Note N7000 stuck on Samsung logo after AlBorak Custom Rom - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

i just flashed Custom Rom of Alborak
( Link here -> http://forum.xda-developers.com/showthread.php?t=2274152 )
I Flashed it by wiping data / cache partition / dalvik cache
i used 3 kernels one by one but it is stucking on samsung logo.
( 1.franco kernel
2. philz kernel
3. helloworld kernel )
please help me
Sent from my GT-I9500

preetgurm said:
i just flashed Custom Rom of Alborak
( Link here -> http://forum.xda-developers.com/showthread.php?t=2274152 )
I Flashed it by wiping data / cache partition / dalvik cache
i used 3 kernels one by one but it is stucking on samsung logo.
( 1.franco kernel
2. philz kernel
3. helloworld kernel )
please help me
Sent from my GT-I9500
Click to expand...
Click to collapse
Please try Factory Reset in recovery "Wipe data factory reset" first. If still fails,
1. Flash philz, reboot recovery.
2. Do All Wipes and formats.
3. Flash Rom
4. It should boot

sorry jackwu but nothing worked from your methods
Sent from my GT-I9500

preetgurm said:
sorry jackwu but nothing worked from your methods
Sent from my GT-I9500
Click to expand...
Click to collapse
Wow. Okay First thing first
1. Can you boot into recovery? Otherwise can you boot into download mode?
2. If you can go to recovery, try flashing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed safe kernel with recovery, then reboot recovery again.
3. Do factory wipe reset, followed by "Yes, I want to install a new ROM" Super Wiper.
4. Wipe caches, dalvik cache followed by format data, system, cache, preload in "mount and storage".
5. Flash your rom again, read whether it's installed successfully and reboot system. Otherwise try flashing another TW based rom (DO NOT flash AOSP/ KK roms!)
6. If flashing another rom succeed, that means u might have a bad download. Try redownloading your rom again.
7. By still able to go to either recovery or download mode, your device is still rescueable, so do not worry too much and do lots of searching. I was able to rescue mine when I soft bricked it.
8. IF you can't boot to recovery or still fail to flash any rom, I suggest you flash a stock rom using odin n see if it boots.
9. If and IF everything else fails, I hope @AndroidSlave or @nokiamodeln91 will be able to advice you as both of them are few of the good experienced "doctors".
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Wow. Okay First thing first
1. Can you boot into recovery? Otherwise can you boot into download mode?
2. If you can go to recovery, try flashing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed safe kernel with recovery, then reboot recovery again.
3. Do factory wipe reset, followed by "Yes, I want to install a new ROM" Super Wiper.
4. Wipe caches, dalvik cache followed by format data, system, cache, preload in "mount and storage".
5. Flash your rom again, read whether it's installed successfully and reboot system. Otherwise try flashing another TW based rom (DO NOT flash AOSP/ KK roms!)
6. If flashing another rom succeed, that means u might have a bad download. Try redownloading your rom again.
7. By still able to go to either recovery or download mode, your device is still rescueable, so do not worry too much and do lots of searching. I was able to rescue mine when I soft bricked it.
8. IF you can't boot to recovery or still fail to flash any rom, I suggest you flash a stock rom using odin n see if it boots.
9. If and IF everything else fails, I hope @AndroidSlave or @nokiamodeln91 will be able to advice you as both of them are few of the good experienced "doctors".
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
thanx for your info
but
can you please give me link for PhilZ-cwm6-XXLTA-ATL-5.15.0-signed
and when im going to do format system cache preload it gives error
Sent from my GT-I9500

this is the error i get while formatting preload
Sent from my GT-I9500

preetgurm said:
this is the error i get while formatting preload
Sent from my GT-I9500
Click to expand...
Click to collapse
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. You are on CWM recovery, I don't know why but that CWM isn't able to format preload. Use phil's and all's good to go

Jackwu696 said:
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. You are on CWM recovery, I don't know why but that CWM isn't able to format preload. Use phil's and all's good to go
Click to expand...
Click to collapse
there are 2 files which to download ?
md5 or zip ?
Sent from my GT-I9500

preetgurm said:
there are 2 files which to download ?
md5 or zip ?
Sent from my GT-I9500
Click to expand...
Click to collapse
the md.5 file is for odin, which you can use if you can't access recovery
the zip is for flashing through CWM
Download both just in case, n always keep zip one in your sd card

