I used to use the netflix on daily basis until about three weeks ago I started to get the following message after a long time displaying the netflix splash screen on my TV: "Humm... It seems we're unable to connect". And then the netflix closes after 10 seconds. Every other chromecast official app works good, but Netflix. I also noted that if I restore the chromecast and launch netflix, everything will work. But if I cast other app, as YouTube for instance, and then return to netflix, I'll get the problem again, requiring another restore.
My chromecast software version is 16664.
Is anyone experiencing the something like that?
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I used to use the netflix on daily basis until about three weeks ago I started to get the following message after a long time displaying the netflix splash screen on my TV: "Humm... It seems we're unable to connect". And then the netflix closes after 10 seconds. Every other chromecast official app works good, but Netflix. I also noted that if I restore the chromecast and launch netflix, everything will work. But if I cast other app, as YouTube for instance, and then return to netflix, I'll get the problem again, requiring another restore.
My chromecast software version is 16664.
Is anyone experiencing the something like that?
Click to expand...
Click to collapse
Just to confirm, you're not using any DNS relocation/redirection (Unlocator, Unotelly, etc), right?
I just used Netflix the other day, and I'm still on 16664.
It's weird that everything else works except for Netflix, and also weird that factory reset makes it work. Could be a bug or perhaps something with WiFi connectivity. You don't have a WiFi repeater or multiple APs using the same SSID do you?
bhiga said:
Just to confirm, you're not using any DNS relocation/redirection (Unlocator, Unotelly, etc), right?
I just used Netflix the other day, and I'm still on 16664.
It's weird that everything else works except for Netflix, and also weird that factory reset makes it work. Could be a bug or perhaps something with WiFi connectivity. You don't have a WiFi repeater or multiple APs using the same SSID do you?
Click to expand...
Click to collapse
I use regular DNS. I also tried different WiFi routers and I always got this issue. Rarely Netflix works without need factory reset.
I was wondering if it could be a problem with the chromecast cache. Do you know a way to clear the cache without factory reseting?
luizm.jr said:
I use regular DNS. I also tried different WiFi routers and I always got this issue. Rarely Netflix works without need factory reset.
I was wondering if it could be a problem with the chromecast cache. Do you know a way to clear the cache without factory reseting?
Click to expand...
Click to collapse
Not that I know of... however, since the Netflix app is stored on Chromecast, there's a small possibility that it's a RAM or NAND issue on your Chromecast itself. If it's not rooted or special in any way, you might want to consider getting it replaced.
Or see if you can borrow another Chromecast to see if the problem is localized to your specific device.
bhiga said:
Not that I know of... however, since the Netflix app is stored on Chromecast, there's a small possibility that it's a RAM or NAND issue on your Chromecast itself. If it's not rooted or special in any way, you might want to consider getting it replaced.
Or see if you can borrow another Chromecast to see if the problem is localized to your specific device.
Click to expand...
Click to collapse
This is new for me. I thought Netflix was loaded online. I'll ask a friend that has chromecast to test mine in his home and and borrow his chromecast.
I'll let you know the results tomorrow.
Thanks
I borrowed a chromecast and first time it worked. After casting YouTube videos and then return to netflix, same thing happened. My friend got everything working great using my chromecast.
The only thing that never changed is my cable modem, but I never change anything on it. Moreover, why this is happening only with netflix and why it works if I factory reset are still a mystery.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I borrowed a chromecast and first time it worked. After casting YouTube videos and then return to netflix, same thing happened. My friend got everything working great using my chromecast.
The only thing that never changed is my cable modem, but I never change anything on it. Moreover, why this is happening only with netflix and why it works if I factory reset are still a mystery.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Perhaps you are seeing the first case of Net Neutrality biting you in the ISP?
See if you can reach Netflix via the browser...
I don't think so. I can access netflix anywhere else: tablet, phone, ps3 and computer. Besides, my friend use the same isp.
The only other place I having trouble in access netflix is my old Asus cube that I had retired since I got the chromecast last year.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I don't think so. I can access netflix anywhere else: tablet, phone, ps3 and computer. Besides, my friend use the same isp.
The only other place I having trouble in access netflix is my old Asus cube that I had retired since I got the chromecast last year.
Click to expand...
Click to collapse
Quite the puzzle...
Since your Chromecast works on your friend's network, and your friend's Chromecast shows the same behavior as yours on your network, the breakage factor definitely seems to be something about your network.
I really can't think of your cable modem being an issue unless isn't going bad (if it has an interface, look for excessive errors and/or poor signal quality - for example, Motorola SurfBoards usually have an interface at http://192.168.100.1/).
As your friend is using the same ISP, I would compare your router settings with his - ISP login type, routing and DNS in particular.
Of course if you have different routers then the router itself is still a variable.
I'll try to share my mobile Internet connection as soon I get back home to see if it will do the same.
Also I'll try to look the router log to see something.
Sent from my HTC One_M8 using XDA Free mobile app
I tested chromecast connecting to my phone in tethering mode. Netflix worked everytime. But when I got back to my regular connection, the problem appeared again.
So the problem seems to be located in my cable modem that also is a router.
Sent from my HTC One_M8 using XDA Free mobile app
Ok first question...do you have another router connected to the Modem Router? Are you using the Modem's built in WiFi or this other router's?
