[Q] Help my 9305 - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken

x_biff said:
Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken
Click to expand...
Click to collapse
if you want to flash official stock rom again you will not need 3 files. go to http://www.sammobile.com/firmwares/ search for i9305 in the firmware searchbar and download the firmware for your country/carrier and after that flash it with odin. select the tar. md5 file in AP button in odin and hit start. all the needed files are in 1 package!
in odin the boxes auto reboot and F. reset time should be checked and re-partition should be unchecked

odin
not work , pit file defect

x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719

viktorak said:
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719
Click to expand...
Click to collapse
already tested with 4 cables nexus 4, original samsung, nokia and new highway wiko

Your partition table might be corrupted. You can try to flash with a pit file.
Search for i9305 pit file, DO NOT USE ANY OTHER VERSION pit file.

Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin

1Ishara said:
Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin
Click to expand...
Click to collapse
enter into download mode with the jig

x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591

MaHo_66 said:
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591
Click to expand...
Click to collapse
pit file only not work , need the unpacked rom (csc modem. tar)

Related

[Q] anyone can help me to flash back my krean version rom?

HI,everyone,
i have an problem about my 'I9000' ,it is korean version and type code is
'SHW-M110S' in krean,
i flash the rom 'jh1' by the tools 'odin',
and select "re-partition",but now the function of mobile is failed,
i can not call and sent sms.
the IMIE code can not be query,display :unknown:,
now i want to flah the korean M110S ROM "DH9",use odin.exe
but always display failed
counld anyone tell me how to do?
if use odin can do,how to set the pararmeter?
if i need to the pit file?which one?if need to re-partition?and so on.
tks a lot
Start Odin, tick re-partition, select 512.pit (do not select PDA, Phone, CSC or anything else).
Put phone to download mode and connect to pc.
Once Odin finds your phone (the first ID window turns yellow and shows COM ID), click start.
It takes up to ten minutes until Odin finishes (Pass! text appears), and phone will turn off automatically.
In Odin, press reset button and untick re-partition.
Remove the battery and insert it again.
Put phone to download mode and connect to pc.
Select the M110S-NPS-IMAGE-REV03-DH09-2002-USER.tar archive as PDA and press start. After Odin completes your phone will be booted and restarted in Online mode automatically.
I know most people flash .pit file at the same time with the ROM itself, but this way is described in Samsung service manual so I personally do it this way.
If your IMEI is unknown sounds that you have wiped your efs folder.
This happens when you select clear efs in Odin.
tks very much
i followed the method to do
but
after 'Select the M110S-NPS-IMAGE-REV03-DH09-2002-USER.tar archive as PDA and press start.' the odin display failed when process :modem.bin;
can you help me again for this problem?
tks and hoghly appreciation
the odin's message as follows:
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.rfs
<ID:0/010> dbdata.rfs
<ID:0/010> factoryfs.rfs
<ID:0/010> modem.bin
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
maybe try it again with 513.pit ?
did you select repartition on the 2nd try when you used the 512.pit ?
yes i am sure,and i have try the 513.pit.
have the same error
i want the pit file for korean version
where can i find it?
help!!!
seem me do u post rom this site may i can fix
sornvichian said:
seem me do u post rom this site may i can fix
Click to expand...
Click to collapse
tks
but the korean rom is about 300M
how can i post here?
i download it on here
http://www.mediafire.com/?sharekey=...c276fc89cb2aeee33b0a5e6fe9806c5747305ce783dac
this verson is DG14,
i also have DG23,and DH09,all failed.
have the same problem! its refusing to install via odin! any tips?
They have diffent hardware. Really dont flash it.
Its made for sk telecom and they have different way of sending sms and alsi korean galaxys has dmb
Sent from my GT-I9000 using XDA App
if you can read Chinese, you can try the below method
h ttp://bbs.gfan.com/viewthread.php?tid=259358&extra=&page=1

