I have been getting a few PM's for help with upgrading to a 4.4.2 device base. I would like to share what I think is the most efficient way to upgrade to 4.4.2 sources with the least issues. This is the method I use on my Mahdi Rom. I see devs with issues stopping them from going to full 4.4.2 device/kernel/vendor trees and I would like to help get some more roms updated. If most roms follow the same methods we can also have custom kernels again.
4.4 device tree: Heavily modified from our 4.2 CM device tree. I also fixed some RIL issues that would stop the new RIL from working in some roms.
4.4 vendor tree: Completely remade using hammerhead as the base for the best aosp compatibility. Only added necessary blobs to run our hardware. The old vendor tree had way too many added files that didn't need to be used as prebuilts. Added missing files that should be present in kitkat. Sprint camera is currently broken and hopefully a LS980 dev can figure it out (Believe this to be vendor related)
4.4 kernel - clean branch : Only added the commits required for the rom to function normally, specials thanks to rmcc (original author of ril, vibration, bt fixes in my kernel tree) and jackpotclavin for a lot of the original AOSP fixes and many things on the G2 tree. On the 4.4.2 tree I was unable to get call echo fixed and we had other strange audio bugs everywhere due to reliance on the stock rom and taiko file. I decided to replace all the vendor / kernel audio drivers with Nexus 5 wcd9320 drivers and use custom mixers and audio has been working perfectly so far. (All this is already in the links I posted)
Other requirements
This commit must be added to display-caf
Qcom common folder
CM media repo
If anyone needs help with issues updating a rom post here and I will try to help.
Of course, I'm no developer, but I just wanted to say thanks for all your help for the developing community DR87...As an avid ROM flasher, I am very excited at seeing the prospect of more roms being updated to use with 24A
thnx @dr87 from all of G2 community .
hmmmm ...
looks like some goodies are coming for my vs980 buddies
Time to get back to work ....
Hey people don't leave us Sprint G2 users behind.
Looking forward to a unified kernel for G2.
Also if in some way compatibility for jdi and lgd display panels could be found to co-exist in the same kernel it would be much easier for the kernel devs to put out their stuff in fewer kernel variants.
Just a thought.
You're a nice guy @dr87 for sharing to the other Devs.
Sent from my LG-D800 using XDA Premium 4 mobile app
This should be a bigg bigg sticky
Enviado desde mi LG-D802 mediante Tapatalk
Thanks dr87. I've been meaning to hit you up on hangouts, but I've been so busy with work lately. This will definitely help.
Anyone working on this with aospa sources? I am having media issues.
Sent from my LG-D802 using Tapatalk
Thank you so much for posting this, I am one of those PMers who were begging for the mighty wisdom of the doctor. :laugh:
If any of the other devs/maintainers would like a Hangout, I think that might be a great idea, I would be all for joining/creating it.
Reginald476 said:
Thank you so much for posting this, I am one of those PMers who were begging for the mighty wisdom of the doctor. :laugh:
If any of the other devs/maintainers would like a Hangout, I think that might be a great idea, I would be all for joining/creating it.
Click to expand...
Click to collapse
https://plus.google.com/+MarkoMan
Sent from my LG-D802 using Tapatalk
Reginald476 said:
Thank you so much for posting this, I am one of those PMers who were begging for the mighty wisdom of the doctor. :laugh:
If any of the other devs/maintainers would like a Hangout, I think that might be a great idea, I would be all for joining/creating it.
Click to expand...
Click to collapse
I'm getting my g2 today to work on updating Gummy to 4.4.2 sources so if you guys start a hangout, count me in. [email protected]
darkobas said:
https://plus.google.com/+MarkoMan
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
https://plus.google.com/+RussClark shoot me a Hangout and I will add you, please let me know which ROM you work on.
Will be updating Vanir this weekend
Hey doc! What do you know you are on the XDA Portal
http://www.xda-developers.com/android/need-help-updating-your-lg-g2-rom-to-4-4-2-sources/
Congrats you deserve it
arifqur said:
Hey doc! What do you know you are on the XDA Portal
http://www.xda-developers.com/android/need-help-updating-your-lg-g2-rom-to-4-4-2-sources/
Congrats you deserve it
Click to expand...
Click to collapse
Congratulations! Highly deserved! @dr87
arifqur said:
Hey doc! What do you know you are on the XDA Portal
http://www.xda-developers.com/android/need-help-updating-your-lg-g2-rom-to-4-4-2-sources/
Congrats you deserve it
Click to expand...
Click to collapse
Hah nice :good:
Anyone who forked the vendor repo should sync with me again, when I added the rest of the vendor folders I forgot to sort out the device filters which would cause some duplicate errors
hi dr87 this awesome thread is on the PORTAL...
~ups my bad, someone already told you...
thanks for this useful tree you made
I love your mahdi rom :good:
Just wanted to jump in here and say I appreciate all the work you guys are putting in.. I couldn't develop a wet paper bag but if any of you want a tester or somebody to chop it up with I'm your guy hit me up on hangouts [email protected]
Sent from my LG-LS980 using Tapatalk
@dr87, we seem to be having an issue with HD video with the new sources, any thoughts? Also if you want to join our group, there are about 7 of us in there now.
Thanks again for your hard work and huge thanks for sharing. :victory:
I've got slim booting on d800 and everything is working except for a few things I forgot to add overlays for. HD video is working fine on slim.
