Database Develop

need N! back to stock with OTA updats. HELP!!

I have been searching for awhile now, and just can't seem to find out what I need. I have a rooted N1 that I was running Kang-O-Roma's Latest Froyo build and Radio on it, but now need to get it back to stock with OTA updates. I flashed a the stock image that I got from the developers section, but still no updates. when the phone downloads an update it just restarts in recovery. I thought I may need to downgrade the radio, but no luck. I baught an Evo and am selling my beloved N1, but the person who baught it wants it completely stock, and able to get updates. he doesn't mind it being rooted if this is possible. Please help.

hurrycaine3000 said:
I have been searching for awhile now, and just can't seem to find out what I need. I have a rooted N1 that I was running Kang-O-Roma's Latest Froyo build and Radio on it, but now need to get it back to stock with OTA updates. I flashed a the stock image that I got from the developers section, but still no updates. when the phone downloads an update it just restarts in recovery. I thought I may need to downgrade the radio, but no luck. I baught an Evo and am selling my beloved N1, but the person who baught it wants it completely stock, and able to get updates. he doesn't mind it being rooted if this is possible. Please help.
Click to expand...
Click to collapse
reboot the phone into bootloader then use the passimg file to return back to stock once this is done it should reboot into 2.1 then leave it alone till u see the update available or use the code to force the update then reboot and it should pop up within a few hours...

The update pops up, It downloads it, it even says what the update includes, but then when it tries to install, it restarts back into recovery mode, and doesnt' install the update. Is the update on the phone somewhere? I still have the froyo radio on the phone, because I cannot find and original Radio update Zip. Adb won't work on my new computer.

Did you get the stock recovery back in there or still using a custom one?

I loaded the stock image found in the developers section under original shipping, but it didn't downgrade the radio. I followed all of the instructions, but still, the update won't install. I have been searching and searching, but still can't come up with a solution.

hurrycaine3000 said:
I loaded the stock image found in the developers section under original shipping, but it didn't downgrade the radio. I followed all of the instructions, but still, the update won't install. I have been searching and searching, but still can't come up with a solution.
Click to expand...
Click to collapse
yes you need the stock pass img file so it can bring everything to stock including the recovery....do you still have the custom recovery??it wont work with it i beleive...

The passimg file will take everything back to stock: ROM, Recovery, and Radio

J.L.C. said:
The passimg file will take everything back to stock: ROM, Recovery, and Radio
Click to expand...
Click to collapse
yes it would if you are using the right file then it should work...fine....

thanks for all the help, I had flashed the stock ROM, but not the passimg.zip. so even though the rom was right everything else was not. Thanks again. I'll wait to see if I get an update.

hurrycaine3000 said:
thanks for all the help, I had flashed the stock ROM, but not the passimg.zip. so even though the rom was right everything else was not. Thanks again. I'll wait to see if I get an update.
Click to expand...
Click to collapse
no problem hope this works!

Ok, this should be my last question on this subject. under about phone it now says:
Model Number-
Nexus One
Firmware version-
2.1 update 1
Baseband version-
32.26.00.24U_4.04.00.03_2
Kernel version-
2.6.29-01117-g4bc62c2
[email protected] #1
Build number-
EPE76
As I recall EPE76 was a leaked ROM
I tried using 22607-ERD79-update-nexusone-stock-signed.zip and renaming it passimg.zip , but that didn't work. am I OK with the EPE76 build or do I need to get the ERD79 build on there to be?
A: get updates, and
B: truly be stock.
thanks again. I had no problem when I was trying cooked roms and updating radios and stuff. go figure this would be the thing to get me stuck.

hurrycaine3000 said:
Ok, this should be my last question on this subject. under about phone it now says:
Model Number-
Nexus One
Firmware version-
2.1 update 1
Baseband version-
32.26.00.24U_4.04.00.03_2
Kernel version-
2.6.29-01117-g4bc62c2
[email protected] #1
Build number-
EPE76
As I recall EPE76 was a leaked ROM
I tried using 22607-ERD79-update-nexusone-stock-signed.zip and renaming it passimg.zip , but that didn't work. am I OK with the EPE76 build or do I need to get the ERD79 build on there to be?
A: get updates, and
B: truly be stock.
thanks again. I had no problem when I was trying cooked roms and updating radios and stuff. go figure this would be the thing to get me stuck.
Click to expand...
Click to collapse
hmm i can try to post the link to u so u can download the img i have that is definite a work for me?? email if you want it faster...