Black Screen after Samsung Boot

I was running Webstar's "Ultimate" ROM 3.0, after which I decided to go to stock and then upgrade to a different ROM.
I flashed stock 2.2 stock firmware with Odin 1.7 with 803 pit (from samfirmware.com). Now my phone is stuck on a black screen and vibrates after the Samsung boot animation.
I had disabled the lagfixes and tweaks from recovery but the files still stayed back on the sdcard.
This is what Odin says :
<ID:0/023> Added!!
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Initialzation..
<ID:0/023> Get PIT for mapping..
<ID:0/023> Firmware update start..
<ID:0/023> cache.rfs
<ID:0/023> factoryfs.rfs
<ID:0/023> modem.bin
<ID:0/023> param.lfs
<ID:0/023> zImage
<ID:0/023> Removed!!
<ID:0/023> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Recovery mode/Download mode works for me. I tried clearing cache/factory reset, it worked, but my phone's still stuck on black screen.
I tried reading through similar threads on the forum, but most of that hasn't helped me. I also get the yellow screen something like -----|---- (which I haven't tried with Kies)
I'm downloading the 2.1 stock firmware now, I will try flashing it with Odin.
I just got this phone last week so I deserve to panic a little :\
Same issue with my friend phone
she said was playing with apps in the markets then crash
then Black screen after the Big S show.
Tried wiping cache and data, not working
Flash it with stock 2.1, not working ~
stucking and need assistance
video of booting
I tried 2.1 firmware without PDA and Re Partition on Odin, still doesn't work.. It says successful but stuck at black screen post reboot.
Edit: *Finally works*
I did an odin flash with 512 pit, with repartition selected. After boot format sd/factory reset and clear cache. REMOVE USB, and reboot.
Hope this works for her.
killslayer said:
I tried 2.1 firmware without PDA and Re Partition on Odin, still doesn't work.. It says successful but stuck at black screen post reboot.
Edit: *Finally works*
I did an odin flash with 512 pit, with repartition selected. After boot format sd/factory reset and clear cache. REMOVE USB, and reboot.
Hope this works for her.
Click to expand...
Click to collapse
mind finding the exact link for the Odin and Pit and Firmware for me ?
i wanna try to exactly the same thing, hopefully will work for her too
wildbat000 said:
mind finding the exact link for the Odin and Pit and Firmware for me ?
i wanna try to exactly the same thing, hopefully will work for her too
Click to expand...
Click to collapse
Sorry I dont have the links anymore, you'll have to look around a bit. I got the firmware from samfirmware.com
You can get the firmware for your area there and search for odin 1.7 with pit files, shouldn't be hard.
Still stucked
anyone know a fix
got Download mode and Recovery Mode
but just won't boot up .... (as shown in the video)
anyone have a clue?
Flash an old Eclair firmware that uses 512.pit. (In fact, all of them should.) Get them off www.samfirmware.com
did it many times~ not working

[Q] Can only use 'Download Mode'

Hi guys and girls.
I've been frantically searching XDA for the last few hours for a definitive answer, but to no avail, so thought it's about time I just asked!
I have in my possession a Samsung Galaxy S19000, that will only go into download made.
Here's how it happened........
This morning, I was given the phone by my brother in law and asked to root it and upgrade it to a newer/better rom. When it was passed
to me, it was.....
Firmware: 2.2.1
Baseband: 19000XXJY
Kernel: 2.6.32.9
[email protected] #1
Build: FROYO.XXJPY
After a successful root and upgrade, the phone ended up like this...
Firmware: 2.3.7
Baseband: 19000XXJVK
Kernel: 2.6.35.14-g3088622
Build: CyanogenMod-7.2.0-galaxysmtd
The new Rom, as nice as it was, wasnt what he wanted, so he asked me to restore it back to it's stock state. I went into CMW and did a restore, but it failed, and now the phone will only go into download mode.
I've tried flashing a stock rom via Odin, but it got as far as the 'Nand write' stage, then hangs.
Kies doesn't show up the device in 'Emergency firmware recovery' either.
I no all is not lost, so I'm not giving up. Any help will be much appreciated.
:fingers-crossed:
Can you post the whole Odin Log?
Normally this happen when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
Maybe it helps to flash the pit file to repartition.
To add.....
When the phone is off, it displays the 'phone and computer with an explanation mark triangle inbetween symbol', and Kies doesnt recognise it. When I enter download mode, Kies hangs at 'Connecting' for.....well..ever! So atleast I know it's recognised by my PC (ish) and it isn't completely dead :silly:
I had the same thing with the triangle a few months ago.
I just flashed a Stock Firmware with Repartition. Just be sure with Odin that you have ticked the right things Afterwards it worked.
Thankyou for you reply, and sorry for the delay posting back. God damn new user restrictions!!!
KUN1 said:
Can you post the whole Odin Log?
Click to expand...
Click to collapse
Heres what Im getting...
Code:
<ID:0/009> Added!!
<ID:0/009> Removed!!
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
First try it with Repartition. If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
KUN1 said:
First try it with Repartition.
Click to expand...
Click to collapse
You'll have to excuse me, I've never had problems problems before, so I've only had to use the PDA box till now.....
Is that the re-partition tick box, or the re-partition PIT file box??
KUN1 said:
If that doesn't work, you may have a look at this thread http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Click to expand...
Click to collapse
Christ that looks involved doesn't it! I think that be a last resort as it looks like I'll need to clear a day in my diary before I start!
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
KUN1 said:
For the moment you can ignore the second thread
Find a 3 File (PDA, Phone, CSC) Firmware ( maybe samifirmware.com ) , then download the 512 pit file for the GALAXY S! and the flash the Firmware with pit file and repartition.
Click to expand...
Click to collapse
SOLVED
I couldnt sleep, so decided to have another bash at getting this phone going again.
Many many thanks to KUN1 for hunting down and PM'ing me the necessary Odin MD5 and PIT files to use for the method he posted above.
:victory:Success:victory:
You've been a life saver sir :good:
haha no problem

