[Q] Atrix HD will not complete the new update need HELP!!! - Motorola Atrix HD

My phone has been saying for a couple weeks now that I need to update it so i go to update it and it shuts down and then you see the android trying to complete the update then about halfway through it stops and i get the orange warning sign like it failed then the phone reboots and says update failed then i tryed rebooting it into recovery and it wont even boot into recovery.

bpc87 said:
My phone has been saying for a couple weeks now that I need to update it so i go to update it and it shuts down and then you see the android trying to complete the update then about halfway through it stops and i get the orange warning sign like it failed then the phone reboots and says update failed then i tryed rebooting it into recovery and it wont even boot into recovery.
Click to expand...
Click to collapse
Hasn't this already been discussed in the update thread? Flash the stock ATT JB, then accept the update.

bpc87 said:
My phone has been saying for a couple weeks now that I need to update it so i go to update it and it shuts down and then you see the android trying to complete the update then about halfway through it stops and i get the orange warning sign like it failed then the phone reboots and says update failed then i tryed rebooting it into recovery and it wont even boot into recovery.
Click to expand...
Click to collapse
If you ever rooted, ran a custom recovery, chances are you tweaked something under /system that's causing it to fail. Flash stock recovery and stock system then take the OTA.
Now, with my old Atrix HD, the OTA took just fine with a rooted system and Philz CWM, on my new Atrix HD, I had to be using stock recovery and unrooted...odd.

skeevydude said:
If you ever rooted, ran a custom recovery, chances are you tweaked something under /system that's causing it to fail. Flash stock recovery and stock system then take the OTA.
Now, with my old Atrix HD, the OTA took just fine with a rooted system and Philz CWM, on my new Atrix HD, I had to be using stock recovery and unrooted...odd.
Click to expand...
Click to collapse
My friend also asked me about this prob today I also told him that but thanks for the info since it's just my thinking and i havent tried still on CM11 to wait official kitkat

devilsking said:
My friend also asked me about this prob today I also told him that but thanks for the info since it's just my thinking and i havent tried still on CM11 to wait official kitkat
Click to expand...
Click to collapse
Same here!

i have the same problem but i'm on stock jb. just rooted the phone and stock bootloader. i don't now if it has something to do with not being in usa and using an AT&T phone. but it's really annoying the message every hour.

magocop said:
i have the same problem but i'm on stock jb. just rooted the phone and stock bootloader. i don't now if it has something to do with not being in usa and using an AT&T phone. but it's really annoying the message every hour.
Click to expand...
Click to collapse
The OTA update should install even without an ATT SIM card in the phone. I have a Bell Atrix HD in Canada with an unlocked bootloader. I installed the stock JB ATT ROM, ran the update, installed a customer recovery, and went back to using a custom ROM.

audit13 said:
The OTA update should install even without an ATT SIM card in the phone. I have a Bell Atrix HD in Canada with an unlocked bootloader. I installed the stock JB ATT ROM, ran the update, installed a customer recovery, and went back to using a custom ROM.
Click to expand...
Click to collapse
Did you have to call Bell to get that customer recovery? And where can I get one at?

skeevydude said:
Did you have to call Bell to get that customer recovery? And where can I get one at?
Click to expand...
Click to collapse
I apologize. I meant to say "custom" and not "customer". I was posting from my phone and didn't notice that auto correct changed the word to customer.

audit13 said:
I apologize. I meant to say "custom" and not "customer". I was posting from my phone and didn't notice that auto correct changed the word to customer.
Click to expand...
Click to collapse
I know. Just having a bit of fun
Autocorrect....Adding the wrong word for the lulz since 2009

skeevydude said:
I know. Just having a bit of fun
Autocorrect....Adding the wrong word for the lulz since 2009
Click to expand...
Click to collapse
No worries. Good thing you brought the error to my attention; otherwise, Bell would start receiving requests for the "customer" recovery files:laugh:

skeevydude said:
If you ever rooted, ran a custom recovery, chances are you tweaked something under /system that's causing it to fail. Flash stock recovery and stock system then take the OTA.
Now, with my old Atrix HD, the OTA took just fine with a rooted system and Philz CWM, on my new Atrix HD, I had to be using stock recovery and unrooted...odd.
Click to expand...
Click to collapse
I probably did when i first figured out how to use custom roms i was trying a whole bunch of them but that was awhile ago and now i dont remember how to flash a stock recovery or where to get it and i did awhile ago use RSD Lite to flash a stock rom onto my phone but that is the last thing I did and know its been sooo long i dont remember how any help from anyone would be greatly appreciated and sorry i have not got back to this post in a few days been busy doing other things but once again if anyone could help me it would be appreciated
Thanks
- Bart

Try using Myth Tools to flash back to stock, take the update, install a custom recovery, and flash a KK ROM.
http://forum.xda-developers.com/showthread.php?t=2262726

Related

[Q] Bell OTA Update Problems

A few weeks ago I decided to root my phone. I managed to get S-Off but didn't get past that because I couldn't install Clockwork. Today the official OTA 2.3 update became available and when I press install, it shuts down and restarts but my phone gets stuck on the startup white screen with the green HTC logo in the middle.
I tried removing battery and SIM and trying again but didn't work. When I try to do a hard reset the same problem white screen happens after phone shuts down and restarts. I'm incredibly (no pun intended) frustrated as I was really looking forward to getting this update. Other than this the phone works normally when I take out the battery and turn on again. The phone was originally locked to bell but I unlocked to work with Fido. Please help!!! Thank you!!!
I'm not a real expert but I would try installing clockwork again. Try the 4ext version found in the android development forum. You can get into recovery right?
I wasn't able to install Clockwork so I don't even have that. I can get into hboot by volume down+power but when I press factory reset phone shuts off and restarts then gets stuck on white startup screen with htc logo. The same thing happens when I try to install the OTA update.
Napoleon Dynamite said:
A few weeks ago I decided to root my phone. I managed to get S-Off but didn't get past that because I couldn't install Clockwork. Today the official OTA 2.3 update became available and when I press install, it shuts down and restarts but my phone gets stuck on the startup white screen with the green HTC logo in the middle.
I tried removing battery and SIM and trying again but didn't work. When I try to do a hard reset the same problem white screen happens after phone shuts down and restarts. I'm incredibly (no pun intended) frustrated as I was really looking forward to getting this update. Other than this the phone works normally when I take out the battery and turn on again. The phone was originally locked to bell but I unlocked to work with Fido. Please help!!! Thank you!!!
Click to expand...
Click to collapse
how were you notified of the update?
It's so unlucky
ottawadad34 said:
how were you notified of the update?
Click to expand...
Click to collapse
I went to Settings---->about phone---->check for updates and the update came up. I downloaded via Wifi.
Napoleon Dynamite said:
I went to Settings---->about phone---->check for updates and the update came up. I downloaded via Wifi.
Click to expand...
Click to collapse
Crapp. I don't have that option. Must be because of my custom rom.
Sent from my HTC Incredible S using XDA Premium App
Napoleon Dynamite said:
I wasn't able to install Clockwork so I don't even have that. I can get into hboot by volume down+power but when I press factory reset phone shuts off and restarts then gets stuck on white startup screen with htc logo. The same thing happens when I try to install the OTA update.
Click to expand...
Click to collapse
The OTA update will not install if your phone doesn't have the standard HTC recovery on it. The fact that you have tried to instll ClockworkMod must have left your recovery image in bad state. Sounds like you need to use the 'fastboot flash recovery' command to flash good recovery image.
If i have S-Off, and clockwork recovery installed, but stock rom, i cant install the 2.3 OTA update?
Um what? Bell didn't release their 2.3 update... How did you get that? Can you please upload the RUU because I am stuck at bootloader until Bell releases their 2.3 update.
Nice, downloading the update right now. It showed up with manual check.
I'm running totally stock IS.
^Can you PLEASE save the link and upload the RUU!!
I need it desperately lol.
Link from logcat of what it downloaded:
http://fotadl.htc.com/OTA_Vivo_Ging...1.37.666.3_release_1996915a77tbflmphcmnen.zip
ptscon said:
http://fotadl.htc.com/OTA_Vivo_Ging...1.37.666.3_release_1996915a77tbflmphcmnen.zip
Click to expand...
Click to collapse
Is that it? It seems pretty small lol.
ClaudiuJer said:
Is that it? It seems pretty small lol.
Click to expand...
Click to collapse
That's what I see it downloaded, its 88 megs zipped.
Ah no S-OFF or Sense update ..still 2.1
Guess I was hoping for too much. GB 2.3.3
Did u guys successfully install the 2.3 Bell update or no?
^ No not yet... I really need the RUU in .exe file. Do you have any idea how to do that?
Soul Rebel said:
If i have S-Off, and clockwork recovery installed, but stock rom, i cant install the 2.3 OTA update?
Click to expand...
Click to collapse
No, the OTA will not install if you have ClockworkMod recovery in place. Since you are S-OFF, you can flash the original HTC recovery to replace ClockworkMod and then the OTA should work.
ptscon said:
Link from logcat of what it downloaded:
http://fotadl.htc.com/OTA_Vivo_Ging...1.37.666.3_release_1996915a77tbflmphcmnen.zip
Click to expand...
Click to collapse
Anyone know if this can be flashed Using ClockWorkMod?