Jackwu696 said:
the md.5 file is for odin, which you can use if you can't access recovery
the zip is for flashing through CWM
Download both just in case, n always keep zip one in your sd card
Click to expand...
Click to collapse
i get error only in format preload
dont know why ?
please help
Sent from my GT-I9500

preetgurm said:
i get error only in format preload
dont know why ?
please help
Sent from my GT-I9500
Click to expand...
Click to collapse
Is that on phil's recovery? I don't think it's supposed to look like that. Anyway, just flash philz first, reboot to recovery again then do all the format n wipes I stated above
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Is that on phil's recovery? I don't think it's supposed to look like that. Anyway, just flash philz first, reboot to recovery again then do all the format n wipes I stated above
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500

preetgurm said:
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500
Click to expand...
Click to collapse
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..

preetgurm said:
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500
Click to expand...
Click to collapse
The pic you posted doesnot look like Philz recovery... Install the kernel properly then power off the device and boot into recovery again...

Jackwu696 said:
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..
Click to expand...
Click to collapse
i posted the pic of cwm recovery
but i tried after installing philz
but nothing works
Sent from my GT-I9500

preetgurm said:
i posted the pic of cwm recovery
but i tried after installing philz
but nothing works
Sent from my GT-I9500
Click to expand...
Click to collapse
Boot into download mode and install Philz tar XXLTA kernel.. then power off and boot into recovery.

Jackwu696 said:
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..
Click to expand...
Click to collapse
Did you reboot recovery again after installing phils? It's so weird.
Sent from my GT-N7000 using XDA Free mobile app

Related

stuck with samsung logo

HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium

Flashing stock rom, what kernel, safe?

