samsung logo appears but then, it blackens and nothing appear on screen.
Now, I can get into the recovery mode by pressing the volume up, power and home button.
I am planning on flashing a stock ROM from SamMobile. Is it okay? WIll I brick my device? What should I do?
I am so frustrated right now:crying:
Your help is much appreciated. Thank you!
"http://forum.xda-developers.com/showthread.php?t=1746794"
From this post, "None since I switched to the CWM4 and CWM6 recoveries (no more superbrick risks under 4.0.4 ICS kernels, only CWM5.x was affected)"
Should I flash a stock ROM that is under 4.0.4, but not the lastest 4.1.2?
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
nokiamodeln91 said:
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
Click to expand...
Click to collapse
Thank you so much for such prompt reply!!
Really? I can flash a custom ROM without root access?
THANK YOU!!!
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
nokiamodeln91 said:
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
Click to expand...
Click to collapse
Yes! I do have CWM recovery
Should I flash stock ROM and then flash the custom rom([ROM][JB 4.3][AOSPA][AOKP-MR1][CM10.2]P.A.C True All in 1 ROM[Nightlies])?
because I have never updated my Note I, the kernal version is very old.
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
nokiamodeln91 said:
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
Click to expand...
Click to collapse
Thank you for keeping an eye on this post!
I encounter a problem during flashing the custom rom :crying:
Besides, I can't find the option "Format system" while following the steps to flash the custom ROM
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
nokiamodeln91 said:
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
Click to expand...
Click to collapse
AMAZING!!!!
I have finally and successfully boot into my device after nine hours battle with my note I :silly:
But the last eight hours was nothing when comparing with your BIG HELP!
What's weird is that all my photos and data are present
I am 100% sure that I wiped all the data and cache and format data cache
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
nokiamodeln91 said:
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
Click to expand...
Click to collapse
"UI system is forced to stop" appear continuously after changing language from English to Chinese.
Is it true that changing system language will lead to breakdown of system?
THANKS A MILLION!!
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Understood!
Thank you very much for helping me all along! :fingers-crossed:
Please accept my genuinely gratitude for helping a stranger like me!:highfive:
I LOVE YOU!
:thumbup::thumbup::thumbup:
Sent from my GT-I9500 using xda premium
I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
NightZeus said:
I have xperia z1 C6903 and i want to root it and install new rom
i am downloading now this one
HONAMI_430_290_MONX
030002P_REL
676.16MB
and i need help with steps
what shall i do exactly please someone help me with every single step to root my device and install that rom
Click to expand...
Click to collapse
Use this guide first to get root and recovery on .290
Then go to recovery and flash the mondified zip. After flash clear cache and dalvik and reboot. DONE
DO NOT CREATE NEW THREADS FOR SOMETHING THAT HAS BEEN ASKED 100s OF TIMES !!!
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
NightZeus said:
this man too fast i dont understand many things i just download now the flashtool ok then i download this file C6903_14.2.A.0.290_Stripped.ftf ok lets forget about installing new rom i just wanna root my xperia z do i download this 2 files what i have to do else ? for just rooting my device ?
Click to expand...
Click to collapse
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
anybody can help me to fix it on team viewer anybody can do that i wanna root my mobile and now its not working anymore guys
NightZeus said:
i think i did something wrong my xperia z1 not working anymore i try to open it it shown sony and black screen and not start up anymore what can i do
Click to expand...
Click to collapse
This is called a bootloop. All you need to do is press VOL UP + POWER, then connect your phone to your computer in flashmode (connect USB while holding VOL DOWN button) and flash .534 using Flashtool
Yep, just Hold Volume Down, connect to PC and flash a Stock FTF.
shem2409 said:
If you can't follow the video, read the thread:
http://forum.xda-developers.com/showthread.php?t=2572988
Click to expand...
Click to collapse
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
paullu said:
sir I follow the link and successful rooted and install recovery everything.now I want flash this HONAMI_430_290_MONX. Do I still need to flash kernel and recovery again or just make a wipe and flash?
Click to expand...
Click to collapse
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
shem2409 said:
No just go into recovery, flash the monxdified rom zip and then clear cache and dalvik. I have done the same thing and it works perfectly fine. You can flash any 4.3 rom in this way, as you are on the same firmware.
Click to expand...
Click to collapse
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
paullu said:
sorry for stupid question I just want make sure
So I just need to flash rom.no need ti flash kernel
Also do I need to make a factory reset before flash?and you said after flashed rom need to clean cache and dalvik?
Click to expand...
