is it available?
VarioIII said:
is it available?
Click to expand...
Click to collapse
How to get HTC Sync working
I NEED HTC Sync Software for my PHONE, not my PC
it is possible. i opened a thread few days ago.
I got the files from other ROMs.
Install them in your phone like you install apps
Wait for a while or restatr your phone.
and you need Sync for your PC.
here is the files you need.
doesnt work with APPSInstaller. How do i install it?
Try using command prompt
you must have Sdk tools on your pc
so it can read your phone
go to the directory were this 2 files located unzip them .
easiest way just put them on C: or on D:
than open commad promt from your PC i thik you know what it is
check first does it read your phone type
"adb devices"
it should show you your drvices serial number. if it ok.
type
"adb install sync.apk"
it will install the first file
"adb install pcsii.apk"
it will instal your second file.. and everything will be ok
Thanks, I was looking for this as well.
Just flash my Magic to hofo v1.1.1. Need to sync with PC, thanks for the file.
Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
I'm running Cyanogen 4.0.4
Any ideas?
I'm also looking for a solution to this problem - plenty of rom cookers remove the sync software, but I've yet to find anyone that can tell me how to FIX it.
Like the previous poster, when I install the three required files (sync.apk, pcscii.apk and pcscii.odex), I get the error mentioned. Surely someone has a way to fix this?
Merlinux said:
Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
Click to expand...
Click to collapse
Right. Doesn't work either on a Vodafone Magic with org. ROM same error. You're only able to sync with google apps.
its honestly not worth it
Push Sync software to Sapphire 32A
Hello,
To proceed with RUU from the carrier, the HTC sync connection needs to be estabilished, am I right?
In order to do this, I used the files from the previous poster ruslanriad.
However, It unexpectedly crashes, no matter if I use fastboot install mode or .apk installation through the file browser.
How can I get it up and running?
I'm using Magic Orange 32A with 1.33.2010 HBOOT and 6.35 radio. Current ROM is FroyoRider_Switch_6.35_34_v1.0.
I'm writing this becuase i recently had trouble following other guides rooting my Bell and Virgin (canada) htc Legend with 2.1 on it (2.2 is out here yet)
First follow this guide
[HOWTO] DOWNGRADE to 1.31 which you can then root for Legend 2.1
http://forum.xda-developers.com/showthread.php?t=725430
Click to expand...
Click to collapse
(By now your should have adb set up and your gold card)
If it dosnt downgrade and shows that it fails its okay just move on
After following downgrade guide and it failing install temp root
the best way is to get the apk is to go to this link in the android browser
goo.gl/TcP1o <---Download link to visionary apk
In the web browser open downloads and install the visionary apk
Then connect your phone to your computer open cmd.exe and via adb get root
with cmd.exe
go
Code:
cd c:\AndroidSDK\platform-tools\
for me adb is under platform tools, if you dont update the sdk it is under just tools
then
Code:
adb shell
a # should be at the bottom line, then type in
Code:
su
This gets you root, if it says denied run the visionary app and try again, then
Code:
/data/local/flash_image misc /data/local/misc1-2.img
Then for the actual root
Flash the Rooted ROM1. Download the Rooting Tools
Legend Rooting Tools:
2. Unzip them to the C: drive on your computer (so the file path is C:\r4-legend-root\)
3. Turn off your phone and turn it back on by holding down Back and Power until you see Fastboot come up on the screen. Push the Power button while highlighting Fastboot on the phone and Fastboot should show up in red now on the phone (if it doesn’t push Power again until it does).
4. Plug the phone in via USB cable to the computer.
5. Open the folder you extracted to the C drive and double click “step1-windows.bat” and wait for it to finish.
6. Once you see the menu on the phone come back up, navigate to BOOTLOADER and push power, then navigate to RECOVERY using the volume buttons to navigate and the power button to select and the phone should boot to the ! screen.
7. Now on the computer double click the “step2-windows.bat” file and wait for it to finish. (UPDATE 12.13.10 – You MUST have HTC Sync version 2.0.33 not a newer version for step2 to work. Please uninstall HTC Sync and download and install this version instead, unplug then plug your phone back in, then rerun step2-windows.bat).
8. Now you should see a custom recovery screen, using the optical trackpad navigate to Wipe and push on the trackpad to select it. Then navigate to Wipe data/factory reset and select that.
