Related
I have a Samsung GS2 (with 2.3.3) and I just got a P970 which I upgraded to (2.3.4) for use with a foreign SIM.
I didn't do much research and thought 'they're both Android GB, they'll be the same' - ho ho. Had a bit of a fight with the p970 but eventually got all my apps etc installed so it's very similar to my GS2 which is what I want... Not that the GS2 way of doing things is particularly better I just want them both to be usable in exactly the same way to avoid frustration.
I've noticed some things that I really want to fix:
1. The GS2 leaves wifi on all the time, whether it is asleep or not. I want this because I use push email with K9. The p970 turns the wifi off when the phone is asleep - so K9 uses mobile data for email, which is a pain. I used titaniumbackup to move the K9 install and settings from the GS2 to the p970 - I also later removed it and installed it through the market. No difference. Can I force wifi on while the phone is asleep?
2. The scroll feel of the p970 was very light with no friction - pages scrolled on forever gradually coming to a stop. I managed to fix that (removed the lgscroller in the build.prop) but the p970 has a 'glow' effect when you try to scroll beyond the end of a list (the list doesn't move any more, the bottom of the list glows blue) whereas the GS2 has this 'elastic' effect (you can scroll the list right off the screen but it moves at half speed and springs back into place when you let go.) Can I replace this somehow?
3. In Dolphin HD, the GS2 scroll snaps to axes - if I scroll vaguely vertically, it knows I mean 'scroll vertically'. The P970 interprets anything other than a very deliberate vertical scroll as meaning 'scroll diagonally'. It's a pain. What on earth causes this?
4. The included mms.apk is crap. Can't insert contacts as plaintext? I want the GS2 mms.apk - I tried to adb install it but it failed on dependencies. Is it possible? I am using Handcent on the p970 now after trying Go SMS, tbh not really liking ether.
Apart from all that it's fine albeit a bit slow. Biggest gripe is the positioning of the unlock button.
Any advice?
I really don't know the others, but for #1 you go to settings>wireless>wi-fi settings>advance[press menu button the square one]>wi-fi sleep policy there you can choose to never sleep
Thanks for that, didn't even know there was a submenu to the wifi menu. Wifi now remains on regardless!
#2 you would have to install a Cyanogen ROM, there you can choose what to happen when you scroll past the end of the list (Glow, Bounce or Glow+Bounce). The official Rom (and those built on it) don't support changing the way the "scroll past end of list" animation, it's only present in ROMs built on Cyanogen (for example the MIUI one).
Now, i don't know how stable the Cyanogen ROMs are, you'll have to read about it in the forum and decide if it's worth it for you or not.
#3 i saw that the Optimus Black interprets pressing/dragging on the screen a little different from other phones, probably comes from the way LG implemented the digitizer interface, i don't think you can change that (i very often drag icons on the launcher instead of starting the apps even though i do the exact same movement as i do on my Samsung Spica and there i never had this problem).
#4 the applications bundled with the SG2 have dependencies on libraries on the phone, you would have to also copy the files from /system/lib the problem is that you can't just copy all the files since many will be present on both phones but with different version and dependencies.
You would probably have to experiment by adding different libs and seeing if it works or not.
I tried only once to port and app and after several hours i got to a point where the lib required by the app was already present on the phone but a different version, i tried adding the other version which crashed many of the already existing apps so i gave up
Thanks for that - I understand the Cyanogen ROM isn't stable yet (?) so I'll wait a bit before trying that... need the thing usable as a phone, can't keep bricking it!
For the last point, is there a way to identify from the APK which libraries it's looking for? Something like the 'ld' command in Linux?
bluetooth locked
hello everybody!
I can't use bluetooth.
I open settings, open wireless and network settings, tap bluetooth, enter access bluetooth settings, tap make discoverable, (untap make discoverable then), but:
1.) I can't scan for devices: tap and press but nothing happened,
2.) I can't modify my device name, I have one, but can't rename,
3.) I have a long list of bluetooth devices discovered but not paired, but I never allowed, and
4.) I can't remove these devices from my Bluetooth pairing list:
when I press and hold on the name of the device I want to remove, applications close and get out from settings.
5.) I can't discover and pair my bluetooth headset.
Get out the baterry, get out SIM, get out micro sd: not working!
I have 2 same smartphones. the another optimus black in working very well, including the same headset.
can you advise me, please?
thanks.
oalgvi17 said:
hello everybody!
I can't use bluetooth.
