Hi guys,
I was wondering if you could help me. I need to send my HTC for repairs but obviously I have voided the warranty due to rooting it. I understand that I need an RUU? However I cannot find one for my H3G phone.
Please could you advise me on what I should do/any more information you need to help me.
Thank you very much
smithamb said:
Hi guys,
I was wondering if you could help me. I need to send my HTC for repairs but obviously I have voided the warranty due to rooting it. I understand that I need an RUU? However I cannot find one for my H3G phone.
Please could you advise me on what I should do/any more information you need to help me.
Thank you very much
Click to expand...
Click to collapse
Please post the output of your fastboot 'getvar all'
raghav kapur said:
Please post the output of your fastboot 'getvar all'
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.771.17
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH34HW901190
(bootloader) imei: 354436055263170
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3862mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
raghav kapur said:
Please post the output of your fastboot 'getvar all'
Click to expand...
Click to collapse
Bump
smithamb said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.771.17
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH34HW901190
(bootloader) imei: 354436055263170
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3862mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ae8bbb39
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Ahhh, you're S-OFF. Good
This is the guide:
http://forum.xda-developers.com/showthread.php?t=2541082
This is the link for the RUU:
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/
Please read the guide carefully. The M7 CWM Nandroid Backup is the one which concerns you.
raghav kapur said:
Please post the output of your fastboot 'getvar all'
Click to expand...
Click to collapse
raghav kapur said:
Ahhh, you're S-OFF. Good
This is the guide:
http://forum.xda-developers.com/showthread.php?t=2541082
This is the link for the RUU:
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/
Please read the guide carefully. The M7 CWM Nandroid Backup is the one which concerns you.
Click to expand...
Click to collapse
Does it matter if I am using twrp instead of Cwm?
smithamb said:
Does it matter if I am using twrp instead of Cwm?
Click to expand...
Click to collapse
Not at all. But the guide explains the CWM method better IMO. But if you wanna go ahead with TWRP, there are no issues. I hope you have the correct TWRP RUU though.
smithamb said:
Does it matter if I am using twrp instead of Cwm?
Click to expand...
Click to collapse
raghav kapur said:
Not at all. But the guide explains the CWM method better IMO. But if you wanna go ahead with TWRP, there are no issues. I hope you have the correct TWRP RUU though.
Click to expand...
Click to collapse
you can't restore a CWM nandroid using TWRP or vice versa
nkk71 said:
you can't restore a CWM nandroid using TWRP or vice versa
Click to expand...
Click to collapse
Is there a way to go from twrp to Cwm?
nkk71 said:
you can't restore a CWM nandroid using TWRP or vice versa
Click to expand...
Click to collapse
Is there a way to go from twrp to Cwm?
smithamb said:
Is there a way to go from twrp to Cwm?
Click to expand...
Click to collapse
same way as you got TWRP on there you just flash it.
the guide makes no assumptions about what state your phone is in, other than the ones mentioned, so please read all of it (at least once or twice), there is also a walk-through in post #8 as to what you can expect, use CWM method
Post #1, post #2, post #5 using the following:
ruu.zip: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
....... AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
nandroid: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/ (actual version is 1.28.771.6)
stock recovery: http://d-h.st/Vg2#.U4deuiiMrg4 (this should avoid the "freezing" part for your situation)
make sure to check MD5 on all your downloads!!
read post #8 for a visual, once you are comfortable following the guide proceed, if you are not comfy with it (or think you can skip a few steps), then please do not, ask instead.
Related
Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Raidorz said:
Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Click to expand...
Click to collapse
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
clsA said:
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If I'm not wrong it's CWM 6.0.4.3. And I downloaded the RUU based on my region before.
Sorry I'm still new about using forums!
Raidorz said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Remove Me
(bootloader) imei: Remove Me
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Sorry I'm still new about using forums!
Click to expand...
Click to collapse
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
clsA said:
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Raidorz said:
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Click to expand...
Click to collapse
Try this for s-off >> http://firewater-soff.com/
clsA said:
Try this for s-off >> http://firewater-soff.com/
Click to expand...
Click to collapse
Problem is I cant boot into android
Raidorz said:
Problem is I cant boot into android
Click to expand...
Click to collapse
sideload a rom like ARHD 31.6 and try
Hello
Thank you for viewing my post, I flashed ElementalX kernel on my HTC One but something did not go as expected.. I'm experiencing FC in all apps afater that, I reflashed it again but now the battery drains a lot... I wanna reflash the stock kernel but I don´t know if it I can flash it by separate of the Operative System, I mean just flash the kernel not the OS.
