Help with Bootloop issue - Nook HD, HD+ Q&A, Help & Troubleshooting

Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!

wasabitobiko said:
Ok.. So.. I had CWM 6.0.4.x loaded on my HD+ with Cyanoboot (rooted) running Cyanogenmod 11.x kitkat 4.4.2. The problem was CWM wasn't working so I tried to flash an img of openrecovery2.7.1-4.4 so I could try out another ROM.. now when it tries to start, I get the nook screen for about 2 seconds over and over and over.. until I do a hard shutdown.. any help is much appreciated..
Cheers!!
Click to expand...
Click to collapse
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks man.. I'll give it a shot and let you know how it goes.
Cheers!

Stuck at CWM main screen
leapinlar said:
I suggest you go to my HD/HD+ CWM thread linked in my signature and make a bootable 6028 SD per item 1a and use that to flash a plain stock zip from item 6. That should get you back going and you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!

wasabitobiko said:
OK.. finally got around to dealing with my device. I created the sd card and am able to boot to cwm but that's it. CWM won't do anything, install zip from sdcard, sideload, wipe, backup/restore, mount.. nothing works. It just reverts back to the main CWM screen.. ADB doesn't recognize my device, etc.. any help is, once again, much appreciated.
Cheers!
Click to expand...
Click to collapse
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app

Dohhhhhh..
leapinlar said:
you are pressing the wrong button. N is the select button. You are pressing power.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
What a dumbass!!!... Got things working again.. Huge thanks... again!!
Cheers!

Related

[Q] Where can I get stock ROM for restoring Nook HD+?

