Hi there, guys.
I did a wide search in Google/XDA/whatever and didn't manage to find anything related to my problem, so I'm posting it here :good:
My S3 Mini (I8190N) runs flawless and quite smooth on NovaFusion/Maclaw 20140524. Using Gravity Box for enabling navbar (since the I8190N loses its capacitive buttons when changes the kernel) did the trick and fully usable...
Except for one little BIG bug: everytime I receive a notification (Whatsapp, Gmail, FB, SMS, calls, doesn't matter which app) while the screen is off, it reboots. Every. Single. Notification. Cause of this, my battery lasts just a couple of hours, since is rebooting non stop, and I lose a lot of important things (calls, alarms, SMS, you name it)
I tried some things:
- Installing today's NovaFusion release (didn't solved);
- Clean installing 20140524 again (nope) and clean installing today's release (nope again);
- Removing Xposed and Gravity Box (I thought it could be some incompatibility, but nope);
- Disabling lockscreen (to test if the problem was with lockscreen itself, but no).
Following the logic, it appears to be something related to notifications waking up the screen (the phone even vibrates a little before restarting again), but I didn't find any configuration related to this.
So please, anyone? Any advices? Any solutions? This issue is getting me heads off
Strange bug indeed and i have no idea why. The vibration on boot is always there to tell that bootloader boots. Its easier to troubleshoot a black phone that way, according to the service manual.
Sent through time and space from my s3mini/CM11
Jucarez said:
Hi there, guys.
I did a wide search in Google/XDA/whatever and didn't manage to find anything related to my problem, so I'm posting it here :good:
My S3 Mini (I8190N) runs flawless and quite smooth on NovaFusion/Maclaw 20140524. Using Gravity Box for enabling navbar (since the I8190N loses its capacitive buttons when changes the kernel) did the trick and fully usable...
Except for one little BIG bug: everytime I receive a notification (Whatsapp, Gmail, FB, SMS, calls, doesn't matter which app) while the screen is off, it reboots. Every. Single. Notification. Cause of this, my battery lasts just a couple of hours, since is rebooting non stop, and I lose a lot of important things (calls, alarms, SMS, you name it)
I tried some things:
- Installing today's NovaFusion release (didn't solved);
- Clean installing 20140524 again (nope) and clean installing today's release (nope again);
- Removing Xposed and Gravity Box (I thought it could be some incompatibility, but nope);
- Disabling lockscreen (to test if the problem was with lockscreen itself, but no).
Following the logic, it appears to be something related to notifications waking up the screen (the phone even vibrates a little before restarting again), but I didn't find any configuration related to this.
So please, anyone? Any advices? Any solutions? This issue is getting me heads off
Click to expand...
Click to collapse
Since there seem to be issues with the capacitive button lights on your device, I would assume that the problem is with BLN (Back light notification) which activate the capacitive button backlights when you receive a notification and the screen is off.
I would suggest that you check to see if BLN is enabled and disable it. There is a BLN Control App in the Play store :good:
Meticulus said:
Since there seem to be issues with the capacitive button lights on your device, I would assume that the problem is with BLN (Back light notification) which activate the capacitive button backlights when you receive a notification and the screen is off.
I would suggest that you check to see if BLN is enabled and disable it. There is a BLN Control App in the Play store :good:
Click to expand...
Click to collapse
This makes a HUGE sense! :victory:
(still weird, tho, that only the I8190N loses its capacitive buttons on new kernel, but not entering this discussion haha)
Will try this, @Meticulus. Thanks in advance
Download Disable_BLN.zip and flash in recovery. See if it works. My backlight are always off with this flashed.
https://app.box.com/s/ybzhlojc807u8srw8lep
Sent through time and space from my s3mini/CM11
i have the i8190 and have the same problems
So I'm using Carbon and Slimkat, works perfectly fine
Jucarez said:
This makes a HUGE sense! :victory:
(still weird, tho, that only the I8190N loses its capacitive buttons on new kernel, but not entering this discussion haha)
Will try this, @Meticulus. Thanks in advance
Click to expand...