@OP
If you're still have problems, this thread has all the files you need in the first post: http://forum.xda-developers.com/showthread.php?t=614850
I bought my Nexus One off another member here, and he was kind enough to flash back to the original ERD79 before he sent me the phone but he didn't flash the stock recovery.img. I got the update to Froyo almost immediately after I turned the phone on, but it would not install. After flashing the stock recovery.img the OTA installed just fine

xghostyxjokerx said:
hmm i can try to post the link to u so u can download the img i have that is definite a work for me?? email if you want it faster...
Click to expand...
Click to collapse
here it is http://www.4shared.com/file/GqphBx3X/PASSIMG.html

xghostyxjokerx said:
here it is http://www.4shared.com/file/GqphBx3X/PASSIMG.html
Click to expand...
Click to collapse
I tried installing this one, and it said "The main version is older" and then asked if I want to restart.

hurrycaine3000 said:
I tried installing this one, and it said "The main version is older" and then asked if I want to restart.
Click to expand...
Click to collapse
go root to 2.2 or 2.1.update 1 first then use it okay..

Now that you mention it I do remember seeing something about that, while I was searching for an answer to this dilemma. Thanks again, I'll let you know.

hurrycaine3000 said:
Now that you mention it I do remember seeing something about that, while I was searching for an answer to this dilemma. Thanks again, I'll let you know.
Click to expand...
Click to collapse
okay... will b around if needed..

[Q] Question about firmware...

Alright, so I updated my phone when the first OTA update was released, and it installed successfully no problems. After this I got into rooting my phone so that I could get rid of the AT&T crapware, use launcher pro, and enable sideloading for apps. I thought that I would check for another update since rumors were swirling about 2.2, and to my surprise it detected a package to download. I was able to download it, however it wouldn't finish installing on the phone and said that it could not be installed. Thinking that this was due to my root, I used Odin to flash back to stock and retry the install, and it still didn't work. So, after that I reverted back to the root, and decided to go and check the firmware and baseband version What is confusing to me is that for "firmware version" it says that I have "2.1-update1", but my baseband version still says "1897UCJF6" instead of "JH7". Now when I try to install whatever supposed update that is available, it downloads and then gets stuck at 50% in the progress bar when trying to install. So I guess my question is, should I be worried about this? Is this the current version, and does it just say "JF6" because of my root? Also, will I need to unroot if I want to install the 2.2 update whenever it comes out?
I apologize for the novel, I'm just trying to be as informative about my situation as possible. Any help with this would be greatly appreciated.
Thanks

JF6 is the stock firmware and JH7 was the ota update.
Sent from my Captivate

Alright thanks, but why is my phone still displaying "2.1-update1" if I still have the stock firmware? Is it because of the root that it is displaying JF6 instead of JH7?

goosefraba91 said:
Alright thanks, but why is my phone still displaying "2.1-update1" if I still have the stock firmware? Is it because of the root that it is displaying JF6 instead of JH7?
Click to expand...
Click to collapse
JH7 was also considered 2.1-update1
there is not an official 2.2 yet

Okay well thanks, I think I'm about to just flash to a 2.2 ROM, I'm tired of waiting on samsung for 2.2

i need help with the rooting of my phone

bosoxtm said:
i need help with the rooting of my phone
Click to expand...
Click to collapse
View this topic:
http://forum.xda-developers.com/showthread.php?t=739304

[Q] Trying to install custom ROM with SECURITY ERROR

I see there are a lot of articles saying how this should be done but at least in my case I haven't had luck with any of them.
After you read this you must realize I'm a noob on this.
I have ICS 4.0.4 Stock Firmware from TELCEL, Mexico and I'm having no luck getting the custom ROM installed or at least downgrade I think it will be better. The main problem with the phone is the battery life and it's slow, all after the phone upgraded to ICS.
I will do anything you guys suggest if you could please point me in the right direction.
A few things I've tried:
I've Rooted the phone using Unlock Root application suggested by one of the post I found here.
I've Installed ROM Manager and flashed the CWM Recovery Touch tool and followed the instructions to use a Zip, I was trying with the Zeuz Gingerbread ROM I downloaded from here but after the phone reboots all I get is "LG logo saying SECURITY ERROR"
Anyone has gone through this issue?
BTW: after the LG Security Error I have to get into S/W Upgrade and run the LG Mobile Support Tool to let it flash the stock firmware again.