If you have another router then chances are likely you have a double NAT situation which is messing you up.
Check your other router and see what IP address is has listed under Internet connection...If it is a 192.168.xxx.xxx then it's a double Nat and you need to call your Cable company and have them put the Modem into Bridge mode.
If you do not have another router and use only the Modem router then you need to call the cable company and have them change the settings on the router to allow multicast and UPnP...Maybe a few other settings as well. Tell them what you are trying to do they have probably gotten lots of calls from others with the same issue.
Me personally I prefer to use my own router and have them put the Modem into Bridge mode so I have full control over the network and don't need to call them whenever I have a problem or want to change settings.
Asphyx said:
Ok first question...do you have another router connected to the Modem Router? Are you using the Modem's built in WiFi or this other router's?
If you have another router then chances are likely you have a double NAT situation which is messing you up.
Check your other router and see what IP address is has listed under Internet connection...If it is a 192.168.xxx.xxx then it's a double Nat and you need to call your Cable company and have them put the Modem into Bridge mode.
If you do not have another router and use only the Modem router then you need to call the cable company and have them change the settings on the router to allow multicast and UPnP...Maybe a few other settings as well. Tell them what you are trying to do they have probably gotten lots of calls from others with the same issue.
Me personally I prefer to use my own router and have them put the Modem into Bridge mode so I have full control over the network and don't need to call them whenever I have a problem or want to change settings.
Click to expand...
Click to collapse
My cable modem a public IP provided by my ISP, and a private IP that is 192.168.0.1. My router has a WAN IP provided by my cable modem (192.168.0.xxx) and a LAN IP 192.168.1.1. My chromecast used to be connected in my router LAN, but I changed it to connect directly to the cable modem router. I'll try to put the cable modem in bridge mode to see what happens as I have full access to its configuration.
Thanks again
luizm.jr said:
My cable modem a public IP provided by my ISP, and a private IP that is 192.168.0.1. My router has a WAN IP provided by my cable modem (192.168.0.xxx) and a LAN IP 192.168.1.1. My chromecast used to be connected in my router LAN, but I changed it to connect directly to the cable modem router. I'll try to put the cable modem in bridge mode to see what happens as I have full access to its configuration.
Thanks again
Click to expand...
Click to collapse
Yep that setup causes a double Nat situation Which doesn't work well for most networking applications....
Especially since you are also dealing with Two different Wireless networks.
Best setup is to have the modem just be a modem and send public IPs to whatever connects to it.
Then you won't have any Nat translation issues PLUS you get the ability (if your Modem has multiple ports like most Modem/Router Hybrids do, You can get a public IP for any device directly connected to the Modem which is good for running servers and for testing router issues.
Problem solved!
I turned off the wifi on the cable modem and put it on bridge mode, letting my router deal with my network. Netflix is now working good on both chromecast and Google tv.
However I believe the problem was related to a still unknown setting in the cable modem as I left it operating alone and netflix was still not able to load.
Thank you very much for the help. I really appreciate it.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
Problem solved!
I turned off the wifi on the cable modem and put it on bridge mode, letting my router deal with my network. Netflix is now working good on both chromecast and Google tv.
However I believe the problem was related to a still unknown setting in the cable modem as I left it operating alone and netflix was still not able to load.
Thank you very much for the help. I really appreciate it.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
it may very well have been a Router issue with the Modem...But now that it is only a Bridge the other router's settings will handle all the communication needed for the CCast and it should work...
As long as the settings on the second router were not the issue in the first place.
Related
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
athorax said:
~20% of the time it works flawlessly.
Click to expand...
Click to collapse
Calls to mind the Anchorman quote: "60% of the time, it works every time."
My first thought is that your AP restricts client-to-client communication, resulting in difficulty communicating between your phone and the Chromecast. However, that doesn't explain the NAT issue you had.
I had some of the same issues with losing controls and not being able to pause or stop a movie/video but the Remote Cast app from the market helped with the loosing controls part. As far as the chromecast losing the network connection unfortunately I ended up hooking up a cheap belkin router in addition to my good router and it works with the belkin just fine without loosing connection.
Sent from my Nexus 4 using xda app-developers app
athorax said:
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
Click to expand...
Click to collapse
Having similar issues. Using Samsung LED TV. Setup seemed ok, but 'casting' anything from my phone is slow and tediously painful, it even seems to make the apps on the phone slower to respond than if they are *not* casting, i.e. Netflix loads quickly and transitions normally, but when I attempt to "cast" the phone app seems to act slow and the TV seems to take almost a full minute to catch up to what I selected from the phone, if at all.
I have a brand new router; My samsung TV is wifi enabled, I just don't use it much. The thought occurs to me that perhaps there is wifi RF interference so I may attempt to disable the samsung's wifi feature tomorrow and see if the Chromecast behaves more responsively.
I had troubles connecting to my Verizon FIOS Actiontec router. But I learned years ago not to fool with that router as it makes other things worse. So, I've had a separate Wifi hotspot for years (just another router with the router stuff turned off) and my Chromecasts (I have 4 of them) work just fine with that. If I were you I'd go to Fry's, or equivalent, and buy a cheap router and set it next to your existing one. Routers go for as cheap as $14.99. The one I use cost about $25. Your life will be much easier.
