computer won't see usb debugging - Xperia Z Q&A, Help & Troubleshooting

Hi all I have just bought my xz and I'm trying to root 4.3 but my computer won't see usb debugging the root tools just says device not connected even though I can browse through my address cards I have installed flashtool drivers and adb drivers that. Way because the prompt never popped up when I first connected my phone but still can't see usb debugging. Any ideas. Thanks

Unplug the device from the computer
Download latest adb, which is most likely outdated
Turn off USB debugging and turn on again
Connect it to the computer
Accept the key popup
Run adb
Google will help you more than me, as I did this from memory and used Google a few days ago with the same problem.

antonio1475 said:
Unplug the device from the computer
Download latest adb, which is most likely outdated
Turn off USB debugging and turn on again
Connect it to the computer
Accept the key popup
Run adb
Google will help you more than me, as I did this from memory and used Google a few days ago with the same problem.
Click to expand...
Click to collapse
Thanks Bro I did a Google search first but didn't find anything related to my problem

gavster26 said:
Thanks Bro I did a Google search first but didn't find anything related to my problem
Click to expand...
Click to collapse
Download the latest version of flashtool from http://www.flashtool.net/download.php
navigate to the driver folder and install the fastboot and flash mode drivers.
open flash tool put your phone is fastboot it will install the latest drivers automatically.
after that try rooting following the below procedure
http://techbeasts.com/2014/02/21/ro...-latest-10-4-1-b-0-101-firmware-how-to-guide/

androidtweaker1 said:
Download the latest version of flashtool from http://www.flashtool.net/download.php
navigate to the driver folder and install the fastboot and flash mode drivers.
open flash tool put your phone is fastboot it will install the latest drivers automatically.
after that try rooting following the below procedure
http://techbeasts.com/2014/02/21/ro...-latest-10-4-1-b-0-101-firmware-how-to-guide/
Click to expand...
Click to collapse
Sorry already sorted it out Bro I ran adb kill-server adb start-server and accepted the prompt on my z now all well but thanks anyway

gavster26 said:
Sorry already sorted it out Bro I ran adb kill-server adb start-server and accepted the prompt on my z now all well but thanks anyway
Click to expand...
Click to collapse
:good::highfive:

Related

[Q] Help Unlocking Bootloader?!

Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
emoratori said:
Tried the sony method... Device not found...
Tried the flashtool method... Device not found...
I don´t know if I´m getting the fastboot drivers right or not, the does turn blue when I connect it to the PC in fastboot mode...
USB debugging is checked...
Does the phone need to be in sotck FW 350?
Help?
Click to expand...
Click to collapse
First of all, Bootloader Unlock Allowed: Yes?
diego9016 said:
First of all, Bootloader Unlock Allowed: Yes?
Click to expand...
Click to collapse
Yep...
emoratori said:
Yep...
Click to expand...
Click to collapse
Did you install the fastboot drivers?
diego9016 said:
Did you install the fastboot drivers?
Click to expand...
Click to collapse
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
How are them suposed to be installed?
emoratori said:
I did, but I don´t know if they´re working.
Didn´t notice anything different in the device manager.
The first time I connected my device windows couldn´t install them, but it did not ask for them again.
Click to expand...
Click to collapse
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
diego9016 said:
That's the problem. Windows can't install them just when you connect the phone, you need to install them manually.
When you downloaded the Unlock Bootloader tool, there was a folder or a zip with the drivers. If it is a zip, extract it.
Connect the phone leaving up arrow pressed, the led will turn blue.
Go to device manager on the pc, look for Fastboot or something like that.
Select browse my computer for driver software and select the divers folder. It should install them right away.
Now you have the fastboot drivers installed and you can continue with the procedure.
Edit: You already have the KEY from Sony?
Click to expand...
Click to collapse
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
I should power down the phone and connect it with vol up right?
emoratori said:
When I go to DEVICE MANAGER I can´t find fastboot or anything like it... There are a couple of unknown devices...
Click to expand...
Click to collapse
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
diego9016 said:
Win7?
Can you attach some screenshots of the device manager page?
Yes. You need to power off and connect the device holding up until led turns blue.
Click to expand...
Click to collapse
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
emoratori said:
Yeah, win7... 64x...
I´m at work right now... When I get home I´ll post...
PLEASE don´t leave me!!! hehehe...
Click to expand...
Click to collapse
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Fastboot drivers are unsurported on x64 you have disable driver verification
diego9016 said:
Don't worry, if I can help, I'll do it.
EDIT: When you get home, check this out. It was for 2011/12 devices, but most of the procedure works for the Z.
Click to expand...
Click to collapse
One question...
If I install the fastboot drivers through the flash tool should it work?
Maddhouse said:
Fastboot drivers are unsurported on x64 you have disable driver verification
Click to expand...
Click to collapse
How?
Thanks!
think this is it
1. download flashtool and install
2. type "bcdedit /set testsigning on" in cmd and restart PC
3. install driver in the flashtool "drivers" folder, check fastboot, agree when prompts
4. type "bcdedit /set testsigning off" in cmd and restart PC
http://msdn.microsoft.com/en-us/library/windows/hardware/ff553484(v=vs.85).aspx
EDIT:
Also this might be handy if you are planning alot of adb usage
Got it!
Usb debugging was MST and not MCS... duh...
Unocked...
Recovery...
Rooted...
THANKS!