Related
Hi There we have found complete sources of our phone Micromax A110 MTK 6577
We were hoping if any one Awsum Dev could compile an omni rom for our Beloved Phone here is the link to the sources http://pan.baidu.com/s/1ACPRk#dir/path=%2F8377%E8%BD%AF%E4%BB%B6%E5%8C%85
If u want u can contact our devs u can contact @[email protected] and @khan_frd2002 and also our kernel dev @varun.chitre15
And for compiling there is this guide http://wenku.baidu.com/link?url=GlZC...3XdjfuZXcip5zm
I hope i will receive Positive results and replies
Thnx
Andromodgod:cyclops:
if possible please upload to a better file hosting site. this is so slow it's causing the download to fail
cybojenix said:
if possible please upload to a better file hosting site. this is so slow it's causing the download to fail
Click to expand...
Click to collapse
Thnx for the reply 2 Questions
Are you from the omni team I.E help us in making rom
How long would the compilation take
U can contact all of us we are at http://forum.xda-developers.com/micromax-a110/development
Or Here
http://forum.xda-developers.com/micromax-a110/
Link will be provided as soon as possible :angel:
I'm a contributor there. I'm just curious as to what parts they change. seeing as mtk devices are dirt cheap here, I might consider getting some to work on if their sources aren't desperately bad
edit:
compilation doesn't take long. getting to the stage of getting a working compilation may take a while though
ps can the file labelled "alps patch" be uploaded first please. thanks
Thnx
@cybojenix Thnx for ur interest in our Phone one developer @[email protected] is already working on cm 10.2
And Varun Chitre is also a great dev u can ask anyone and all of them will help u
About the mirror i dont think it is possible cuz most of the people(Dev) Live in india or other places where the Internet connection is slow u can use an extension for firefox i will link it to you https://addons.mozilla.org/en-US/firefox/addon/downthemall/
ANd please try not to post cuz if u see ur post it say """"555 Posts"""" Lucky number
U can PM Me Thnx
I will ask devs to mirror it
yes buddy mirroring is needed....the downloading speed is so less that my downld has failed more than 4 tiimes..
Alps Patch file
Here is the link to patch file @cybojenix http://d-h.st/BAg
Leeching that to take a look.
Since none of us have a 6577 device, someone else will have to do the bringup work, but it would be interesting to see how much commonality there is between 6577 and 6589.
Unfortunately the problem is MTK's sources are a disorganized mess, and in many cases, their HALs are just wrappers around a blob. The source we have for R819 is for 4.2 - while xplodwild got 4.3 partially booting on R819, so far, the display drivers just crash on boot on 4.4.
Entropy512 said:
Leeching that to take a look.
Since none of us have a 6577 device, someone else will have to do the bringup work, but it would be interesting to see how much commonality there is between 6577 and 6589.
Unfortunately the problem is MTK's sources are a disorganized mess, and in many cases, their HALs are just wrappers around a blob. The source we have for R819 is for 4.2 - while xplodwild got 4.3 partially booting on R819, so far, the display drivers just crash on boot on 4.4.
Click to expand...
Click to collapse
From what I've looked at so far in the uploaded patch file, it doesn't seem to be too good. I was expecting to see diff patches.. from what is included in it, it seems to be partial, and out of the camera, there are only headers.
Waiting for the full source to be uploadec
Sent from my Nexus 7 using Tapatalk
cybojenix said:
From what I've looked at so far in the uploaded patch file, it doesn't seem to be too good. I was expecting to see diff patches.. from what is included in it, it seems to be partial, and out of the camera, there are only headers.
Waiting for the full source to be uploadec
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Source are uploaded here you go http://forum.xda-developers.com/showthread.php?p=48303269
Sent from my Nexus 4 using XDA Premium 4 mobile app
[SOURCE]Full MTK6577 AOSP tree + proprietary source: http://forum.xda-developers.com/showthread.php?t=2172440
*edit: These are sources for ICS. Reason: http://forum.xda-developers.com/showpost.php?p=48307124&postcount=134
Progress
Any report on the progress @cybojenix
andromodgod said:
Any report on the progress @cybojenix
Click to expand...
Click to collapse
Sources seem somewhat unhelpful at a first glance, however going deeper into them may reveal key parts that have Been overlooked
Sent from my Nexus 7 using Tapatalk
Any Good News
DO we have any good news from u @cybojenix
We are eagerly waiting for u
andromodgod said:
DO we have any good news from u @cybojenix
We are eagerly waiting for u
Click to expand...
Click to collapse
Please, check this comments:
http://forum.xda-developers.com/showpost.php?p=48628112&postcount=43
http://forum.xda-developers.com/showpost.php?p=48642380&postcount=44
mtk你还是放弃吧，很多都没有开源的，mtk提供整套方案给生产商，连生产商都没有源代码的。
Sent from my One X using xda app-developers app
I thought it is complete
Sent from my Nexus 4 using Tapatalk
Any news?
Related:
MediaTek driver sourcecode (want custom ROMs? read this!): http://forum.xda-developers.com/showthread.php?p=50146816
No complete source, nothing to accomplish.
[SIZE=+1]CM11 for LG L90 LG-D415[/SIZE]
Ok guys and gals... I must first state that this is not my original work. The CM11 base I'm building off of is all due to the hard work and efforts of @Quarx. His ROM is located here for devices other than the LG-D415.
This thread was created to assist @Quarx by not littering his thread with posts for LG-D415 devices. He doesn't own a D415, but I do :silly:
With that said...
