Can't get past bootloop when flashing a rom - T-Mobile Samsung Galaxy Note

Just like it says. I can't get past the boot loop when I flash a custom rom, only when I flash the stock rom. I'm on T-Mobile note 3 with kitkat. I have searched everywhere and tried any solution I have found. Please help me. Thanks
Sent from my SM-N900T using XDA Free mobile app

jdbbcd said:
Just like it says. I can't get past the boot loop when I flash a custom rom, only when I flash the stock rom. I'm on T-Mobile note 3 with kitkat. I have searched everywhere and tried any solution I have found. Please help me. Thanks
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
This area is for the T-Mobile original note, not the note 3.

jdbbcd said:
Just like it says. I can't get past the boot loop when I flash a custom rom, only when I flash the stock rom. I'm on T-Mobile note 3 with kitkat. I have searched everywhere and tried any solution I have found. Please help me. Thanks
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
What kernel are you using and what rom are you flashing

Related

[Q] Is my Tab dead?

I've been running CM 10.1 on my 7310 for a couple of months - it's slow, but it does the job.
Today it started misbehaving more than usual, so I rebooted. It's spent the afternoon rebooting itself about once every five minutes - freeze and hard reboot (Samsung splash screen). I tried different versions of CM and AOKP to figure out if it was hardware or software, no change.
I wiped it and flashed CM 9 nightlies a couple of hours ago, and got the same behaviour. After some googling I found aLogrec and turned it on. As soon as it boots and tries to start recording the logcat, it hard reboots. I figure the onboard flash storage is borked - is there anything I can do? I can't even get it to boot into Recovery, it just loops forever.
I'm hoping someone out there can give me some ideas before I go out and spend on a Nexus 7..
Have you tried to see what happens if you install official ICS with Odin?
Sent from my GT-P7310 using xda app-developers app
I can't even get into the tab to do anything at this point.
vinfromuk said:
I can't even get into the tab to do anything at this point.
Click to expand...
Click to collapse
You could see if odin still recognize it and fish a stock rom. But by the sound of it I think you're sol.
Sent from my SGH-I727 using xda app-developers app
Odin recognised it and has flashed the right ICS official, but it just sits on a glowing Samsung logo.
Odp: [Q] Is my Tab dead?
I will wipe all data/cache from recovery and see if that works, but I'm not so experienced and you should wait for someone with proper knowledge to give you advice But you just might give it a try
First thing I tried, but thanks for the suggestion
vinfromuk said:
First thing I tried, but thanks for the suggestion
Click to expand...
Click to collapse
Do s factory reset. That'll work.
Sent from my SGH-I727 using xda app-developers app
I just applied the Honeycomb 3.2 shipped image using Odin and it seems to be working. Going to attempt to reapply CWM and flash an ICS build now..
Glad to hear it worked out for you.
Sent from my GT-P7310 using xda app-developers app
It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.
link
vinfromuk said:
It's been stable on the CM10.1 M2 build all day. I don't know why the official 4.0.4 firmware didn't work, but I'm glad I tried 3.2 before giving up.
Thanks again to everyone who offered suggestions.
Click to expand...
Click to collapse
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R
AnRkey said:
Be a ninja and paste the link to the rom you used. I've borked my upgrade too. I can get in to loki for oden to send the rom, just need the rom that will work with oden.
Thanks,
R
Click to expand...
Click to collapse
You can get the stock firmware from sammobile.com. just register on line, it's free.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
http://samsung-updates.com/device/?id=GT-P7310
I flashed the 4.0.4 from here and it didn't work, so I tried the 3.2 and restored it to shipped state using Odin. After that I rooted and reinstalled CWM with Odin, and then flashed the CM 10.1 M2 build from the Development forum here the usual way (copy to SDcard, reboot recovery).
Good. I should have mentioned you have to start with gingerbread. Could have saved you a step.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

