Samsung galaxy tab sgh t849 can't connect in download mode. - Galaxy Tab Q&A, Help & Troubleshooting

Hi all...I have a very big problem. when I plug my tab into my pc it recognizes it with no problem until I try it in download mode the I get a message saying that my usb port has malfunctioned. Then I switch back to any other mode and its connects again with no problem until. I don't know what to do. I'm 2.2 and rooted but just want to install cwm or twrp recovery, update to 2.3 gingerbread and maybe flash a Rom. I can't connect to odin or the other when in download mode but they recognize it in regular mode with no problem. Please any help will do.

Can you stop Kies?
Or uninstall it, and only install Samsung usb driver.
Sent from my GT-N7100 using XDA Free mobile app

priyana said:
Can you stop Kies?
Or uninstall it, and only install Samsung usb driver.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
I don't have Kies anymore. I tried that a few weeks back trying to find a solution for this same problem.

lordhavmercy said:
I don't have Kies anymore. I tried that a few weeks back trying to find a solution for this same problem.
Click to expand...
Click to collapse
how about using different USB port? And the reinstall usb driver?

priyana said:
how about using different USB port? And the reinstall usb driver?
Click to expand...
Click to collapse
I have most def tried that but no good. I'm stumped, I wish it was some way to install a recovery from my sdcard.

I guess you only have 3 (or 4) options to try:
- try heimdall
- try on another PC
- boot a livecd linux and and install heimdall on it.
(if you have a spare hard disk, just remove the current one, and stick a new disk and install a clean OS)

priyana said:
I guess you only have 3 (or 4) options to try:
- try heimdall
- try on another PC
- boot a livecd linux and and install heimdall on it.
(if you have a spare hard disk, just remove the current one, and stick a new disk and install a clean OS)
Click to expand...
Click to collapse
Sounds like I really only have 2 options
1. Try another computer because I've tried Heimdall and it's the same as Odin. It connects to both when in normal mode or even Samsungs recovery mode but when i put it in download mode, it's a no go.
2. Just stay on a rooted 2.2 (which sucks)

Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.

priyana said:
Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.
Click to expand...
Click to collapse
Sounds like that factory reset option might work, I'm going to try that when I get home around 10:30. I'll let you know how it goes.

update.....well I tried the factory reset plan and it didn't work....In download mode I still get the same message stating that one of my usb ports have malfunctioned. I'm going to try it from another computer tomorrow.....hopefully the problem is with my computer and not the device.

priyana said:
Are you using the original cable?
Heard of some issue with non original, but I have a non original that works for me.
Also,
- factory reset, then boot to download mode, start Odin on PC, then lastly, connect the tab
- or may worth going to Device Manager, uninstall the driver, and delete the device (not sure if that is doable, not in front of a Microsoft OS), then click the scan for changes again to let it detect.
Click to expand...
Click to collapse
I wonder if i can use adb to install cwm or twrp recovery......or if I can flash without being in download mode

Hi. I have similar problem like lordhavmercy. When I connect tablet with PC on download mode and start Odin there is no yellow COM field just blank white field. My PC recognize it as a Samsung USB Composite Device:
http://prntscr.com/3p9hhu
Tablet (P1000) are on 2.2 Froyo and I think it is rooted. Somewhere I have read that if there Superuser icon that means it is rooted. I have Superuser Icon and that aplication look like this:
http://prntscr.com/3p9o2h
Is anyone have solution?