Hello,
Kudos to all the nice folks here for the CM mod and updates.
My Nook HD+ has battery issues and was told to send it back to B&N. I took a backup of the stock ROM before installing CM but I'm unable to find it :crying:
I've searched a lot for this and would really really appreciate a link to download the ROM and copy to the microSD card.
I believe I just need the "clockworkmod" folder on the microSD card, right? If not, it would be great to have quick steps.
Thanks again for your time..
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can get the plain stock zip that is flashable with CWM from my HD/HD+ CWM thread linked in my signature. Item 6. That will take you back to pure stock so you can deal with B&N.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks a lot for your prompt response, leapinlar.
I downloaded "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).zip" and extracted it to get "NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13).img" which I burned to the microSD card using "Win32DiskImager"
And then, I copied "NookHDplus-factory-2.1.1-plain-stock.zip" file to the card. I tried inserting this card to the Nook HD+ device but it just boots to CM instead of showing options to restore.
I believe I'm missing something. I'm so sorry to bother you but would greatly appreciate if you could spare a few moments to point me in the right direction. It would be immensely helpful.
Thanks so much again for responding.
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You can try using my alternate procedure in item 1a in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks again, leapinlar.
I tried the alternate procedure and did the following:
1. Used "SDFormatter" to format the card and used "EaseUS Partition Master" to make the single partition on the microSD card "active"
2. Copied files making sure to copy "MLO" file first before copying the rest. (Please refer to attachment for the files that were in the card)
I was able to complete the "install from SD card" option and it finished with the following message:
Code:
Random Offset: 0xcb
Boot Files...
Boot Files...
Install Complete.
When I tried rebooting the device, Nook HD+ seems to load stock but gets stuck at 99% forever. Not sure how to proceed now. Can I just go ahead and return the device or should I bring it to working condition?
Thanks again for sparing your time, leapinlar.. Greatly appreciate it.
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
just to confirm
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
banditsw said:
Hi. I am selling my nook hd+ and would like to restore the B&N stock rom. I am running CM 10.1 stable. Based on this thread and leapinlar's advice in his CWM thread, I have the following steps:
1. Place the backed-up nook rom zip in the CWM folder.
2. Reboot into CWM recovery
3. Wipe data and rom
4. Flash the stock zip file
Based on leapinlar's advice in his CWM thread, it is my understanding that flashing the zip will fully restore the unit to stock rom, including stock recovery. Is that correct?
EDIT: Sorry, but perhaps I was mistaken. The stock rom zip has to be loaded on the bootable CWM sd card?
Appreciate all input. Thank you.
Click to expand...
Click to collapse
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Restoring the backup will only do the ROM and not recovery. You must flash the plain stock zip if you want both replaced. And yes, you copy the zip to the SD. And just do the factory reset, no other wiping.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
banditsw said:
Thank you!
When you refer to factory reset, you are referring to factory reset of the current rom on the unit (i.e. in my case, CM 10.1)?
Click to expand...
Click to collapse
I am talking about booting to CWM and selecting factory reset on the main menu. That will wipe all installed apps and settings on whatever is installed on internal memory.
Sent from my BN NookHD+ using XDA Premium 4 mobile app
leapinlar said:
Did you do a factory reset with CWM before rebooting after flashing the plain stock? You need to.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks so much, leapinlar. That worked!
adding to this
muchcalmer said:
Thanks so much, leapinlar. That worked!
Click to expand...
Click to collapse
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
gomavs123 said:
Hello guys, I would just like to add to this- I actually wanted to restore to stock rom as well.
I remember using the img burn method as outlined before to get to cwm recovery. I actually tried the new method involving just formatting and copying the 5 boot files and copying the zips as well. However, with the sd card in the slot, the device just boots to the stock rom.
From reading leapinlar's guide, I remember saying that it will take about 10 boots to boot into cwm recovery- however, I did over 15 times now and with no success- is there any other way to get to recovery mode quicker?
I actually ended up running into TWRP recovery and there did the flashing of stock rom, but it didn't get rid of the cyanoboot screen- I think I need to go through one more factory reset in order to get rid of the boot screen, and therefore will need to access the cwm recovery.
Any help will be appreciated. thanks
Click to expand...
Click to collapse
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
gomavs123 said:
thanks for the reply-
Actually I did do that- and sure enough the nook logos are showing now- but the cyanoboot logo still shows in the beginning. I think the solution is to try these steps again in cwm recovery instead of twrp- not sure how to get there though- can you offer me any advice in booting into cwm recovery mode ? Doing the recovery multiple times haven't really worked out so far.
Click to expand...
Click to collapse
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Are you sure you flashed the plain stock and not my rooted stock? Rooted stock would cause the cyanoboot logo to still show.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
gomavs123 said:
yes! I actually flashed the rooted stock. So then the next question I have is- is it possible to have no cyanoboot logo yet have the device rooted?
also, I am still wondering as to why the cwm recovery is not showing up when I use my sd. is the method using img recovery still valid?
thanks for your help, as always.
Click to expand...
Click to collapse
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Yes, my root methods before rev3 used the old way of rooting, without the revised boot.img. But those versions did not have the /system file protection removed. But I removed it from my site when I published rev3.
And yes the CWM SD is still valid using both methods. But sometimes the img method is harder to achieve.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
brux4me said:
do you mean by flashing universal root rev2 on pure stock rom, there should not be cyanboot logo?
can you please explain removed system file protection? do you mean the root is not complete? some app can not get su access?
Click to expand...
Click to collapse
That is correct, there is no cyanoboot logo with rev2. And rev2 works perfectly as root.
What I mean by no removed file protection is that with rev2 you cannot change any files in /system without it being detected and on the next boot it resetting itself to pure stock with no root. With rev3 that file protection for /system is removed, but it shows the cyanoboot logo. It is a trade off.
If you want rev2 I can repost the link.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You flashed my plain stock 2.1.1 zip from my HD/HD+ CWM thread with TWRP? That should have taken it completely back to stock without the cyanoboot logo showing. Factory reseting will not remove it. Are you sure it completed properly?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
So, I have used every trick you have posted to recover or install a new rom. After I install the rom and GAPPS with the bootable SD card, I restart and it just sits on the NOOK screen. I did notice I get a this: INSTALLING UPDATE / Random OFFSET: 0x26d / Boot Files...Boot Files...
The Random Offset number changes each time I try to install the rom.......any ideas?

