[Q] No mobile data after flashing a rom moto x - Moto X Q&A

Hello I've been trying to flash flash a custom rom on a Moto X (XT1053) when I install it everything works fine but there is no mobile data, my carrier is Nextel.
Could someone tell me a sollution for this trouble
Roms attemped to flash:
Cyanogenmod 11
Paranoid Android
Carrier: Nextel Mexico
Model: Moto X (XT1053)
Rom: stock 4.4.2

Notreallygoodflashing said:
Hello I've been trying to flash flash a custom rom on a Moto X (XT1053) when I install it everything works fine but there is no mobile data, my carrier is Nextel.
Could someone tell me a sollution for this trouble
Roms attemped to flash:
Cyanogenmod 11
Paranoid Android
Carrier: Nextel Mexico
Model: Moto X (XT1053)
Rom: stock 4.4.2
Click to expand...
Click to collapse
Have you input the proper APN settings for your carrier "Nextel Mexico"?

A bit mire specific please
samwathegreat said:
Have you input the proper APN settings for your carrier "Nextel Mexico"?
Click to expand...
Click to collapse
Where can I find those settings
Im still a noob : /

Notreallygoodflashing said:
Where can I find those settings
Im still a noob : /
Click to expand...
Click to collapse
OK. You will need to get the APN settings from your carrier. I tried searching, but all of the relevant information seems to be in Spanish. You can probably find it somewhere on your carrier's website.
Once you have the APN info, you should go into Settings. Then under "Wireless & Networks", there should be a more button. Click more and there should be an option for Mobile Networks. You should find the APN settings inside. I'm not sure if this is exactly where you will find the settings on CM11, but it should be similar. Those instructions are for the stock ROM.
Without the proper APN settings, your phone will not get any data, as it does not know the gateway it should send the data through...that's what the APN settings are for.
Good Luck

i think I found it
samwathegreat said:
OK. You will need to get the APN settings from your carrier. I tried searching, but all of the relevant information seems to be in Spanish. You can probably find it somewhere on your carrier's website.
Once you have the APN info, you should go into Settings. Then under "Wireless & Networks", there should be a more button. Click more and there should be an option for Mobile Networks. You should find the APN settings inside. I'm not sure if this is exactly where you will find the settings on CM11, but it should be similar. Those instructions are for the stock ROM.
Without the proper APN settings, your phone will not get any data, as it does not know the gateway it should send the data through...that's what the APN settings are for.
Good Luck
Click to expand...
Click to collapse
This settings
Screnshot from my moto g

Notreallygoodflashing said:
This settings
Screnshot from my moto g
Click to expand...
Click to collapse
Yes! That is the one. Just get the appropriate settings for Nextel Mexico and and create a new APN on CM11. I'm guessing there aren't any when you first flash it?
Were you able to find the appropriate settings on the carrier website? Or is "Telcel" (as shown on your Moto G screenshot) the same as "Nextel Mexico"?

moto g
samwathegreat said:
Yes! That is the one. Just get the appropriate settings for Nextel Mexico and and create a new APN on CM11. I'm guessing there aren't any when you first flash it?
Were you able to find the appropriate settings on the carrier website? Or is "Telcel" (as shown on your Moto G screenshot) the same as "Nextel Mexico"?
Click to expand...
Click to collapse
No, that is from my other phone, my moto g

Here the same, nextel is not publishing their APN settings so I think we are just a little f***ed up...
Read about taking from original ROM and install it as a zip but it was for other phone so I don't know if that could work
Also this one have some trouble with proximity sensor so I'm not even able to do a call without headset

apn nextel screen captures
Hi!, I had the same problem, got a TWR backup and re installed the original firmware: 161.44.35.ghost_row.Nll.en.MX
You don't have to do this, maybe you can set up them from the screen captures that I've just made
(all of them are in a rar file, check filename's order)
Hope it helps, just let me know if that worked
edit: remember, they are only valid for nextel mexico