New Telstra ICS update to 3.44.841.3?

Telstra ROM showing update available to ICS
System upgrade to 3.44.841.3
Anyone else getting this?
My phone is on the standard Telstra ICS ROM, however is S-off and unlocked... and has recovery if I update will this bork my phone?
Download Here https://docs.google.com/open?id=0B_yipCshKsIQa3B6bHl6UnVDMGs 58.8MB
I upgraded to this about 2 days ago, admittedly on a stock Velocity....rumblings seem to say that this is a radio fix from Telstra only at this stage (and an unsuccessful one at that)
Ah righto, I attempted applying it but it just made my phone display a belly up android with a hazard sign sticking our of its belly, I'm uploading the file now for people to play with should be done soon :laugh:
I did the upgrade on stock too, any idea what it was supposed to fix? I've yet to notice any differences, not that I noticed any problems before...
Sent from my HTC Velocity 4G using xda
I do believe this article may enlighten you.
Not sure.. That's really for the nexus in US only. Maybe related...
One thing I just noticed with this update is that it finally muted the camera sounds when the phone is on silent
Leigh Kennedy said:
I do believe this article may enlighten you.
Click to expand...
Click to collapse
I'm not sure that's it. The patent in my understanding is about apps/contacts/other stuff showing up in the universal search, which mine still does after the update.
Update fails. any hints welcome
I have a Velocity with the OTA 4.0.3 ICS update. When I bought it I tried to root it using hansoon2000s 1 in all kit. I did unlock the bootloader, but attempts to gain root access failed so at that time I relocked the bootloader and just forgot about it.
When I try to install the 3.44.841.3 update, the phone shuts down then reboots to the FASTBOOT menu which gives me the option of
BOOTLOADER,
REBOOT,
REBOOT BOOTLOADER or
POWER DOWN
and it shows at the top *RELOCKED*.
If I select BOOTLOADER I go to the HBOOT menu and I can see
FASTBOOT
RECOVERY
FACTORY RESET
CLEAR STORAGE
SIMLOCK
IMAGE CRC
I have limited skills but I am guessing if I got to the recovery menu I would be able to choose a zip file to run and I could point it at the OTA zipfile which it downloaded, but when I go to recovery it just goes back to the FASTBOOT menu.
Any ideas which course of action I should take. Because it's not rooted I don't have a good backup of app data so I'd really prefer not to take any action which is going to set the phone back to Factory unless I am fairly certain of the outcome. I'm still not even sure that I need to apply this update because I have no issues with my phone (but just for the sake of the exercise lets presume I'm trying to load a Jellybean OTA update, which is something I definitely would want to do even if I reset the phone).
Ideas or suggestions ?
Bro use all in one to unlock bootloader from the menu your talking about select recovery then when it boots into a recovery you chose from the all in one use the volume to navigate to the zip file there's a prerooted gb one that I'm using then once you install it and phone reboots let the phone update to ics
Sent from my HTC PH39100
I've got a feeling that this may have updated the Velocity to a custom hboot version, because now I'm having all sorts of trouble with custom kernals and roms. Investigating now to make sure it's not my own derpiness that's causing this.....
Demomanca said:
I've got a feeling that this may have updated the Velocity to a custom hboot version, because now I'm having all sorts of trouble with custom kernals and roms. Investigating now to make sure it's not my own derpiness that's causing this.....
Click to expand...
Click to collapse
Yeah same thing happened to me because of using a deodexed rom, but you can get it fixed pretty easily.
Only problem is I don't know how to get the update to work with the stock rom as i doesn't keep. I assume leigh kennedy knows how to apply the update to stock rom and then deodex, as he did it the for stock. Hope he does it for this too.
does anyone know exactly what the update does or are we all in the dark about it? It looks like its just an update to a few APK's, using my
*mad grand karate master winzip skillz, yo*
Is it a radio fix or what?
davidcampbell said:
does anyone know exactly what the update does or are we all in the dark about it? It looks like its just an update to a few APK's, using my
*mad grand karate master winzip skillz, yo*
Is it a radio fix or what?
Click to expand...
Click to collapse
Google result said the update was to fix radio reception issues for some users, I think it was mentioned on whirlpool and a telstra support site.
OTA update.
Hi I also have received the notification for an OTA update with a link to HTC.com for my Velocity 4G, But I am running "nightly Build 4" since it came out and it is running like a dream. I also got the error msg with Mr android, belly open and a triangle warning sign. Not surprised tho. However I am thirsty still and ofc with Jelly Bean bouncing in I am tempted to flash the new ROM when it is avail.. Any ideas when it will be? :fingers-crossed:
How can I flash this OTA manually?
My Velocity is stock non rooted an locked.
The phone is stuck at the HTC screen so really only have access to fastboot...
Also, does anyone have the stock build.prop for the velocity 4g?
Ryyuu said:
How can I flash this OTA manually?
My Velocity is stock non rooted an locked.
The phone is stuck at the HTC screen so really only have access to fastboot...
Also, does anyone have the stock build.prop for the velocity 4g?
Click to expand...
Click to collapse
If you have access to fastboot, try running the RUU while connected in fastboot (drivers must be installed). This will put the phone back to a factory state, then you can check for and install the OTA
Any word on this coming to rogers? I would hate having to revert to stock to accept the update
Screw the update lol
Sent from my Holiday using xda app-developers app
Homeslice's PACman ROM doesn't prompt me for an update
Sent from my Holiday using Tapatalk 2

