Hard Bricked or Soft Bricked - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &
Hi to all,
I'm dumpling year.
When the output of the 4 .3 I was eager to try the shot, I put it and I go to Warrant Knox 0X01
There are some days, I thought I'll try a rom customn in 4.4.
Except that interests me more. I redownload a stock rom 4.3 ... except that I forget more than knox we can downgrade.
I am forced to make a custom rom in 4.3, no worries except to install. It must be gold during installation of, 4.3 stock ROM recovery mode, I had a FAIL of odin and the phone displays FIRMWARE upgrade me Encountered year end
I try to restore it with kies, it crashes at the end of the download.
So, I have access to download mode, no recovery. So I can not install a custom rom.
I try to install CF AUTO ROOT, except that I think I got the wrong file and suddenly the phone will not turn.
Only the Samsung Galaxy SIII 4G logo lights up when I plug in charge.
Should I buy a USB JIG?
Should I take it in for repair?
Should I put it in the trash?
Thank you for all your help
:fingers-crossed:
You don't have an i9300 so have posted in the wrong forum, report your own post and ask a moderator to move it for you.
Valbuena72 said:
Hi to all,
I'm dumpling year.
When the output of the 4 .3 I was eager to try the shot, I put it and I go to Warrant Knox 0X01
There are some days, I thought I'll try a rom customn in 4.4.
Except that interests me more. I redownload a stock rom 4.3 ... except that I forget more than knox we can downgrade.
I am forced to make a custom rom in 4.3, no worries except to install. It must be gold during installation of, 4.3 stock ROM recovery mode, I had a FAIL of odin and the phone displays FIRMWARE upgrade me Encountered year end
I try to restore it with kies, it crashes at the end of the download.
So, I have access to download mode, no recovery. So I can not install a custom rom.
I try to install CF AUTO ROOT, except that I think I got the wrong file and suddenly the phone will not turn.
Only the Samsung Galaxy SIII 4G logo lights up when I plug in charge.
Should I buy a USB JIG?
Should I take it in for repair?
Should I put it in the trash?
Thank you for all your help
:fingers-crossed:
Click to expand...
Click to collapse
your english is so bad i can't understand anything....read a few words think i understood, read next two i realize i don't understand anything
spiderman07 said:
your english is so bad i can't understand anything....read a few words think i understood, read next two i realize i don't understand anything
Click to expand...
Click to collapse
I'm really sorry, I'm French.
I repeated.
I was on stock 4.2 rom at first, then I updated to 4.3 with odin.
Everything functioned very well, and I had the urge to try android 4.4. So I put a custom rom on my S3. This rom not like me, I wanted to return to 4.3 but odin shows me an error message: FAIL!
So I try with mobile odin pro and this is where I reboot the phone and I have the message FIRMWARE UPGRADE AN ISSUE Encountered. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
I had access to the download mode.
I try KIES emergency mode, kies closes at the end of the download.
I wanted, flash a recovery and I am wrong file.
Now the phone will not turn and when I plug to recharge.
The Samsung logo stuck.
The download mode, recovery is no longer available.
I think i understood your problem,
In summary you flashed a wrong recovery which isn't for your phone and now you can't access both recovery and download mode.
Try buying a usb jig or make one yourself http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707. Maybe it will work.
When you got an error while trying to flash your firmware, you should have tried another one, maybe the one you downloaded was corrupted.
If the usb jig works download another firmware, don't flash the one you got an error with.
Next time you post, post your question in both english and french. There are some people on XDA (including me) who understand french also.
A big thank you Lucas.
I buy this cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (add in front!)
I hope it will work.
By cons, after that. The phone is in download mode.
What do I do next? I can not flash custom rom ... must use a recovery
If I flash a recovery with odin, he will walk you think?
------------ FRENCH POST -------------
Un grand merci Lucas.
J'ai acheter ceci cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (ajouter devant ! )
J'espère que ça fonctionnera.
Par contre, après ça. Le téléphone est en mode download.
Je fais quoi après ? je peux pas flasher de rom custom...faut utiliser un recovery
Si je flash un recovery avec odin, il marchera tu crois ?
Après dans le recovery je flasherai une rom custom 4.3.