[Q] NookHD wont let me boot to stock after trying to install new rom

I was trying to install this: http://forum.xda-developers.com/show....php?t=2097731
because my tablet kept having soft reboots. I updated everything it told me to and now I have cyanoboot. I forgot to download the updated rom from:
http://forum.xda-developers.com/show....php?t=2063968
to my NookHD and I'm stuck at the bootloader like an idiot. I tried to adb-push the rom but no luck. I tried a tutorial but it wanted me to adb push to sdcard which I'm very sure it doesn't have enough space. I tried removing the micro sdcard to and see if it'll boot me back to stock but instead it tries to boot to cm which is not on the tablet anymore. Help me please.
Darkdeity9194 said:
I was trying to install this: http://forum.xda-developers.com/show....php?t=2097731
because my tablet kept having soft reboots. I updated everything it told me to and now I have cyanoboot. I forgot to download the updated rom from:
http://forum.xda-developers.com/show....php?t=2063968
to my NookHD and I'm stuck at the bootloader like an idiot. I tried to adb-push the rom but no luck. I tried a tutorial but it wanted me to adb push to sdcard which I'm very sure it doesn't have enough space. I tried removing the micro sdcard to and see if it'll boot me back to stock but instead it tries to boot to cm which is not on the tablet anymore. Help me please.
Click to expand...
Click to collapse
Got to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a (make sure to make a new one, don't use the one you had for the hybrid). Then use it to flash a plain stock 2.1.1 zip from item 6. Then do a factory reset with CWM. You should be fixed then and can start over.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Got to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a (make sure to make a new one, don't use the one you had for the hybrid). Then use it to flash a plain stock 2.1.1 zip from item 6. Then do a factory reset with CWM. You should be fixed then and can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks so much! You saved my life there XD

How to unroot a nook hd 9inch tablet back to nook os, currently has android

I am hoping someone knows how to unroot a Nook HD 9inch tablet. It currently has android on the device.
Thanks in advance :good:
Go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a and use that to flash the plain stock zip from item 6. Follow that with a factory reset by CWM and everything will be back to unrooted stock.
Sent from my BN NookHD+ using XDA Premium HD app
Unrooted and stuck in 99% Complete Boot With Stock
leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature and make a bootable CWM SD per item 1a and use that to flash the plain stock zip from item 6. Follow that with a factory reset by CWM and everything will be back to unrooted stock.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I followed your instructions from the previous post which were relatively easy and all went well until it booted up and started reinstalling and it is now stuck at 99% and I can't even shut it down. Suggestions?
UPDATE: Actually, I got it to shut down but it always hangs at 99%. Any suggestions?
jfenton57 said:
I followed your instructions from the previous post which were relatively easy and all went well until it booted up and started reinstalling and it is now stuck at 99% and I can't even shut it down. Suggestions?
UPDATE: Actually, I got it to shut down but it always hangs at 99%. Any suggestions?
Click to expand...
Click to collapse
Did you do the factory reset with CWM?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Did you do the factory reset with CWM?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I did.
I have just formatted my micro SD and the partition is set to ACTIVE.
I am however getting lost in your instructions where it discusses downloading the RAR file and extracting 5 files to create a bootable CWM card.
I can't for the life of me find those files? I am probably just missing something simple but if you could point me to them I would be grateful. This is for an HD+9".
Thanks,
jfenton57 said:
I did.
I have just formatted my micro SD and the partition is set to ACTIVE.
I am however getting lost in your instructions where it discusses downloading the RAR file and extracting 5 files to create a bootable CWM card.
I can't for the life of me find those files? I am probably just missing something simple but if you could point me to them I would be grateful. This is for an HD+9".
Thanks,
Click to expand...
Click to collapse
If you look at the files I have listed, one has the name BOOTFILES in the name and ends in .rar, which is a compressed archive file (like a zip is). You probably have your PC set to hide that extension when it gets put on your PC. In any case you need to extract the files that are archived in that rar file. I think the newer Windows knows how to extract those, but you may need special software to do it.
But you have me confused. How did you flash the stock zip and factory reset if you could not figure out how to make the CWM SD?
Sent from my BN NookHD+ using XDA Premium HD app