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to
make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
*/
[SIZE=+1]To use this ROM you MUST have an unlocked bootloader[/SIZE]
All specs with this ROM are the same as the specs with @Quarx ROM minus the fact that this ROM is built specifically for D415 devices
What's working
Bluetooth
Calls
Front camera
GPS
Mobile Data
Rear Camera
Superb battery life
WIFI
Most everything else
What's NOT working or working correctly
CM Updater ( Until I figure out how to implement my own )
Video recording ( front/rear camera. Works for some, not for others )
Video playback ( Works for some, not for others )
IR
LG Knock Code ( Double tap to wake )
Credits located in post #2
Changelog located in post #3
Download links are located in post #4
Source links are located in post #5
Installation
Boot to recovery ( Custom recovery required )
Wipe cache ( only required on first installation )
Wipe Dalvik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
Install ROM
Install GApps
XDA:DevDB Information
CyanogenMod 11 for LG Optimus L90 ( LG-D415 ), ROM for the LG Optimus L90
Contributors
shinobisoft
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-10-15
Last Updated 2014-12-17
Credits and Thanks
Credits
@Quarx - For getting everything started for developing for the LG L90
@CyanogenMod - For CM11 obviously
@k2wl - For assisting with tips/hints/suggestions
@demonslayer12349 - For assisting with tips/hints/suggestions
@shoxxy - For Philz-Touch recovery for our devices. Also for helping "behind the scenes"
Very Special Thanks
@jran0880 - For his donation of $50.00
Changelogs
12/02/2014
No changes to note on my end. View CM's changelog for any changes/updates.
10/22/2014
Removed NFC again
Removed FM Radio again
There may be some OS changes thanks to the CM team. See their changelog for changes.
SELinux is still disabled in this build. Device doesn't seem to like it when it's enabled. LOL...
Something else to figure out
10/07/2014
Changed kernel configs and dtbs from W7_TMO_US to W7_OPEN_CIS. My first few builds were built using W7_OPEN_CIS. Seems to be fewer issues with those ROMs than my most recent.
Re-enabled NFC. I'm starting to think it does exist on the device.
Re-enabled FM. Strangley I can at least hear static now. So the hardware may actually be there.
Any other changes would be OS related and would be noted by CM in their changelog.
Enabled the "Quick Key", the button above volume keys, to wake the display.
10/04/2014
Removed most NFC related stuff. D415 doesn't have NFC
Removed FM Radio.apk. D415 doesn't have FM receiver
FIX - Correct camera drivers now load on device start up
FIX - Video playback drivers
Too many other changes over the last month to begin to try and remember. LOL
My last sync with CM may have had some fixes incorporated. About a week ago
09/10/2014 - There have been no real "changes" in any of my builds besides editing some config files and adding files to fully specify the device as a w7 device and not a w7ds device. The D415 is not a dual sim device which I believe was part of the conflict between @Quarx builds and the D415 devices. So with the 09/10 build as far as I have been able to determine, everything about the build now identifies the device as a w7 device.
Downloads
Newest build: 2014-12-02 Mirror: 2014-12-02
Previous builds:
2014-10-22 Mirror: 2014-10-22
2014-10-07 Mirror: 2014-10-07
2014-10-04
2014-09-10
2014-09-07
2014-09-04GApps: http://forum.xda-developers.com/showthread.php?t=2397942
Use the link above for PA-GApps for the moment. I will put together a GApps package eventually. LOL :silly:
Recoveries: ( flash with fastboot, an app like Flashify, or my LG L90 Utilities )
CWM 6.0.5.1 ( Swipe up/down to scroll. Swipe left to go back, Swipe right to select ) Factory Reset: DISABLED
Philz-Touch 6.57.5 ( Thanks to @shoxxy )
The TWRP 2.7.1.0 package attached to this post is flashable via recovery.
Sources
GitHub Sources
Device: https://github.com/shinobisoft/android_device_lge_w7
Kernel: https://github.com/shinobisoft/android_kernel_lge_msm8226
AV Frameworks: https://github.com/shinobisoft/android_frameworks_av
LG Proprietary blobs: https://github.com/shinobisoft/vendor_lge_proprietary
I must stress again that these works are based off of the works of @Quarx - [Rom][DEV][4.4.4] CyanogenMod 11 for LG L90
Awesome! Looking forward to continued development ...just curious anything fixed from the 9/4 build to the 9/7 build?
Sent from my LG-D415 using Tapatalk
slamdunksaliby said:
Awesome! Looking forward to continued development ...just curious anything fixed from the 9/4 build to the 9/7 build?
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
Probably not. I've only been building with my fixes on top of @Quarx sources on GitHub. I'm still trying to get everything of mine over to GitHub at the moment. I unfortunately have a full time job so I don't have a ton of free time. The weekends are usually the only free time I have. I overslept today and decided to play hookey for the rest of the day. LOL. Imma bad bad boy LMAO.
When I get settled in to GitHub and have a chance to really check out the source code, I'll then see what I can do.
shinobisoft said:
Probably not. I've only been building with my fixes on top of @Quarx sources on GitHub. I'm still trying to get everything of mine over to GitHub at the moment. I unfortunately have a full time job so I don't have a ton of free time. The weekends are usually the only free time I have. I overslept today and decided to play hookey for the rest of the day. LOL. Imma bad bad boy LMAO.
When I get settled in to GitHub and have a chance to really check out the source code, I'll then see what I can do.
Click to expand...
Click to collapse
Haha no worries thanks so much
Sent from my LG-D415 using Tapatalk
Nice thing to see coming here tonight!!!! You're the best![emoji2] [emoji4] [emoji2]
Sent from my LG-D415 using Tapatalk
shinobisoft said:
Probably not. I've only been building with my fixes on top of @Quarx sources on GitHub. I'm still trying to get everything of mine over to GitHub at the moment. I unfortunately have a full time job so I don't have a ton of free time. The weekends are usually the only free time I have. I overslept today and decided to play hookey for the rest of the day. LOL. Imma bad bad boy LMAO.
When I get settled in to GitHub and have a chance to really check out the source code, I'll then see what I can do.
Click to expand...
Click to collapse
Hey bro well i found your repo i was wondering are you going to set it up to where their will be your own device tree kernel etc? I also have d415 and would like to use this as a base and see what i can do to help get some things working/test and share.