My experience has been flawless using the Chromecast in two different locations. Both locations have routers and wireless AP's that run either DD-WRT or Tomato however. There doesn't appear to be anything inherently wrong with the Chromecast hardware overall (but you might have a dud unit), but the reliability of it obviously depends on your wireless AP and router equipment.
What equipment are you using for your wireless AP and router?
Haven't had any issues with mine or my friend's. Two different routers, but both setup and run perfectly. Might be a router specific issue.
BrianAllred said:
Haven't had any issues with mine or my friend's. Two different routers, but both setup and run perfectly. Might be a router specific issue.
Click to expand...
Click to collapse
Mine has been flawless. It set up in seconds and works perfectly.
I have been casting a bunch of YouTube and netflix with no issue.
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
athorax said:
I bought my chromecast the day it came out. Since I have gotten it I have had nothing but problems with it.
First, getting it to connect to my WiFi was a complete pain in the ass. It took me 2+ hours and my final solution was to disable NAT, connect the chromecast, then re-enable NAT. So, fine. I got it to connect and it kind of worked.
~20% of the time it works flawlessly.
Now, the other 80% of the time it will say ready to connect and say it is connected to my home WiFi but the chromecast app either says there are no devices or there is a device that needs to be setup. Also, if I manage to get it to work and start playing a movie on netflix, I often lose the control over it during the course of the movie and the only way to stop it from playing is to unplug the dongle.
Has anyone else had this awful of an experience? What would be the cause? I am contemplating going and buying a new router (mine is a modem/wireless router for centurylink MN: C1000a).
Click to expand...
Click to collapse
o2blom said:
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
Click to expand...
Click to collapse
Google has it on their router page but sounds like you're not running the stock firmware, so could be any number of things.
First thing I'd check is UPnP and multicast. If either are blocked/disabled it will cause trouble.
bhiga said:
Google has it on their router page but sounds like you're not running the stock firmware, so could be any number of things.
First thing I'd check is UPnP and multicast. If either are blocked/disabled it will cause trouble.
Click to expand...
Click to collapse
I run a slightly older netgear router with tomato firmware and everything plays fine... I keep UPnP off because (at least on my router's model) I was told it can cause problems.
o2blom said:
I've got about the same experience. Turns out as soon as I start casting my Wifi network performance is reduced to rubble and the Netflix & Youtube apps on my phone freeze up. Without casting pings to the (Asus RT-N66U) router is around 5ms. After casting the pings are all over the place (200ms - 1sec) with lots of dropped packets.
I have 3 out of 4 signal bars on the Chromecast, but the problem appears to be reduced if I bring it closer to the router. Almost seems like a HW problem.
I'm using Shibby's Tomato rev 124 on the router btw.
Click to expand...
Click to collapse
Try turning UPnP off on your router page, as well as turning off Wireless Isolation
Apk07 said:
I run a slightly older netgear router with tomato firmware and everything plays fine... I keep UPnP off because (at least on my router's model) I was told it can cause problems
Click to expand...
Click to collapse
Yeah UPnP really depends. If it works, leave it. If it doesn't, it's worth toggling to see if it makes a difference.
Mine works flawlessly as long as the wireless signal is good. Setup was an snap (have an ATT Uverse/2-Wire router). All I had to do was put in the password and it connected on 1st try.
Used it the other night in the kitchen and I kept losing controls and it kept dropping out before I remembered that the kitchen TV is in a bad spot for wireless. Moved it to another TV and it was rock solid again.
Just bought mine today, setup and use work great. The only thing is no fullscreen casting (the experimental one) and some frame dropping not using it as it was intended (casting a remote desktop tab for fullscreen games).
It may solve some router issues to include an extender or additional bridged router that has it's own SSID. Just in case it's a compatibility issue. It might help to have a clean slate to troubleshoot with.
I had a number of issues originally when first using it, the setup was very hit or miss (kept failing) and I had huge reception issues.
Later Google OTA updates appear to have resolved the setup issues I had on earlier builds and I ended up solving my reception issues by purchasing an HDMI extension cable and migrating my chromecast out of my home theatre cabinet where it was getting impaired wifi signal.
oarking said:
Just bought mine today, setup and use work great. The only thing is no fullscreen casting (the experimental one) and some frame dropping not using it as it was intended (casting a remote desktop tab for fullscreen games).
It may solve some router issues to include an extender or additional bridged router that has it's own SSID. Just in case it's a compatibility issue. It might help to have a clean slate to troubleshoot with.
Click to expand...
Click to collapse
Yes, contrary to what Google might imply, Chromecast does not have to be on the same wireless network as your other wireless devices. As long as they're bridged, it works fine. That's how Chromecast can be on 2.4 GHz WiFi while my phone is on 5 GHz WiFi, and my computer is wired.
The only hard requirement is that for setup, you need a supported device with 2.4 GHz 802.11b, 802.11g, or 802.11n wireless because it needs to connect to the Chromecast's internal access point that is available during setup.
I have the same router just running merlin instead of tomato. No issues with latency.
I did try it at a friends house and they had some netgear router and latency went through the roof for everyone. Unsure exactly what happened but made the entire wifi network lag horribly.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
rans0m00 said:
I have the same router just running merlin instead of tomato. No issues with latency. I am running 3 rt-n66u's though... 1 as a router and 2 ap's... Maybe the load was spread out enough to not bog down one of the boxes?
