I install CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.40.1 .
then i restart the phone it stuck in samsung logo.
my volume buttons are not working so i cant go in download mode
so is there a way out?
plz help me guys.............
npatil076 said:
I install CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.40.1 .
then i restart the phone it stuck in samsung logo.
my volume buttons are not working so i cant go in download mode
so is there a way out?
plz help me guys.............
Click to expand...
Click to collapse
Bro, can you enter the Recovery Mode? If yes, can you try re-installing CWM and see if it makes any difference. Do post your result. Hope I Helped
I tried to go recovery mode but it didn't go
some red,blue,yellow dots are coming.
npatil076 said:
I tried to go recovery mode but it didn't go
some red,blue,yellow dots are coming.
Click to expand...
Click to collapse
Bro, you can use this guide to force open Download Mode from odin. Make sure to follow the instructions as per the guide. Here is the link,
How to unbrick Samsung Galaxy Ace
If you don't have odin and the required files, then use the following guide. Go to the "Preparation" section and download all the necessary files. When your phone is not detected by odin, it's usually the driver's. Here is the link,
How to Install Stock ROM on Galaxy Ace Using Odin [GT-S5830]
Do post the result. Hope I Helped
Related
i was using clockwork mod to install the new kernel, i backed up my phone and enter into recovery mode, but after reboot i coudlnt get into my phone, i stucked at the main screen galaxy S, may b i installed a kernel that is not compatible, PLS help anyone >.<
can you access download mode?
while the phone is off press home, then volume + then power.
if so you can flash your phone with odin, check the forum on how to do this
ya i can go into recovery mode and download mode, i tried to restore the backup using clockworkmod , it seemed working after that i reboot i return to the clockworkmod recovery screen, den i reboot again and i did tat alot of timees, still stuck, so my only solution is to flash using Odin? that sounds very new to me, LOL, i m noob..
Thx for replying and trying to solve my problem =)
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Hi everyone. I tried to install CM9 yesterday, did every step same as it is in tutorial and the phone is only entering recovery mode. When i start it up, SAMSUNG appears, and after that it is entering recovery mode... I can also enter Download mode without problems. What to do guys? Thanks in forward.
P.S. Phone is i9001, i saw that there is a special section for i9001 after i wrote here. Sorry
matoripodlac said:
Hi everyone. I tried to install CM9 yesterday, did every step same as it is in tutorial and the phone is only entering recovery mode. When i start it up, SAMSUNG appears, and after that it is entering recovery mode... I can also enter Download mode without problems. What to do guys? Thanks in forward.
P.S. Phone is i9001, i saw that there is a special section for i9001 after i wrote here. Sorry
Click to expand...
Click to collapse
you need to flash a i9001 boot loader , download from My Android Collections, link below
use odin 4.43, and do the following:
Click on the OPS button, then select the AriesVE.ops
Click on the BOOT button, then select the Boot_loader.tar file downloaded
xsenman said:
you need to flash a i9001 boot loader , download from My Android Collections, link below
use odin 4.43, and do the following:
Click on the OPS button, then select the AriesVE.ops
Click on the BOOT button, then select the Boot_loader.tar file downloaded
Click to expand...
Click to collapse
It's working. Thank u so much for fast and perfect answer.
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
EDIT 2: I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
Click to expand...
Click to collapse
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
mahithm said:
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Click to expand...
Click to collapse
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
brijeshep said:
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I've followed it step by step and Odin still doesn't recognize my phone.
de1mos said:
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
I've followed it step by step and Odin still doesn't recognize my phone.
Click to expand...
Click to collapse
Try this link on how to install stock rom using odin along with all firmwares. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Do post the result. Hope I Helped
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
Click to expand...
Click to collapse
Glad to hear that buddy
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
ShardulS. said:
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
Click to expand...
Click to collapse
Bro, this question is solved. See "Edit 2" in the question where the author has specified what he did to solve this problem.
I have galaxy ace gt-5830, my volume down and up button isnt working and the mobile is stuck at "samsung" word when I boot so i need to download another firmware so any ideas?
FalconiZer said:
I have galaxy ace gt-5830, my volume down and up button isnt working and the mobile is stuck at "samsung" word when I boot so i need to download another firmware so any ideas?
Click to expand...
Click to collapse
enter in recovery mode (home + power) and falsh USR ULTIMATE stock rom
http://forum.xda-developers.com/showthread.php?t=2338702
daniga74
FalconiZer said:
I have galaxy ace gt-5830, my volume down and up button isnt working and the mobile is stuck at "samsung" word when I boot so i need to download another firmware so any ideas?
Click to expand...
Click to collapse
It seems that you are in great trouble, according to my knowledge u need to get your device serviced somewhere or if can get the tool that you need
. You need a hardware called Downloader
if u can get it you jus need to plug it into your device on the Micro Usb port i,e the charging hub and switch on your deive it will straight away take you to the download mode Then unplug the Downloader and plug in the usb cable and flash it to stock using odin,
I have given a thread how to flsah galaxy ace back to stock using odin check that too...
Good Bye
FalconiZer said:
I have galaxy ace gt-5830, my volume down and up button isnt working and the mobile is stuck at "samsung" word when I boot so i need to download another firmware so any ideas?
Click to expand...
Click to collapse
Flash a TOUCH recovery and wipe data/factory reset and cache partition to avoid the bootloop