Related

[Q] xt862 can't use cdma 3G

My phone is Verizon Droid 3 XT862.
It can't use cdma 3g or 1x network.
SMS and voice is normal. WIFI is normal too.
If i use GSM card, same problem appears.
I flashed the rom , changed the file named 'ppp-rils.option'.
But nothing happened.
Please help me.
thanks.
powerword said:
My phone is Verizon Droid 3 XT862.
It can't use cdma 3g or 1x network.
SMS and voice is normal. WIFI is normal too.
If i use GSM card, same problem appears.
I flashed the rom , changed the file named 'ppp-rils.option'.
But nothing happened.
Please help me.
thanks.
Click to expand...
Click to collapse
Fully restore your phone using my Fast / Easy unbrick method, just search the general section. (All it does is restore your phone to complete stock.)
You can try other stuff, but this method seems to fix most issues that aren't "easy" to fix.
I will try this method.
But I want to know if there are something can be changed or flashed other than this rom.
I want to fix my phone's network.
It not work on cdma , gsm or wcdma.
I flash xt883 rom, but nothing happened.
Can i flash radio? Change hardware setting.
who can tell me.
powerword said:
I will try this method.
But I want to know if there are something can be changed or flashed other than this rom.
I want to fix my phone's network.
It not work on cdma , gsm or wcdma.
I flash xt883 rom, but nothing happened.
Can i flash radio? Change hardware setting.
who can tell me.
Click to expand...
Click to collapse
You don't need the xt883 ROM in order to use the phone on any foreign gsm. The phone must be unlocked by Verizon, then you need to flash the xt883 radio.img, then edit/replace the build.prop. I would flash back to stock first, since the xt883 is a weird ROM, but you probably don't have to. There are already plenty of threads where the explanations have been given, so look around: search Verizon D3 on T-Mobile, D3 on AT&T/T-Mobile, etc.
You will have to turn off 'automatically select operator' in settings and choose manually the one you're using. T-Mobile users will only get edge and below, while AT&T users will get 3g.
Droid 3 with stock xt862 ROM working on T-Mobile via xt883 radio.img & custom build.prop
BenSWoodruff said:
You don't need the xt883 ROM in order to use the phone on any foreign gsm. The phone must be unlocked by Verizon, then you need to flash the xt883 radio.img, then edit/replace the build.prop. I would flash back to stock first, since the xt883 is a weird ROM, but you probably don't have to. There are already plenty of threads where the explanations have been given, so look around: search Verizon D3 on T-Mobile, D3 on AT&T/T-Mobile, etc.
You will have to turn off 'automatically select operator' in settings and choose manually the one you're using. T-Mobile users will only get edge and below, while AT&T users will get 3g.
Droid 3 with stock xt862 ROM working on T-Mobile via xt883 radio.img & custom build.prop
Click to expand...
Click to collapse
I flashed xt862 rom .
Calls and text is OK whether GSM or cdma.
Network is wrong whether GSM or cdma.
I changed APN settings, nothing happened.
What can i do next.
powerword said:
I flashed xt862 rom .
Calls and text is OK whether GSM or cdma.
Network is wrong whether GSM or cdma.
I changed APN settings, nothing happened.
What can i do next.
Click to expand...
Click to collapse
I'm not sure what is wrong with your connection, but mine has problems sometimes where the phone will not recognize any available gsm networks. It's sometimes like this after I reboot my phone, but if changing my settings doesn't work, rebooting again will usually work.
Is your phone unlocked by Verizon? Did you flash the xt883 radio.img since changing your ROM? Did you replace your build.prop file with the tweaked one? I will try to find these resources for you if you still need them, but you should be able to find them by searching if you haven't already. After doing these things, you just have to reboot then go to your settings and tell it to prefer gsm. On T-Mobile, you wont get umts. On AT&T you will get gsm and umts.
In settings, you need to select wifi & network settings -> mobile networks -> network mode -> then choose gsm/umts, back to mobile networks -> under gsm/umts settings, click select network, then choose gsm only for T-Mobile or automatic for AT&T, then click operator select, select network and choose your operator. Select automatically will have a check box next to it and you should deselect it. I didn't have to put in my apn settings, because my sim card provides those automatically.
If these settings tweaks don't work for you then I really have no clue what will fix it because it is likely that something else is wrong. I can't be of much more help without seeing the device. I would suggest to keep playing around in settings and just use your head to see why it's not connecting. If you are getting voice and text service on your carrier, data shouldn't be a problem if your settings are done correctly.
Good luck!
Droid 3 with stock xt862 ROM working on T-Mobile via xt883 radio.img & custom build.prop