Bootloop with safestrap

How is one supposed to get out of a bootloop while loaded in a slot on safestrap? It only loops and never gives me a chance to load SS.
I recently took the update and was able to retain root. I am one of the few that it went from .51 to .54 and said failed update. luckily I was able to flash back to the original software and start over. So now for the time being I'll be staying with the ability to fxz back to stock and forgo the camera update.
So the real question is, how do you get out of a bootloop when your on a safestrap slot and you don't have the ability to flash back to stock because you took the update? @Hashcode
Sent from non rooted motoX :'(
matt99017d said:
How is one supposed to get out of a bootloop while loaded in a slot on safestrap? It only loops and never gives me a chance to load SS.
I recently took the update and was able to retain root. I am one of the few that it went from .51 to .54 and said failed update. luckily I was able to flash back to the original software and start over. So now for the time being I'll be staying with the ability to fxz back to stock and forgo the camera update.
So the real question is, how do you get out of a bootloop when your on a safestrap slot and you don't have the ability to flash back to stock because you took the update? @Hashcode
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
I'm assuming your non rooted motox sig is not accurate anymore lol. But I would take your question to rootzwiki. That seems to be where hashcode is doing his discussion and where others are posting questions who are in bootloops etc. You will probably get a better response. But if you can get to fastboot you should be able to flash recovery back on there and sort it out I think. But i haven't been keeping up with SS too much. I think i read some stuff over there about that though.
http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v36x/
jayboyyyy said:
I'm assuming your non rooted motox sig is not accurate anymore lol. But I would take your question to rootzwiki. That seems to be where hashcode is doing his discussion and where others are posting questions who are in bootloops etc. You will probably get a better response. But if you can get to fastboot you should be able to flash recovery back on there and sort it out I think. But i haven't been keeping up with SS too much. I think i read some stuff over there about that though.
http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v36x/
Click to expand...
Click to collapse
I flashed recovery first and tried to boot. No luck. Then I flashed back via rsd lite ( luckily ) and I'm back to being rooted.
Sent from non rooted motoX :'(
matt99017d said:
I flashed recovery first and tried to boot. No luck. Then I flashed back via rsd lite ( luckily ) and I'm back to being rooted.
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
next time just flash the system.img as well and you should have been good to go without losing any data.