flash tmobile rom on att note has slow down

i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
rastlin said:
i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
Click to expand...
Click to collapse
I ran into the same issue boot back to your cwm and flash another modem then reset and you should be good to go, Keep trying modems till you find one that you like
w.working said:
I ran into the same issue boot back to your cwm and flash another modem then reset and you should be good to go, Keep trying modems till you find one that you like
Click to expand...
Click to collapse
This is because the T-Mo Modem should be edited for AT&T...
How do you edit modems?
Sent from my Nexus 7 using XDA Premium HD app
MasterKaiser said:
This is because the T-Mo Modem should be edited for AT&T...
Click to expand...
Click to collapse
How do you edit modems
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
chiikko561 said:
How do you edit modems
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I do not edit any modem, they are already modded, some great people here already did it for us. Since this post it kind of old, I do not remember who did it, but you can search in the thread.
Try going in to mobile network setting and registering in tmobile network.
Sent from my SAMSUNG-SGH-T879 using xda app-developers app
Why would you want to do that? I am using Tmo service on an ATT Note with a ATT Rom and Radio. Runs flawless and I get 30 MBPS download speeds.
HD2FORNICK said:
Why would you want to do that? I am using Tmo service on an ATT Note with a ATT Rom and Radio. Runs flawless and I get 30 MBPS download speeds.
Click to expand...
Click to collapse
Which Att Rom you using and what modem you are using. I have i717 and I tried several rom's and modem's but still cannot find a good match.
If I load Tmo rom's, I can't even install them as the installation gets aborted before mine is i717 device which is att but I thought i717 and T879 same.
Anyways please let us know what's your combination so I can try it out too. By the way I am trying to use i717 with Wind Mobile in Canada which is same as TMO.

n7000 won't turn on, pc doesn't recognize after CWM FLASH

So, i get galaxy note n7000. It was running 4.0.4 stock. I flashed kernel with odin with root + cwm. Then i wiped data, tried to install rom (it was miui 3.9.6 from here) progress stucked on /formatting system. Then screen went black and phone won't turn on after that. I founded one user from russian forum who had same issue, idk how he fixed it..
So, phone won't turn on , go to recovery, pc can't see it. hardly bricked? By cwm flash..?
Phone has got warranty. Maybe i should bring it to them? Could they know that phone was rooted?
Seems i have the same problem like here...
Which Cwm did you use? Was it Cwm. Zip?
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
Which Cwm did you use? Was it Cwm. Zip?
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
cwm 5. I heard about cwm zip, but no. I got cwm by installing custom kernel in odin. Or you're talking about something else?
And yes, i'm soon going to the carrier where this phone was bought. Which is the best version to tell? OTA update?
Yeah, just say it failed doing ota update.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
Yeah, just say it failed doing ota update.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay, wish me good luck.
Today i've got my phone back with replaced mobo and micro usb port.
Well,be happy you didn't have to pay for that. Now read about the brick bug.

[Q] No bootloader

Hey guys,
My friend gave me his Ace (S5830) that he had managed to soft brick while trying to root it. He also wanted CM10.1 on it. I found tutorials online, and flashed what claimed to be a CWM recovery .tar and the OPC in Odin, so it now boots to how he had it before. However when I use any tool to boot into recovery, it soft bricks again, with the Samsung logo and web link, so I have to use Odin to fix it again. If I try power+menu on boot it just shows the logo and link, however taking the battery out lets it boot normally. Should I install a stock firmware from sammobile.com, or give up?
P.S. If stock restore, how?
FelixJ20000 said:
Hey guys,
My friend gave me his Ace (S5830) that he had managed to soft brick while trying to root it. He also wanted CM10.1 on it. I found tutorials online, and flashed what claimed to be a CWM recovery .tar and the OPC in Odin, so it now boots to how he had it before. However when I use any tool to boot into recovery, it soft bricks again, with the Samsung logo and web link, so I have to use Odin to fix it again. If I try power+menu on boot it just shows the logo and link, however taking the battery out lets it boot normally. Should I install a stock firmware from sammobile.com, or give up?
P.S. If stock restore, how?
Click to expand...
Click to collapse
FIRST OF ALL, THIS IS THE GENERAL THREAD! THE NEXT TIME USE Q&A THREAD PLEASE!
http://forum.xda-developers.com/showthread.php?t=1768181
Which rom are you using?
Stock
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
Stock
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
which stock? 2.2.1, 2.2.2, 2.3.3, 2.3.4, 2.3.5, 2.3.6
Go settings >> about phone and check it
Erm… the one that came with the phone I guess
Sent from my iPhone using Tapatalk - now Free
felixj20000 said:
erm… the one that came with the phone i guess
sent from my iphone using tapatalk - now free
Click to expand...
Click to collapse
lol
please read above!
Oh dear, sorry. 2.3.6
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
Oh dear, sorry. 2.3.6
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
did you flash CWM 5.0.2.6. FIXED?
Or which recovery are you using? stock recovery?
Here you can find all your answers and files, I posted that before "how to root, install CWM 5.0.2.6. Fixed and flash a STOCK rom via Odin"
http://forum.xda-developers.com/showthread.php?t=2313363
When he got it off eBay it was rooted, but no bootloader
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
When he got it off eBay it was rooted, but no bootloader
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
Ok then, flash a stock rom via Odin
You can get Official firmwares from here
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=0#firmware
He used ROM Manager to boot into recovery, but it didn't have one, so it was basically bricked.
Sent from my iPhone using Tapatalk - now Free
Ok, then will it have stock bootloader?
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
He used ROM Manager to boot into recovery, but it didn't have one, so it was basically bricked.
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
!!!!
WHAT!!!!!!!!!!!!
NOOOOOOOO!! Your friend used ROM MANAGER? REALLY?
ROM MANAGER KILL ACE!! HE SHOULDN'T USE IT!!
Could you boot into download mode? if you can follow the steps and try to flash a Stock rom using Odin
?
Sent from my iPhone using Tapatalk - now Free
Please read the top post
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
?
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
ROM MANAGER = BRICK (in most cases irreparable damage)
Rom manager fries the Ace's SoC
http://forum.xda-developers.com/showthread.php?t=1942957
Ok
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
Ok
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
:good:
Try to boot into download mode and flash a stock via Odin
But it boots OK now, as long as it's not rebooted into recovery by ADB or an app. Will a stock rom via Odin fix the bootloader issue?
Sent from my iPhone using Tapatalk - now Free
FelixJ20000 said:
But it boots OK now, as long as it's not rebooted into recovery by ADB or an app. Will a stock rom via Odin fix the bootloader issue?
Sent from my iPhone using Tapatalk - now Free
Click to expand...
Click to collapse
Yes, it should fix it so do it and then flash the files that you'll find in the first link I posted "Root+ CWM 5.0.2.6. Fixed"