I open settings, open wireless and network settings, tap bluetooth, enter access bluetooth settings, tap make discoverable, (untap make discoverable then), but:
1.) I can't scan for devices: tap and press but nothing happened,
2.) I can't modify my device name, I have one, but can't rename,
3.) I have a long list of bluetooth devices discovered but not paired, but I never allowed, and
4.) I can't remove these devices from my Bluetooth pairing list:
when I press and hold on the name of the device I want to remove, applications close and get out from settings.
5.) I can't discover and pair my bluetooth headset.
Get out the baterry, get out SIM, get out micro sd: not working!
I have 2 same smartphones. the another optimus black in working very well, including the same headset.
can you advise me, please?
thanks.
Click to expand...
Click to collapse
Is it on another ROM maybe? If so, which one do you use? Or did you maybe restore a backup of another phone?
Sent from my LG-P970 using XDA
Note: I'm still working on this, and this guide may miss a few things/be incomplete. I'll subscribe to this thread but if I don't reply you can PM me.
I had a Droid 3 but the ribbon cable developed a nice hearty tear. I haven't taken the money to buy a new one to put it together, and since my wife's Droid 3 has a busted glass screen but everything else works, she'll probably assemble it herself. So that left me phoneless. To save a buck, I got a cheap wireless plan locally ($19.99 unlimited talk/text), but I am on a dumb phone. I really only wanted a MP3 player and the ability to surf the web casually without getting on the computer.
The biggest problem is that Android is too dependent on touch interface, which I didn't have due to the infamous bad digitizer ghost issues. So that left me a little irritated, since it was sitting in my drawer and collecting dust. So after much research, tweaking, and playing, here is what I got so far:
1) Download your ROM of your choice. I wanted Jellybean since we had it and I think ICS/JB look prettier than GB anyway. So I chose CM10.
2) The biggest problem will be the lack of touch input. This causes three problems: setting up the phone, using the back/home/menu/search buttons, and unlocking the screen. I got past this by first using a data cable and connecting via ADB. I can't find the app since I'm at work but it's on Google Groups and a bit of searching should help you find it. If you scroll down a bit someone updated it for JB. You just need Java and ADB.
3) The next problem was the keys. In /system/usr/keylayout/sholes-keypad.kl edit this file (adb pull /system/usr/keylayout/sholes-keypad.kl is your friend then adb push). Remap key 100 (right alt) to home wake_dropped, key 54 (right shift) to back wake_dropped, and 139 to menu wake_dropped (menu key don't work on JB on keyboard until this).
4) Install v6 Supercharger (easy to find and plenty of guides so I'm not going to hash that out). In there is a section of Bulletproof apps. Download from the Play Store the app Argus Touch Blocker and add it to the Bulletproof list. Then Enable the service and block the screen on any shaking.
5) The only browser that seems to work (have to use remote control over ADB to accept EULA) is Opera Classic.
If anyone else has suggestions/tips I'm open as well.
Just thought it was a good idea to open a thread with "issues" to be solved or things we want to get working on the Gear. I myself have a thing of two that I want to solve. For this I searched through some threads, saw some people mention the problems but never found a solution (although apparently other people were working on it to).
Because I like to be part of the solution but don't want to reinvent the wheel I thought it is maybe a good idea to sum some things up that need a solution in one thread.
Basic thing that I'm looking for and not sure if it is solved is
enable/disable BT tethering with just one tap (so to speak). Ideally automagically when opening an app that needs an internet connection
(If the problem isn't solved I was thinking to write an app for this)
(Reserved : list with open issues )
Id love someone to be able to rewrite the newest gear manager to work with people not on 4.3.
Or someone to get the things not working on 4.2 like weAther etc.
A native sms app that syncs with the phone properly. or get tablet talk to display names.
appelflap said:
enable/disable BT tethering with just one tap (so to speak). Ideally automagically when opening an app that needs an internet connection
Click to expand...
Click to collapse
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
I'd quite like to be able to swipe away notifications, both individually and per app. Currently it's a bit of a hassle..!
fOmey said:
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
Click to expand...
Click to collapse
I've never used tasker before. Maybe worthwhile to dive into it.
Also played with Bluetooth Auto Connect. I used it to maintain a connection. (But concluded very quickly that that will drain the battery of the Gear like hell LoL). Where do you use Bluetooth Auto Connect for in this scenario? I mean,if I understand you correctly everything can be done with Tasker.
appelflap said:
I've never used tasker before. Maybe worthwhile to dive into it.
Also played with Bluetooth Auto Connect. I used it to maintain a connection. (But concluded very quickly that that will drain the battery of the Gear like hell LoL). Where do you use Bluetooth Auto Connect for in this scenario? I mean,if I understand you correctly everything can be done with Tasker.
Click to expand...
Click to collapse
Bluetooth auto connect works as a plugin for tasker also, so you can incorporate bluetooth auto connect functions in your tasks.
