I have a HTC M7 with ViperOne 6.2.0.
I tried to flash ElemetalX with TWRP(sure that I have correct versions) , but after reboot I get the systemUI error constantly with a lot of black screens.
I unbricked my phone once already with the ROM reflash method, but my phone is playing with me again. I can't even install a zip file.
Who can help me with these two problems before I flash another ROM again?
Related
Well, I really have a serious problem. My golfu is unlocked, and I was using a custom rom. I tried to install SpeedDroid on my phone, but after I installed it, by phone stopped booting, it's stuck on HTC logo screen.. I think the problem is that when I installed the rom, i didn't really followed the instructions, after flashing to ROM & GAPPS, I fastboot flash boot the boot.img inside the room, but in the instruction thread says nothing about fastboot flashing..
I wiped data/cache again, and tried installing another rom, and still got the problem with booting..
Someone, help?
I have a restore.. but it's from a different rom (can't remember exactly what rom, i think cyanogen mod 10), but anyway, it says md5 file mismatch..
-------------
Problem solved, just flash cm 10, and got it working. Delete this
Thanks !!
I've been trying to flash a custom rom to my verizon HTC one, and have been getting stuck in a boot loop on every attempt.
ROMs I've tried:
CyanogenMod (m7 nightly 3/19)
ViperOne (5.8.0 and 5.7.0)
Currently running (and stable):
S-Off and Booloader Unlocked
stock radio
stock firmware
stock ROM (w/ root)
TWRP 2.7.0.0
CyanogenMod would boot, but then randomly reboot shortly afterward and was unable to recognize my SIM. Viper goes into a true boot loop, rebooting at the HTC splash screen (w/ red warning text). I have tried flashing each several times, wiping before each installation. Luckily, I have a backup of the current stable ROM, so I'll always be able to get out of a loop. I'm not new to unlocking and flashing ROMs but I've been using an HTC Thunderbolt until now (not losing my unlimited data, finally gave in and bought a used phone). I never had a problem on my old phone, but I feel like I might be missing something.
Any suggestions on what I might be doing wrong?
EDIT: Tried Android Revolution HD 53.0, same result as Viper
The_Wing_Man27 said:
I've been trying to flash a custom rom to my verizon HTC one, and have been getting stuck in a boot loop on every attempt.
ROMs I've tried:
CyanogenMod (m7 nightly 3/19)
ViperOne (5.8.0 and 5.7.0)
Currently running (and stable):
S-Off and Booloader Unlocked
stock radio
stock firmware
stock ROM (w/ root)
TWRP 2.7.0.0
CyanogenMod would boot, but then randomly reboot shortly afterward and was unable to recognize my SIM. Viper goes into a true boot loop, rebooting at the HTC splash screen (w/ red warning text). I have tried flashing each several times, wiping before each installation. Luckily, I have a backup of the current stable ROM, so I'll always be able to get out of a loop. I'm not new to unlocking and flashing ROMs but I've been using an HTC Thunderbolt until now (not losing my unlimited data, finally gave in and bought a used phone). I never had a problem on my old phone, but I feel like I might be missing something.
Any suggestions on what I might be doing wrong?
EDIT: Tried Android Revolution HD 53.0, same result as Viper
Click to expand...
Click to collapse
You need to flash a verizon compatible rom.
alray said:
You need to flash a verizon compatible rom.
Click to expand...
Click to collapse
I came across this in some of the research I was doing, and I realize that was a problem for Revolution, but Viper is listed as compatible. I would have originally asked on their thread, but I'm not allowed to post in that section yet and I wasn't able to find a similar post because the search isn't functioning right now.
The CM page said that build was compatible for multiple carriers, but I did try the m7vzw build and got an error during the installation that said I was using an m7 device.
EDIT: Problem solved, switched from TWRP to PhilZ CWM recovery, Viper booted successfully.
Hi,
I got my brother's old HTC One M7 and tried to flash the ROM.
I have experience with Samsung Devices so I figured it worked the same way.
I install cyanogenmod using their installer. It worked, but dreadfully slow (slower than the stock rom).
So I downloaded Android Revolution 53.0, put in the /Downloads folder and went into recover and tried to install from zip.
It appeared as if the installation went through, and now the phone is stuck on the HTC quietly brilliant screen.
I can go into HBOOT, FASTBOOT, RECOVERY.. But I can't seem to get past it.
Just went into recovery and see "No OS installed! Are you sure you wish to reboot?"
Please help!
Thanks.
First question....what version recovery are you using
Sent from my HTC One using XDA Premium 4 mobile app
To revive this thread.
So, I was able to figure out the original problem or at least get around it.
For whatever reason Android Revolution HD wouldn't install despite trying to flash the ROM using TWRP or CWM recovery.
I was able to get CyanogenMod and LiquidSmooth to work without issues.
I later used a Nandroid backup of a Bell Mobility (CID BM____001) and return it to "stock" JB.
I'm trying to get KIT KAT on it, I get the OTA update notification, but after it initiates the installation, device reboots into my custom recovery.
So, I tried to flash the stock BM recovery, and BM Stock KitKat install starts, but then I get a teal and pink screen back to back and get stuck on the HTC / Beats screen.