Moreno92 said:
I see there are a lot of articles saying how this should be done but at least in my case I haven't had luck with any of them.
After you read this you must realize I'm a noob on this.
I have ICS 4.0.4 Stock Firmware from TELCEL, Mexico and I'm having no luck getting the custom ROM installed or at least downgrade I think it will be better. The main problem with the phone is the battery life and it's slow, all after the phone upgraded to ICS.
I will do anything you guys suggest if you could please point me in the right direction.
A few things I've tried:
I've Rooted the phone using Unlock Root application suggested by one of the post I found here.
I've Installed ROM Manager and flashed the CWM Recovery Touch tool and followed the instructions to use a Zip, I was trying with the Zeuz Gingerbread ROM I downloaded from here but after the phone reboots all I get is "LG logo saying SECURITY ERROR"
Anyone has gone through this issue?
BTW: after the LG Security Error I have to get into S/W Upgrade and run the LG Mobile Support Tool to let it flash the stock firmware again.
Click to expand...
Click to collapse
The boot loader is locked. There are a number of tutorials on how to unlock it, but you need the original Froyo or Gingerbread ROM images from LG. Locating those seems to be the tough part. You downgrade to the earlier version, then you unlock.

Thanks for pointing me in the right direction
androcraze said:
The boot loader is locked. There are a number of tutorials on how to unlock it, but you need the original Froyo or Gingerbread ROM images from LG. Locating those seems to be the tough part. You downgrade to the earlier version, then you unlock.
Click to expand...
Click to collapse
Hey man thanks for your tip, after searching for the right problem I was able to unlock the bootloader and instal IZS ROM with no problems... I'll test it and try different rooms if this doesn't solves my issues.:good:
Here is the thread that helpemd me unlocking it without the need of Froyo or Gingerbread downgrade.
http://forum.xda-developers.com/showthread.php?t=1111771

Odin flash auto-reverts after rebooting

Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated

Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/galaxy-s4-active/help
The experts there may be able to help. Good luck.

I need help, its quite an expensive phone to just give up and throw it away
nexware said:
Hi guys, i have an s4 active i9295 with a bootloop, so i decided to flash stock rom via odin as i always did with samsung phones with this problem but every time i flash a rom (i tried different ones) the phone restarts as normal but when the samsung logo appears then it says on the top left with blue letters revocery booting, then it does something with a progress bar and an android logo above and restarts. When it boots again its back at the bootloop, im an absolute noob in this but what i understand is happening is that the phone is reverting the flash i did with odin and i want to know what am i doing wrong, is this supposed to happen? Any help will be much appreciated
Click to expand...
Click to collapse
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop

nexware said:
C'mon guys you may know what is going on with my s4, no matter what i do it bootloops, tried everithing
pit + firmware on odin, still bootloops, wipe data/cache after and before flashing, still bootloops, i researched a lot and tried almost everithing with the same result, please help me, i'll personally bake a cake to the first nice guy to help me get out of the bootloop
Click to expand...
Click to collapse
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?

Droidriven said:
I'll try to help you, what did you install or modify that caused the bootloop in the first place? Was your device rooted? Did you have custom recovery? What recovery? Did you have a custom ROM? What ROM?
Click to expand...
Click to collapse
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?

nexware said:
I received the phone as it is with the bootloop, don't know much of its state before but i was told that it was a bad flashing procedure the cause of the problem. It had stock recoverys from the different roms i flashed in odin: I9295XXUDOB4
I9295XXUCNE5
I9295VJUDOF1
There was one time i managed to make it boot flashing CWM and installing cyanogenmod 12.1 but on restart it kept bootlooping again and i was unable to get it to boot again even repeating exactly the same steps i did before.
I want to make an absolute clean firmware flash with the original rom that this phone came in my country (VJUBMK4) but from what i understand once im on newer versions (im not sure if 4.3 or 5.0) i cant downgrade.
I really don't know what is it causing the bootloop, how can i get the pone to factory firmware? Am i doing something wrong?
Click to expand...
Click to collapse
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk

Droidriven said:
Ah, it sounds like you have one of the devices with locked bootloaders then if you can't downgrade, if that is the case you can't use CWM, TWRP, CM or AOSP custom ROMs, those devices have to use Safestrap and modified Stock ROMs. Or you may can unlock the bootloader. I'm not sure that is your problem but you can check it out.
You can flash the newest stock firmware and just be done with it, you may not be able to root and flash custom but the device will at least work.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?

nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Boot into download mode by holding the volume down + power button and see what is the device name listed there

nexware said:
How can i be sure that the device has a locked bootloader? If that's the case, what can i do to make it to just work as stock? I need a special kind of stock firmware?
Click to expand...
Click to collapse
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.