Need help installing a ROM on vs98011a please help

So I have a vs980 I am very very familiar with Roms and Recovery's and all that have been flashin stuff for ever BUT this phone here I am having issues with I am using it on T-Mobile so I have to stay below KitKat in order for the phone to get data for some reason when I install twrp via autorec and then reboot I to recovery to try and install a ROM it bootloops or it'll just go black on EVERY ROM I really would like to have this done so that I can install a ROM and get rid of the annoying r above the signal bar and the Sim card symbol with the ? Mark in it please any advice will help as I can't figure it out in the forums
Sent from my VS980 4G using XDA Free mobile app
androidreviewguy said:
So I have a vs980 I am very very familiar with Roms and Recovery's and all that have been flashin stuff for ever BUT this phone here I am having issues with I am using it on T-Mobile so I have to stay below KitKat in order for the phone to get data for some reason when I install twrp via autorec and then reboot I to recovery to try and install a ROM it bootloops or it'll just go black on EVERY ROM I really would like to have this done so that I can install a ROM and get rid of the annoying r above the signal bar and the Sim card symbol with the ? Mark in it please any advice will help as I can't figure it out in the forums
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
You need to update your baseband to match the rom version, have you done that?
Hey I am really not too sure if I have done that or not is there any possible way you could maybe tell me how to do that or figure out how to match the baseband choose a version that I am on which would be the 11a
Sent from my VS980 4G using XDA Free mobile app
androidreviewguy said:
Hey I am really not too sure if I have done that or not is there any possible way you could maybe tell me how to do that or figure out how to match the baseband choose a version that I am on which would be the 11a
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
What rom are you trying to install?
I'd like to use cm11 or whatever the best stable one is out I really appreciate your help btw
Sent from my VS980 4G using XDA Free mobile app
This is what I had to downgrade to in order to get T-Mobile data to work
Sent from my VS980 4G using XDA Free mobile app
..
androidreviewguy said:
I'd like to use cm11 or whatever the best stable one is out I really appreciate your help btw
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
CM11 is KitKat, if you need Jellybean on the phone to work with T-Mobile, there aren't many choices out there, you'd have to look through the older dev threads for 4.2.2 roms...
So in order to get a ROM it'll have to be a jellybean ROM? How would I put a recovery on the phone just through the autorec apk? And if I was to put a 4.2.2 ROM on the phone would it honestly work or bootloop me?
Sent from my VS980 4G using XDA Free mobile app
androidreviewguy said:
So in order to get a ROM it'll have to be a jellybean ROM? How would I put a recovery on the phone just through the autorec apk? And if I was to put a 4.2.2 ROM on the phone would it honestly work or bootloop me?
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
You have the right bootstack (sorry confused that with baseband) for a JB rom. You may want to look at this though..
People running KitKat with T-Mobile. - http://forum.xda-developers.com/showthread.php?t=2727307
You'll need to upgrade your bootstack to match the rom version, you can find basebands here in the bottom of the first post - http://forum.xda-developers.com/showthread.php?t=2715408
I appreciate that I think I may end up having to stay on the stock jellybean though lol sucks but that's just what I think it is it looks extra complicated all though I am sure it's simple but look super complicated ha. I have no idea what a bootstrack is even after reading that
Sent from my VS980 4G using XDA Free mobile app

Categories

Resources