[Q] new OTA update bricked my phone

I need some help. My phone is capable of booting into fastboot mode, but doesn't seem to be able to boot normally.
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
doctor_evil said:
I need some help. My phone is capable of booting into fastboot mode, but doesn't seem to be able to boot normally.
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
Click to expand...
Click to collapse
In the fastboot screen whats version is your booloader ?
Sent on my Gummy running Lenoto X
looks to be the one that I shouldn't have installed the OTA update. why in the F would they send me an update that isn't compatible with my bootloader version?
Well they're getting it back for a repair, I didn't pay 399 for a developer edition phone just to have a dang paperweight because they sent me an incompatible OTA update.
doctor_evil said:
looks to be the one that I shouldn't have installed the OTA update. why in the F would they send me an update that isn't compatible with my bootloader version?
Well they're getting it back for a repair, I didn't pay 399 for a developer edition phone just to have a dang paperweight because they sent me an incompatible OTA update.
Click to expand...
Click to collapse
They didn't send you a incompatible boot loader, the ota's always come with a new boot loader, so what I like to know is, what version is your boot loader , its Motorola's fault that you accepted the ota while having a custom recovery, had you read my thread here http://forum.xda-developers.com/showthread.php?t=2639102
You wouldn't have any issues.
If you don't want my help, thats fine by me, getting tired of this ota crap anyways
Sent on my Gummy running Lenoto X
Clearly you don't really want us to help or you would have answered the previous posters question. You also gave no details into if you had rooted the phone or unlocked the bootloader.
From the bootloader screen select the "factory" option.
I may agree with the op here. Moto supplied me with a 4.4 version for my dev ed. If I take an update, have an issue and moto still only provides 4.4 sbf what a I supposed to do?
However, OP you do need to supply more information as we can only speculate as to what your issue is.
Sent from my SM-P600 using Tapatalk
edthesped said:
I may agree with the op here. Moto supplied me with a 4.4 version for my dev ed. If I take an update, have an issue and moto still only provides 4.4 sbf what a I supposed to do?
However, OP you do need to supply more information as we can only speculate as to what your issue is.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Its not moto's fault, its up to the user to make sure you read the sticky notes, read the threads and search, moto puts out the ota for unrooted users.
Sent on my Gummy running Lenoto X
flashallthetime said:
Its not moto's fault, its up to the user to make sure you read the sticky notes, read the threads and search, moto puts out the ota for unrooted users.
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
However I purchased a Dev Ed phone. Motorola supplied me with a recovery firmware to restore my device to stock. I therefore expect the Factory supplied firmware to not brick my phone. If Motorola makes changes in an update that would cause previous versions of their software to damage phones when used as supplied Motorola needs to bear some of the responsibility. They can build a failsafe into the update that would prevent an attempt of a downgrade, supply upgrades that can safely be downgraded, add some kind of notification or not market "Dev Ed" phones for mass consumption.
Sent from my SM-P600 using Tapatalk
But the update clearly and concisely says, YOU CANNOT roll back to a previous firmware after applying said update.
Onus is on the user at that point.
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Tx Redneck said:
But the update clearly and concisely says, YOU CANNOT roll back to a previous firmware after applying said update.
Onus is on the user at that point.
Click to expand...
Click to collapse
Does it? I never saw that going to 4.4. As long as they put a new sbf up all should be fine.
Sent from my SM-P600 using Tapatalk
---------- Post added at 06:44 PM ---------- Previous post was at 06:43 PM ----------
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
Did you call Motorola?
Sent from my SM-P600 using Tapatalk
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