Click to collapse
Did you try it ?
tys0n said:
Download Disable_BLN.zip and flash in recovery. See if it works. My backlight are always off with this flashed.
https://app.box.com/s/ybzhlojc807u8srw8lep
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
Thank you! Now it works perfectly fine Finally found the solution after few months, thank you!
Hi guys,
I tried it. It's working perfectly. Hallelujah!
Now I'm discovering the Xposed to do a lot of other things (autohide the navbar, disable the "3-dot" button on apps, etc)
Thank you very much!
down
tys0n said:
Download Disable_BLN.zip and flash in recovery. See if it works. My backlight are always off with this flashed.
https://app.box.com/s/ybzhlojc807u8srw8lep
Click to expand...
Click to collapse
LMH1998 said:
Thank you! Now it works perfectly fine Finally found the solution after few months, thank you!
Click to expand...
Click to collapse
Jucarez said:
I tried it. It's working perfectly. Hallelujah!
Click to expand...
Click to collapse
Unfortunately, the workaround "patch" is not available anymore :crying:
would it be possible to upload it again anywhere, maybe here?
or is there another possibility to fix that problem yet?
Related
I've been using Martin Börjesson's LED Notifications app for a while and you can now find it on the market!
"LG O2X Touch LED Notifications"
By Martin Börjesson
I found it's light on battery. And you can simply disable the notification part if you just want to recall the setting of touch LED brightness after reboot. It's free
I can't make it work with cyanogen nighlty :/
Pierrot94200 said:
I can't make it work with cyanogen nighlty :/
Click to expand...
Click to collapse
hmm..I can.
do i need to set any monitor app if i want it notice the miss call? if so, which?
Can't make it work with DocSlim
I tested all settings, i changed parameters in Accessibility, nothing happens...
Have you tried a reboot (though mine worked fine without on cm. Weird..)
Very nice, works on the G2x as well, with cm7
it works on su660 (korean version of o2X) too. thanks for good information.
Yep !
I've been using it since version 0.2 and it works really good. I just installed last version from market.
To emprize : no you don't need any app monitor for missed call. It's one of the 3 basics (Gmail, SMS/MMS, Missed call). Look into "notification" if "Missed call" is checked (should be by default).
lpn- said:
Yep !
I've been using it since version 0.2 and it works really good. I just installed last version from market.
To emprize : no you don't need any app monitor for missed call. It's one of the 3 basics (Gmail, SMS/MMS, Missed call). Look into "notification" if "Missed call" is checked (should be by default).
Click to expand...
Click to collapse
thx mate! how come i cant see the "missed call", lol
What about battery drain?
-=Beavis=- said:
What about battery drain?
Click to expand...
Click to collapse
I haven't noticed any as of yet but the way the program is set-up, it could be a battery guzzler. This app loops check for notifications as opposed to being built into the framework
jlevy73 said:
I haven't noticed any as of yet but the way the program is set-up, it could be a battery guzzler. This app loops check for notifications as opposed to being built into the framework
Click to expand...
Click to collapse
Thanks for the reply. I think I'll just try it myself!
If anyone of you notices a serious battery drain I'd appreciate a post
anybody know what's the accelerometer tolerance for? i don't quite get it.
Sent from my LG-P990 using XDA App
problems is that as soon as you have a notification, your phone will not go to sleep. And then will drain battery until you check your phone
Yea that's what I mean but you didn't notice a serious drain because of that?
Just to be sure, the screen remains off and the buttons glow it is simply that the phone doesn't go into "sleep" mode (what somehow makes sense)?!