Related

Help, Bricked and no solution is working

Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
vstarrydr05 said:
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
Click to expand...
Click to collapse
Is download mode still available? If yes your not screwed but your drivers might be.
What steps do you use to get into download mode.... 3 buttons or usb/vol+- combo ?
Yes download mode is available. I used the holding the volume up and down and plugging in USB. It goes to download mode with no issues whatsoever.
Well then this is a non-issue issue... Possibly a bad flash... Go in download mode again and reflash.
Your a bit crying wolf with no reason here. As long as download mode works and Odin detects the phone you have no issue
Use the Odin-one click if you have to ...but really calling it a brick when you have download mode gee-wiz.
Thats the issue. It is not detecting in ODIN. If it was detected I would have reflashed with no problem. I get the message that the USB device has malfunctioned and is not recognized
Try re-downloading the USB drivers - use the ones found in my signature.
If you can get into recovery - you can then get back into CWM and attempt to re-flash again - but you'd still need to 1-click back to stock using ODIN.
Have you tried to plug the usb cable in the Mb directly or changing its port ?
I actually downloaded your drivers last night and installed them. Still not recognized. I can get to CWR and have the zip files for AXURA and Cognition on the SD card. Get errors on various lines when trying to install either. I have tried 3 different cables and 4 different computers with no luck on recognition
Well crap... I did have the USB issue on my work's XP Machine - but when I went home to my Windows 7 box - it ended up finding the phone fine and I was able to flash back to stock.
Any chance you can find a Windows 7 box?
Dont know anyone with one unfortunately. I need to install Win 7 through bootcamp on my mac. I tried to even get it to mount as storage through CWR on it with no success
Well.. I can say with 99% certainty you should be able to restore the phone.. also if you look at my sig - I just added a link to the OTA_JH7.zip that is CWM flashable if you could somehow get the zip onto your phone that is lol.
Hm.. and I dunno how the virtual box of Win7 will run - but it's worth a shot. Windows 7 seems to be superior when it comes to figuring out devices vs. XP. I was shocked when it found my then toasted phone (similar issue your currently experiencing).
Haha, I have your zip to as a matter of fact. I picked it up but I dont know how to get it put on the phone if it wont recognize usb. If CW usb mounting would have working I was gonna put it on the internal sd and let it flash it
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
vstarrydr05 said:
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
Click to expand...
Click to collapse
Duh.. been awhile since I've used MAC - you are quite correct
ok, on the flashing back either rom I get a error on line 10 trying to reflash AXURA and a error on line 12 with Cognition
Hmm. have you tried to do the factory reset from within CWM? I mean at this point.. can't lose anything by trying it.
Yeah, just did the wipe/factory reset through CWR. Still sticking on the same screen
Try this.
-Unplug the phone
-Uninstall all the current Samsung drivers you have, reboot
-Install this one, reboot
-Put the phone in download mode
-Plug the phone
Does windows install the drivers? If not continu
-Open Windows Device Manager and do a plug&play search
-If you have a ? device select it
-Right click/Update Drivers
-Select automatic...... if windows finds nothing return and select Manual.
-Choose the "Samsung ADB composite device" driver and install
Is the install successful ?
-Now unplug the usb cable
-Open Odin
-Plug the usb cable
Does Odin now see the phone ?
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
ronf1011 said:
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why would you brick a working phone based on a driver issue ?!
That's like blowing your car engine cause you can't communicate with onboard electronics........ unreal