Je crois qu'il n'est plus possible d'avoir une rom officielle à cause de Knox.
Valbuena72 said:
A big thank you Lucas.
I buy this cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (add in front!)
I hope it will work.
By cons, after that. The phone is in download mode.
What do I do next? I can not flash custom rom ... must use a recovery
If I flash a recovery with odin, he will walk you think?
------------ FRENCH POST -------------
Un grand merci Lucas.
J'ai acheter ceci cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (ajouter devant ! )
J'espère que ça fonctionnera.
Par contre, après ça. Le téléphone est en mode download.
Je fais quoi après ? je peux pas flasher de rom custom...faut utiliser un recovery
Si je flash un recovery avec odin, il marchera tu crois ?
Après dans le recovery je flasherai une rom custom 4.3.
Je crois qu'il n'est plus possible d'avoir une rom officielle à cause de Knox.
Click to expand...
Click to collapse
If the jig works, your phone will be in download mode, don't flash any custom rom, download an official 4.3 firmware from Sammobile http://www.sammobile.com/firmwares/ for your phone, and use odin to flash it. your phone should work fine after that.
No, that's what I did the first time!
Odin shows me FAIL when flashing, is not it because of Knox?
c'est ce que j'ai fait la première fois !
Odin m'affiche FAIL lors du flashage, n'est ce pas à cause de Knox ?
Valbuena72 said:
No, that's what I did the first time!
Odin shows me FAIL when flashing, is not it because of Knox?
c'est ce que j'ai fait la première fois !
Odin m'affiche FAIL lors du flashage, n'est ce pas à cause de Knox ?
Click to expand...
Click to collapse
I don't think it's due to knox, maybe the firmware you downloaded was corrupted... try downloading another one and flash it.
I haven't updated my phone to any custom 4.4.2 rom. I'm on stock 4.3, maybe someone who has tried it can tell you if it is possible to downgrade to stock 4.3 while having custom 4.4.2 with knox bootloader.
when I do a search for the rom I download I get a 4.1.2: o
I am very surprised.
Thank you, I expected to receive the jig usb! I'll try this one http://www.sammobile.com/firmwares/3/?download=24005
No it isn't
Confirm download
Model: GT-I9305
Model name: GALAXY S III
Country: France
PDA: I9305XXUEMKC
Click to expand...
Click to collapse
I9305XXUEMKC is 4.3
Model: GT-I9305
Model name: GALAXY S III
Country: France
Version: Android 4.3
Changelist: 2051278
Build date: Thu, 28 Nov 2013 04:17:40 +0000
Product Code: XEF
PDA: I9305XXUEMKC
CSC: I9305XEFEMK1
MODEM: I9305XXUEMK1
Click to expand...
Click to collapse
Confirmation
Valbuena72 said:
when I do a search for the rom I download I get a 4.1.2: o
I am very surprised.
Thank you, I expected to receive the jig usb! I'll try this one http://www.sammobile.com/firmwares/3/?download=24005
Click to expand...
Click to collapse
The link you posted is a 4.3 firmware not 4.1.2. You can also try searching a specific 4.3 firmware modified by your carrier.
Good luck in trying to revive your phone :fingers-crossed:
hi,
jig usb does not work unfortunately.
The screen remains blank and only when I plug the charger, samsung galaxy logo appears but remains blocked.
More great solution is not it?
JIG USB ne fonctionne pas malheureusement.
L'écran reste éteint et seulement lorsque je branche le chargeur, le logo samsung galaxy apparait mais reste bloqué.
Plus beaucoup de solution n'est ce pas ?
Valbuena72 said:
hi,
jig usb does not work unfortunately.
The screen remains blank and only when I plug the charger, samsung galaxy logo appears but remains blocked.
More great solution is not it?
JIG USB ne fonctionne pas malheureusement.
L'écran reste éteint et seulement lorsque je branche le chargeur, le logo samsung galaxy apparait mais reste bloqué.
Plus beaucoup de solution n'est ce pas ?
Click to expand...
Click to collapse
As far as I know Jig's don't work with knox-enabled bootloaders. thats what I heard anyway.
This may not work but is worth a try - Remove battery and re-insert, hold home, volume down and power while plugging the phone in to the charger.