Did some testing
And my sleeping phone (no notification) consume 2-3% an hour
With the notification glowing (meaning no sleep) for an hour, I loose 10%
The phone does sleep, the app has zero wakelock according to spare parts.
well, the leds are still blinking, from what I know (I still may be wrong there's no LG routine for the blinking. It does mean it's done by the "LG O2X Touch LED Notifications" so no sleep...
well this is what I'm guessing, since we do not have the source code
Just cos an app does something doesn't mean it has to keep the phone awake to do it
As poeple keep aksing the same questions over and over again in the official CM10 thread I tought it might be a good idea to have a dedicated bug thread. I will try to maintain the first post as good as possible. It should give you an overview of bugs and workarounds.
Following are known bugs with workarounds:
Slow charging bug
Restart phone with cable pluged
Battery drain on wifi
In advanced settings of WLAN don't choose the option to keep activated always the wifi
Apollo chrashes
Clear cache and data of appollo app in "manage apps" menu
Noise during Call, muted mic
Use a CM Rom for the new bootloader
Following are known bugs withouth workarounds:
Voice/Video call in Gtalk doesn't work (FC)
Panoramic photo mode chrashes somtimes
only continuous autofocus in videocam
notification bar isnt able to be tranparent, even with themes
no CRT on/off animation
non selectable pieces in enrgy-switch-widget
Bluetooth is loosing connection
Camera flash does not work without tapping-to-focus before hitting the shutter
No face unlock
HDMI output is rotated by 90 degree
Fixed Bugs
Screen turning randomly turning on (CM 1105)
Headset button works. This concerns those who use a proper Android headset that has a button for answering calls and pausing music. (CM 1105)
Other things to know
No LED Notification. This is actually not a bug. It is a feature which is not implemented yet.
Voice/Video call in Gtalk doesn't work (Gtalk gets FC'ed).
There is already a post maintained in another thread (can't tell which one) with an exhaustive list of known bugs, but I've only got these (as far as I know), gtalk and no audio in call.
screen randomly turning on. happens much more with wifi on, like constantly, but now i changed to 1105 nightly, so ill see if this is gone or not.
every time after rebooting phone resets «vibration + sound»... after reboot: only sound (no*vibration)
kukharski said:
every time after rebooting phone resets «vibration + sound»... after reboot: only sound (no*vibration)
Click to expand...
Click to collapse
Can't confirm this bug. I still have vibration after reboot.
After 1day of use (and a full charge), microphone didn't work need to reboot
(1104)
(NOT solve in 1106)
The Parnoramic photo mod can't save picture
(1104 + CWM 6.0.12)
Datetime zone (solve in 1106)
aze2 said:
After 1day of use (and a full charge), microphone didn't work need to reboot
(1104)
The Parnoramic photo mod can't save picture (sdcard problem?)
(1104 + CWM 6.0.12)
Click to expand...
Click to collapse
I don't think it's a sdcard problem as I do not have any issues with the sdcard. Sometimes I am able to shoot Panorama fotos. Somtimes I am not.
charged all night. woke @ 75%. bad =/
1. only continuous autofocus in videocam
2. notification bar isnt able to be tranparent, even with themes
3. no CRT on/off animation!
4. non selectable pieces in enrgy-switch-widget
R0B3RTF1SH3R said:
charged all night. woke @ 75%. bad =/
Click to expand...
Click to collapse
What did you have on?
If you left it with wifi on it kinda makes sense it charged really slowly... if you believe that wifi is that enormous battery drainer everyone says it is (since I flashed v30a BB I have a battery life very similar to what I had with CM7, which was pretty good).
Flash light in photo camera is not working for me even when set to flash on.
With other camera apps it works. Can someone confirm?
My phone having randomly BSOD's.
Phone won't wake after sleep, have to take out battery. I have noticed some others have reported this in CM10 thread..
Bluetooth often does not connect to my car handsfree right away and often I have to turn BT off then on again on the phone to connect.
Bluetooth calling often gets cut off mid-call or briefly interrupted by waterfall noises.