I did try it at a friends house and they had some netgear router and latency went through the roof for everyone. Unsure exactly what happened but made the entire wifi network lag horribly.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
2237 9525694
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How?
try changing the wifi channel the router uses
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How did you fix this?
MadBob said:
try changing the wifi channel the router uses
Click to expand...
Click to collapse
Good advice.
Remember that the WiFi bands (channels) are not exactly the same between countries. So if you're in a non-US country and your router happens to choose a channel that is not available in the US, Chromecast may not detect your wireless AP.
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
DJames1 said:
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
Click to expand...
Click to collapse
Didn't know that. Thanks! Still applies to other countries though. I think Channel 13 is one of the channels that applies to Europe but not US. I should put it in the FAQ...
EDIT: Seems there's far less exclusion than I thought... but added a note in the FAQ just in case.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Kipp34 said:
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Click to expand...
Click to collapse
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Chromecast in Canada, on Telus
A friend lent me his chromecast. He uses an iphone and Shaw cable. I use a Nexus 4, and have Telus as my internet provider.
It was a bear trying to get chromecast to work. Tried 5 separate days. Got it to work and i could watch netflix/youtube on it about 3 times and played with it for a couple of hours each. That's the success.
The fail is that I had to trouble shoot more then 4+ hours to get it to work those 3 times. Reboot the chromecast. Reboot the router. Reboot my Nexus 4. Try my wife's Nexus 4. Try the Nexus 7 tablet. It was a horrible experience. I got the AP recommendation like the earlier post in this thread. I tried that. Tried calling telus and signed into my router to check that those settings were correct. As far as I understand it's a gateway 11n wireless router.
So my conclusion is change my internet provider to Shaw unless someone has a smart solution to this problem. The router says it's a 50ghz signal? So it isn't the 2.4vs 5.0 ghz signal problem that I've googled and read about.
Please provide some brains to my situation. I've used all of mine up.
bhiga said:
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Click to expand...
Click to collapse
Still not fixed.
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
TVs are great at blocking/scrambling radio signals.
Use the included HDMI extender. If that doesn't help (enough), get an HDMI extension and move Chromecast away from the TV. One of mine is on a 10-foot HDMI extension. The other is connected upstream of a another device that connects to my TV, so both of my Chromecasts are at least a foot away from its associated TV.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
fixed...
Asphyx said:
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
Click to expand...
Click to collapse
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
johnson2423 said:
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
Click to expand...
Click to collapse
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Asphyx said:
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Click to expand...
Click to collapse
I have a friend that is struggling with this as well. While setting up the WiFi connection between the chromecast and the router (the Actiontec V1000H - which is a modem/router combo if that helps). The chromecast will see the WiFi, but it seems to time out while trying to connect to the router.
I did find a comment on a blog somewhere (sorry, I forget where) that suggests unchecking the "IGMP snooping enabled" option in the router (Advanced Settings>IGMP Setting). Once this was done, the chromecast connected to the WiFi without any issues and we were able to stream it without any issues.
However after going out for dinner we had major issues trying to connect to the WiFi on our phones and his laptop (laptop would try to connect to the WiFi but continually fail). It seems like this is a temporary fix at best.
The only permanent solution I can think of at the moment is to go buy a new router that is listed as having no issues on the chromecast compatibility list... Which kind of defeats the whole purpose of having the chromecast as an economic way to stream content to your big screen.
Buy a better router
I don't see why IGMP should have any affect on being able to login and connect.
I Can see it being a problem with streaming but not connection.
IS this an ISP provided Modem/Router? How many devices are connecting wirelessly?
Check settings for IGMP Proxy, Try changing that setting whatever it is but it should probably be disabled (Still don't think this would affect connection but it's worth checking)
Check if UPnP Is enabled (again not really connection related but it does need to be enabled for CCast)
I personally prefer to use a two device setup with separate Modem (in Bridge Mode) and Router....This way the Modem protects the router from the outside world and even if the Modem goes bad the Network still functions properly.
And I pretty much stay away from anything that isn't a Linksys or Netgear product as far as Routers are concerned.
There are a bunch of Actiontec models that are listed as incompatible with CCast on the google site so it's obvious that something about their firmware is not CCast friendly.
So the the previous poster may actually have made a good suggestion in the long run! LOL
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
nolook said:
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
As long as double NAT doesn't cause you problems, you can
Assign the new router's WAN port to an address in the ISP router's LAN range
Set the new router's gateway to the ISP router's LAN address
Connect the two routers LAN port to LAN port
Have all your wired and wireless clients connect to the new router.
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
rozzerhmq said:
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
Click to expand...
Click to collapse
I would reset everything and then try the setup program again if you haven't tried that already.
When you say "changing router settings", does this include channel width? Is it set to auto? Have you tried setting it to something manually, preferably 20MHz? Also what is your Network Mode set to?
mdamaged said:
When you say "changing router settings", does this include channel width? Is it set to auto? Have you tried setting it to something manually, preferably 20MHz? Also what is your Network Mode set to?
Click to expand...