I heard some phones still enter download mode with the jig but the screen remains blank, try and do the jig method again and see if your computer recognizes it
If that doesn't work I'm sorry but I think you would have to replace the motherboard
Related
[Q] Have LATAM i9000T JG1 FW - Possible to flash froyo?
Hi, I bought a i9000T, branded and crap. It has this firmware, CSC, etc: PDA: I9000TUMJG1 [R5] Phone: I9000TUMJG1 CSC: I9000TTCEJG1 I'm wondering if I am able to flash to froyo with any of the ROMs available here. I'm specially worried about the CSC, and not being able to get 3G back. And if I need to go back to -as close to- factory firmware, will the clockworkmod backup do? If not what do I need to do to get a full backup of what it's loaded already? (if at all possible) Thanks
uh..anyone? =) I already downloaded everything but I don't want to brick my phone. Read through the guides but I don't feel like I have the answer to my specific question yet. (except some rather complicated way to keep/change the CSC) Thanks aggain
yo tengo el mismo celular y lei que el firmware de canada es compatible y si no hay una forma para no perder el 3g ya baje el odin y el firmware pero no lo he instalado y quien sabe que lo haga me gustaria leer mas experiencias de usuarios al respecto w w w. grupoandroid.com /samsung-galaxy-s-i9000 /10284-i9000t-ahora-firmware-froyo-y-850mhz. html bo dejan postear links asi que tendras que unir los espacios
Canada FW does not work...
OK I Live in Ecuador and HAve a I9000T too.... I hve froyo and this is what I did........ 1) Follow Docs froyo V8 JPA/JPO Exactly as he says!!!! You wont loose 850 band!! Becarefull With lagfix and always apply K9 kernel as it says in Docs Post... Dont use odin..... And to make backups of you firmware make a "DD" in the adb shell of all your partitions... specially the modem and kernel and with the CWM take a full backup.... thats all youll have to research in XDA for detailed instructions of everything
This sounds promising. The reason I haven't tried it is that an original firmware hasn't been leaked yet, so if something goes wrong I don't have anything to fall back to. I *might* try it! Edit: Is this the one you're talking about? http://forum.xda-developers.com/showthread.php?t=817703
PROBLEME Recovery 3e to the recovery 2e how this
hello excuse me for my English good I read and reread every tutorial I found but I'm blocking Here is my configuration sgs Version 2.2 I9000BUJP5 2.6.32.9.root @ SE-S611 # 1 FROYO.BUJP8 Phone rooter recovery ok download ok (natively on this) PDA: I9000BUJP8 PHONE: I9000BUJP5 CSC: I9000GSFRJP4 The recovery mode is the third recovery by reading the tutorial from some site, it does not have to go in JPY recovery but it must be second and the second recovery must be in JPY So my question (which is probably very stupid) How to place 3rd in the recovery recovery for the second update to a rom with newest show a custom rom because I'm looking on the forums that I know I can not find, or I'm a big spot comprehension question will know has the support Thank you
Just flash another ROM with odin like JM8 (link=> http://www.multiupload.com/FCYKST8QBO)
if I understand it enough to flash using odin with official rom so that I spend in recovery 2????? si je comprend bien il suffit de flasher en utilisant odin avec une rom officielle pour que je passe en recovey 2e????
Follow darkys 9.2 resurrection . Its video will show u Sent from my GT-I9000 using XDA App
[Q] Root on N7000UBKL2
Hi, I recently got an Galaxy Note, Brazilian one, Carrier VIVO. i past the last week searching an way to root it, all the methods i've found didn't work. On Dr. Ketan thread i cant find an option for the KL2 kernel. Here is my device data: Model: GT-N7000 Android Version: 2.3.6 Baseband: N7000UBKL2 Kernel: [email protected]30 #2 Compilation Number: GINGERBREAD.UBKL2 Check Fus Output: Device: GT-N7000 Product Code: GT-N7000ZBlZVV PDA: N7000UBKL2 Phone: N7000UBKL2 CSC: N7000ZVVKL2 Someone have a tip to help me do this?
If it is like all the other updates that Samsung has done, you can't directly root it. You'll have to follow his thread, downgrade the rom, root it, using ODIN, then update it with a prerooted rom.