[Q] LTE gone after flashing custom Rom

Hi guys,
While ago i got my factory unlocked Htc one from ATT.
I use to get LTE when i was running stock, since installing custom rom my phone is not showing LTE/4G sign, i only get H or H+
my phone is rooted/unlocked-bootloader/ARHD 40.3/S-OFF
any helps guys, thanks
biopl said:
Hi guys,
While ago i got my factory unlocked Htc one from ATT.
I use to get LTE when i was running stock, since installing custom rom my phone is not showing LTE/4G sign, i only get H or H+
my phone is rooted/unlocked-bootloader/ARHD 40.3/S-OFF
any helps guys, thanks
Click to expand...
Click to collapse
check your APN settings.
nkk71 said:
check your APN settings.
Click to expand...
Click to collapse
APN is on default by carrier
biopl said:
APN is on default by carrier
Click to expand...
Click to collapse
dial *#*#4636*#*# and check network setting is set to GSM/WCDMA/LTE AUTO
Are your speeds any slower? I think some carriers call different things 4G, so with a non carrier specific ROM, you get a different graphic.
I think there's a way of changing it in the build prop.
alray said:
dial *#*#4636*#*# and check network setting is set to GSM/WCDMA/LTE AUTO
Click to expand...
Click to collapse
it is already on that, still no LTE
have you updated your device firmware ?
sirus20 said:
have you updated your device firmware ?
Click to expand...
Click to collapse
I'm running the latest firmware
something tells me that this updated firmware has something to do with it.i have the same problem here i live in greece and i can't get lte either.damn..i know for a fact that the model i own mid 071000 or something like that is capable of using my carriers lte band. something is wrong with either the radio or with the roms i used in the past.it is going to be very hard to find the right compination..im gonna go to a store and see what the latest radio on their devices that came from factory for greece was and try to make something out of that..to make matters worse i didn't even saw LTE in the 4.3 updated firmware either..
sirus20 said:
something tells me that this updated firmware has something to do with it.i have the same problem here i live in greece and i can't get lte either.damn..i know for a fact that the model i own mid 071000 or something like that is capable of using my carriers lte band. something is wrong with either the radio or with the roms i used in the past.it is going to be very hard to find the right compination..im gonna go to a store and see what the latest radio on their devices that came from factory for greece was and try to make something out of that..to make matters worse i didn't even saw LTE in the 4.3 updated firmware either..
Click to expand...
Click to collapse
i dont think its the firmware, it happened to me on earlier firmwares aswell.
biopl said:
APN is on default by carrier
Click to expand...
Click to collapse
doesn't mean that they are correct, my carrier's default APN settings are one thing, but in order to get LTE to work, I need to manually add an APN with the correct settings.
nkk71 said:
doesn't mean that they are correct, my carrier's default APN settings are one thing, but in order to get LTE to work, I need to manually add an APN with the correct settings.
Click to expand...
Click to collapse
i have checked with my carrier about APN setting but still no signs of LTE or 4G
BenPope said:
Are your speeds any slower? I think some carriers call different things 4G, so with a non carrier specific ROM, you get a different graphic.
I think there's a way of changing it in the build prop.
Click to expand...
Click to collapse
i dont receive 4G/LTE in general, i have tried different roms too, nothing seems to work

neither can make or recieve call when my network is set to GSM/WCDMA/LTE auto mode