Click to collapse
Yes. I am using the 2.4GHz wireless only
I tried changing all these setting
Mode: abgn
Channel Width: 20mhz-40mhz
Channel: 1 - 6 - 11
rozzerhmq said:
Yes. I am using the 2.4GHz wireless only
I tried changing all these setting
Mode: abgn
Channel Width: 20mhz-40mhz
Channel: 1 - 6 - 11
Click to expand...
Click to collapse
Have you tried using the HDMI extender? That can help a lot in some circumstances. It's amazing how much a TV and other electronics will interfere with WiFi signals.
rozzerhmq said:
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
Click to expand...
Click to collapse
I experience the same problem with you
bhiga said:
Have you tried using the HDMI extender? That can help a lot in some circumstances. It's amazing how much a TV and other electronics will interfere with WiFi signals.
Click to expand...
Click to collapse
I never had problems with my old router. So I'm pretty sure it to be a compatibility issue.
I have the same exact router (TL-WDR4300 but running dd-wrt) and have zero issues connecting my 2 chromecasts to it.
One chromecast is running PwnedCast and the other is vanilla on the most current update. The router is running both 2.4 and 5 ghz and both chromecasts are connected to the 2.4 bandwidth.
I am using the extender on both.
rozzerhmq said:
I never had problems with my old router. So I'm pretty sure it to be a compatibility issue.
Click to expand...
Click to collapse
Well does the Chromecast Light blink or is it solid?
If it is solid then it is connected to the router and you have some security setting or firewall either on the router or the PC isolating it from other devices.
Typical issue is when you have mis-selected Public for your network type in Windows instead of HOME,
Public isolates the Windows machine where HOME allows Device to Device communication.
Check the firewall settings on your router and try shutting it off and see if that works. If so then turn it back on and look for other settings like Multicast filtering or IGMP and uncheck.
If the light on the CCast is Blinking then it is not connected and you need to re-run the setup.
You say other devices are seeing it so thats probably not the case.
j.a said:
I have the same exact router (TL-WDR4300 but running dd-wrt) and have zero issues connecting my 2 chromecasts to it.
One chromecast is running PwnedCast and the other is vanilla on the most current update. The router is running both 2.4 and 5 ghz and both chromecasts are connected to the 2.4 bandwidth.
I am using the extender on both.
Click to expand...
Click to collapse
Thanks for the info. I am using vendor firmware atm, will try dd-wrt next.
Asphyx said:
Well does the Chromecast Light blink or is it solid?
If it is solid then it is connected to the router and you have some security setting or firewall either on the router or the PC isolating it from other devices.
Typical issue is when you have mis-selected Public for your network type in Windows instead of HOME,
Public isolates the Windows machine where HOME allows Device to Device communication.
Check the firewall settings on your router and try shutting it off and see if that works. If so then turn it back on and look for other settings like Multicast filtering or IGMP and uncheck.
If the light on the CCast is Blinking then it is not connected and you need to re-run the setup.
You say other devices are seeing it so thats probably not the case.
Click to expand...
Click to collapse
Update: It turns out this is not the root cause of this issue(refer to my post below), i will try dd-wrt next!
Thanks for the suggestions!
By following your advise and checking my security settings again. I was able to solve this issue by turning off VPN firewalls. I don't use any VPN thing so i thought the VPN firewalls wouldn't matter. Anyways, thank you very much and now I can enjoy Chromecast again!
However, there is one annoying thing. When casting from Chrome tabs, it won't go into full screen. There are black bars on top and bottom which isn't there if I cast from Youtube. I tried changing all the Chromecast extension options and Tv aspect ratio setting, but had no success. It would be awesome if you can offer some advice.
Thanks again!:good:
rozzerhmq said:
Thanks for the suggestions!
By following your advise and checking my security settings again. I was able to solve this issue by turning off VPN firewalls. I don't use any VPN thing so i thought the VPN firewalls wouldn't matter. Anyways, thank you very much and now I can enjoy Chromecast again!
However, there is one annoying thing. When casting from Chrome tabs, it won't go into full screen. There are black bars on top and bottom which isn't there if I cast from Youtube. I tried changing all the Chromecast extension options and Tv aspect ratio setting, but had no success. It would be awesome if you can offer some advice.
Thanks again!:good:
Click to expand...
Click to collapse
Go into Options of the Googlecast ext on your Browser
Select Full screen zoom and make sure it is enabled.
But there will always be some content that doesn't format the screen properly and will give you black bars...
Asphyx said:
Go into Options of the Googlecast ext on your Browser
Select Full screen zoom and make sure it is enabled.
But there will always be some content that doesn't format the screen properly and will give you black bars...
Click to expand...
Click to collapse
Well, after all, it was too early to call it a success.
So earlier today, I wasn't able to discover Chromecast from my PC(It says something like "device missing" in Chromecast extension). However, my TV shows Chromecast is connected to my network, and the light on Chromecast is stable white. Then, I tried to reboot my router, and that fixed it. This is basically similar to the issues i had in the past where i could just fix Chromecast connection by randomly rebooting router and resetting Chromecast.
I was skeptical and decided to revert my changes on VPN firewalls. After a router reboot, Chromecast still worked!!
At this point, I don't think it's the VPN firewall settings that is causing this issue. This issue looks so random. I would try to go dd-wrt next and hopefully it will fix this issue properly.
rozzerhmq said:
Well, after all, it was too early to call it a success.