I have built from the most recent source via Quarx repo however it still has all the issues with wifi, gps, and camera some of which you have gotten to work, may I ask what you altered to get those working?
toxinburn said:
Hey bro well i found your repo i was wondering are you going to set it up to where their will be your own device tree kernel etc? I also have d415 and would like to use this as a base and see what i can do to help get some things working/test and share.
Click to expand...
Click to collapse
Eventually. Don't fork anything yet. I've gotta change a few things at github.
Sent from my LG-D415 using Tapatalk
shinobisoft said:
Eventually. Don't fork anything yet. I've gotta change a few things at github.
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
heheh of course i already did but no worries.
thanks! This is so much faster than stock ROM. Stock ROM used to redraw UI every time i stay in an app for a bit.
toxinburn said:
... may I ask what you altered to get those working?
Click to expand...
Click to collapse
Sure ,you can ask but I'll never tell. LOL. Just kidding.
It's actually kinda long winded tho and I'm not sure I can explain exactly what needs to be done. It will be easier for me to fix my GitHub and have you fork from it than to explain everything in enough detail to understand what needs to be done.
I'm just getting in from work. Hopefully I can have my GitHub repaired in the next couple hours
Just want to say thanks to you (for the D415 version) as well as Quarx for supporting this phone! I must say this L90, even with the stock ROM, was the best $50 I ever spent. I am still discovering features on this phone that I had no idea were even on here, such as NFC, infrared remote, and even the flashlight (yeah, I really thought this didn't have a camera flash until I launched the Torch app). But now to see this phone with CM11 just makes it that much better of a deal. Other than the front camera currently not working, which is fine for me since I never use it anyway, this ROM is absolutely fantastic and is twice as fast as the stock LG ROM.
Keep up the good development work! If you have any experimental ROMs, kernels, or any other mods, please let me know and I will be happy to test them. This is a great little phone for the price tag, and I'd love to see the development blossom for this thing.
Sent from my LG-D415 using XDA Free mobile app
1) Happy Birthday to me :silly:
2) I'm doing a test build now to see if I managed to fix what I broke last night. LOL
3) If #2 is successful, then I'll upload my kernel sources to GitHub for those who are interested. Then I'll also post a link in the OP to my GitHub for CM11.
Cross y'alls fingers and toes! No eyes please!!! LMAO...
shinobisoft said:
1) Happy Birthday to me :silly:
2) I'm doing a test build now to see if I managed to fix what I broke last night. LOL
3) If #2 is successful, then I'll upload my kernel sources to GitHub for those who are interested. Then I'll also post a link in the OP to my GitHub for CM11.
Cross y'alls fingers and toes! No eyes please!!! LMAO...
Click to expand...
Click to collapse
happy birthday !!!!have a great day!!!
shinobisoft said:
1) Happy Birthday to me :silly:
2) I'm doing a test build now to see if I managed to fix what I broke last night. LOL
3) If #2 is successful, then I'll upload my kernel sources to GitHub for those who are interested. Then I'll also post a link in the OP to my GitHub for CM11.
Cross y'alls fingers and toes! No eyes please!!! LMAO...
Click to expand...
Click to collapse
Sorry for OT
HAPPY B-DAY !!!! stay healthy
Ok. I got it to build. It flashes and boots just fine. But... I'm having one heck of a time pushing my kernel sources to GitHub.
The kernel sources are where most of the changes/additions I've made are. Without them the rest of the project is useless. LOL. I'm not sure if the issue is my wifi adapter or the wifi router I'm connected to but I keep getting kicked off during an upload. Sometimes I can get it to resume but never long enough got it to complete the upload. Grrrr...
All sources are now on GitHub. Source links are in post #3
EDIT::
New build up. See post #2
To my brothers (you know who you are)
Long, long ago...
A small pet dinosaur was left, abandoned and alone. His keepers, it seemed, had more interest in newer, more capable pets. But he eventually met with other dinosaurs, also abandoned, and a man named hephappy...
STATUS: NOT BOOTING
JENKINS SHUT DOWN
NO DOWNLOADS
The purpose of this thread is two-fold, I think. It is meant to be a venue for androidarmv6 (team) ,as most of their development is done off- site. It is also meant to be a place for hard core dinosaur lovers to test this work, and add to it as development proceeds. As androidarmv6 has brought us, the p500 community, through to working CM- 11, now we will start a new chapter, namely CM- 12. At the time of this posting, there have been several successful builds for the p500. But none are successfully booting, as yet.
I can't stress enough that most of this work is experimental, as the newer source code is being adapted to work on these devices. So unless you are okay with a possibly bricked (unusable) phone, don't flash any of these ROMs. Also, I do not have any responsibility or liability in the case that you should damage your phone by flashing any of this firmware. Also, your warranty will be voided. And I do not represent, and am not affiliated with androidarmv6. That said... YOU HAVE BEEN WARNED.
Website:
http://androidarmv6.github.io/
Source code:
https://github.com/androidarmv6
You can watch development as it progresses, or you can sign in and participate here:
http://review.androidarmv6.org/#/q/status:merged
STATUS: NOT BOOTING
JENKINS SHUT DOWN
NO DOWNLOADS
sent from my towelrooted LG L34C using daishi4u bumped twrp 2.8.3.0 and bumped key-boot-recovery kernel
...as he looked back on the sleeping giants, exhausted from their long journey, the wizard Androidmeda new that he had taught them all that he could, and they had all that they needed. But he also knew that they would never be able to survive crossing the mountains into the new land. Only their child would be able...