[Help] SU660 Device error:Device Offline

Hi,
I am gettings this error when ever I do ADB commands to my SU660. Here what I have tried to do:
1. Restart the Phone and even the PC
2. Change Cable
3. Get latest ADB Tools
Hope some one can help me. I need to upgrade my brother's phone
God Bless!
Thanks,
Thomie
tjsas1 said:
Hi,
I am gettings this error when ever I do ADB commands to my SU660. Here what I have tried to do:
1. Restart the Phone and even the PC
2. Change Cable
3. Get latest ADB Tools
Hope some one can help me. I need to upgrade my brother's phone
God Bless!
Thanks,
Thomie
Click to expand...
Click to collapse
If your phone is running Android 4.2.2, and you are sure that you got the updated Android SDK tools for this particular version, then on enabling USB debugging, you should get a prompt on your phone "Allow USB debugging?" after connecting and running "adb devices", to which you need to answer "Ok"
If you are not running Android 4.2.2, try using ADB through wifi
rugglez said:
If your phone is running Android 4.2.2, and you are sure that you got the updated Android SDK tools for this particular version, then on enabling USB debugging, you should get a prompt on your phone "Allow USB debugging?" after connecting and running "adb devices", to which you need to answer "Ok"
If you are not running Android 4.2.2, try using ADB through wifi
Click to expand...
Click to collapse
Hi,
Thanks for you reply. The phone is on Android 4.0.4, also tried enabled USB Debugging but no popup is showing.
Hope you can help me
God Bless!
Thanks,
Thomie
Try the following:
1. A different port (are you using a USB 3.0 port? If so, try a USB 2.0 port). Try changing the port anyway even if you were using 2.0 too. You may need for windows to install the driver after changing the port.
2. Restarting adb service by executing "adb kill-server" and "adb start-server"
3. Uninstall the driver from device manager and restarting, and letting windows install the driver on its own
4. If none of these works, reinstall the SDK Tools and in that make sure that "Google USB Driver" is installed.
Lets hope one of these works
tjsas1 said:
Hi,
I am gettings this error when ever I do ADB commands to my SU660. Here what I have tried to do:
1. Restart the Phone and even the PC
2. Change Cable
3. Get latest ADB Tools
Hope some one can help me. I need to upgrade my brother's phone
God Bless!
Thanks,
Thomie
Click to expand...
Click to collapse
Try this one http://forum.xda-developers.com/showthread.php?t=1752074
Maybe your adb is out of date,get a new version
Sent from my XT875 using XDA Premium 4 mobile app

bootloop htc one after installing rom

hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Can you enter fastboot or recovery?
LarsRosenberg said:
hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Click to expand...
Click to collapse
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Sindroid said:
Can you enter fastboot or recovery?
Click to expand...
Click to collapse
I can enger fastboot but my pc says there is an error 43.
I can't go to recovery because when I go there hè shows the screen of the recovery And than he just reboot itself.
moha_moha20106 said:
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Click to expand...
Click to collapse
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
LarsRosenberg said:
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
Click to expand...
Click to collapse
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
http://pcsupport.about.com/od/errorc/a/code-43-error.htm
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
USB driver is still your key.
LarsRosenberg said:
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
harihacker said:
LarsRosenberg said:
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
LarsRosenberg said:
harihacker said:
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
moha_moha20106 said:
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
Click to expand...
Click to collapse
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
LarsRosenberg said:
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
Click to expand...
Click to collapse
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Thanks..
moha_moha20106 said:
LarsRosenberg said:
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
Thanks..:good:
Click to expand...
Click to collapse
moha_moha20106 said:
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Click to expand...
Click to collapse
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
LarsRosenberg said:
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
Click to expand...
Click to collapse
can you check FAQ #2 in this guide , read carefully, step by step
maybe same problem
Hey i have got a very similiar problem tried to load the new androidhd 62 kitkat on my the phone with the wrong custom recovery.
now i am stuck in bootscreen.
I can enter bootloader and fastboot. can´t enter cwm recovery fails everytime and restarts.
when i am in bootscreeen phone will be recognised but the big problem is when i am in fastboot the drivers seem not to work anymore so phone wont be recognised and can´t get anything going. I entered the device manager when i am in bootscreen the driver is working when in fastboot there is a ? at the driver and not really responding .
what can i do?