So earlier today, I wasn't able to discover Chromecast from my PC(It says something like "device missing" in Chromecast extension). However, my TV shows Chromecast is connected to my network, and the light on Chromecast is stable white. Then, I tried to reboot my router, and that fixed it. This is basically similar to the issues i had in the past where i could just fix Chromecast connection by randomly rebooting router and resetting Chromecast.
I was skeptical and decided to revert my changes on VPN firewalls. After a router reboot, Chromecast still worked!!
At this point, I don't think it's the VPN firewall settings that is causing this issue. This issue looks so random. I would try to go dd-wrt next and hopefully it will fix this issue properly.
Click to expand...
Click to collapse
You mention DD-Wrt are you using that?
Cause I notice most people having these issues seem to be using DD-WRT or Tomato and I'm starting to wonder if perhaps there is some issues with those Custom Firmwares being used.
I do know in the past before I Upgraded my router that I had problems with devices getting booted off the WiFi because I had too many devices connecting and it would seem that when a new device would connect, one would stop getting data despite the fact it said it was connected.
Now this shouldn't ever be the case with WiFi if it has an IP it should not have a limit but I am wondering if your experiencing what I was experiencing before I Upgraded....
Not suggesting you need to upgrade mind you just that what your going through sounds similar to what I went through.
When I bought the new router (LinkSys N900) the Box had this chart of Router Groups and which router was best for X number of devices.
Low end for less than 3, High end for 7+ with the last group being for 7+ and HD.
This chart went against what I believed I knew about WiFi limitations which I thought was only IP and DHCP based...
I wrote it off as pure Marketing with the intention of getting you to buy the most expensive router they had...(which I was going to do anyway LOL)
I'm starting to wonder if maybe there is something to that....Sure would explain my problems with the router that made me upgrade in the first place.
I'm having the same issues with my chromecast and a tp-link wdr4300 router on dd-wrt (latest build from 2014-02).
After either chromecast or router (wi-fi) restart I'm able to cast and chromecast is also shown in chromecast app.
But after some idling (without casting) chromecast is still connected to my wi-fi (ping responses) but I'm not able to cast anything (music, allcast etc..) anymore.
I have already tried enabling/disabling UPNP, changing wi-fi channels, etc
Doesn't look like just a wi-fi issue only, as chromecast is still connected to my wi-fi.
but still could this be related to the Atheros chipset used in the wdr4300 maybe?
Any other routers with atheros chipset running without problems?
Try installing Bonjour Browser or another mDNS browser and monitor what happens in local._googlecast._tcp
Also check router security and firewall logs to see if things are being blocked corresponding to when the mDNS broadcasts fall off.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Seems to be good now for my setup.
I had installed a bonjour browser but couldn't see anything special.
local._googlecast._tcp was present all the time even though I couldn't cast.
I have changed the router firmware from dd-wrt (02-19-2014-r23598) to a self compiled OpenWrt (Barrier Breaker r39770).
I have been able to cast now stable for 4 days. Never had that before on dd-wrt.
nervdoc said:
Seems to be good now for my setup.
I had installed a bonjour browser but couldn't see anything special.
local._googlecast._tcp was present all the time even though I couldn't cast.
I have changed the router firmware from dd-wrt (02-19-2014-r23598) to a self compiled OpenWrt (Barrier Breaker r39770).
I have been able to cast now stable for 4 days. Never had that before on dd-wrt.
Click to expand...
Click to collapse
Thanks for the update. Good to know that OpenWRT is working for you.
I have the same router. Don't recall having any issues on stock firmware. I'm on ddwrt now.
Did that as I plan on converting to extender when I move to the AC router soon.
I can only imagine the Chromecast didn't like something in your settings.
Sent from my SPH-L720 using Tapatalk
"Something went wrong. We weren't able to find your chromecast on the network"
[ this trick worked for me ] .. I had the same issue.. I was trying to connect my lcd remote monitor to my windows 7 pc. In the chromecast setup, I was able to go till the page that asked for the wifi network id and pw.., and later i got the error "Something went wrong. We weren't able to find your chromecast on the network" Many tries and all failed. Later i downloaded the chromecast app in my Android 5.0 smart phone and did the settings and voila! .. it got installed in the first try. Later without factory resetting the chromecast, i reinstalled the chromecast setup in my windows 7 and it got installed without any error. Later i opened up the chrome browser installed the chromecast plugin extension and it worked well. I was able to view my page on my remote monitor. Hope it works for u too..
Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
jmikeb92 said:
Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Click to expand...
Click to collapse
If you can give us the exact make and model we might be able to help more.
BTW, TWC changed their policy a few years back and now allow approved customer-owned modems which will save you the modem rental. They used to not charge for the modem rental but also not let you use your own. Installed a Motorola SB6141 for my relative and it's been working great with the Netgear WNDR3700 I put there.
No Chromecast yet because I haven't been by to visit...
You could always use your own modem with twc, just that most people did not know that. Like previously mentioned, more details are needed in order to further assist you. Make and model(tg862g, ddw3611, dvw32011b???). More than likely you just need to call and talk with level 3 tech support. I personally used my own router behind the modem because I do a bit more than normal with my router.
jmikeb92 said:
Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I went through Hell on Christmas Eve with Time Warner....