Camera flash does not work without tapping-to-focus before hitting the shutter. Also the viewfinder lags a lot.
Whenever a new nightly is flashed on, it tends to disrupt the Bluetooth settings and force me to manually delete and repair.
The touch buttons don't light up during a notification when the screen is off (they used to in CM7).
Caller id, hidden number not functionnal in phone parameters / additionnals settings
Sent from my LG-P990 using xda app-developers app
Would help a lot if all of us shared the ROM version because some bugs are ROM related.
With 1107:
No face unlock
No full size panorama
Only continuous autofocus in videocam
Camera flash does not work without tapping-to-focus before hitting the shutter
Other bugs are not important to me so far.
Camera flash works for me,you need to turn that in options,works in cm and 4.2 camera
xilw3r said:
screen randomly turning on. happens much more with wifi on, like constantly, but now i changed to 1105 nightly, so ill see if this is gone or not.
Click to expand...
Click to collapse
got the same problem. Really annoying.
Only solution i found is this: http://forum.xda-developers.com/showthread.php?t=1674661
But i really don't want to do it, upgrading to the newest nightly and checking if the problem persists.
Edit: Updated it per CM-Updater (the one in "About the phone") and it's working great now, no random lightening up)
McKevin78 said:
Flash light in photo camera is not working for me even when set to flash on.
With other camera apps it works. Can someone confirm?
Click to expand...
Click to collapse
yes , same problem .. but after install Ucam pro flash is OK , and Ucam is much better :good: Try Ucam
help i cant restore a nandroid backup of cm10
it says error while restoring /system
any help??
Sent from my Optimus 2X using xda premium
With more than 10 installed Apps, that will open slow, need around 3 sec
RAM has space enough (80-100MB)
The Apps are working fine.
Otherwise no problems, Stop, the Akku Drain under WIFI:crying:
Hi,
I have an HTC One (m7) international version, and after 4.4 kitkat update, it slowly lost it's vibration and heptic feedback function until it completely stopped this weekend, even with power save mode turned off, and all the configurations properly set.
I've tried returning to my latest 4.3 jellybean nandroid backup from Dec-23, but the problem still ocurred.
After that, I've restored the 4.4 kitkat nandroid backup I've made this morning, and installed the "Vibrate Plus" app from the play store. After playing with it for a few minutes without any success, I've realized that the vibration function only works, with the phone screen facing down. As soon as I lift the phone from the table or turn it up in my hand, it stops vibrating.
If, instead of the "Pattern Vibration" function, I choose the "Simple Vibration", which keeps the phone vibrating constantly, I have a few seconds of vibration with the screen facing up, after lifting the phone from the table, until it stops working again.
---
I've found this single thread (URL = www (dot) htconeforum (dot) com /forum/htc-one-help/2341-vibrate-function-has-stopped-new-htc-one-m7.html) (can't post the URL here) where a guy has the same problem I have and had his phone replaced by HTC; but since Brazil does not have official HTC assistance, I probably am going to have it fixed myself, just as I did with my former HTC One X and it's GPS issue.
The problem is, I can't seem to find any other report from this same problem, other than this thread, and I also am having a hard time finding detailed instructions on how to open this phone for servicing, so, any help regarding any of these is really welcome.
Thank you very much, in advance.
tvidal said:
Hi,
I have an HTC One (m7) international version, and after 4.4 kitkat update, it slowly lost it's vibration and heptic feedback function until it completely stopped this weekend, even with power save mode turned off, and all the configurations properly set.
I've tried returning to my latest 4.3 jellybean nandroid backup from Dec-23, but the problem still ocurred.
After that, I've restored the 4.4 kitkat nandroid backup I've made this morning, and installed the "Vibrate Plus" app from the play store. After playing with it for a few minutes without any success, I've realized that the vibration function only works, with the phone screen facing down. As soon as I lift the phone from the table or turn it up in my hand, it stops vibrating.