Well I guess this is it my brothers. Seems that all has been tried, and CM-12 will not be released for armv6 devices. But many thanks to our devs for trying. It's been a long run. Amazing, just amazing.
ibub said:
To my brothers (you know who you are)
Long, long ago...
A small pet dinosaur was left, abandoned and alone. His keepers, it seemed, had more interest in newer, more capable pets. But he eventually met with other dinosaurs, also abandoned, and a man named hephappy...
The purpose of this thread is two-fold, I think. It is meant to be a venue for androidarmv6 (team) ,as most of their development is done off- site. It is also meant to be a place for hard core dinosaur lovers to test this work, and add to it as development proceeds. As androidarmv6 has brought us, the p500 community, through to working CM- 11, now we will start a new chapter, namely CM- 12. At the time of this posting, there have been several successful builds for the p500. But none are successfully booting, as yet.
I can't stress enough that most of this work is experimental, as the newer source code is being adapted to work on these devices. So unless you are okay with a possibly bricked (unusable) phone, don't flash any of these ROMs. Also, I do not have any responsibility or liability in the case that you should damage your phone by flashing any of this firmware. Also, your warranty will be voided. And I do not represent, and am not affiliated with androidarmv6. That said... YOU HAVE BEEN WARNED.
Source code:
https://github.com/androidarmv6
ROMs:
http://jenkins.androidarmv6.org
sent from my towelrooted LG L34C using tapatalk
Click to expand...
Click to collapse
Congrats! Nice preface wording, bro! :good:
Great! and thanks.
I have not been using cm-11. Omni runs better and seems!! to have fewer bugs. Problem with cm is that when newer comes along, older bugs are left there. I guess we all prefer to play with the latest and greatest so not really complaining. My real problem with cm-11 is the special recoveries needed for it.
I would like to try cm-12 builds, but want to be able to get back to the omnirom. How do I get around the recovery changes (would be nice to have a cwm or twrp that asks on bootup: Want TSL? Switch system and data? But for now, I do not want to lose my alternatives or brick the phone.
How to proceed?
BTW: Link points to end-user builds (cm-11). We'll get there.
Dovidhalevi said:
Great! and thanks.
I have not been using cm-11. Omni runs better and seems!! to have fewer bugs. Problem with cm is that when newer comes along, older bugs are left there. I guess we all prefer to play with the latest and greatest so not really complaining. My real problem with cm-11 is the special recoveries needed for it.
I would like to try cm-12 builds, but want to be able to get back to the omnirom. How do I get around the recovery changes (would be nice to have a cwm or twrp that asks on bootup: Want TSL? Switch system and data? But for now, I do not want to lose my alternatives or brick the phone.
How to proceed?
BTW: Link points to end-user builds (cm-11). We'll get there.
Click to expand...
Click to collapse
Thanks, link updated to View/All.
sent from my towelrooted LG L34C using tapatalk
This is great @ibub !
Thanks for taking the initiative of building CM12 for this device, which never seems to grow old.....
The androidarmv6 team is just awesome! Keep up the gr8 work! It's always appreciated!
Waiting for it to boot for now...
D3oDex3D_AyusH said:
This is great @ibub !
Thanks for taking the initiative of building CM12 for this device, which never seems to grow old.....
The androidarmv6 team is just awesome! Keep up the gr8 work! It's always appreciated!
Waiting for it to boot for now...
Click to expand...
Click to collapse
Just to be clear, this is not my work. Androidarmv6 team (mainly androidmeda for p500) compiles these ROMs. Thanks belong to them (him).
sent from my towelrooted LG L34C using tapatalk
Wut? ART isn't compatible with ARMv6, AFAIK.
Casserole said:
Wut? ART isn't compatible with ARMv6, AFAIK.
Click to expand...
Click to collapse
We shall soon see.
sent from my towelrooted LG L34C using tapatalk
CyanogenMod announces official CM12 Nightlies!
http://phandroid.com/2015/01/05/cyanogenmod-cm12-nightlies/
Do not even expect P500 on the list!
EDIT:
CyanogenMod 12 nightlies now available for 31 devices, based on Android 5.0.1 Lollipop (LRX22C). LG Optimus One is out of the list to be sure
http://blog.gsmarena.com/cyanogenmo...able-31-devices-based-android-5-0-1-lollipop/
While in other hand, our devs are working to port experimentally newer version of CM12 (Android 5.0.2 LRX22G) on armv6 obsolete devices, though! :good:
You can look at development of android_art as it progresses here:
http://review.androidarmv6.org/#/q/status:merged
and here:
http://review.androidarmv6.org/#/c/7676/
Who dares (try this on p500) win!
http://jenkins.androidarmv6.org/view/Developers/job/cm-experimental/1308/
http://jenkins.androidarmv6.org/vie.../archive/cm-12-20150108-EXPERIMENTAL-p500.zip
Sent from my HM 1SW using XDA Free mobile app
xu3sno said:
Who dares (try this on p500) win!
http://jenkins.androidarmv6.org/view/Developers/job/cm-experimental/1308/
http://jenkins.androidarmv6.org/vie.../archive/cm-12-20150108-EXPERIMENTAL-p500.zip
Sent from my HM 1SW using XDA Free mobile app
Click to expand...
Click to collapse
Trimmed>>Flashed>>Stuck at CM bootlogo
CCXAlex said:
Trimmed>>Flashed>>Stuck at CM bootlogo
Click to expand...
Click to collapse
+1K
GERRIT_CHANGES: 7676 7748 7693 7651 7751 7792
Code:
7676: * runtime : make entrypoints ARM; if the target arch is lower than
armv7, set armv6.
* compiler: add a new define: ARM_MODE_WORKAROUND, enable it if
the target cpu is arm11. Use ARM assembler and replace
Thumb{1-2} opcodes with ARM ones. Update some code to
support new opcodes
NOTE: kArm is not implemented, probably it use to work only in
portable mode.