Any help is appreciated.
OK, your first problem sounds like you didnt flash the Boot.img first through fastboot, before trying to install the ARHD Rom, extract it from the zip file you downloaded and flash it through fastboot, then flash the rom, I believe Sense Roms (ARHD) will not work on non sense rom boots like CyanogenMod.
Post 3 problem is you need to install the stock recovery first.
Thanks for the quick response.
I've gotten further than where I was about an hour ago.
I realized when I flashed the stock recovery for BM_001, it was an older version (mismatched my ROM).
I flashed the the stock recovery version of my stock ROM, and I was able to get KIT KAT.
Now, it's doing a 2nd OTA update to get SENSE 6.
Will post update as soon as it's done. Hopefully it's successful.
Hello All,
Hope you are doing well,
I am facing problem with my HTC One , Sprint m7 -wls . I am using this for GSM network for an year, It is not booting up now.
When I start the phone , HTC logo appears and the phone keeps restarting again and again in a loop.
Additional information :
It is happening since I made a flash of ElementalX - 18 - kernel
Phone is S-ON
Rooted
Adb is working
TWRP 2.6 Recovery,
I am able to boot into Recovery
Tried to wipe everything and clean installed stock rom , viperone .. Not resolved
Flashed stock kernel again. But this also didn't resolve..
Please help.......
Andyfan99 said:
Hello All,
Hope you are doing well,
I am facing problem with my HTC One , Sprint m7 -wls . I am using this for GSM network for an year, It is not booting up now.
When I start the phone , HTC logo appears and the phone keeps restarting again and again in a loop.
Additional information :
It is happening since I made a flash of ElementalX - 18 - kernel
Phone is S-ON
Rooted
Adb is working
TWRP 2.6 Recovery,
I am able to boot into Recovery
Tried to wipe everything and clean installed stock rom , viperone .. Not resolved
Flashed stock kernel again. But this also didn't resolve..
Please help.......
Click to expand...
Click to collapse
run a ruu that will fix it
Thanks .. Let me try...
Hi,
Looking for some help from you guys if possible. I have have been flashing Android HD Roms by Mike1986 for some time now on my HTC One (M7). Last updated to HD-One_91.1 to upgrade to Lollipop. Experienced very poor battery performance so looked to flash back to an earlier Kitkat version. Instead of flashing a previous one, I thought i'd give the Google 6.1_GE a go and see what that was like.
Big problems. Phone kept getting stuck in boot loop - so eventually i decided to wipe the phone and start again. Now when I switch phone on It boots into the start screen for Goggle edition then reboots constantly.
As I wiped the patition, I do not have the option to reinstall even the Lolipop ROM.
My phone wont stay on long enough to copy another ROm over. so Im stuck with a pjone that keeps switiching off before I can do anything with it.
I use TWRP recovery but when i try Factory reset etc, same problem occurs.
How can I get another compatible ROM onto the phone or am I stuck with a knackered phone?
Any advice greatly appreciated.
Thanks in anticipation.
DrG.
DrGunlove said:
Hi,
Looking for some help from you guys if possible. I have have been flashing Android HD Roms by Mike1986 for some time now on my HTC One (M7). Last updated to HD-One_91.1 to upgrade to Lollipop. Experienced very poor battery performance so looked to flash back to an earlier Kitkat version. Instead of flashing a previous one, I thought i'd give the Google 6.1_GE a go and see what that was like.
Big problems. Phone kept getting stuck in boot loop - so eventually i decided to wipe the phone and start again. Now when I switch phone on It boots into the start screen for Goggle edition then reboots constantly.
As I wiped the patition, I do not have the option to reinstall even the Lolipop ROM.
My phone wont stay on long enough to copy another ROm over. so Im stuck with a pjone that keeps switiching off before I can do anything with it.
I use TWRP recovery but when i try Factory reset etc, same problem occurs.
How can I get another compatible ROM onto the phone or am I stuck with a knackered phone?
Any advice greatly appreciated.
Thanks in anticipation.
DrG.
Click to expand...
Click to collapse
Your phone must be s-off to use this rom like said in the OP. Also said that your phone WILL bootloop if you flash it without having s-off.
Android Revolution HD 6.1
Google Edition
You need S-OFF, otherwise you'll experience boot-loop!
You can't use ART with deodexed custom ROM
You need TRWP 2.6.3.3 custom recovery!
--- MD5 Checksum: 2A9CD96A42C79D64A7933ECE76AD84E6 ---
Click to expand...
Click to collapse
Boot in recovery (twrp), push a rom to your phone using adb push, adb sideload or MTP (MTP only available on newer twrp versions) and then flash the rom.
alray said:
Your phone must be s-off to use this rom like said in the OP. Also said that your phone WILL bootloop if you flash it without having s-off.
Boot in recovery (twrp), push a rom to your phone using adb push, adb sideload or MTP (MTP only available on newer twrp versions) and then flash the rom.
Click to expand...
Click to collapse
Ahhhh!!!! RTFp eh? Well thanks for that. I'll try again and hopefully Will be ok.
Thanks for taking the time to reply.
Cheers
DrG