[Q] Nook HD boot loop issue

I have a strange issue with a nook HD where someone tried to do a CM upgrade to 11 from 10.2. The issue is that after they did this the tablet now is stuck in a boot loop where the Nook logo shows, then the cyanoboot logo, it will repeat this process for four times then load into clockwork mod.
I have tried to create bootable SD cards but I am unable to get it to boot the SD, it just repeats this cycle over and over.
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The update process should not be used to upgrade from CM10.2 to CM11.
Go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a. Use that to flash a plain stock zip from item 6. Follow that with a factory reset with CWM. That should get you back to pure stock. Then if you want CM11, go to the dummies guide linked in my signature and follow post 7 there.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Nightshades said:
I tried the stock images and for what ever reason they fail on install, the error is the device check of hummingbird.
Code:
assert failed getprop( ro.product.device ) == "hummingbird"
I know for sure that I have the right images, I am just not sure why my device is failing that check.
Click to expand...
Click to collapse
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using too new of a CWM. Did you make a new bootable CWM SD per item 1a as I recommended? It needs to be older than v6045.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Nightshades said:
It currently has 6046 installed, I am not sure how it got that version as it was your guide I followed when setting this up over a year ago I believe. I will have to see how I can roll it back.
Click to expand...
Click to collapse
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, you did not get in my guide a year ago, since v6046 did not exist then. You can go to my HD/HD+ CWM thread linked in my signature and get the v6036 from item 5. You can flash that with the v6046 CWM and it will replace itself with v6036. You can use that flash the plain stock zip. Be sure to use the HD versions.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Nightshades said:
I was able to get the stock image loaded, but I have not been able to get it to boot from a SD card after that. I have a SD card with CWM boot files on it but it will only loading the stock rom.
Click to expand...
Click to collapse
Sometimes it is hard to get an SD to boot. Follow the procedure in making the SD exactly as described in my HD/HD+ CWM thread, item 1a, including copying MLO first and not inserting the SD into the slot the first time until the device is off. Also try a different SD.
Sent from my BN NookHD+ using XDA Premium HD app

[Q] PLEASE HELP- My nook hd will only boot into CWM recovery

It will only boot into CWM-based recovery v6.0.2.7-stock.
I have tried to install zip from sd card. It installs. I installed Nookhd-CWM-60460-for-internal-memory-rev0-(07-13-14).zip. Then I installed cm-10.2.1-hummingbird.zip. Lastly I installed Gaaps-jb-4.2.1-20121128-signed.zip.
I restart the Nook and it boots right back into recovery.
PLEASE HELP.
english\alphabet said:
It will only boot into CWM-based recovery v6.0.2.7-stock.
I have tried to install zip from sd card. It installs. I installed Nookhd-CWM-60460-for-internal-memory-rev0-(07-13-14).zip. Then I installed cm-10.2.1-hummingbird.zip. Lastly I installed Gaaps-jb-4.2.1-20121128-signed.zip.
I restart the Nook and it boots right back into recovery.
PLEASE HELP.
Click to expand...
Click to collapse
Try taking it back to stock per my HD/HD+ CWM thread linked in my signature. Sometimes this clears this issue.
Sent from my SCH-i705 using XDA Premium HD app
is there any way you can give me step by step instructions because I am confused.
i tried to flash the stock zip. And status 7 appeared.
english\alphabet said:
i tried to flash the stock zip. And status 7 appeared.
Click to expand...
Click to collapse
You are using too new of a version of CWM. Use the one made from the instructions from item 1a. It has to be older than version 6045. Then use the CWM to do a factory reset and to flash the plain stock zip.
Sent from my BN NookHD+ using XDA Premium HD app
it worked but my touch screen won't work

Categories

Resources