Any help will be thanked
just_one said:
Hello
Thank you for viewing my post, I flashed ElementalX kernel on my HTC One but something did not go as expected.. I'm experiencing FC in all apps afater that, I reflashed it again but now the battery drains a lot... I wanna reflash the stock kernel but I don´t know if it I can flash it by separate of the Operative System, I mean just flash the kernel not the OS.
Any help will be thanked
Click to expand...
Click to collapse
just flash your ROM without wipe
Ok just one more question
kamilmirza said:
just flash your ROM without wipe
Click to expand...
Click to collapse
You mean fastboot oem RebootRuu>fastboot flash zip zipname.zip?
just_one said:
You mean fastboot oem RebootRuu>fastboot flash zip zipname.zip?
Click to expand...
Click to collapse
you can flash RUU only when you are S-OFF
which RUU are you going to use?
post the output of "fastboot getvar all" from bootloader, remove S/N & IMEI before posting
Here are
kamilmirza said:
you can flash RUU only when you are S-OFF
which RUU are you going to use?
post the output of "fastboot getvar all" from bootloader, remove S/N & IMEI before posting
Click to expand...
Click to collapse
Damn I erased my RUU I found it here, well I will look for it or if you now where is it by hand I will appreciatte
My results are:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: +++++++++++
(bootloader) imei: ++++++++++++++
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
just_one said:
Damn I erased my RUU I found it here, well I will look for it or if you now where is it by hand I will appreciatte
My results are:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: +++++++++++
(bootloader) imei: ++++++++++++++
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
you can try THIS or THIS or THIS
1 more question
kamilmirza said:
you can try THIS
Click to expand...
Click to collapse
Thanks for the help one more question: the link that you gave is referred to M7_UL and mine is M7_U. Is there a problem if I flash it in my HTC?
Thanks again!
just_one said:
Thanks for the help one more question: the link that you gave is referred to M7_UL and mine is M7_U. Is there a problem if I flash it in my HTC?
Thanks again!
Click to expand...
Click to collapse
no there will be no problem :good:
my device is also M7_U and i can flash all M7_UL ROMs with no worries
review my post with links again
Thanks
kamilmirza said:
no there will be no problem :good:
my device is also M7_U and i can flash all M7_UL ROMs with no worries
review my post with links again
Click to expand...
Click to collapse
Officially thanks dude!
So first thing I ****ed up I didnt make a backup of my stock when I got into this.I am a complete noob/beginner so :/.I have been using cyanogen mod which I installed following the guide on the sidebar of /r/Android.It worked fine but I miss stock too much.Stock camera is the biggest reason I want stock back.Now I downloaded stock rom from back to stock thread and it didnt work presumably because I have s-on.Same thing with androidrevolutionhd 81.I tried getting s-off but then I realized my hboot is 1.57.Would really appreciate help And this whole thing wouldnt be necessary if I could get stock camera on any rom that doesnt require s-off.That thing is so much better for the pictures I take compared to google play apps.
medo357 said:
So first thing I ****ed up I didnt make a backup of my stock when I got into this.I am a complete noob/beginner so :/.I have been using cyanogen mod which I installed following the guide on the sidebar of /r/Android.It worked fine but I miss stock too much.Stock camera is the biggest reason I want stock back.Now I downloaded stock rom from back to stock thread and it didnt work presumably because I have s-on.Same thing with androidrevolutionhd 81.I tried getting s-off but then I realized my hboot is 1.57.Would really appreciate help And this whole thing wouldnt be necessary if I could get stock camera on any rom that doesnt require s-off.That thing is so much better for the pictures I take compared to google play apps.
Click to expand...
Click to collapse
you don't need s-off to flash ARHD 81. You are probably using the wrong recovery to flash it. What recovery version are you using?
your "fastboot getvar all" could also help
alray said:
you don't need s-off to flash ARHD 81. You are probably using the wrong recovery to flash it. What recovery version are you using?
your "fastboot getvar all" could also help
Click to expand...
Click to collapse
I tried with both clockwork 6.0.4.6 , twrp 2.7.1.2 and twrp 2.8.0.2
this is getvar all
C:\mini-sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4111mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
medo357 said:
I tried with both clockwork 6.0.4.6 , twrp 2.7.1.2 and twrp 2.8.0.2
this is getvar all
C:\mini-sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4111mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Try with twrp 2.6.3.3 and remove imei and serialno from you previous post
alray said:
Try with twrp 2.6.3.3 and remove imei and serialno from you previous post
Click to expand...
Click to collapse
thanks will try and give results in 5 minutes.what could someone do with my imei and serialno ?
alray said:
Try with twrp 2.6.3.3 and remove imei and serialno from you previous post
Click to expand...