I have a LG G Flex model LG-D958. I have this weird problem with making or receiving phone call. If I set the network mode to only GSM mode, then I can make call out and receive incoming phone call. Other than this setting, example when set to GSM/WCDMA/LTE auto mode, I could only access the internet network in WCDMA or LTE or EDGE mode for DATA access BUT could not receive or make phone call. If I make a call out, it will cut off after several seconds. When I tried calling to my this mobile number from another phone, I could only hear the annouced voicecall telling me that it could not be reached at the moment. Then, when I set it back to GSM only mode..then making or receiving call is back to normal.
My ANdroid version is 4.4.2. Can someone advise me what I can do to get my Flex works again? Thank you
This is an L23? Where are you located? Its to my understanding those are sold gsm Sim unlocked.
Is this a new Sim card? Is it a GSM network Sim?
Have you changed the software at all?
Call problems under different network mode
Supertacomonkeyexplosion said:
This is an L23? Where are you located? Its to my understanding those are sold gsm Sim unlocked.
Is this a new Sim card? Is it a GSM network Sim?
Have you changed the software at all?
Click to expand...
Click to collapse
My model is LG-D958. I am not too sure what you meant L23?
I am from Thailand but currently in Malaysia.
Yes, this model is sold in THailand with open sim.
Yes, it is a new Sim card with GSM network that include 3G/4G network access.
THe software I see from the phone setting is D95820d-IND-XX; Android version is 4.4.2
appreciate your help..thanks
I'm not sure why you would have to change these radio settings at all. It should work right out of the box, except for your carriers specific APN settings.
Have you tried a factory reset? Start from scratch? Have you made any software changes?
Supertacomonkeyexplosion said:
I'm not sure why you would have to change these radio settings at all. It should work right out of the box, except for your carriers specific APN settings.
Have you tried a factory reset? Start from scratch? Have you made any software changes?
Click to expand...
Click to collapse
Yes, it supposed to be.. I mean it works for everything except cannot make call if I set it to GSM/3G/4G auto mode. I have done a hard reset but the problem still persists. I was given this phone by my cousin and I am not sure whether any softwares was changed BUT I understand that the original Android version should be 4.2.2 - but now it is 4.4.2, do you think this could be the reason that is the cause of this weird problem?
Maybe it is good to totally unflash and reflash it back to its original software version. Can you guide me to doing this?
THank you
Or is there any way that i can run a diagnostic test from within the phone itself? Please advise too, thank you
davidmok555 said:
Or is there any way that i can run a diagnostic test from within the phone itself? Please advise too, thank you
Click to expand...
Click to collapse
According to the lg website it should only be on 4.2.2.
http://m.lg.com/au/smartphones/lg-G-Flex-D958
I think a fresh start using the lg flash tool would be best.
Make sure you get the right firmware/tot, for your model.
Can you ask ,whomever you got the phone from what and why he changed the software?
Supertacomonkeyexplosion said:
According to the lg website it should only be on 4.2.2.
http://m.lg.com/au/smartphones/lg-G-Flex-D958
I think a fresh start using the lg flash tool would be best.
Make sure you get the right firmware/tot, for your model.
Can you ask ,whomever you got the phone from what and why he changed the software?
Click to expand...
Click to collapse
Yes, I have tried flash already but that only update the phone firmware BUT the Android version could not be changed? Any guide as to how I can flash the entire phone to its original firmware that comes with Android Version 4.2.2.? Thanks
Anyone can help advise me how I could downgrade android version 4.4.2 to 4.2.2. in my LG Flex Model LG-D958?
davidmok555 said:
Yes, I have tried flash already but that only update the phone firmware BUT the Android version could not be changed? Any guide as to how I can flash the entire phone to its original firmware that comes with Android Version 4.2.2.? Thanks
Click to expand...
Click to collapse
Hi..can you advise? Thanks
davidmok555 said:
Hi..can you advise? Thanks
Click to expand...
Click to collapse
On the LG website, or ask someone on the L23 section. Someone may have posted it already.
Can anyone help? Where can I find the necessary steps to do a re-flash?