If, instead of the "Pattern Vibration" function, I choose the "Simple Vibration", which keeps the phone vibrating constantly, I have a few seconds of vibration with the screen facing up, after lifting the phone from the table, until it stops working again.
---
I've found this single thread (URL = www (dot) htconeforum (dot) com /forum/htc-one-help/2341-vibrate-function-has-stopped-new-htc-one-m7.html) (can't post the URL here) where a guy has the same problem I have and had his phone replaced by HTC; but since Brazil does not have official HTC assistance, I probably am going to have it fixed myself, just as I did with my former HTC One X and it's GPS issue.
The problem is, I can't seem to find any other report from this same problem, other than this thread, and I also am having a hard time finding detailed instructions on how to open this phone for servicing, so, any help regarding any of these is really welcome.
Thank you very much, in advance.
Click to expand...
Click to collapse
Don't know why I pressed thanks button instead of quote. Ignore it..
Coming to the issue, did you the Trickster mod? You could set the vibration intensity there.. Install from Playstore.
Sent from my HTC One using xda app-developers app
Hi,
I've downloaded the trickster mod, and set up the vibration intensity to 3100 (max).
With this new setting, the problem seems to be fading away... yesterday, the vibration function failed to work only twice, and today, it has worked fine the entire day.
I cannot think of a reasonable explanation for this, I really tought it was a hardware problem, but it seems to be working a lot better now.
Thank you very much!!!
tvidal said:
Hi,
I've downloaded the trickster mod, and set up the vibration intensity to 3100 (max).
With this new setting, the problem seems to be fading away... yesterday, the vibration function failed to work only twice, and today, it has worked fine the entire day.
I cannot think of a reasonable explanation for this, I really tought it was a hardware problem, but it seems to be working a lot better now.
Thank you very much!!!
Click to expand...
Click to collapse
I guess it's still better to check with service center once, you never know it could be a hardware problem and you might get a replacement for this
Sent from my HTC One using xda app-developers app
tvidal said:
Hi,
I've downloaded the trickster mod, and set up the vibration intensity to 3100 (max).
With this new setting, the problem seems to be fading away... yesterday, the vibration function failed to work only twice, and today, it has worked fine the entire day.
I cannot think of a reasonable explanation for this, I really tought it was a hardware problem, but it seems to be working a lot better now.
Thank you very much!!!
Click to expand...
Click to collapse
Is it still working? Have the same problem here, but the trickster mod doesn't help!
kirbe1 said:
Is it still working? Have the same problem here, but the trickster mod doesn't help!
Click to expand...
Click to collapse
After the vibration issue was solved, the earpiece became mute at random times during calls so I gave up from KitKat... too much trouble, not so much attractive new features.
I'm back with ARHD 31.0, Jellybean 4.3... it's perfect.
This version works fine for me.
After all the problems I've had, I think I'll never try to update my phone again, unless there's some sort of "killer feature" in the new version.
Good luck!
HTC One Vibrate not work - List of Solutions Hardware and softwares
Hi all... I basically have two problems. First of all, I got the Z3C happily rooted... The problems are:
1- Tap2wake simply doesn't work, regardless of how I tap... fast, slow, super fast, thumb, index finger, etc... enable it/ disable it... same issue... refuses to work.
2- I use exDialer for my dialer... It works great (I've been using it for a couple of years)... the problem arises when I miss or reject a call. When this happens, Sony'x Phone apk (forgot the exact name) crashes. I have to acknowledge the notification of the crash and everything continues to work... strange ha?
Any ideas what can be going on? Thanks!
Carlos
Did you uninstall Xperia Home? That will cause the phone app to crash on calls as you describe.
I assume you have the option for tap to wake checked? Possibly you uninstalled something that it needs? Never ran into that particular issue.
Can't comment on issue #2, but T2W works flawless for me in 99.9% of the cases (with firmware .98).