[Q] USB device malfunctioned

I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
banttu said:
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Click to expand...
Click to collapse
banttu said:
I don't really know what I messed up but my computer doesn't recognize my phone any more.
After flashing Ultimate 8.2 beta and Ultimate 8.2 it just doesn't work.
What could I have done the mass storage is working with everyone except me.
I included some pictures. I'd appreciate getting helped.
Click to expand...
Click to collapse
try uninstalling the drivers for your phone on the pc.
factory reset your phone.
Does it recognise in odin when in download mode?
The same issue. I have Ultibread 1.4 and wanted to flash the JVK but windows keep disabling it. Can't find the device either in normal state or in download state. Odin also didn't recognize it
I'm on win7 x86
Did a factory reset - still the same
I tried different cables and PC's - no luck Anyone !! Any idea?
nightrave said:
I tried different cables and PC's - no luck Anyone !! Any idea?
Click to expand...
Click to collapse
I solved my problem here's the steps.
1. make sure that you have a rom on your sd-card to flash (just in case)
2. do a nandroid backup trough CWM
3. factory reset your phone, reboot
4. uninstall the phones drivers from the computer. unless you have a computer which doesn't have them installed
5. Connect your phone into computer and let it install the sd-card drivers
6. remove the mass storage from your computer safely
7. install the samsung galaxy s drivers for your computer
8. plug your phone into the computer. now it should be recognized and you'll be able to flash to stock if you want via Odin
Didn't help in my case. I did the backup and wipe/factory reset the phone. Enabled the debugging mode, removed kies and all the drivers, rebooted the phone and the pc, connected the phone to pc and had the same message Any idea where I could got it wrong?
P.S. ANd the phone is now extreeeemly laggy and unresponsive
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
nightrave said:
Well this is brilliant! I have made it even worse. I thought thought, that maybe the kernel is the cause of the issue, downloaded the SGS KErnel flasher and flashed the CF-Root-XW_OXX_JV1-v1.3-BusyBox-1.17.1. After the reboot the phone is stuck at the GalaxyS logo and is not booting. I can get into the recovery and the Download mode but the phone is still not being recognized and when I try now to wipe/data or do a factory reset I get loads of red errors Please tell me that I didn't brick it yet
Click to expand...
Click to collapse
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
banttu said:
Do you have a rom on your sd-card? Flash it trough recovery.
Or doesn't recovery even recognize your sd-card?
Click to expand...
Click to collapse
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
nightrave said:
I have forgot to put it on ( ARghhh! My stupidity is amazing.
When I go into recovery I get lots of:
e:failed to mount /cache
and
e:Can't open /Cache
Click to expand...
Click to collapse
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
banttu said:
And I guess that there's no nandroid backup either?
Though they didn't work in my case.
Click to expand...
Click to collapse
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
nightrave said:
It was in the previous kernel. But in the last one I've flashed there is no restore/backup functionality, although the backup might be actually be on the sd card
Click to expand...
Click to collapse
Well, there seems to be only a one solution.
You have to uninstall the phones drivers, and install them again.
Then plug your to your computer in download mode and it'll install rest of the drivers.
Then Odin should be able to recognize your phone and your good to flash stock.
But you really, really have to uninstall the drivers
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
nightrave said:
Well I did it before. I uninstalled all related to samsung from the add/remove programs. Rebooted the pc and still getting this error. In the properties of the device in the device manager I have "unknown device". I don't have any drivers on the pc as far as I see. I install the drivers from here. Connect the device again and get the same error
Click to expand...
Click to collapse
Hmm.. I did change the computer.. Maybe you should put the drivers on a flash drive and go to your friends computer to flash.
The thing is that he does not have the drivers installed before either.
Don't know why it worked for me but... it worked.
I am going to try the last thing - I have a System backup from the time I definitely didn't have them on the PC and see if this helps....
Nope.... Didn't help.... I am completely desperate. Maybe anyone would have another magical solution?
Guys! ANy idea? Plzzzzz. I'd do anything to get it back to life
Me too i get "unknown device" when attached with usb in download mode...ive been trying to get it back workin for a week now...tried everything...which means i can't flash it to gingerbread
Anyone got any ideas ?
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
nightrave said:
I have tried different PC's and it's the same. Is there maybe a way to reset the device somehow?
Click to expand...
Click to collapse
Hi!
I have a similar problem.
For few days, I cannot connect my SGS to my Notebook.
I have windows 7 x64 installed, and it has never had any problems with connections.
Now, I don't know why, but I cannot connect it.
I tried to connect it to another computer, which has windows 7 x86.
And it was succesfull!
Now, it seems, that I don't have a hardware issue, but I cannot imagne, how I could solve this problem.
I already tried these:
- remove drivers/programs
- tried other USB slots
- downloaded newer USB driver for x64
- removed USB drivers (all of them)
- unplugged my notebook for over 5 minutes (also removed the battery)
Every time I plug my SGS to my PC only this message appears:
"unknown device" - or something similar, because I have a hungarian windows 7.
Sorry about my english.
Has anyone any idea?
Thx for advance

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.