no cellular network

Hi there:
I had a rooted nexus 6 with Android 6.
I was playing with chmod and root and messed up some system permissions.
I have re-installed several Nexus 6 Google images 5.1 6.0 etc...
I have everything except cellular signal. It says no service and sometimes no sim card.
I have taken my sim and put it in another phone and it worked.
When I go to *#*#4636#*#*
It says GSM: emergency service only and GPRS service: disconnected.
I tried to change the network type to GSM only and others with no success.
Any help to further diagnose this would be appreciated..
Thanks
do you have an apn entered? and is it correct?
simms22 said:
do you have an apn entered? and is it correct?
Click to expand...
Click to collapse
Very good point.
When I flashed 6.0.1
under cellular network settings , I only see Data raoming, Preferred network type and System select.
no APN settings
When I re-flashed 5.0.1 , I could see the apn settings, but when I go to it, it says something like that the user doesn't have permission to view the settings. I even tried to add a new settings and save it, but the message stayed there and I see no APN list at all..
I might have messed up the APN permissions with chmod, but I would think a system re-flash would have corrected it..
Thanks
orcking said:
Very good point.
When I flashed 6.0.1
under cellular network settings , I only see Data raoming, Preferred network type and System select.
no APN settings
When I re-flashed 5.0.1 , I could see the apn settings, but when I go to it, it says something like that the user doesn't have permission to view the settings. I even tried to add a new settings and save it, but the message stayed there and I see no APN list at all..
I might have messed up the APN permissions with chmod, but I would think a system re-flash would have corrected it..
Thanks
Click to expand...
Click to collapse
are you using sprint by chance?
simms22 said:
are you using sprint by chance?
Click to expand...
Click to collapse
No TMO
Any suggestions please...
orcking said:
No TMO
Any suggestions please...
Click to expand...
Click to collapse
i ask if sprint because sprint doesnt use apns. tmo does though.
orcking said:
No TMO
Any suggestions please...
Click to expand...
Click to collapse
Does your IMEI match the number on your SIM card tray?

How should I downgrade or enable GSM/WCDMA option on Sprint LG G4 LS991?

Hey, guys this is my first post here on XDA so please apologize me for any inconvenience.
I bought LG G4 Sprint i.e., LS991 yesterday from someone else I don't have contact with him now. The sim card which works on 3G was working fine when I bought it. But, then I tried to go in settings and then to mobile network and I opened the list of network bands and unfortunately I was only able to find only two option that are 1. CDMA/LTE and 2. CDMA.
I was forced to select one from it and boom no signals at all and status says searching for service. Where is the GSM option? I'm sure that this phone is already unlocked and it is from Sprint.
Also, I'm on the latest software version that is LS991ZVD. Can I go back to ZV6 International ROM or will it brick my device?!
emad26 said:
Hey, guys this is my first post here on XDA so please apologize me for any inconvenience.
I bought LG G4 Sprint i.e., LS991 yesterday from someone else I don't have contact with him now. The sim card which works on 3G was working fine when I bought it. But, then I tried to go in settings and then to mobile network and I opened the list of network bands and unfortunately I was only able to find only two option that are 1. CDMA/LTE and 2. CDMA.
I was forced to select one from it and boom no signals at all and status says searching for service. Where is the GSM option? I'm sure that this phone is already unlocked and it is from Sprint.
Also, I'm on the latest software version that is LS991ZVD. Can I go back to ZV6 International ROM or will it brick my device?!
Click to expand...
Click to collapse
Bro, I found this on this site:
1. go to settings and add new APN manually (fill the values according to your carrier).
2. in the APN type input "default,dun,fota".
3 .save.
4. Restart phone and you are good to go.
Works like a charm... The signal loss thing happened to me too. Don't select either option after you fix it. Go to backup and reset and reset your network settings. I think this is what I did to solve the problem.
emad26 said:
Hey, guys this is my first post here on XDA so please apologize me for any inconvenience.
I bought LG G4 Sprint i.e., LS991 yesterday from someone else I don't have contact with him now. The sim card which works on 3G was working fine when I bought it. But, then I tried to go in settings and then to mobile network and I opened the list of network bands and unfortunately I was only able to find only two option that are 1. CDMA/LTE and 2. CDMA.
I was forced to select one from it and boom no signals at all and status says searching for service. Where is the GSM option? I'm sure that this phone is already unlocked and it is from Sprint.
Also, I'm on the latest software version that is LS991ZVD. Can I go back to ZV6 International ROM or will it brick my device?!
Click to expand...
Click to collapse
you cannot downgrade has antirollback yuo will brick possibly hardbrick.
i dont know the method but i believe there is possibility even without root but dont quote me on tht
as mine has managed to stay on zv6 since day one

Categories

Resources