Hi so I am selling my note and need to make it stock again. I have asylum CM10 and was wondering what kerneI I have and it is safe to flash:: linux version 3.0.15-CM-g8e3d42a? Is it safe for me to flash stock 4.0.4? Do I also need to flash another kernel for stock? Big thanks from a noob.
kidio007 said:
Hi so I am selling my note and need to make it stock again. I have asylum CM10 and was wondering what kerneI I have and it is safe to flash:: linux version 3.0.15-CM-g8e3d42a? Is it safe for me to flash stock 4.0.4? Do I also need to flash another kernel for stock? Big thanks from a noob.
Click to expand...
Click to collapse
You're on a safe kernel, it should be fine to flash straight to 4.04, but you'll need to do full wipes in cwm before and after flash.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You're on a safe kernel, it should be fine to flash straight to 4.04, but you'll need to do full wipes in cwm before and after flash.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Overkill but that is fine...no chance of issues if u do all that
Sent from my GT-N7000 using Tapatalk 2
kidio007 said:
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Click to expand...
Click to collapse
before you do that connect to PC and delete whatever you can then move to recovery
I also recommend you format your internal sdcard in recovery, after saving whatever you need. This way you ensure there's no personal data left which any app might have left.
kidio007 said:
Thanks! So i do this before and after?
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Format /system
Click to expand...
Click to collapse
Dont wipe/factory reset after u flash ICS..u will hard brick ur phone..do all the above & then flash ICS..thats all..
Ok so I downloaded the rom and followed instructions on this page: http://forum.xda-developers.com/showthread.php?t=1424997
Now my note is stuck on samsung logo, what do i do? been like it for 20 mins.
Which ROM?
what kernel do u have installed? Completely stock?
Did you use PC Odin method?
Please give every bit of info you can think of so we can help
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Which ROM?
what kernel do u have installed? Completely stock?
Did you use PC Odin method?
Please give every bit of info you can think of so we can help
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Kernel is: linux version 3.0.15-CM-g8e3d42a
Rom i flashed: N7000XXLRI---4.0.4/12.07.17-N7000NEELP4---Download--- Nordic countries
I first went into cwm and did full wipe, then i used odin method like it said in that thread. I loaded the md5 file and put note in download mode. it said "Pass" and note rebooted.
I also now tried to flash the same rom in cwm (I put the .rar file in root of internal memory), i get an error right away says (bad) and failed. is it wrong rom?
kidio007 said:
Kernel is: linux version 3.0.15-CM-g8e3d42a
Rom i flashed: N7000XXLRI---4.0.4/12.07.17-N7000NEELP4---Download--- Nordic countries
I first went into cwm and did full wipe, then i used odin method like it said in that thread. I loaded the md5 file and put note in download mode. it said "Pass" and note rebooted.
I also now tried to flash the same rom in cwm (I put the .rar file in root of internal memory), i get an error right away says (bad) and failed. is it wrong rom?
Click to expand...
Click to collapse
Flash a safe kernel and the wipe data.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
Flash a safe kernel and the wipe data.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I downloaded the hydracore kernel, but when I now try to go into cwm I get Android System Recovery, how can I flash the kernal without cwm and I cant start phone?
[/COLOR]DO THIS - it will work. Download Philz kernel (it is safe to wipe from)...it is essentially a stock kernel with cwm and removes brick bug...
You can flash it from android stock recovery.
wipe data dalvic and cache... reboot you should be good..
If you want to remove root...install mobile Odin and ref lash your stock ROM with wipe and don't check root
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 12:20 AM ---------- Previous post was at 12:15 AM ----------
NOTE- Im pretty sure flashing philz from Odin will give a yellow triangle...so flash from stock android recovery if you can. Otherwise you will have to use triangle away
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
[/COLOR]DO THIS - it will work. Download Philz kernel (it is safe to wipe from)...it is essentially a stock kernel with cwm and removes brick bug...
You can flash it from android stock recovery.
wipe data dalvic and cache... reboot you should be good..
If you want to remove root...install mobile Odin and ref lash your stock ROM with wipe and don't check root
Sent from my GT-N7000 using Tapatalk 2
---------- Post added at 12:20 AM ---------- Previous post was at 12:15 AM ----------
NOTE- Im pretty sure flashing philz from Odin will give a yellow triangle...so flash from stock android recovery if you can. Otherwise you will have to use triangle away
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I flashed philz safe kernel from stock android recovery. When I rebooteded it gets to the first samsung logo I see white lines on screen and it turns off. So cant do anything now.
Did u use the correct philz kernel for ur built number?
Sent from my GT-N7105, at the corner of this rounded earth.
Not only what antique says (which is CRUCIAL).can you boot into recovery with power volume up home?
If none of this works you are going to need to download dr.ketan's prerooted GB ROM and flash that. With PC odin..because since its GB you can do a factory reset in stock recovery and there is no risk of bricking your phone... then use mobile Odin to flash LRI
Sent from my GT-N7000 using Tapatalk 2
antique_sonic said:
Did u use the correct philz kernel for ur built number?
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
No I just used the latest: PhilZ-cwm6 v3.65 with CWM 6.0.1.9 based recovery
On back of phone it says N7000GSMH
I can enter download mode, but not android recovery.
I have no idea what to do or what of the Philz kernal to use. :/
asf58967 said:
Not only what antique says (which is CRUCIAL).can you boot into recovery with power volume up home?
If none of this works you are going to need to download dr.ketan's prerooted GB ROM and flash that. With PC odin..because since its GB you can do a factory reset in stock recovery and there is no risk of bricking your phone... then use mobile Odin to flash LRI
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Is it the roms in STOCK ROMS THREAD saying "Older Gingerbread ROMs (Directly Rootable)
These all are stock ROMs and this can be flashed using PC odin without exclamation mark or raising flash counter"?
I am not sure about the triangle for those... can anyone else chime in on this please? Nokia spyder do u guys know?
If you want you can flash a stock kernel ICSand get recovery back..or ref lash LRI and then get the proper philz flashed through stock recovery...
I mean I have used triangle away many times without a problem...but definitely avoid the triangle if you can...
asf58967 said:
I am not sure about the triangle for those... can anyone else chime in on this please? Nokia spyder do u guys know?
If you want you can flash a stock kernel ICSand get recovery back..or ref lash LRI and then get the proper philz flashed through stock recovery...
I mean I have used triangle away many times without a problem...but definitely avoid the triangle if you can...
Click to expand...
Click to collapse
Phillz kernel won't raise counter, and yes if you need to go back to stock kernel you can just flash with pc Odin without raising counter.
Sent from my GT-N7000 using xda premium