They have a new Modem/Router they are using....When connected to a personal Router it does a double Nat translation which really doesn't work at all.
Your lucky if you even get Internet access on a Computer with it.
Check your router and see what IP address it has under internet connection. It should not be 192.168.0.x
If it is not an outside IP you need to call support and tell them you need your Router to breach the Modem and have them shut off all ROUTER capability on their Device so that all it does is pass a public IP to whatever is connected to it.
If you get your phone service from Time Warner as well better call on a Cell Phone because they will drop the phone call the second they mess with their Modem/Router and you will suffer through Groundhog day explaining it to the next guy from scratch!
Well guys I solved my own problem in a way. I disabled the wireless broadcast from the TWC Arris router and just connected my old NetGear ( old as in 2 months old) and it seems to work perfectly now. And the installer said, " You won't need to use your old one because this box is like commercial grade bro."
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Glad to hear. The wireless modem you have is indeed a great modem and you could use that alone but it is easier to just use your own. The installer more than likely wasn't on the up and up about the more technical aspects of the modem. You can't knock him for that part as the techs are not trained on a lot of the extra features of the modem. I only know this because I may or may not work for the company(need to keep work out of forums).
shelby04861 said:
I only know this because I may or may not work for the company(need to keep work out of forums).
Click to expand...
Click to collapse
I usually go with "I have a lot of experience with these products"
Since my Chromecast updated to 16664 (official) last week, I have had a bear of a time having any device see the Chromecast. Prior to the upgrade, I didn't have any issues with connectivity. Now the only way I can get the device to work is to do a reset to defaults and go through the setup procedure. The CC will generally work until the next power-up, then the same thing.
When this happens, the ChromeCast's home screen indicates it's connected to my WiFi network, however no Chromecast enabled program, including the Chromecast app on my phone, sees the device.
There have been no changes to my wireless network settings since it worked last. Given that I've not seen anyone else post about this, I must be the only one seeing the problem. Anyone?
I've seen some similar reports over at Plex but not here...
I myself am on 16664 and have no issues seeing my device.
try a Factory reset and see if reconnecting helps at all.
I've had a similar experience. My Galaxy SII and Galaxy tab 3 can see my Chromecast, but when I run the Chromecast app from my Kindle Fire HD, I get the message "No Chromecasts found on <network>". If I do a factory reset on the Chromecast, then the KFHD will find it, but once it's setup, I won't find it again. For me, the solution was to unplug my TiVo Premiere and TiVo Roamio from my network. Then the KFHD can find and cast to the Chromecast. But if either TiVo is connected to my network, the KFHD can't find the Chromecast. It's weird that this only affects the KFHD and not my other android devices.
SFDave said:
I've had a similar experience. My Galaxy SII and Galaxy tab 3 can see my Chromecast, but when I run the Chromecast app from my Kindle Fire HD, I get the message "No Chromecasts found on <network>". If I do a factory reset on the Chromecast, then the KFHD will find it, but once it's setup, I won't find it again. For me, the solution was to unplug my TiVo Premiere and TiVo Roamio from my network. Then the KFHD can find and cast to the Chromecast. But if either TiVo is connected to my network, the KFHD can't find the Chromecast. It's weird that this only affects the KFHD and not my other android devices.
Click to expand...
Click to collapse
TiVos use mDNS advertising for their services.
Recent Chromecast firmware also seems to be using mDNS as well.
Try running Bonjour Browser and see if Chromecast is visible before/after reset or reboot.
Not sure if related but it may help.
My router has 2 channels, 2.4ghz and 5ghz, the chromecast is connected to the 2.4ghz of course, the issue is when another device is also using the 2.4ghz it wont see the chromecast for some strange reason, the second I connect that device to the 5ghz network it will see it and everything will work flawlessly.
kishke said:
Not sure if related but it may help.
My router has 2 channels, 2.4ghz and 5ghz, the chromecast is connected to the 2.4ghz of course, the issue is when another device is also using the 2.4ghz it wont see the chromecast for some strange reason, the second I connect that device to the 5ghz network it will see it and everything will work flawlessly.
Click to expand...
Click to collapse
If your router has a WMM option, try toggling it - on some routers WMM implementation is broken and makes things worse when it tries to kick in and make your media streaming better.
Also, if you're streaming local content from another wireless device you may be exceeding the available bandwidth on the band - see WiFi Bandwidth and Router Considerations for diagrams on how the bandwidth usage can multiply depending on how content is being accessed.
bhiga said:
If your router has a WMM option, try toggling it - on some routers WMM implementation is broken and makes things worse when it tries to kick in and make your media streaming better.
Also, if you're streaming local content from another wireless device you may be exceeding the available bandwidth on the band - see WiFi Bandwidth and Router Considerations for diagrams on how the bandwidth usage can multiply depending on how content is being accessed.
Click to expand...
Click to collapse
Streaming is fine (using plex with pc as dlna) it's just a weird issue that used to happen, haven't noticed it in a while because our phones always connects to the 5ghz network. WMM is on so if it happens again I'll try playing it.
Also I doubt I'm even getting close to the wireless bandwidth cap.
Thanks for your reply tho!
kishke said:
Streaming is fine (using plex with pc as dlna) it's just a weird issue that used to happen, haven't noticed it in a while because our phones always connects to the 5ghz network. WMM is on so if it happens again I'll try playing it.