UPDATE:
I tried again to select the factory option in fastboot and unlike the previous times I had tried, this time seems to have fixed it. It booted up into Android OS. I think I'll try the OTA once again and see if this time is more successful, as if it screws up again I have a repair rma number and a fedex shipping label, but hopefully it does better this time.
doctor_evil said:
UPDATE:
I tried again to select the factory option in fastboot and unlike the previous times I had tried, this time seems to have fixed it. It booted up into Android OS. I think I'll try the OTA once again and see if this time is more successful, as if it screws up again I have a repair rma number and a fedex shipping label, but hopefully it does better this time.
Click to expand...
Click to collapse
ok OTA successful this time.
does anyone know if it's possible to boot the moto-x off a custom recovery using fastboot like we could for the galaxy nexus? I'd like to get root reinstalled but I don't want to mess with the current recovery, which should help I would think in regards to being able to install OTA updates without major issues.
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
Maybe try this out.. option 2 http://forum.xda-developers.com/showthread.php?t=2446515
doctor_evil said:
ok OTA successful this time.
does anyone know if it's possible to boot the moto-x off a custom recovery using fastboot like we could for the galaxy nexus? I'd like to get root reinstalled but I don't want to mess with the current recovery, which should help I would think in regards to being able to install OTA updates without major issues.
Click to expand...
Click to collapse
Unfortunately, I don't believe it's possible to fastboot boot recovery. It's how I did everything with my Galaxy Nexus and Nexus 7. I was disappointed to find out it isn't possible with the Moto X Dev edition even though I didn't buy one.
nhizzat said:
Unfortunately, I don't believe it's possible to fastboot boot recovery. It's how I did everything with my Galaxy Nexus and Nexus 7. I was disappointed to find out it isn't possible with the Moto X Dev edition even though I didn't buy one.
Click to expand...
Click to collapse
has anyone tried it with the google play edition of the moto-g? I'm wondering if there is a way to convert from a regular retail rom over to a GPE rom for the moto-x after google starts selling it. I remember reading about them going to sell a GPE of it. Hopefully the GPE rom would be friendlier than the retail rom
doctor_evil said:
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
Click to expand...
Click to collapse
I know you have fixed this now, but if you see the android with the red triangle and ! use the key combination pwr & up vol. That gets you into stock recovery and from there you should be able to boot up.

[Q] Can you help me get my Recovery Menu back and possibly Stock FW

Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.
xtremegamer13 said:
Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.
Click to expand...
Click to collapse
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update
OPOfreak said:
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update
Click to expand...
Click to collapse
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?
xtremegamer13 said:
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?
Click to expand...
Click to collapse
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.
dirtydodge said:
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.
Click to expand...
Click to collapse
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.
xtremegamer13 said:
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.
Click to expand...
Click to collapse
Odin back to stock
OPOfreak said:
Odin back to stock
Click to expand...
Click to collapse
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?
xtremegamer13 said:
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?
Click to expand...
Click to collapse
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776
OPOfreak said:
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776
Click to expand...
Click to collapse
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.
xtremegamer13 said:
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.
Click to expand...
Click to collapse
No my bad
Here
http://forum.xda-developers.com/showthread.php?t=2862299

Categories

Resources