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?
Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Even if you get a whole rom, it's good. Flash with odin without the pit
Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!
Nothing to do with the the dll file. Congrats for a working phone.
Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing

[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen

[Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode screen
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin. It created a big problem for me. I couldn't go in to download mode after this.
So finally I purchased USB jig to enable Download mode (last option to make mobile in download mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box showing some port no. Above output comes when i continue with installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
vishu_10d said:
Hi,
I was trying to install new ROM through Odin software. I tried with Odin3 one click downloader. I also tried using KI2 with Boog's Kernel odin software. but both are failing. Shows FAIL with following output -
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
Another problem is that for my Samsung Captivate mobile... Download mode screen stopped coming ( I think it happened when by mistake I updated mobile's bootloader with some Corn s/w bootloader by selecting the file in Bootloader field in Odin s/w. It created a big problem for me. I couldnt go in to downlaod mode after this.
So finally I purchased USB jig to enabled Download mode (last option to make mobile in downlaod mode).
Even though I can update the firmware using Jig. But still download mode screen is not coming.But when I connect mobile to computer with usb cable, after using USB jig, I could see that odin shows "ADDED" with yellow box with some port number. Above output is comes when i continue installing tar/md5 file of ROM with Odin. but it fails. So i am unable to use my mobile... .
It worked when I updated ROM with following package - GT_I9000_ZSJPK_ZSJPG_OZSJPG. It contains PDA, PHONE and CSC files.
First I did partition with file s1 odin 20100512.pit and after that I selected these three files in corresponding fields in Odin software and clicked on start button. It worked and i could see FROYO installed in my captivate phone. But this ROM update is for I9000 mobile. so all functionality is not working properly. what i mean to say here that I can update mobile with I9000 ROM. but not with captivate ROM.
My mobile's situation is that it has no software installed. Just as a hardware. No Bootloader, Nothing. Even AT & T screen doesnt come when I start my mobile. It is totally dead.
Can anybody please help me ? how can I resolve this problem. I searched all the thread in forum. But it is not helping me to resolve my problem. .
Issues are -
AT & T screen is not coming when i start the phone.
Download mode screen is not coming when i start the phone.
Just Assume that I have captivate phone without partition, without bootloader ...
Can anybody please help ?
Click to expand...
Click to collapse
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
BWolf56 said:
Here's what you need: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Grab Odin KK4 with bootloaders from that thread. That should get your phone back up. If you wanna get farther and flash a custom ROM, follow http://forum.xda-developers.com/showthread.php?t=1350266
Click to expand...
Click to collapse
Thanks for the reply...
I tried with Odin one click downloader also... but it is failing... attaching the image...
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Try a different micro usb/usb cable. And also a different usb port if the different cable doesn't work.
And if that fails...some Captivates don't like One Clicks, so see my post here...http://forum.xda-developers.com/showthread.php?p=30840818
Then use the [Utility]KK4 Easy Root by Red_81 http://forum.xda-developers.com/showthread.php?p=26710533 to get Root and KK4 Corn Kernel that has CWM Recovery...if u want.
Another helpful sticky thread...http://forum.xda-developers.com/showthread.php?p=33227541
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
I followed the steps written in the forum above. But that is not working my case. I tried the steps in different computer with diff OS installed. but still same problem.
Is there any way to get PHONE, PDA, CSC file separately for i897 ? I could install I9000 in my samsung captivate mobile which had these files. So just thought, if i can get these files for i897, probably it should work?
Any Idea where i can get these files?
Re: [Q] Samsung Captivate phone is dead, not showing AT & T screen, download mode scr
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
^
Here ya go...http://forum.xda-developers.com/showthread.php?p=19587108
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hi,
Still my problem is same. I went through the link. but that is also not helping.
In my phone, I cant see download screen, even though if i use USB jig.
When I run Odin s/w, I can see in odin as port "Added" when Connect my mobile with computer using usb port.
Usually Odin show port added when u are in download mode. But here in my case, when i first USB jig and then connect to computer, download mode screen message and image doesnt come. it shows nothing(like no display). But I can see , Odin shows port Added. and I could update kernel, do partitions etc. But when I select Image file as PDA. and click start. It always fails.