9. Once that is done, push volume down to go back to the main menu and select Flash zip from sdcard and select the rootedupdate.zip file and wait for it to flash. All done, you have root access and can use any root required app! Enjoy!
Click to expand...
Click to collapse
This worked when all else did not ill try and help others just ask
i got all this info from the links below and reading all the response's i hope this info helps some one
http://forum.xda-developers.com/showthread.php?t=725430
http://android.modaco.com/content/htc-legend-legend-modaco-com/323201/downgrading-from-froyo-ota/
http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/
This deserves a sticky
mike998 said:
This deserves a sticky
Click to expand...
Click to collapse
What's wrong with the current sticky?
TheGrammarFreak said:
What's wrong with the current sticky?
Click to expand...
Click to collapse
i think maybe just the first post of the sticky needs to be updated to include something along these lines
Hello, Having some trouble here.
I got to the step where you run the Step1 batch file from windows. The cmd prompt comes up and says "erasing cache....." then sits. a few minutes later. i get
"FAILED <status read failed <unknown error>>
< Waiting for device>
During the erasing cache part, my phone had the boot menu on screen with no response from the controls. Also, a little green status bar was at 90%. (Second thought, that may be battery level. not sure. Confirm?)
Yeah, so, can't get step1 to work.
EDIT: ok. got step 1 and 2 to work. I basically just kept trying over and over and it went through.
So, i got to the custom boot menu. But i try to install update.zip from sd. But i get an error.
It says.
Installation aborted.
--wiping data...
formatting data...
formatting cache...
data wipe complete.
--install from sdcard
finding update package
opening update packing verifying update package.
E: failed to open /sdcard/update.
zip (No such file or directory)
E:signature verification failed
installation aborted.
So, wtf did i do wrong? now my phone is completely wiped, so.... now what?
sig ver
FourForty said:
Hello, Having some trouble here.
I got to the step where you run the Step1 batch file from windows. The cmd prompt comes up and says "erasing cache....." then sits. a few minutes later. i get
"FAILED <status read failed <unknown error>>
< Waiting for device>
During the erasing cache part, my phone had the boot menu on screen with no response from the controls. Also, a little green status bar was at 90%. (Second thought, that may be battery level. not sure. Confirm?)
Yeah, so, can't get step1 to work.
EDIT: ok. got step 1 and 2 to work. I basically just kept trying over and over and it went through.
So, i got to the custom boot menu. But i try to install update.zip from sd. But i get an error.
It says.
Installation aborted.
--wiping data...
formatting data...
formatting cache...
data wipe complete.
--install from sdcard
finding update package
opening update packing verifying update package.
E: failed to open /sdcard/update.
zip (No such file or directory)
E:signature verification failed
installation aborted.
So, wtf did i do wrong? now my phone is completely wiped, so.... now what?
Click to expand...
Click to collapse
okay when your in the recovery menu the one with green text and you go to flash the file theres an option to "toggle signature verification " or something along those lines
then when the verification is off flash it
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
saifbunni said:
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
Click to expand...
Click to collapse
You should install the old version of HTC Sync until you're rooted, have you done that?
saifbunni said:
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
Click to expand...
Click to collapse
You need HTCsync 2 only for step2, to step1 you need the most updated HTCsync.
And you need step1, don't ignore that step just because it's not working.
Install the latest HTCsync, connect your phone to the computer, and put the phone on fastboot mode (should be written "fastboot usb" on phone)
now on the computer, in the folder of the rooting tools, write:
fastboot-windows.exe devices
Does it recognize your phone? (Should output details bout the phone including serial I think)
wel ive done step 1 now. i created a thread for this here..
http://forum.xda-developers.com/showthread.php?t=1095017
step 1 worked without htc sync, computer is good wen phone is in fastboot, it recognises it straight away, but wen i got into recovery is wher it messes up still even with htc sync. sum1 suggested another way, hav a look at the link, but im gettin signature verification failed or sumthin like that
help
saifbunni said:
wel ive done step 1 now. i created a thread for this here..
http://forum.xda-developers.com/showthread.php?t=1095017
step 1 worked without htc sync, computer is good wen phone is in fastboot, it recognises it straight away, but wen i got into recovery is wher it messes up still even with htc sync. sum1 suggested another way, hav a look at the link, but im gettin signature verification failed or sumthin like that
Click to expand...