[Q] Nexus 6 not recognized by pc after been fully wiped out

Hi guys
Really need urgent help on this one
I wanted to update my nexus 6 to latest5.0.1.
Usually i flash factory images but this time i tried to sideload. This is what i did.
I wanted to factory reset my phone and wipe everything and then side load. so i used TWRP and wiped by mistake the android OS. Now im left with nothing but twrp which also deleted my recovery file.
Now i can access my bootloader and twrp.
My main problem is that when i plug my phone to my pc it does not recognize it and i tried every possible way suggested by NRT tool to update my driver and no luck?
When i plug it to the pc it charges and i get baloon message that pc did not recognized the device.
Im using original cable.
Any help is really appreciated
Thanks
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
fethi2 said:
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
try the universal adb driver http://adbdriver.com/
you can try this one too.
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
simms22 said:
try the universal adb driver http://adbdriver.com/
Click to expand...
Click to collapse
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
If mother board was damaged, you were not able to enter in bootloader Try installing universal driver as other suggested above or install motorola's driver
Najeeb Al Busaidi said:
As i said earlier my pc wont recognize my device.
Some said that my motherboard could be damaged is it true?
Click to expand...
Click to collapse
Enable usb debugging in developer options on the phone, then choose either the drivers posted above or the Google usb drivers from the sdk. Choose to install the drivers manualy in device manager when connected to the pc.
gee2012 said:
Enable usb debugging in developer options on the phone, then choose either the drivers posted above or the Google usb drivers from the sdk. Choose to install the drivers manualy in device manager when connected to the pc.
Click to expand...
Click to collapse
Debugging is both impossible and useless.
Can't set USB debugging if android is not installed. USB debugging only works in android anyway. It has no affect on bootloader or recovery
rootSU said:
Debugging is both impossible and useless.
Can't set USB debugging if android is not installed. USB debugging only works in android anyway. It has no affect on bootloader or recovery
Click to expand...
Click to collapse
Oke thanks, never to old to learn
gee2012 said:
Oke thanks, never to old to learn
Click to expand...
Click to collapse
99.99999999 .... % of the issue is USB Drivers on the PC in question.
I'd uninstall, then reinstall, or try the universal ones.
Try on another PC if available, once seen you can get it back.
fethi2 said:
if your pc can recognize your device in fastboot mode then you can go this thread
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
My pc cant recognize the phone while in fastboot
Hi guys
Check the attachment
And let me know if u found the problem.

Fastboot not detecting

Hi,
I have a problem with my device, when I connect it to pc adb can see it easily but when i type "adb reboot-bootloader" it boots to fastboot but my pc doesnt see the device anymore and there is no device detected when I use "fastboot devices" command.
It used to work before windows update but now it does what I said.
Is it because of the drivers? if so can anyone send me a link to proper windows 10 drivers for china k20 pro.
I'm not rooted and no twrp. Just the stock firmware (10.3.16).
Quaczi said:
Hi,
I have a problem with my device, when I connect it to pc adb can see it easily but when i type "adb reboot-bootloader" it boots to fastboot but my pc doesnt see the device anymore and there is no device detected when I use "fastboot devices" command.
It used to work before windows update but now it does what I said.
Is it because of the drivers? if so can anyone send me a link to proper windows 10 drivers for china k20 pro.
I'm not rooted and no twrp. Just the stock firmware (10.3.16).
Click to expand...
Click to collapse
I had this problem in my Nokia 7 Plus, then i used and installed "minimal adb and fastboot" file which detected my phone in fastboot. It installs in program file with a folder named "minimal adb and fastboot"
Sent from my Redmi K20 Pro using Tapatalk
You need to enable "USB debugging" in the developper options
ImEraaz said:
You need to enable "USB debugging" in the developper options
Click to expand...
Click to collapse
It is enabled.
And ill try with the minimal adb option
Update:
Still not working
I have same problem, there is no way to recognize my 9t pro in fastboot mode... i cant do anything
First it should be intel pc
Try to install Xiaomi drivers and adb
Boot to recovery and fastboot while connecting to usb to install the drivers
Then check again
Did anyone solve this? I'm experiencing the same issue. ADB works fine, but no device is listed at all (device manager in win7 or syslog in linux) when connecting the phone in fastboot mode. It's like it wasn't physically connected at all.
simpn said:
Did anyone solve this? I'm experiencing the same issue. ADB works fine, but no device is listed at all (device manager in win7 or syslog in linux) when connecting the phone in fastboot mode. It's like it wasn't physically connected at all.
Click to expand...
Click to collapse
Try changing ports / connect to another pc
Install proper drivers .
Is your bl unlocked now ?
Got it to work under win7 with great help from this post.
What I did was:
Update to the latest miui version (to MIUI Global 11.0.3, as prompted in system settings, I hadn't bothered to update because I just want to throw miui out)
Disable OEM unlock
Reboot
Enable OEM unlock again
Reboot into fastboot
Then the phone showed up as an unknown device in Device Manager
Right clicked the device and updated the driver, chose to search for drivers in the miflash_unlock-en-3.5.1108.44\driver\xp-win7-win8 folder
The device now lists as an Android Bootloader Interface device
And now:
$ fastboot devices
e150445 fastboot
MiFlash unlock detects the phone, and I could proceed with unlocking. Still have to wait though. Tried the older-version-trick as suggested here, but that just told me to update to the latest version. Guess I'll have to wait a week then...
Hope this helps someone. This is the most tedious unlocking procedure I've encountered so far...

Categories

Resources