Click to collapse
Monxdified, iHackers and all stock based roms don't need a custom kernel (that's why you don't need to be bootloader unlocked to use them)
Just go into your recovery flash the zip. After the zip is flashed you will get an option to clear dalvik and cache.
It is always recommended to do a factory reset before flashing a custom rom, as it might misbehave. You can however try it without factory reset and then if you see that it doesn't work properly just do a factory reset and flash the rom zip again.
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
mythomasy said:
HELP!!
new bought c5503, upgraded to the latest 10.4.1.B.0.101.
I unlocked the bootloader first, then use 'fastboot' flash the CWM recovery(v6.0.3.6), after that, my phone can't start up, only show the "free xperia" logo, and the xperia logo, then the screen mess, repeat and repeat.
I can go into the cwm recovery with the "UP" volume key.
is there anyone can help me with this situation? many thanks!!!
Click to expand...
Click to collapse
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
use flashtool and flash a fresh .tft
jing000l said:
use flashtool and flash a fresh .tft
Click to expand...
Click to collapse
thank you very much~~
it did work!
vuckiez said:
well.. if you can enter the recovery mode, you can clean flash again the rom, make sure you wipe factory data, partition chace and dalvik chace, and then flash it, and then flash gapps.. i've been there in that situation manytimes, even worse..! try as many as rom suits you.. for now im using unoficial carbon rom for xperia zr.. hope it would help
Click to expand...
Click to collapse
Thank you very much, it does help!!
danyznd123 said:
I guess that you have flashed a custom kernel and tried to make a normal boot ...Xperia ZR won't boot normaly when you flash a custom kernel!!Just enter to recovery mode,flash root files,and then flash the stock kernel and the device will boot normaly
Click to expand...
Click to collapse
Thanks a lot, i tried to flash the stock kernel and it did work !:victory:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
Which CWM version did you install?
mahithm said:
Which CWM version did you install?
Click to expand...
Click to collapse
5.0.26 for cooper
s.tanbin said:
5.0.26 for cooper
Click to expand...
Click to collapse
Can you tell me exactly what happens when you flash a custom rom from CWM?
s.tanbin said:
Hi everyone.
My galaxy Ace gts5830 can't cmw can't mounts data; i recently flash it via odin..
when i flash it; it's say it can't apply csc on recovery mod...
now i can't install any custom rom or backups cmw.. i flash it several time id didn't work...
my phone Europe so use fw "xeu" "xwkpa"
Click to expand...
Click to collapse
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
mahithm said:
Can you tell me exactly what happens when you flash a custom rom from CWM?
Click to expand...
Click to collapse
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Viper The Ripper said:
You need root permissions to mount /data partition...
1. Reboot into <Stock recovery 3e>
2. Root your device
3. Flash CWM 5.0.2.6 Fixed
4. Done!
Click to expand...
Click to collapse
phone is 100% rooted
and i installs that cmw as well but cmw won't mount data.
but this problem fix after flash in cm 9
s.tanbin said:
i try to remove same use less app and tw home.. which i did lot of time before..
but suddenly it started bootloop.
then i try to cmw back the rom cmw say miss match.
then i flast stock rom via odin
at fast it didn't take properly phone auto started before the operation finish; and started to bootloop.. i flash it again then same problem ..
then i clear data then phone on but cmw can't mound data i try flash cm10 it blink.
finally after several flash and try cm9 it took cm9 and work perfect but if i go stock rom it still having data mound problem
frameworks xwkpa
Click to expand...
Click to collapse
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Viper The Ripper said:
Always after flashing a STOCK rom via Odin boot into recovery and do wipw data factory reset and wipe cache partition too in order to avoid the bootloop
Don't remove the launcher you need at least one to use your phone
Your data mount problem could be solved if you flash an Android 2.3.6 Firmware
(Try with ddq8 or ktm)
Click to expand...
Click to collapse
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
It will be ok
mahithm said:
It will be ok
Click to expand...
Click to collapse
ok i will give a try...
s.tanbin said:
thanks for the tip..
r u sure is it ok if i flash 2.3.6 firmware coz Samsung didn't officialy give any update for my original firmware...
don't mind just scare... so asking..
Click to expand...
Click to collapse
Yeah, it should work. If you have the correct model (GT-S5830) you could use all the Firwares available for it
---------- Post added at 01:22 PM ---------- Previous post was at 01:16 PM ----------
s.tanbin said:
ok i will give a try...
Click to expand...
Click to collapse
Ok! anyway you can go back to your current firmware when you want
BTW some customs roms are based in european or indian firmwares