Please read Dr.Ketan's thread here. It's all in there.
If your device is not carrier restricted, downgrade to older ROM, then root n then update to your present ROM, using CWM/Mobile Odin
dr.ketan said: If your device is not carrier restricted, downgrade to older ROM, then root n then update to your present ROM, using CWM/Mobile Odin Click to expand... Click to collapse The rom installed on device is an carrier one ( Vivo ), but the device is currently GSM unlocked. Does it matter?
Hi "alxbd"! I am from Brazil too. As "jellevanb" sugested, follow the Dr Ketan post. But pay attention: your actual firmware is not available yet on our big STOCK ROM list. Could someone understand why this ROM (N7000UBKL2) is not available on our list yet? Dr Ketan could help us?
I can make an dump, if someone can explain how.
enlacetelecom said: Hi "alxbd"! I am from Brazil too. As "jellevanb" sugested, follow the Dr Ketan post. But pay attention: your actual firmware is not available yet on our big STOCK ROM list. Could someone understand why this ROM (N7000UBKL2) is not available on our list yet? Dr Ketan could help us? Click to expand... Click to collapse As op said it is available on chexk fus, then u can download from there. Forst root then update using cwm/mobile odin If someone have downloaded it feom check fus, kindly upload on file host, i will update to stock thread. Sent from my GT-N7000 using xda premium
So, in order to get root I will need to flash an older ROM, right? If so, which one on ketan list is more safe for me, my original tom don't exists on check fus, can I flash one of the open Europe? Thx guys. Sent from my GT-N7000 using xda premium
I will sugget you this for downgrade N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India - It is rootable, i have root it. - Non wipe, so you won't lose data. After downgrade ROM, just follow my guide to get it rooted. after that you can update to any ROM
Ok, will do this when arrive at home. Thank you a lot.
Sirs, based on previous information from "alxbd", I found this brazilian firmware UBKL2 inside CHECK FUS downloader. The results from CHECK FUS is: Product Code: GT-N7000ZBLZVV Latest firmware: N7000UBKL2/N7000ZVVKL2/N7000UBKL2/N7000UBKL2 Modified: 03/01/2012 14:41:33 Filename: GT-N7000_ZVV_1_20120103144111.zip.enc2 Dr Ketan, could you please update your great big list with this new version? Thanks.
Rom Stock Brazil ZTO Hi, i can´t found my stock rom at check fus download. My rom are clean brazilian rom (ZTO) (without carrier stuffs) Model/Device: GT-N7000 Product Code: GT-N7000ZBLZTO PDA: N7000UBKK3 Phone: N7000UBKK1 CSC: N7000ZTOKK1 Kernel: 2.6.35.7-N7000UBKK3-CL702304 [email protected] #2 Please help me.
Thiago Fialho said: Hi, i can´t found my stock rom at check fus download. My rom are clean brazilian rom (ZTO) (without carrier stuffs) Model/Device: GT-N7000 Product Code: GT-N7000ZBLZTO PDA: N7000UBKK3 Phone: N7000UBKK1 CSC: N7000ZTOKK1 Kernel: 2.6.35.7-N7000UBKK3-CL702304 [email protected] #2 Please help me. Click to expand... Click to collapse En: You can get this firmware on Checkfus (Google it). Pt: Da pra bixar esste firmware no Checkfus, to baixando agora.
Hi, DONE. Thank you very much. Used the indian rom wich Ketan indicated, worked like a charm.