Also I doubt I'm even getting close to the wireless bandwidth cap.
Click to expand...
Click to collapse
Weird... Might also be a more general network thing like a rogue device with a static IP causing a collision that Chromecast doesn't gracefully recover from, or a multi-interfaced device causing some kind of loop
But yeah, since you have 5 GHz, best to use that and keep your 2.4 GHz usage to a minimum to maximize available bandwidth for Chromecast..
Let me try a few of the suggestions here. I've not had any luck using 2.4 or 5GHz bands on my network...behavior is the same. Also, my router is an ASUS router with Merlin firmware. There is a new thread I've only glanced over, but I'll try some of the things there as well:
http://forum.xda-developers.com/showthread.php?t=2599515
I had to do the factory reset trick again last night so we could watch video on the Chromecast...it obviously hasn't gotten annoying to the point where I'm stopping all other activity until I get it fixed, though. Strange this only started happening after the Chromecast update, but I can no longer remember the sequence of events that go me here (chromecast update, router update, wireless AP added for better wireless coverage, etc).
I've seen similar behavior when there are just too many devices connected to the WiFi at once.
My router maxes out at around 9-10 devices...
Doesn't matter which band they are on either.
But to be sure it isn't an IP conflict I suggest setting DHCP reservations for all your regularly connecting devices to ensure they never get a different IP (especially important to do for servers like Plex) and remove that possibility from the equation.
Just to Add I believe the new 802.11AC Standards solve this problem, But you will need to buy a new router to get it.
Using a bonjour browser, I can see the entry for the Chromecast :
_googlecast._tcp.local.
Bedroom.local.:8009
/192.168.254.193
st = 0
ve = 02
md = Chromecast
ic = /setup/icon.png
id = [a very long number]
fn = Bedroom
ca = 5
Click to expand...
Click to collapse
I'm running the browser that sees that from a Samsung tablet, which is also running the Chromecast setup app that says it can't find the Chromecast.
EDIT: I've tried the factory default recovery method a number of times now. I see the bonjour record go away, then come back after the setup app says I'm ready to cast. All apps can see the Chromecast at that time, then after 3 to 5 minutes, they no longer see the Chromecast. I don't see any difference in the bonjour record when it working from when it's not working.
troycarpenter said:
Using a bonjour browser, I can see the entry for the Chromecast :
I'm running the browser that sees that from a Samsung tablet, which is also running the Chromecast setup app that says it can't find the Chromecast.
Click to expand...
Click to collapse
Just a longshot....But do you have any security software that could be blocking some Apps from communicating with the Network?
It sounds an awful lot like what happens when an AntiVirus Application Monitor has denied access.
Hmm, No, I don't think so.
But I found something interesting. My laptop CAN see the Chromecast, and I can cast Chrome tabs just fine. So far it's only the Android devices that can't see the Chromecast (and at the same time the laptop can). I'm looking for my iPad (I don't use it enough to keep track of it as close as I should) to see if it sees the Chromecast or not.
troycarpenter said:
Hmm, No, I don't think so.
But I found something interesting. My laptop CAN see the Chromecast, and I can cast Chrome tabs just fine. So far it's only the Android devices that can't see the Chromecast (and at the same time the laptop can).
Click to expand...
Click to collapse
That's really odd. Your network has only the ASUS router for wireless, no repeaters or extenders?
-= this post enhanced with bonus mobile typos =-
bhiga said:
That's really odd. Your network has only the ASUS router for wireless, no repeaters or extenders?
-= this post enhanced with bonus mobile typos =-
Click to expand...
Click to collapse
I do have an extender (not a wireless repeater) in place, but it didn't make any difference before the latest Chromecast update. My next step is to try removing the extender, but I don't know if the Chromecast will see the signal coming from the other side of the house (the reason the extender was put in to begin with).
troycarpenter said:
I do have an extender (not a wireless repeater) in place, but it didn't make any difference before the latest Chromecast update. My next step is to try removing the extender, but I don't know if the Chromecast will see the signal coming from the other side of the house (the reason the extender was put in to begin with).
Click to expand...
Click to collapse
It's quite possible that the update changed something about the WiFi connection that your network simply does not like. People have noted similar "introduced issues" with HDMI before. Definitely submit a report with them if you haven't already, and request that updates NOT be forced to avoid issues like this. Being able to dismiss, postpone or even roll back an update would prevent this type of thing.
If it's not the build, I'm not sure what else it might be, unless your router has somehow quarantined your other Android devices on another band or SSID somehow.
bhiga said:
It's quite possible that the update changed something about the WiFi connection that your network simply does not like. People have noted similar "introduced issues" with HDMI before. Definitely submit a report with them if you haven't already, and request that updates NOT be forced to avoid issues like this. Being able to dismiss, postpone or even roll back an update would prevent this type of thing.
If it's not the build, I'm not sure what else it might be, unless your router has somehow quarantined your other Android devices on another band or SSID somehow.
Click to expand...
Click to collapse
Looks like I switched off TKIP and just went AES on that network at some time. I went back and turned on AES+TKIP and now the Chromecast shows up on my mobile devices again. I'll keep an eye out in case that theory doesn't hold out.