7748: Compatibility work around for bad graphics driver dependency
7693: legacy OMX: squashed commit for legacy OMX support for LP
7651: Revert "Revert "Turn on BLE, GATT, and SMP of Bluetooth stack""
7751: msm7x27-common: Initial cm-12 bringup
7792: jemalloc: Force gcc for atomic functions
GCC built-in functions provide advanced things like prefetch, expected, synchronization...
Bootloog attached.
It seems bootloop's culprit is regarding with dynamic shared libraries (lib*.so) which must be fixed first.
It does not work on any device arvm6.
Link
A reminder: unannounced experimental builds that you may see on Jenkins are made by and for developers alone, and are definitely not suitable to be flashed by users. The cm12 totoro build from today doesn't install or boot, and I expect many future builds will be the same, so don't waste your time with it.
Also, a reminder of some things you shouldn't do (now or ever): don't ask for ETAs, don't spam the dev thread, and don't PM me asking for information that isn't on a public post.
There are many things that need to be fixed for armv6 devices. I've sorted out the major issues specific to Broadcom hardware, but there are more important issues that need solving for ARMv6 devices in general that are being working on by several people (assembly errors, ART compatibility, build system integration, etc.). It's going to take time. Thanks for your understanding.
Click to expand...
Click to collapse
Build cm_p500-userdebug-cm-12.0 (Jan 11, 2015 9:45:30 PM)
Androidmeda built it for testing via Jenkins, if you dare to waste your time!
http://jenkins.androidarmv6.org/view/Developers/job/cm-experimental/1311/
ROM: http://jenkins.androidarmv6.org/vie.../archive/cm-12-20150111-EXPERIMENTAL-p500.zip
xu3sno said:
Build cm_p500-userdebug-cm-12.0 (Jan 11, 2015 9:45:30 PM)
Androidmeda built it for testing via Jenkins, if you dare to waste your time!
http://jenkins.androidarmv6.org/view/Developers/job/cm-experimental/1311/
ROM: http://jenkins.androidarmv6.org/vie.../archive/cm-12-20150111-EXPERIMENTAL-p500.zip
Click to expand...
Click to collapse
If it works on s5360 it will also work on the P500. But this time it does not work perfectly on any device armv6. I will follow up if it worked on my s5360 will report over here.
Thanks for the update by @xu3sno
Any PlayStore said:
If it works on s5360 it will also work on the P500. But this time it does not work perfectly on any device armv6. I will follow up if it worked on my s5360 will report over here.
Thanks for the update by @xu3sno
Click to expand...
Click to collapse
@Any PlayStore
also @CCXAlex (may be you have luck to try it, but I doubt )
Even Any PlayStore has quoted previously, just to satisfy my curiosity, insisted to install cm12-20150111_EXPERIMENTAL-p500.
Trimmed > clean installed > rebooted > boot loop As previous attempt, it seems lib*.so need to be fixed (?)
Don't know it's wasting my time or not
Quote:
A reminder: unannounced experimental builds that you may see on Jenkins are made by and for developers alone, and are definitely not suitable to be flashed by users. The cm12 totoro build from today doesn't install or boot, and I expect many future builds will be the same, so don't waste your time with it.
Click to expand...
Click to collapse
Yes, yes, we know or should know. But, hey, who does not want to be the first to see this play? The only reason I am staying off is because of the CM tricks with switching system and data partitions meaning recoveries are not compatible.
Anyway, diehards within the CM universe, once in that bootloop if ART had indeed done its thing, check remaining system space and contents of those /system/app/... folders. My (un-) educated guess is that this may become the big problem.
xu3sno said:
@Any PlayStore
also @CCXAlex (may be you have luck to try it, but I doubt )
Even Any PlayStore has quoted previously, just to satisfy my curiosity, insisted to install cm12-20150111_EXPERIMENTAL-p500.
Trimmed > clean installed > rebooted > boot loop As previous attempt, it seems lib*.so need to be fixed (?)
Don't know it's wasting my time or not
Click to expand...
Click to collapse
I also attempted to install this. Initially my trimming method seems to have broken update binary, so flash failed. Next installed full ROM (/system =189MB) using @HardLight twrp 2.7.0.0 TLS (successfully flashed). Stuck at boot animation. No log (flashing while driving).
sent from my towelrooted LG L34C using tapatalk
Hey guys
In memory of a very dear friend who passed away yesterday, I am starting this thread and a new era for our x3.
CM has pushed their CM13 branches yesterday, which means it's time for a new project. This time, though, I will be all by myself.
Please do not expect any miracles soon, as the M sources still need to settle a bit before we can even hope for a halfway working build.
Once again, you have several ways to get in touch with me/us:
You can use this thread (but keep it development related)
We have our own IRC channel on freenode, called #p880-dev
Use our github site
PM (even though the other ways are preferable)
We are of course still open source, and you can find the repos on our github:
Device tree
Kernel
Blobs
Any help is greatly appreciated, be it pre-alpha testing, or helping with actual development and fixing bugs. Feel free to make a pull request on github, which we will most likely merge happily. If you're not that experienced in git, feel free to contact me about it.
If you want to use this sources/ROM as your base, you sure are allowed to, but please let me/us know about it before you release it and give proper credits.
That's all we're asking for.
I know you want to know the actual Status, so I try to always keep it updated in this OP:
Not working:
Most likely everything
Working:
Most likely nothing
Now, the most important part:
If you like our work and all the time we spent in order to get it working, feel free to buy us a coke/beer/whatever by donating a litte bit
Special thanks go to: (names in no particular order)
@Daniel Kng
@fritzcola
@sunsettrack4
@thegrim11
@LGaljo
@alfsamsung
@Adam77Root
kingf1 from IRC
And last but not least, please keep this thread on topic! All OT posts will be deleted without further warnings!