You must get tasker, its a device changer.. both phone & gear.
fOmey said:
Bluetooth auto connect works as a plugin for tasker also, so you can incorporate bluetooth auto connect functions in your tasks.
You must get tasker, its a device changer.. both phone & gear.
Click to expand...
Click to collapse
Downloaded tasker. That's a f**ing brilliant app!
appelflap said:
Downloaded tasker. That's a f**ing brilliant app!
Click to expand...
Click to collapse
Its great isn't it.. opens up so many possibility's.
I'd also quite like to have 2 finger double tap to show recent apps and 2 finger long press to show battery info.
i would love to have double tap on the watch to wake.
fOmey said:
Very easy with Tasker & Bluetooth Auto Connect.
Iv set up so if my device is locked & the screen is off for 30 seconds, it will disable bluetooth tethering for battery reasons. Iv also setup so if I slide two fingers up on my Novalauncher homescreen it will enable bluetooth tethering. Alternatively you can also enable a launcher shortcut which will execute the task.
You can also setup so bluetooth tethering will automatically be activated when launching certain applications.
If you need further instructions, dont hesitate. Tasker can be a little intimidating at first if this is your first time using it.
Click to expand...
Click to collapse
fOmey do i only need tasker on the phone in order to do that? The way i am manually doing it is i first enable tether on the phone ands then dive into the full settings on the Gear.
If the phone stops tethering then the Gear option automatically gets unticked, but it does not work the other way around.
I have tasked installed on both phone and gear. Could you please provide some instructions?
Also, have you checked Atooma? I have it both on the S4 and the Gear and i can do stuff on the phone with three triggers from the watch:
1) Horizontal movement
2) Vertical movement
3) Photo taken
Does tasker integrate with the watch the way Atooma does?
Thanx again for everything you have done.
YOU ARE THE MAN!
I'd like to be able to scroll down and see a playlist and pick a song
Sent from my SAMSUNG-SM-N900A using xda premium
Functionality improvement - (we just need a piece of software for that) - to display on the GEAR atmospheric pressure, humidity, temperature - all of those sensors are in NOTE3
The other day, I read a post by a user who lost his new Z1 in a shopping mall. So I just want to know, what would be the best app to track your Z1.
In India, I have preloaded apps like Mcafee Security, X Alert for Xperia, Android Device Manager. Also play market is flooded with many tracking apps. But my concerns are :
1) What if the Sim is changed ?
( since you don't have new no, you can't send sms commands..do we have a tracking app which can also notify the sim change)
2) What if GPS and 2G/3G connection are off ? ( I usually keep them off to slow battery drain)
3) What if the thief is a pro ( n also follows xda :laugh: ) and flashes a New rom.
I am ready to root my device for the sake of security and can also buy a pro version of any app to ensure safety.
P.S. : In India, you can easily lose a phone in metros, malls, buses etc. So believe me, I'm not paranoid my concerns are very much genuine.
i agree with the OP .. even i would like to know and do the same
I use Cerberus. You can use it on 5 of your devices for one license I think and it's cheap. It's also light, no anti virus bloat. Just tracking. Can monitor for sim changes. Also has root features like uninstall protection.
I've been using it for a few years now. Once off payment. No subscription
Sent from my C6903 using Tapatalk
If you have root on your phone Avast has a really nice feature as it allows the Anti-theft to be installed in the root of your device. You can also prevent third-party from accessing the setting etc etc. + all the standard features. It is free so give it a shot.
No chance
3) What if the thief is a pro ( n also follows xda :laugh: ) and flashes a New rom.
P.S. : In India, you can easily lose a phone in metros, malls, buses etc. So believe me, I'm not paranoid my concerns are very much genuine.
Click to expand...
Click to collapse
Most anti theft software will work up until flashing or phone is put into airplane mode. What would be clever is if said anti-theft software turned off airplane mode to call home every hour or so. As most task schedulers need root to do this the only thing I can suggest is that you invest in a Bluetooth headset. Negating the need to take the phone out of a secure place in your pocket. Would you feel better losing a headset over a phone?
Google also provide anti data theft function to wipe the phone if you trust them.
Not sure if you have insurance in india but in the UK if you lose your phone. Just IMEI block it and make an insurance claim. At least the phone is not usable once you report it lost or stolen obviously other aspects can be used.
If you want security then encrypt your storage and pin and sim lock the phone. It's not perfect but if someone is hell bent on trying to get access to your data you have a better chance of wiping it before they can try to unlock. Don't know what the lifetime of decrypting a storage card is but there are some things you can do in Android that don't require extra apps.