[Q] about ROM JB Zaiben by Siauka

Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
After the procedures you should install, not install and after wipe data etc... etc...
Sent from my LG-P880 using xda app-developers app
Big mistake !
UncleRipper said:
Hi all,
I have a problem with this ROM
http://forum.xda-developers.com/showthread.php?t=2203700
I install the .zip file with CMW.
After wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system I reboot.
And the phone does not boot.
It stops at the LG logo.
Any solutions?
I tried also with TWRP
Click to expand...
Click to collapse
Dude 1st: format/wipe everything
2nd: install/flash rom
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
UncleRipper said:
still nothing...
I install it again without re-flashing kdz
is it right?
or I need to flash the kdz, wipe all then install?
now I use TWRP recovery.
Click to expand...
Click to collapse
Probably now you have some kind of tutti-frutti of files in your phone...
Better flash your phone with .kdz or other method, after that follow the tutorial.
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
exFAT said:
Did you flash from ICS? You need to be on V20 (JB) before you flash it.
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
UncleRipper said:
Yes, of course I am on v20a ROM. I have unlock he bootloader and install unsecure boo and the TWRP recovery.
Click to expand...
Click to collapse
Oh, just realised you stated you formatted system. You're not supposed to do that since /system contains the ROM, so it wouldn't boot past kernel logo.
Sent from my LG-P880 using Tapatalk 2
R: [Q] about ROM JB Zaiben by Siauka
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Then what I could do?
Now I am on v20a with TWRP installed.
I need to reboot into recovery, do a factory reset, system wipe, cache wipe, data wipe and then install?
TWRP is the same of CMW?
Thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
"FIRST You need:
Flash to orginal JB 4.1.2 20a
Unlock bootloader
Install CWM 6.0.2.8+unsecure boot http://forum.xda-developers.com/show....php?t=2180138
Install tutorial:
1. Place Z.0.1.zip in to your internal sdcard
2. BACKUP ALL YOUR DATA with CWM Recovery
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
4. Flash Z.0.1.zip from sdcard
5. Done"
R: [Q] about ROM JB Zaiben by Siauka
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Thanks,
but now terminal emulator says that it didn't find the files for recovery and unsecure boot
What to do?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Did you copy them back to internal storage after factory reset???
R: [Q] about ROM JB Zaiben by Siauka
RuedasLocas said:
Did you copy them back to internal storage after factory reset???
Click to expand...
Click to collapse
Yes
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
Yes
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I sugest you to use adb instead of terminal.
Once that you facrtory reseted the phone, check if you didn't forgot nothing... root, etc...
Try install SuperSU if you have Superuser.
R: [Q] about ROM JB Zaiben by Siauka
Thanks
I'll report you back.
Sent from my LG-P880 using xda app-developers app
R: [Q] about ROM JB Zaiben by Siauka
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
UncleRipper said:
hi, I'm back with another problem: how to remove some horribles lines from my screen??
they are appeared after restore from twrp recovery.
but they seems to be an hardware problem...
I don't know
the restore was needed because of another failed flash of the rom in the title of this thread...
thanks
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
If its a hardware issue you should had it before...
You tried to do a clean install?

[Q] Able to get into recovery mode, but nothing appears after Samsung logo

[PROBLEM SOLVED] I flashed the custom ROM directly and everything is up and running! Details are below Thanks everyone!
==========================================================================================================================
Experts please help!
I have been surfing my whole day trying to root my Note I (N7000) and flash a custom ROM.
My kernal is XXLSF and I flashed PhilZ-cwm6-ZCLSF-CHN-5.08.5-signed.zip.
I rebooted it after flashing. The Samsung logo appears but then, it blackens and nothing appear on screen.
Now, I can get into the recovery mode by pressing the volume up, power and home button.
I am planning on flashing a stock ROM from SamMobile. Is it okay? WIll I brick my device? What should I do?
I am so frustrated right now:crying:
Your help is much appreciated. Thank you!
"http://forum.xda-developers.com/showthread.php?t=1746794"
From this post, "None since I switched to the CWM4 and CWM6 recoveries (no more superbrick risks under 4.0.4 ICS kernels, only CWM5.x was affected)"
Should I flash a stock ROM that is under 4.0.4, but not the lastest 4.1.2?
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
nokiamodeln91 said:
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
Click to expand...
Click to collapse
Thank you so much for such prompt reply!!
Really? I can flash a custom ROM without root access?
THANK YOU!!!
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
nokiamodeln91 said:
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
Click to expand...
Click to collapse
Yes! I do have CWM recovery
Should I flash stock ROM and then flash the custom rom([ROM][JB 4.3][AOSPA][AOKP-MR1][CM10.2]P.A.C True All in 1 ROM[Nightlies])?
because I have never updated my Note I, the kernal version is very old.
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
nokiamodeln91 said:
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
Click to expand...
Click to collapse
Thank you for keeping an eye on this post!
I encounter a problem during flashing the custom rom :crying:
Besides, I can't find the option "Format system" while following the steps to flash the custom ROM
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
nokiamodeln91 said:
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
Click to expand...
Click to collapse
AMAZING!!!!
I have finally and successfully boot into my device after nine hours battle with my note I :silly:
But the last eight hours was nothing when comparing with your BIG HELP!
What's weird is that all my photos and data are present
I am 100% sure that I wiped all the data and cache and format data cache
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
nokiamodeln91 said:
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
Click to expand...
Click to collapse
"UI system is forced to stop" appear continuously after changing language from English to Chinese.
Is it true that changing system language will lead to breakdown of system?
THANKS A MILLION!!
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Understood!
Thank you very much for helping me all along! :fingers-crossed:
Please accept my genuinely gratitude for helping a stranger like me!:highfive:
I LOVE YOU!
:thumbup::thumbup::thumbup:
Sent from my GT-I9500 using xda premium