Opa! Fala alxbd, comprei um note faz umas 2 semanas. Só quem veio Stock da TIM. Estou com uma dúvida, de que se seguir esse método do dr.ketan, fique aparecendo aquele triangulo amarelo ou aumento o counter de firmware. Aconteceu isso com você? Também achei o tutorial um pouco confuso... mas no caso é só seguir o que está escrito na pagina né? Usar o Odin do PC pra flashear uma room antiga e depois usar o Odin Mobile pra dar root. Desde já agradeço. ENG: Just bought GNOTE in Brazil, but in different carrier (TIM). I wanna know if Dr Ketan´s method avoids the yellow triangle sign after root. Thx all
Nckvrd said: Fala alxbd, comprei um note faz umas 2 semanas. Só quem veio Stock da TIM. Estou com uma dúvida, de que se seguir esse método do dr.ketan, fique aparecendo aquele triangulo amarelo ou aumento o counter de firmware. Aconteceu isso com você? Também achei o tutorial um pouco confuso... mas no caso é só seguir o que está escrito na pagina né? Usar o Odin do PC pra flashear uma room antiga e depois usar o Odin Mobile pra dar root. Desde já agradeço. ENG: Just bought GNOTE in Brazil, but in different carrier (TIM). I wanna know if Dr Ketan´s method avoids the yellow triangle sign after root. Thx all Click to expand... Click to collapse Pt-BR: Oi, pode fazer na fé Funcionou bonito pra mim, depois eu cheguei até a por a rom da vivo devolta nele, roteada dessa vez, mas tô usando aquela da CheckRom agora, recomendo. Não tenho nenhum triângulo, e o counter tá em NO. Eng: ( Short version ) Works like a charm.
Hi folks, I'm in a pinch here. Initially I was in the same scenario as alxbd, but before discovering this useful post I tried to root my Galaxy Note (Brazilian, TIM, N7000UBKL2) using Odin and AbyssNotekernel42CWTouchOriginalLogo.tar as described here: rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/. Everything apparently went fine and I did got root access, however when booting into ClockworkMod recovery it keeps blinking and I'm not able to choose any option, also my phone become a bit unstable and I got the infamous yellow triangle too. I uninstalled the CWM using Titanium Backup and replaced it for the ROM Manager available at Play Store but it was unable to backup my original ROM, the first step I would like to take before trying to flash any new ROM. So, how can I fix this mess?? Can I safely go back to the original state flashing my ROM for this one I found here: hotfile.com/dl/148389052/d9941e2/N7000UBKL2_N7000ZVVKL2_ZVV.zip.html (apparently it's the same as mine) or should I downgrade my ROM first and then flash it for a pre rooted rom? Please help. Thank you
Hi, I'm not an expert, but i think you can flash the original ROM with odin or mobile odin without any troubles, but, again, i'm not an expert and never been in the same situation, i had my own "OMFG this **** is bricked" times before, and ODIN saved me... Regarding the yellow triangle, follow the sticky tread about removing it, this is a JIG http://dx.com/p/unbrick-download-30...959-i9000-i897-m110s-i8700-i9100-93514?item=2 i bought mine in this site. Hope this help.
Hi alxbd, I'm relieved, everything is ok now. Initially I gave a shot using odin to flash the rom N7000UBKL2_N7000ZVVKL2_ZVV (Brazilian VIVO). I lost root and CWM but the phone was ok and the yellow triangle was gone (the flash counter remained displaying "1" but I can live with that). Then I received help from Dr.Ketan and followed his invaluable "Dr.Ketan's Guide to Root + ROM update" that I failed to see earlier. Now my GN is rooted and running ICS 4.0.3 (Germany) and I have no fear to flash it again if necessary. =D
Mobile Network Not Available
I have a problem with my ACE...when I try to call someone I see "Mobile Network Not Available" ... i changed ROM and flashed stock with Odin but still same problem. How can i solve this ?
take it to Samsung Service Centre.
Remove SIM and re-insert again.
flash modem of your country Modem Collection
HELP s5830L I have a problem my phone is a s5830L ace, but install a rom and now I get 55830, I have no signal, the telephone says "mobile network unavailable", I flash the moden s5830lubkp7 odin, but still no signal, try to flash a stock rom to odin, but remains in bootlogo, thanks for the help I can give, i apologize for my English
santiago1104 said: I have a problem my phone is a s5830L ace, but install a rom and now I get 55830, I have no signal, the telephone says "mobile network unavailable", I flash the moden s5830lubkp7 odin, but still no signal, try to flash a stock rom to odin, but remains in bootlogo, thanks for the help I can give, i apologize for my English Click to expand... Click to collapse Where u from? Sent from my GT-S5830 using XDA
xSkArx said: Where u from? Sent from my GT-S5830 using XDA Click to expand... Click to collapse soy de colombia, ya instale una rom stock de un operador local y ademas le flashe el moden correcto , el de latinoamerica, pero sigue sin darme señal de ningun tipo, solo dice RED MOVIL NO DISPONIBLE, en colombia mi operador es MOVISTAR y trabaja en banda 850.