XDA:DevDB Information
[DEV] [WIP] Unofficial CM13 for the p880, ROM for the LG Optimus 4X HD
Contributors
laufersteppenwolf
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-10-06
Last Updated 2015-10-06
Reserved
A quick update, CM's sources are still not compilable as they are still working on the initial bringup.
I will stay on it and see what I can do
I will pay you, just please make final ROM for 4X, with everything working as it shoud be! That would be awesome!
Wysłane z mojego LG-P880 przy użyciu Tapatalka
I will pay you too. I would like when I will be to have the final ROM fo 4x. Thanks
Make it working relibly and responsively, and I will pay you too. You deserve it!
I don't mind if it takes months to achieve it. Just make it at some point, and I'll be happy!
Can't wait !!!
ps. i'm sorry for your friend
laufersteppenwolf said:
A quick update, CM's sources are still not compilable as they are still working on the initial bringup.
I will stay on it and see what I can do
Click to expand...
Click to collapse
I'm also waiting for complete bringup tried for daily driver... failed. If you need help just send me message on hangouts/mail
@laufersteppenwolf, I was hoping you could give insight regarding this current dilemma seen with CM13. http://pastebin.com/vHMRMS0E
Feel free to PM me or reach out on here. Wanting to know if you were successful getting past the problem and if so what was your solution. Your time and consideration is appreciated.
SHM said:
@laufersteppenwolf, I was hoping you could give insight regarding this current dilemma seen with CM13. http://pastebin.com/vHMRMS0E
Feel free to PM me or reach out on here. Wanting to know if you were successful getting past the problem and if so what was your solution. Your time and consideration is appreciated.
Click to expand...
Click to collapse
that's a CM issue and needs their fixing. Hence I did not look into it, because if I go on do my "fix" it will most likely differ from CM's fix and may then cause some later issues.
So I'm currently waiting for CM to fix it
Some days ago is builded a cm13 ZIP, but it doesnt even pass bootloader.
Here are my commits for device tree. I disabled most likely everthong what causes building errors like Audio and CameraWrapper.
Here are my commits https://github.com/lenzwagner/android_device_lge_p880/commits/cm-13.0
@laufersteppenwolf will be on IRC the next evenings. Hope you'll be there too.
---------- Post added at 07:45 PM ---------- Previous post was at 07:40 PM ----------
laufersteppenwolf said:
that's a CM issue and needs their fixing. Hence I did not look into it, because if I go on do my "fix" it will most likely differ from CM's fix and may then cause some later issues.
So I'm currently waiting for CM to fix it
Click to expand...
Click to collapse
They fixed it some days ago.
Look here:
1. http://review.cyanogenmod.org/114239
2. http://review.cyanogenmod.org/114277
3. http://review.cyanogenmod.org/112338
I already fixed the device tree quite some time ago without disabling it, will have to look into it another time as I have to fix my mom's lappy first...
laufersteppenwolf said:
I already fixed the device tree quite some time ago without disabling it, will have to look into it another time as I have to fix my mom's lappy first...
Click to expand...
Click to collapse
If you find time, i'm on IRC atm
@fritzcola, just got home from work, gonna check out those commits now. Thanks for posting them. ffmpeg has been a pain for me this past week trying to compile CM13 :-/. Gotta love a fresh brunch out the kitchen lol.
edit: eh, those commits have already been merged so problem still persists.
Sent from my Ascend Mate 2 using Tapatalk
SHM said:
@fritzcola, just got home from work, gonna check out those commits now. Thanks for posting them. ffmpeg has been a pain for me this past week trying to compile CM13 :-/. Gotta love a fresh brunch out the kitchen lol.
Sent from my Ascend Mate 2 using Tapatalk
Click to expand...
Click to collapse
Just run "make clean" and "repo sync". Commits are already merged in source apart from one.
@laufersteppenwolf Can you upload the fixes to a " cm-13.0" branch?
And do you already go further than BL?
fritzcola said:
Just run "make clean" and "repo sync". Commits are already merged in source apart from one.
@laufersteppenwolf Can you upload the fixes to a " cm-13.0" branch?
And do you already go further than BL?
Click to expand...
Click to collapse
Yea, just verified I already have them in the source. Stagefright still being an issue. Need to look at gerrit and see if there is a commit on standby that may resolve my problem. codecs_utils.cpp fails to compile over at external/stagefright-plugins/utils/.
SHM said:
Yea, just verified I already have them in the source. Stagefright still being an issue. Need to look at gerrit and see if there is a commit on standby that may resolve my problem. codecs_utils.cpp fails to compile over at external/stagefright-plugins/utils/.
Click to expand...
Click to collapse
Weird cause i just compiled a build with no errors.
fritzcola said:
Weird cause i just compiled a build with no errors.
Click to expand...
Click to collapse
I got passed it finally. Seemed it was just a fluke with no explanation. Got to deal with this problem now. Take note of line 232 specifically. Haven't had time to mess with it yet.
Sent from my Ascend Mate 2 using Tapatalk
SHM said:
I got passed it finally. Seemed it was just a fluke with no explanation. Got to deal with this problem now. Take note of line 232 specifically. Haven't had time to mess with it yet.
Sent from my Ascend Mate 2 using Tapatalk
Click to expand...
Click to collapse
Are you sure you're building for P880!? MSM8974 is Snapdragon stuff
fritzcola said:
Are you sure you're building for P880!? MSM8974 is Snapdragon stuff
Click to expand...