Is it happening because i cant see download mode screen ?
1. What firmware I need to install and how which contains code for showing download screen ?
2. Or can anybody provide me all files i.e. PIT, Bootloader, PDA, Phone, CSC for odin so that i can select all files in respective fields under Odin software and start update?
Please help.
One more thing i have noticed.. here is the output of odin when i update my mobile with following files of I9000 model. while trying images for my captivate mobile, I found a zip file for model GT I9000 and package name was -GT_I9000_ZSJPK_ZSJPG_OZSJPG. It had three files as - 1. CSC_OZSJPG.tar.md5. 2. PDA_ZSJPK.tar.md5. 3. PHONE_ZSJPG.tar.md5.
I selected this files in corresponding PHONE, CSC, PDA fields in odin and it updates phone successfully with the following output -
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_ZSJPK.tar.md5 is valid.
<OSM> PHONE_ZSJPG.tar.md5 is valid.
<OSM> CSC_OZSJPG.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> param.lfs
<ID:0/017> zImage
<ID:0/017> factoryfs.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> modem.bin
<ID:0/017> cache.rfs
<ID:0/017> Removed!!
<ID:0/017> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Added!!
<ID:0/018> Removed!!
<ID:0/019> Added!!
But even though i can see my phone with I9000 model image installed. but most of the operations it doesnt work. might be becoz image is not fully compatible with Captivate model. so no use.
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
x0ne215 said:
You should always be able to see the download screen no matter what fw you're on. I could see it on 2.3.5, 4.2.2, etc. Even with a jig you can't force it into download mode? Did you make it or buy it?
Click to expand...
Click to collapse
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
vishu_10d said:
I purchased a jig for samsung captivate from ebay website. when I tried with it, It doesnt show me downlaod mode screen. But it make my mobile able to connect to system. And I can see the port as added in odin. using that only I have installed android froyo of GT I9000 model in captivate mobile. I tried with all the PDA files available in forums here, but it didnt work.
Presesnt situation is, I am using captivate mobile which have android version of GT 9000 model. As I mentioned in the post.
Click to expand...
Click to collapse
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
m1batt1 said:
I'm curious do you ever see anything on your screen?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
vishu_10d said:
Yes. As i Said. I am running Android version of GT 9000 on my Samsung Captivate model and it is working fine(except some cases e.g. screen orientation while running games and some other apps, Media sound doesnt come etc).
Click to expand...
Click to collapse
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
BWolf56 said:
I think it meant something along the lines of ''What is showing on your screen while in download mode''?
Click to expand...
Click to collapse
Hi,
when i usb jig and after that connect to system. I can see port Added in Odin software. which ideally happens when mobile is in downlaod mode.
but here for me display doesnt show anything on screen, screen remain blank. No android icon comes. but still I can see port added in odin and also can install files in the mobile. like pit, bootloader PDA files. etc.
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
vishu_10d said:
I have tried my image files which is available with bootloaders in forum. But when I start. I always get following error.
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> Sbl.bin
<ID:0/016>
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)..
It always fails while executing sbl.bin files. I have gone through some forum where reports similar issue of sbl.bin.
Resolution which was given is to try with " 4 part flash files" which is Boot, PDA, Modem, CSC files.
http://www.droidevelopers.com/f299/14467-sbl-bin-error.html.
But this solution is not for captivate mobile.
It would be good if someone can provide me these files instead of a single installable file.
Click to expand...
Click to collapse
I believe 4-2ndtwin has the link to them in his sig.
BWolf56 said:
I believe 4-2ndtwin has the link to them in his sig.
Click to expand...
Click to collapse
So any suggestions ? what should I do now ?
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
Search for 4-2ndtwin.. Go into his profile, then sig link and find the separated files.
vishu_10d said:
So any suggestions ? what should I do now ?
Click to expand...
Click to collapse
You need Jtag
Check my signature for more detail.
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Here is the i897uckf1 gingerbread 2.3.3 files...http://forum.xda-developers.com/showthread.php?p=30840818...Post #284 in that thread.
Do not put any files in the Bootloader tab of Odin. Just PDA in pda tab, CSC in csc tab, PHONE in phone tab and also Pit file in the pit tab. Be sure to have a reliable usb/micro usb and constant power source. This firmware does contain the Bootloaders.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks a lot for providing me these files. This is what I wanted. I will try as you suggested and will let you know the result.
Thanks

Categories

Resources