[Q] Flashin rom

When I try to flash Dirty Unicorns 4.4 rom it gets blocked even in CWM & TWRP. What should I do ?
(Sorry for bad english)
What do you mean please explain?
Sent from Mobile
NC4777 said:
What do you mean please explain?
Sent from Mobile
Click to expand...
Click to collapse
The rom doesn't install . Thanks for help
leomatia said:
The rom doesn't install . Thanks for help
Click to expand...
Click to collapse
Tell us something more, what error you get...
Do you have one of latest CWM (like version 6.0.4.5)? (What ROM are you using now?) If not, try installing CM 10.2 first and then 4.4 ROM.
PS. If you have Android =< 4.2 you will get status 7 error on first try when installing Android 4.3+. So after error you have to 'reboot to recovery' and install the ROM again.
Follow this:
Reboot into Recovery
Wipe data/factory reset
Wipe cache partition
Advanced > Wipe dalvik cache
Main menu
Install zip from sdcard
Choose zip from sdcard(internal)
Select your rom zip and confirm
Your phone at this moment may reboot automatically and come into a bootloop or show status 7 error or set_metadata_error so you need to flash the rom again.
Remove battery and reboot into new recovery and then flash the zip.file after that again reboot into recovery wipe everthing and flsah your rom and reboot
Sent from my GT-I9000 using Tapatalk 2
slim 4.3 > KK always works for me.same for downgrading..KK > slim 4.3
AreXe said:
Tell us something more, what error you get...
Do you have one of latest CWM (like version 6.0.4.5)? (What ROM are you using now?) If not, try installing CM 10.2 first and then 4.4 ROM.
PS. If you have Android =< 4.2 you will get status 7 error on first try when installing Android 4.3+. So after error you have to 'reboot to recovery' and install the ROM again.
Click to expand...
Click to collapse
I have CWM 6.0.4.5. I'm on Carbon Rom 4.4 and I have done all wipes needed but when I try to flash the rom it doesn't flash and doesn't show any error. It just stays on flash screen
TeKnoGin said:
Follow this:
Reboot into Recovery
Wipe data/factory reset
Wipe cache partition
Advanced > Wipe dalvik cache
Main menu
Install zip from sdcard
Choose zip from sdcard(internal)
Select your rom zip and confirm
Your phone at this moment may reboot automatically and come into a bootloop or show status 7 error or set_metadata_error so you need to flash the rom again.
Remove battery and reboot into new recovery and then flash the zip.file after that again reboot into recovery wipe everthing and flsah your rom and reboot
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Done everything and still doesn't flash. It doen't show any error either,it just stays on flash screen
Then you could try to revert to stock Gb 2.3.6 using Odin and then use the methods described above by AreXe or OmreJ to update 2.3 > 4.4
Sent from my GT-I9000 using XDA Premium 4 mobile app
Cyrd said:
Then you could try to revert to stock Gb 2.3.6 using Odin and then use the methods described above by AreXe or OmreJ to update 2.3 > 4.4
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will get it a try if it doesn't work on 4.3 either

Categories

Resources