Did you (now it might be too late) check whether both problems were there before you unlocked the BL?
What firmware version are you using?
Thanks.. Yeap. too late... already rooted...
Regarding #1, still doesn't work. Even after unfreezing Xperia home, which indeed fixes #2...
Thanks!!!
Carlos
so I've frozen some apps on the z3c, but I can't quite figure out which one controls the tap2wake function. I've tried the trial and error way (freeze/unfreeze), but can't narrow it down. Any of you have any ideas which apk controls that?
Thanks again!!
Carlos
Chaleman said:
so I've frozen some apps on the z3c, but I can't quite figure out which one controls the tap2wake function. I've tried the trial and error way (freeze/unfreeze), but can't narrow it down. Any of you have any ideas which apk controls that?
Thanks again!!
Carlos
Click to expand...
Click to collapse
You can just turn it off in Display settings.
Kev1000000 said:
You can just turn it off in Display settings.
Click to expand...
Click to collapse
Thanks Kev. What I ment to say is that I want to be able to ENABLE it... I have it ticked on, but since I froze some APKs, it's not working. I wish to know if anyone knows which one is it to unfreeze it (if that's the case). I've tried but I havent been able to figure it out.
Best regards,
Carlos
At some point after upgrading to Android 9 I started having the following issue where if the screen turns off due to inactivity and I turn it back on by pressing the power button, I see whatever screen I had open before it went to sleep but it's frozen. Scrolling touching etc still perform (invisible) actions but the screen is frozen until I either press the app switch button or perform some action that would change the current application. While the screen is frozen the drawer from the top works just fine. Also when the app that gets frozen is the desktop (I'm using the default launcher), I can see the background scrolling if I swipe left or right but the widgets don't change, they are frozen.
Does anyone else have the same problem? Any ideas what could be causing it?
Tritonio_GR said:
At some point after upgrading to Android 9 I started having the following issue where if the screen turns off due to inactivity and I turn it back on by pressing the power button, I see whatever screen I had open before it went to sleep but it's frozen. Scrolling touching etc still perform (invisible) actions but the screen is frozen until I either press the app switch button or perform some action that would change the current application. While the screen is frozen the drawer from the top works just fine. Also when the app that gets frozen is the desktop (I'm using the default launcher), I can see the background scrolling if I swipe left or right but the widgets don't change, they are frozen.
Does anyone else have the same problem? Any ideas what could be causing it?
Click to expand...
Click to collapse
FWIW I have not really solved the problem but I am circumventing it by having the screen lock immediately instead of waiting 5 minutes. That way I have to unlock with a fingerprint every time the screen is off, and unlocking refreshes the screen which "fixes" the problem.
Tritonio_GR said:
FWIW I have not really solved the problem but I am circumventing it by having the screen lock immediately instead of waiting 5 minutes. That way I have to unlock with a fingerprint every time the screen is off, and unlocking refreshes the screen which "fixes" the problem.
Click to expand...
Click to collapse
There were lot of reports of glitchy phones after the Pie update.
The cure was a factory reset or software repair with Xperia Companion
Use Xperia Transfer to back up your calls/contacts/texts before you reset the phone
Didgesteve said:
There were lot of reports of glitchy phones after the Pie update.
The cure was a factory reset
Click to expand...
Click to collapse
Can you please link a thread, where users told, that problem is solved after reset?
I have the same frozen display (since Android Pie), when turning display off and on again.
Don´t wish to reset and install all again, if that does not help.
bye,
Ralf
thegrobi said:
Can you please link a thread, where users told, that problem is solved after reset?
I have the same frozen display (since Android Pie), when turning display off and on again.
Don´t wish to reset and install all again, if that does not help.
bye,
Ralf
Click to expand...