I would recommend Macrodroid Pro Edition
With the Macrodroid Pro Edition you can create a macro (a script with a set of instructions to be run when a certain condition is met)
This macro could respond to an incoming SMS containg a specific text like: "locate" , or could run with a timer (ex: once an hour/once a day)
and you would make a macro that simply:
-turns on wifi
-turns on mobile data
-turns on gps
-wait 20sec before next command
-refresh the positioning data
(it means that the phone will try to locate its own position using any of the above methods and respond with the most accurate location it can find)
-wait 20sec before next command
-Send the info via email to your account (or back to the phone that sendt the locate SMS) (i find sending to email safer)
(here you can repeat the refresh if you want to make double sure that you'll get a result)
(here you can repeat wait for 30/60sec)
(here you can repeat send to email)
-wait 20sec before next command
-turn on flashlight
-turn the volume to FULL for all types of volume
-play a sound or melody
-turn the screen on
-lock the screen (key lock)
-delete the incoming calls list
AND IF YOU MAKE ANOTHER macro YOU COULD LET THAT macro RESPOND TO SMS "locate and delete" AND PERFORM ADDITIONAL TASKS LIKE:
(-delete sms from specific contacts)
(-delete all sms andcall info)
(-move files into hidden folder (ex pictures) )
(-run another macro or program like dropbox or google+ to take remote backup of your pictures/recordings/sounds)
(-run commands to reset the phone to factory reset) (PS: this step will remove/uninstall macrodroid and prevent you from retrying to locate the phone)
So that even if you loose the phone, you might be able to save your memories and render the phone useless for the thief !!
And that should work wonders... You can find examples of macro's on macrodroids forum, and in the app itself
but for an advanced macro like this one would be, you would need the pro version in order to add all the needed macro-steps
And you will need ROOT access to be able to turn on the GPS (i recommend using "kingo android root" to root your Z1 phone)
and to get to some of the special features that can only be accessed on an rooted phone, i really recommend rooting your phone for this! )
This is what I do track my phone... and it works... as long as the phone can be reached using an sms or a phone call...
You could also force the phone to run this everytime it is being shut off (normally, but not with the hard-reset: power+volume up)
so to add another layer of protection...
or you could define that if the phone is not near a known location at a given time, then it should run this macro...
if you know that you're always home at 5pm or at work from 1pm to 7pm...
so whatever day the phone is in a different location than expected, at a given time, it will track itself and send an email with position data..
All this should add quite a good option for tracking your phone...
It is not 100% safe regarding to the thiefs that turn off the phone, or reset it... but then again... what is?
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Missing features.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
Click to expand...
Click to collapse
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
Phone calls? No. I believe this is a common issue, there is no phone hardware onboard. Though I'm not that familiar with that feature.
Email and other task could be handled with Autovoice if Google app can not. Again, not that familiar.
For me, the main missing feature was choice of navigation app. Nav questions will only launch GMaps, newer version can launch Waze or your nag app choice, by default.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Thanks for your comment. I tried your solution and its working better, i still get some errors time to time, but is much better...thanks
[
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
If you have a phone connected via BT you can make phone calls using OK Google.
Tumke32 said:
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
Click to expand...
Click to collapse
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
newt_dunbarton said:
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
Click to expand...
Click to collapse
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Can you elaborate on this process please?
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
aledesma said:
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
Click to expand...
Click to collapse
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
shaiq123 said:
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Click to expand...
Click to collapse
Hi,
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
Were can i find this option? I have a nexus 5 and i updated my google now, but there no option like that in google now. Or do you mean the option "bluetooth headset" under voice?
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
I can't find any options in Xposed MTC related to what you are writing. Are you sure this option is in Xposed MTC?
Thank you!!!
carter.w.jason said:
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
Click to expand...
Click to collapse
I will give it a shot!!!
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Mr Bigglesworth said:
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Click to expand...
Click to collapse
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
dc5daft said:
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
Click to expand...
Click to collapse
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Mr Bigglesworth said:
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Click to expand...
Click to collapse
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
dc5daft said:
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
Click to expand...
Click to collapse
Thanks for this - and yes this where I had got to (which make me feel better!). And I too think the camera button may not be workable without root.
I think I need to change my plans and see if I can prevent the lockscreen to come on when connected to this bluetooth device. That way I can fall back to using ok google as the lockscreen prevents ok google from completing requests.
Okay - think I've done that and it was easy enough, now have a profile which when connected to HU through bluetooth does (1) set off wifi tether and (2) Set keyguard off. Then with (3) double tap to wake screen and (4) Ok google should be able to do what I need it to.
Last thing I'm wondering if you could do is to create a large voice dial icon (double normal size etc) on screen (in case initial ok google doesn't work)...