Help! Odin not seeing phone!?

Ive got my phone into a boot loop state because I messed up when trying to restore a previous backup of CM7 that I had.
Okay I thought, this is not a problem I will just do a clean flash of something via odin with my phone in download mode. This is where the problem lays. Odin can not see my phone when its in download mode and plugged in via USB! I have flash roms via Odin before so know what I'm doing.
I've tried it on 2 windows 7 64bit laptops and different USB ports but both are the same! could this be a driver issue? I have Kies installed on both and have manually tried installing the driver too.
Other things to note is that I can't get into recovery mode but no problem getting into download. Also when I plug the phone into charge it doesnt come up with the battery symbol but only the circle of rectangles like it is loading the battery symbol which never appears.
Anyone know what is going on?
Sorry for bad english.
I had problem like yours - pc don't recognized my phone (odin too) and shows only battery charge. i tried on 3 different pc's, installed kies, pc studio, drv, tried 2 differnt cables.
And the problem was... Cables
Sent from my GT-I9000 using XDA App
Deck6rd said:
Ive got my phone into a boot loop state because I messed up when trying to restore a previous backup of CM7 that I had.
Okay I thought, this is not a problem I will just do a clean flash of something via odin with my phone in download mode. This is where the problem lays. Odin can not see my phone when its in download mode and plugged in via USB! I have flash roms via Odin before so know what I'm doing.
I've tried it on 2 windows 7 64bit laptops and different USB ports but both are the same! could this be a driver issue? I have Kies installed on both and have manually tried installing the driver too.
Other things to note is that I can't get into recovery mode but no problem getting into download. Also when I plug the phone into charge it doesnt come up with the battery symbol but only the circle of rectangles like it is loading the battery symbol which never appears.
Anyone know what is going on?
Click to expand...
Click to collapse
If you are CM7, you may need Nexus S Drivers.
See this link
http://forum.xda-developers.com/showthread.php?t=1061946&page=879
Download and extract to folder.
When phone connected, locate it in your computers devive manager and update driver and point to your folder where you extracted for installation.
Thanks spaikas!
I guess I will have to go out and buy a new cable to try that. One thing though is that even when I plug it into the mains power adaptor I still get the circle of rectangles as well as when its plugged into my PC (with the supposedly defective cable). So does this suggest that the circle of rectangles is not caused by a bad cable? but still my cable being bad could be a culprit for odin not seeing it.
chablo12 said:
If you are CM7, you may need Nexus S Drivers.
See this link
http://forum.xda-developers.com/showthread.php?t=1061946&page=879
Download and extract to folder.
When phone connected, locate it in your computers devive manager and update driver and point to your folder where you extracted for installation.
Click to expand...
Click to collapse
Thanks. I have downloaded and extracted the driver. But I can't find my phone in device manager. Does the phone have to be in download mode for windows to be able to see it. Do you know roughly what it would be called?
Deck6rd said:
Thanks. I have downloaded and extracted the driver. But I can't find my phone in device manager. Does the phone have to be in download mode for windows to be able to see it. Do you know roughly what it would be called?
Click to expand...
Click to collapse
No, actually enable USB debugging and go into CWM recovery and connect, mine was showing as Samsung Galalxy S or Android phone. Check in USB devices as well.
chablo12 said:
No, actually enable USB debugging and go into CWM recovery and connect, mine was showing as Samsung Galalxy S or Android phone. Check in USB devices as well.
Click to expand...
Click to collapse
I can't get into CWM! Is there no way to install the Nexus S driver without having the phone plugged in because otherwise I have no idea what I'm going to do....
It was my cable! Sorry for wasting your time guys but it was just a very unlucky coincidence that my cable must of broke at the same time that I messed up my phone and needed to do a odin flash! Anyway managed to get my hands on another cable and now odin can see my phone!
) congratulations!
i was so happy too, when i pluged 3rd cable, and found it good
Sent from my GT-I9000 using XDA App

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

Categories

Resources