Click to collapse
Hi Ralf,
the phone will always work better with a reset after a major update, all the Oreo applications are trying to work under Pie. Sometimes it works, sometimes it doesn't. Oreo apps aren't made to work under Pie and they can error.
here, is one example, or another, but I didn't jump to Pie because of all the negative feedback and the scores of people trying to downgrade.
A reset will fix your problem and if you use Xperia transfer then the amount of personal information lost will be minimal.
Thanks for the links.
Didgesteve said:
all the Oreo applications are trying to work under Pie. Sometimes it works, sometimes it doesn't. Oreo apps aren't made to work under Pie and they can error.
Click to expand...
Click to collapse
This sounds to me, the combination of "old" Navi-apps with Pie is the problem. May be only with Pie on some Sonys.
I'm afraid, a reset will not change the frozen display.
All other apps till now do not freeze after display-on except MagicEarth and Osmand+
This 2 apps i deinstalled (+ deleting the data) and installed again.
A reset will fix your problem and if you use Xperia transfer then the amount of personal information lost will be minimal.
Click to expand...
Click to collapse
Xperia transfer shows me only 2 apps for backup.
I'll probably try a reset in the next few days anyway.
bye,
Ralf
thegrobi said:
Thanks for the links.
This sounds to me, the combination of "old" Navi-apps with Pie is the problem. May be only with Pie on some Sonys.
I'm afraid, a reset will not change the frozen display.
All other apps till now do not freeze after display-on except MagicEarth and Osmand+
This 2 apps i deinstalled (+ deleting the data) and installed again.
Xperia transfer shows me only 2 apps for backup.
I'll probably try a reset in the next few days anyway.
bye,
Ralf
Click to expand...
Click to collapse
Looks like there is know issue with the Osmand+, the date of the post is may last year, but it may just be a 'feature'
When backing up with Xperia transfer, make sure you select all the boxes that are optional. It's things like text messages/contacts/phone history that are useful after a reset. Some apps can't be moved and have to be downloaded directly from the playstore, but Google should give you that option, after you log back in to the wiped phone.
Edit: I can recomend Sygic, free maps for one country, works without data.
In the meantime, I found more users with this problem and a little solution that another user describes:
I can confirm I have the exact same issue since Android 9 with my Xperia xz1 compact.
I normally have no lockscreen options set. So when I wakeup the Phone, it sometimes kind of 'locks' the screen. Widgets do not respond, I cannot switch home screens. The time on the status bar remains correct. If I then click on an app and go back, everythning behaves normally.
So I'm quite sure this must be a software issue, as other people have this problem to.
My workaround for now is to have a lockscreen option aktive. But I would rather have not, for conveniance.
I tested this also with safe mode and complete factory reset of the phone. The 'bug' is still there.
Click to expand...
Click to collapse
If I disable lockscreen, then apps stop when it is switched on again. However, I always have to enter pin or use fingerprint sensor, or smart lock.
This often does not work when cycling and is dangerous when cardriving.
On Android 8, the lockscreen did not need to be active.
So the problem is not Osmand and MagicEarth.
It is a Sony 9 bug with Android 9.
bye,
Ralf
Found in an other forum an easy method to reproduce the problem.
disable the screen lock (it must be set to "None");
lock the phone and then unlock it;
lock and unlock it again.
Click to expand...
Click to collapse
bye,
Ralf
---------- Post added at 01:50 PM ---------- Previous post was at 01:20 PM ----------
Because I believe that Sony will not fix the error, I could imagine a solution:
An app (possibly tasker), which puts a selectable running app from foreground while pressing the power button in the background and immediately brings it back to the foreground.
Does anyone know such a tool?
bye,
Ralf
[/COLOR]Because I believe that Sony will not fix the error, I could imagine a solution:
An app (possibly tasker), which puts a selectable running app from foreground while pressing the power button in the background and immediately brings it back to the foreground.
Does anyone know such a tool?
bye,
Ralf[/QUOTE]
So, did you ever find a solution?