JASONRR said:
Boot into download mode by holding the volume down + power button and see what is the device name listed there
Click to expand...
Click to collapse
It says this:
PRODUCT NAME: GT-I9295
CURRENT BINARY: Custom
SYSTEM STATUS: Official
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: ENABLE
eMMC BURST MODE enabled

Devo7v said:
Take the cover off and pull the battery, the label under the battery should have the model number for the phone.
If the model is GT-i9295, then you have an unlocked bootloader and should be able to flash any firmware.
If the model is SGH-i537, then you have a locked bootloader and can only flash firmware meant for that phone.
Once we know which phone you have we can help you.
Click to expand...
Click to collapse
Its GT-i9295

Can you flash VJUCNI1 or VJUDOF1?

AT&T Note 3 (USA) - Emergency Call Only

Hi Everyone,
I am kind of lost in the upgrade process.
6 months ago, my Samsung Note 3 (USA AT&T) phone was working perfectly fine, but just with OLD firmware. ,then due to urge on upgrading, i searched so many sites and found a link somewhere on droidviews.com (as my firmware was NJ1 or something, website said i need to upgrade to NC2, and then to OC1), this process messed up my phone call receiving & making capabilities.
Most of the time callers see me unreachable and I am unable to call them as i get "emergency calls only"....I still don't have a way out from this issue. Some places I read i need to install right CSC / modem etc, I even tried this thread by reflashing using ODIN & N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar. Even after this, i still have calls related issues same as above.
Can someone guide me to right direct (or) did i totally messed up with this? BTW, i am now in INDIA, using Airtel services...

I believe nj1 firmware is newer than nc2.
The Odin files came from here: https://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 ?

audit13 said:
I believe nj1 firmware is newer than nc2.
The Odin files came from here: https://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 ?
Click to expand...
Click to collapse
Thanks. I tried flashing to OC1, still same problem. my calls are mostly not working. Is there a way i can go back to original 4.3 stock rom that came with Note3 AT&T? or is there a way i can get current AT&T rom (latest) to try with?
Good part is, i can go between 4.4.3 and 5.0 as i have original stock roms downloaded. But bad part is, my calls still failing...
appreciate any clue/help.

Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.

audit13 said:
Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.
Click to expand...
Click to collapse
Hi, i downloaded NC2 & OC1 stock firmwares from XDA only. they are loading up fine (using ODIN). But my calling problem remains same.
So, Yesterday, i tried rooting the phone and installed AllianceROM. then i went into series of issues like "unfortunately NFC has stopped", "unfortunately settings has stopped" etc... then followed the instruction to wipe/factory reset, 3 to 4 times and disabled NFC services etc. As of now, phone works fine, but still need to check the calling function for a week...
thanks for your time.

audit13 said:
Where did you get the stock ROM? AT&T never released full firmware for the 900a.
There is no way to go back fully to 4.3 since the phone bootloader can be downgraded to 4.3.
Click to expand...
Click to collapse
Are we SOL with 900a? I was in the wrong forum earlier and was ready to use update to 7...until I realized it wasn't for me.
Dying on Lollipop (where I landed after the 7 fallout)

I re-read my post and noticed that I made an error: the bootloader on an n900a CANNOT be downgraded.
You cannot flash any ROM to the phone using TWRP, you must use flashfire. Only ROMs based on the stock Samsung ROM can be flashed to the n900a.

audit13 said:
I re-read my post and noticed that I made an error: the bootloader on an n900a CANNOT be downgraded.
You cannot flash any ROM to the phone using TWRP, you must use flashfire. Only ROMs based on the stock Samsung ROM can be flashed to the n900a.
Click to expand...
Click to collapse
We can flash roms using safestrap and flashfire