Click to collapse
would you be so kind to provide a twrp 2.6.3.3 link ? I cant seem to find it.Links have been removed from xda threads.
medo357 said:
what could someone do with my imei and serialno ?
Click to expand...
Click to collapse
Cloning your phone...
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
medo357 said:
would you be so kind to provide a twrp 2.6.3.3 link ? I cant seem to find it.Links have been removed from xda threads.
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
official link from twrp website
I succeded thanks man I give you thanks !
medo357 said:
I succeded thanks man I give you thanks !
Click to expand...
Click to collapse
you are welcome
Hello,
Today I've been trying to unlock and root my HTC one M7. I was able to unlock the phone, but as I imported the SuperSU file the phone stopped working; I am now able to only load the white power screen, and a black screen is shown after that. I'd appreciate any help, thank you!
FalseFruit said:
Hello,
Today I've been trying to unlock and root my HTC one M7. I was able to unlock the phone, but as I imported the SuperSU file the phone stopped working; I am now able to only load the white power screen, and a black screen is shown after that. I can load the bootloader but not the recovery menu. I'd appreciate any help, thank you!
Click to expand...
Click to collapse
You most likely have used an outdated version of supersu. 2.46 is the version you want to use on lollipop (assuming you are on lollipop). Reflash your custom recovery and try to flash Su 2.46 and see if your phone can boot, otherwise you'll have to reflash your rom.
alray said:
You most likely have used an outdated version of supersu. 2.46 is the version you want to use on lollipop (assuming you are on lollipop). Reflash your custom recovery and try to flash Su 2.46 and see if your phone can boot, otherwise you'll have to reflash your rom.
Click to expand...
Click to collapse
Thanks so much for your reply! I actually am using Su 2.46, but which version of Clockworkmod Recovery should I use?
FalseFruit said:
Thanks so much for your reply! I actually am using Su 2.46, but which version of Clockworkmod Recovery should I use?
Click to expand...
Click to collapse
And sorry, where could I get the AT&T rom? I'm sorry, I'm relatively inexperienced with this.
FalseFruit said:
Thanks so much for your reply! I actually am using Su 2.46, but which version of Clockworkmod Recovery should I use?
Click to expand...
Click to collapse
Latest twrp or cwm from their website.
FalseFruit said:
And sorry, where could I get the AT&T rom? I'm sorry, I'm relatively inexperienced with this.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove emei and serialno)
alray said:
Latest twrp or cwm from their website.
Post the output of "fastboot getvar all" (remove emei and serialno)
Click to expand...
Click to collapse
I've just unbricked the phone, thanks for all your help!
But one question, I've used the stock m7 ROM, am I able to update from that, or do I need to use a different ROM to get the most recent version of HTC Sense?
FalseFruit said:
I've just unbricked the phone, thanks for all your help!
But one question, I've used the stock m7 ROM, am I able to update from that, or do I need to use a different ROM to get the most recent version of HTC Sense?
Click to expand...
Click to collapse
post the output of "fastboot getvar all" and a link to the rom you have flashed.
alray said:
post the output of "fastboot getvar all" and a link to the rom you have flashed.
Click to expand...
Click to collapse
Here's the ROM I used. How do I enter "fastboot getvar all"? Is that in CMD?
FalseFruit said:
Here's the ROM I used. How do I enter "fastboot getvar all"? Is that in CMD?
Click to expand...
Click to collapse
yes
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4M.32.3218.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.23.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3A9W903682
(bootloader) imei: 354439058531924
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
alray said:
yes
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4M.32.3218.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.23.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3A9W903682
(bootloader) imei: 354439058531924
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
alray said:
yes
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4M.32.3218.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.23.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3A9W903682
(bootloader) imei: 354439058531924
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
FalseFruit said:
(bootloader) version-main: 7.23.502.1
Click to expand...
Click to collapse
Your firmware is 7.23.502.1 but you have flashed an old 4.18.502.7 rom. Use the 7.23.502.1 RUU so your firmware and software version match together. Since its an at&t phone, you also need and at&t sim card to receive ota updates.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
alray said:
Your firmware is 7.23.502.1 but you have flashed an old 4.18.502.7 rom. Use the 7.23.502.1 RUU so your firmware and software version match together. Since its an at&t phone, you also need and at&t sim card to receive ota updates.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Click to expand...
Click to collapse
Thank you so much! Can I download the .exe file released by HTC for that RUU?
FalseFruit said:
Thank you so much! Can I download the .exe file released by HTC for that RUU?
Click to expand...
Click to collapse
yes, either the zip or exe is fine.
alray said:
yes, either the zip or exe is fine.