Click to collapse
No sir I am not. For another device, forgive me if that caused any confusion. My initial post on here was with regards to ffmpeg. A hunt for an unofficial build on xda brought up a few links and so wanted to make contact with the dev(s) to see if they had the same problem and/or fix so I may compare and possibly adapt if applicable my previous outcome. As for my current issue I do not expect any answer or results from here since its completely off topic from this device. I merely shared it in response with no intention or expectations for a solution. . I did take a look at your repo and saw ffmpeg is obsolete so I removed it from my tree as well since it was most definitely causing my builds to break.
Hi, I'll try to keep it short, between yesterday and today, I have been researching CM13, I thought it was a really hard project, but the results look promising so far, I am not ready to release anything at the moment, but I'll let you see some screenshots. This is just a side project, and I'll keep working on AOSP. I'll update this post whenever I feel like the ROM is kind of finished.
PS: This is Android 6.0.1, EMUI is just on 6.0.0 Isn't that exciting?
http://imgur.com/a/kbybk
See you!
PS2: No PMs about this please, you'll have it as soon as it's finished
CM 13 For HUAWEI P8 Lite?
I solve art/runtime error
wow this is great,i wish you all the best in these projects !
When will be this finished? I can't wait!??❤
Sent from my ALE-L21 using XDA-Developers mobile app
just wondering something, how much space uses system from CM13 and AOSP? for example, on stock Huawei roms almost always they use 2GB+
EDIT: and anyways im asking because, i use Honor 4X/Gplay, and its the same phone that the P8 lite, except internal storage, so that's why im wondering, anyways i think i used your AOSP, that had some bugs like no signal, no wifi, etc (im not sure if you made it), the thing is that rom worked it in my phone too lol
You're just awesome dude! We are all very excited about this project. This is just awesome!
Finally someone who is making ROMs for this phone (and unlike someone doesn't say he'll delete everything "because of noobs")
Sent from my ALE-L21 using XDA-Developers mobile app
Sounds great! If you want someone who can help you testing, i can do that!
Yay, i bought p8lite 2 days ago and i love it!
Great work btw
dude this is awesome !!! so there is no more ril problem this is just great thank you very much !!!!
Hi @XePeleato first of all Good Job and second as i can see into the screenshots the RIL problem is persistent or you didn't insert the SIM . I'm following your work on github if u need someone who test the ROM call me
Spineshankumb said:
Hi @XePeleato first of all Good Job and second as i can see into the screenshots the RIL problem is persistent or you didn't insert the SIM . I'm following your work on github if u need someone who test the ROM call me
Click to expand...
Click to collapse
Hi, The SIM is there, the thing is that I need to patch the framework in order to include the Huawei Java classes that enable the RIL stack. I'll release a testing version soon, since I want to include things to test, it wouldn't make sense to upload a rom with 1 or 2 features working, there would be nothing to test
XePeleato said:
Hi, The SIM is there, the thing is that I need to patch the framework in order to include the Huawei Java classes that enable the RIL stack. I'll release a testing version soon, since I want to include things to test, it wouldn't make sense to upload a rom with 1 or 2 features working, there would be nothing to test
Click to expand...
Click to collapse
Sure! what about the camera? i think is not possible to port the Snap camera feature on HiSi
panchovix said:
just wondering something, how much space uses system from CM13 and AOSP? for example, on stock Huawei roms almost always they use 2GB+
EDIT: and anyways im asking because, i use Honor 4X/Gplay, and its the same phone that the P8 lite, except internal storage, so that's why im wondering, anyways i think i used your AOSP, that had some bugs like no signal, no wifi, etc (im not sure if you made it), the thing is that rom worked it in my phone too lol
Click to expand...
Click to collapse
Wifi worked fine on my 5.1 AOSP version, The system.img weighs roughly 800MB, I don't know exactly how much will it take, since CM13 didn't erase my internal storage.
NeedleGames said:
Finally someone who is making ROMs for this phone (and unlike someone doesn't say he'll delete everything "because of noobs")
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, sokkoban recieved a LOT of input about his roms, there were a lot of questions and stuff, it can get really annoying, these open source projects come "As is, without warranty of any kind" - quoting the GPL so actually, trying to give some decent support on this forums is really kind.
Spineshankumb said:
Sure! what about the camera? i think is not possible to port the Snap camera feature on HiSi
Click to expand...
Click to collapse
The Snap app is included, however since I haven't included the camera HAL yet, I don't know for sure if it will work.
--
I'll be off like a week or so, I have compiled my own kernel, with some CPU governors to try, and I have fixed the screen DPI so far, there's still some serious patching needed.
@XePeleato yeah it worked, but if im not mistaken, with static wifi, but interesting, if the system is 800MB i think i will be fine, thanks for all about this
This is just my mind. But i would be more happier if i got fully working cm13 marshmallow than aosp lollipop. If i was you. I would take cm as a primary mission. But do as you want. Aosp is great news too
Keep it up man!
Vika__ said:
This is just my mind. But i would be more happier if i got fully working cm13 marshmallow than aosp lollipop. If i was you. I would take cm as a primary mission. But do as you want. Aosp is great news too
Keep it up man!
Click to expand...
Click to collapse
Sure, your opinion matters. Luckily, if I apply a patch to CM, it's also valid on AOSP, the same applies for the kernel.
XePeleato said:
Hold on I said nothing about the RIL stack, I don't know if it will work or not, but that's the last thing I am going to try to fix since I don't know if I am going to be able to fix it at all.
Click to expand...
Click to collapse
holly crap I thought this problem is finally solved :/ , okey I hope it can be fixed then , good luck !!!
Great!If I port this for Honor 4C,will it work?Sorry for my bad English.
来自华为荣耀畅玩4C CHM-TL00H -天生急性子 Android 小楼阁