Click to collapse
what hboot do you have on/ do you have android 2.2 on it?
Hey guys
I did a terrible mistake. Instead of just normally resetting the phone to factory settings in CWM after unlocking it, my finger slipped to the "format /system" option.
This happened before, but then I just sideloaded the rom and everything was ok. Oddly enough, this doesnt work anymore.
Whenever I want to push something to my phone using adb, I get the error that the device was not found and I cannot do anything to access the phone (when entering the command "adb devices" for example, no device shows up). I installed every driver I can think of, I installed all the packages in the sdk manager and now I dont know what to do.
I know that the debug mode is required, but since theres no OS anymore, I really ran out of ideas.
Please help me! :crying:
PS: additional information:
- HTC One m7 (unlocked)
- Clockwerkmod Recovery
- Windows 8
- Hasoon2000's all in one kit
EDIT: I found this site that recommends flashing via fastboot. (blog.syedgakbar.com/2013/02/01/android-installing-system-images-using-flashboot/)
where do I find these images?
I am trying to flash a customer recovery to my device, but when the phone gets put in download mode i am getting " "lge android mtp device cannot start code 10". " I can not perform any of the essential fastboot commands because the device can't start. I have tried, updating drivers, and trying different mtp drivers available to me, none of which worked. I've tried to do this on 3 pcs running windows 7, 8 , and 10 and they all fail.
Is there a solution to this issue? surely i'm not the only one having this problem. Searching the forum yielded only Samsung results with the same error message. Following the lines of going to the registry and deleting a specific entry, it still didn't work, so please, any help?
PS. reinstalling the drivers for my device does nothing, and windows is already updated.
bump
Did you solved it? I have the same problem
Sunaj1 said:
I am trying to flash a customer recovery to my device, but when the phone gets put in download mode i am getting " "lge android mtp device cannot start code 10". " I can not perform any of the essential fastboot commands because the device can't start. I have tried, updating drivers, and trying different mtp drivers available to me, none of which worked. I've tried to do this on 3 pcs running windows 7, 8 , and 10 and they all fail.
Is there a solution to this issue? surely i'm not the only one having this problem. Searching the forum yielded only Samsung results with the same error message. Following the lines of going to the registry and deleting a specific entry, it still didn't work, so please, any help?
PS. reinstalling the drivers for my device does nothing, and windows is already updated.
Click to expand...
Click to collapse
because flashing twrp.... phone doesnt have to be in download mode..
you turn on phone plug usb. then install minmal adb
copy twrp file into adb folder/ keep pressed SHIFT KEY on empty space in minimal adb.. then right click mouse
then select start command prompt here.
then send command you should see a message on phone .. turn on screen. select ok. then again send command
the twrp files both one in sd card and in minimal adb and the command should be named the same for twrp. example twrp.v.1.1.3 the command has to be the same .. just edit command or both or rename twrp the twrp file.
I could not find anything similar using the search and google, so I hope I can find some help here.
I have the XT1900-7 device and I have to upgrade it to Android 9 as my banking app will stop working otherwise next week. I don't get the update offered via the Android settings, but the support confirmed that it is available.
I already tried to use the Lenovo Rescue and Smart Assistant as they recommended, but it says the device is not supported after downloading the firmware file.
I tried sideloading with the file I got from the assistant as well as with the one from https://motostockrom.com/motorola-moto-x4-xt1900
But when I enter recovery menu and select to sideload from ADB (same issue when trying with SD card), it always fails at the first step.
It prints "failed to unmount /" and then "failed to set up expected mounts for install".
Another frequent entries in the recovery log say "failed to open driver control: No such file or directory" and "[libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt".
But I could not figure out the reason for these or if they are related.
I wiped all data as well, but it made no difference.
Not directly related, but I mention it in case someone has a suggestion for that:
As the sideloading failed, I unlocked the bootloader (sideloading still does not work) and tried to install the firmware with fastboot.
But it seems that the communication is not stable or corrupted. I have to type most commands at least twice to receive a response other than "not found" or "remote: unknown command".
I read that this could be related to a bad USB cable. I already tried switching ports, but I don't have another USB cable available right now.
Could there be another reason for this issue?
Thanks for any help with this. I really don't want to buy a new phone again just because of that.