Click to expand...
Click to collapse
Thanks again for all of your help, I couldn't have done this without you! I tried to run HTC's .exe file listed here but for some reason it is unable to install the rom.
FalseFruit said:
Thanks again for all of your help, I couldn't have done this without you! I tried to run HTC's .exe file listed here but for some reason it is unable to install the rom.
Click to expand...
Click to collapse
And for some reason, my battery seems to be discharging faster than it used to before the different ROM and the root. Does this usually happen?
alray said:
Your firmware is 7.23.502.1 but you have flashed an old 4.18.502.7 rom. Use the 7.23.502.1 RUU so your firmware and software version match together. Since its an at&t phone, you also need and at&t sim card to receive ota updates.
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Click to expand...
Click to collapse
I tried to install the .exe again; do I need to relock my bootloader to install it? (fastboot oem lock right?)
FalseFruit said:
I tried to install the .exe again; do I need to relock my bootloader to install it? (fastboot oem lock right?)
Click to expand...
Click to collapse
Yes, if S-ON, bootloader must be locked or re-locked to flash a RUU.
Thanks! And I just flash the unlock code when finished?
I bought an HTC one m7 a few years back in india. So i was searching for the stock rom.I found an ruu on htc website but the website region was for US ? Can i install that ruu in my indian version phone? In htc india website ,they have not provided any link for any HTC roms for any phone.HTC has provided ruu's only for the US region.
Also searching for the stock rom on other websites ,i found a ruu for asia version? Now can i install this ruu on my phone or do i have to search for india ruu ? What i mean is that is the asian version ruu valid for all asian htc phones or do i have to search for an ruu for my specific country?
I would really appreciate it if anyone would answer all my questions as i am confused a lot and i really need help in this matter.
First, run the 'fastboot getvar all' command. You will see what squeaks in the grass
Gumka1977 said:
First, run the 'fastboot getvar all' command. You will see what squeaks in the grass
Click to expand...
Click to collapse
I have cid .720.xx. it is of India region
I just need help regarding the above matter
first time you should check your device is international , Sprint or , verizion or AT&T version then you can choose your rom.
my device 's international so I can use Asian & EUro
crownvn said:
first time you should check your device is international , Sprint or , verizion or AT&T version then you can choose your rom.
my device 's international so I can use Asian & EUro
Click to expand...
Click to collapse
How to check if my device is international or not?is it mentioned in fastboot?
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
Read my post and give us the answer to the command (copy - paste). We'll tell you what's next.
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
run the 'fastboot getvar all' command. it also show full info.
can you also find info on back side of device , such as my devise is PN07110 ( International) or info after run 'fastboot getvar all' command :
Modelid : PN0711000
Cidnum: HTC_044
then you can check attachment .
https://www.upsieutoc.com/image/info-m7.G8pGlC
Gumka1977 said:
Read my post and give us the answer to the command (copy - paste). We'll tell you what's next.
Click to expand...
Click to collapse
Sorry for the late reply. here as the command result-
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**^%$#^904
(bootloader) imei: 354435$#%^**^@
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4090mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please help me find my stock ruu
crownvn said:
run the 'fastboot getvar all' command. it also show full info.
can you also find info on back side of device , such as my devise is PN07110 ( International) or info after run 'fastboot getvar all' command :
Modelid : PN0711000
Cidnum: HTC_044
then you can check attachment .
https://www.upsieutoc.com/image/info-m7.G8pGlC
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
$urajM said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
Click to expand...
Click to collapse
You should not create 2 threads for the same purpose as explained in forum rule #5 https://forum.xda-developers.com/announcement.php?a=81 Just saying because it's easier for everyone (the person requesting help and members) if the discussion take place in a single thread.
https://forum.xda-developers.com/htc-one/general/flashing-stock-rom-t3877100
The M7_u is similar to the international variant M7_ul, the difference is the M7_u lacking LTE radio
Your phone is S-ON (you said it was S-OFF in your other thread.
Link for the RUU in your Q&A thread.
You should request this thread to be removed or moved to the Q&A section, questions should not be posted in the Dev section (see sticky thread)
alray said:
You should not create 2 threads for the same purpose as explained in forum rule #5 https://forum.xda-developers.com/announcement.php?a=81 Just saying because it's easier for everyone (the person requesting help and members) if the discussion take place in a single thread.
https://forum.xda-developers.com/htc-one/general/flashing-stock-rom-t3877100
The M7_u is similar to the international variant M7_ul, the difference is the M7_u lacking LTE radio
Your phone is S-ON (you said it was S-OFF in your other thread.