I m also facing this annoying problem with my ace running mirracle v4 with 3g sim cards only.... I don't face this problem everytime but sometimes it says no service... dnt knw wht prob is that..... Sent from my GT-S5830 using xda premium
[Q] Root my I9070 (three question)
En: Hi. I'm new here and I have some questions for you. Question # 1: My SGSA has build number GINGERBREAD.XXLK2 and baseband version is I9070XXLK2, how can rooted with this version? A tutorial please? Question #2: What is the best rom with Jelly Bean? Question #3: How can I go in safe to Jelly Bean? Thanks and sorry for my english! __________________________________________________________ Ro: Hoping for some compatriots and give me better understand. Salut, sunt nou aici si am cateva intrebari pentru voi. Intrebarea nr. 1: Al meu SGSA are numarul de versiune GIGERBREAD.XXLK2 si versiune banda de baza I9070XXLK2, cum imi pot rota telefonul cu aceasta versiune? Un tutorial va rog? Intrebarea nr.2: Care este cel mai bun rom cu Jelly Bean? Intrebarea nr.3: Cum pot sa trec in siguranta la Jelly Bean?
Grady22 said: En: Hi. I'm new here and I have some questions for you. Question # 1: My SGSA has build number GINGERBREAD.XXLK2 and baseband version is I9070XXLK2, how can rooted with this version? A tutorial please? Question #2: What is the best rom with Jelly Bean? Question #3: How can I go in safe to Jelly Bean? Thanks and sorry for my english! __________________________________________________________ Ro: Hoping for some compatriots and give me better understand. Salut, sunt nou aici si am cateva intrebari pentru voi. Intrebarea nr. 1: Al meu SGSA are numarul de versiune GIGERBREAD.XXLK2 si versiune banda de baza I9070XXLK2, cum imi pot rota telefonul cu aceasta versiune? Un tutorial va rog? Intrebarea nr.2: Care este cel mai bun rom cu Jelly Bean? Intrebarea nr.3: Cum pot sa trec in siguranta la Jelly Bean? Click to expand... Click to collapse A #1: http://forum.xda-developers.com/showthread.php?t=1660419, for step 10 you need to repack your kernel to be Odin flashable. How to get it? Read post 2 of that thread. A #2: Don't know, still using Stock A #3: Flash it with Odin, only way. P.S. Addition to #1, if you install JB, you can easy root with this method.
shut_down said: A #2: Don't know, still using Stock Click to expand... Click to collapse I'm currently using JellyMOD 3.0 and my phone is really smooth but I'm about to try Pure Vanilla AOSP. I'll reply soon as to how that is Sent from my GT-I9070 using xda premium
shut_down said: A #1: http://forum.xda-developers.com/showthread.php?t=1660419, for step 10 you need to repack your kernel to be Odin flashable. How to get it? Read post 2 of that thread. A #2: Don't know, still using Stock A #3: Flash it with Odin, only way. P.S. Addition to #1, if you install JB, you can easy root with this method. Click to expand... Click to collapse If you go to stock JB I can always return to stock GB, no? For JB just flash original firmware(4.1.2) with Odin ? Thank you so much for answers. Sorry for my english!
Yes, you must only flash JB with Odin. PS: RO: Nu ai altceva de facut decat sa flash-uiesti JB cu Odin. Pentru GB este ceva mai complicat si nu are sens, pentru ca ultima versiune, LQ4 nerge foarte bine si au inceput sa abara si ROM-uri custom, deci ai de unde alege. Vb. pe PM daca vrei alte detalii.
Abhinandh Ajay said: I'm currently using JellyMOD 3.0 and my phone is really smooth but I'm about to try Pure Vanilla AOSP. I'll reply soon as to how that is Sent from my GT-I9070 using xda premium Click to expand... Click to collapse EDIT: Even though Pure Vanilla is themed more, I still prefer JellyMOD but it's your choice of what you want to install :thumbup: Sent from my GT-I9070 using xda premium