Link for the RUU in your Q&A thread.
You should request this thread to be removed or moved to the Q&A section, questions should not be posted in the Dev section (see sticky thread)
Click to expand...
Click to collapse
I am so sorry. What I meant so ask was for someone to explain me my phone variant and version along with my fastboot getvar all command..I will correct my question in my next post.
I have uploaded my "fastboot getvar all" results in page-1. Can someone now tell me about my phone variant and version so that next time I flush my rom I have an idea of the ruu file name (like "wwe', "l50","mr").In other words what do words like this mean?
$urajM said:
How to check if my device is international or not?is it mentioned in fastboot?
Click to expand...
Click to collapse
$urajM said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA#$%&*&^$904
(bootloader) imei: 354435*&^@#
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Can you give me info about my device? Is it international ? Also I would appreciate if you could provide links for the .ruu file for my phone.
PS- Sorry for the late reply.
Click to expand...
Click to collapse
your device is same mine. now I am running this rom. it is very smoothly
https://forum.xda-developers.com/showthread.php?t=2183023
if u want .RUU pls read and follow this post
https://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
remember to follow U or UL serial
my device used to run this RUU then upgrade sep by step to sense 6 (7.21.707.151 latest)
7.21.707.105
hTC_Asia_WWE
MID: PN0711000
CID: HTC__038
Link md5: 8b0af326b26a6732fd8a60cb476adaf5
if u want to run 7.1. you can try this . it also smoothly however drain battery faster than 5.0 .2 sense 6
https://forum.xda-developers.com/htc-one/orig-development/rom-xenonhd-5-0-2-beta1-27-12-14-t2986038
hope that it help you :highfive:
crownvn said:
your device is same mine. now I am running this rom. it is very smoothly
https://forum.xda-developers.com/showthread.php?t=2183023
if u want .RUU pls read and follow this post
https://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
remember to follow U or UL serial
my device used to run this RUU then upgrade sep by step to sense 6 (7.21.707.151 latest)
7.21.707.105
hTC_Asia_WWE
MID: PN0711000
CID: HTC__038
Link md5: 8b0af326b26a6732fd8a60cb476adaf5
if u want to run 7.1. you can try this . it also smoothly however drain battery faster than 5.0 .2 sense 6
https://forum.xda-developers.com/htc-one/orig-development/rom-xenonhd-5-0-2-beta1-27-12-14-t2986038
hope that it help you :highfive:
Click to expand...
Click to collapse
Thanks a lot. By the way do you happen to know any KitKat custom ROM links that still work for this phone? (4.4.2 or 4.4.3,4.4.4)
I used to run
https://forum.xda-developers.com/htc-one/development/rom-4-4-3-sense-6-6-09-401-5-100-stock-t2854300
https://forum.xda-developers.com/showthread.php?t=2788150
HD rom
all of them is stable
$urajM said:
Thanks a lot. By the way do you happen to know any KitKat custom ROM links that still work for this phone? (4.4.2 or 4.4.3,4.4.4)
Click to expand...
Click to collapse
FYI
4.4.3 RUU that I ran last some year
https://drive.google.com/file/d/1pIDx_F1fG3OyDcO76likozVaLJuS7jM8/view?usp=sharing
crownvn said:
FYI
4.4.3 RUU that I ran last some year
https://drive.google.com/file/d/1pIDx_F1fG3OyDcO76likozVaLJuS7jM8/view?usp=sharing
Click to expand...
Click to collapse
I downloaded a ruu (5.0.2) .Here is the link.This is the only ruu i can run as my device is s-on now.But when i try to flash it using adb i get an error.i tried to extract it and wnrar said the archive is corrupt.I downloaded it again and got the same result.Is there any other ruu i can flash(see from my fastboot getvar all results) or am i adoing something wrong? i have all drivers correctly installed.I checked it and i am sure i am tying the commands correctly.
The eroor is -
error:write_sparse_skip_chunk
and after sometime the bootloader signature check also fails.(I locked my bootloader before flashing)
You need htc_fastboot.exe to correctly flash! Read on the forum. Together with the 'collection of firmware' there is a description.
Gumka1977 said:
You need htc_fastboot.exe to correctly flash! Read on the forum. Together with the 'collection of firmware' there is a description.
Click to expand...
Click to collapse
Thanks alot man.It worked .I was downloading the file again and again as i thought it was corrupt.LOL
So i flashed my stock ruu.When i opened the recovery after that ,it showed a phone icon with arrows and then rebooted into system and factory reset my phone .So do i have to flash my stock recovery before flashing the ruu? I thought the ruu would contain all files for all the partitions? Please help!!!