[Q] Time/Date - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

please help me with this problem​
Every time i power on my phone it says "set up your time" in status bar
And I find the time not correct
Although it was adjusted automatically in the past
I tried changing rom but it doesn't help
What ca I do?​

mhmod222 said:
please help me with this problem​
Every time i power on my phone it says "set up your time" in status bar
And I find the time not correct
Although it was adjusted automatically in the past
I tried changing rom but it doesn't help
What ca I do?​
Click to expand...
Click to collapse
Check the time zone for your country here, perhaps you have not made arrangements for it! Then untick the "automatic time zone"

Related

Missing "0" in 24hr time format on home screen- is there a fix?

when I have the 24hr time format selected... from 1AM to 9am it does not shows 2 digits in the HRs.there is a missing 0 . IE: this is what it shows - 9:24, instead of 09:24.. is there a fix?
thanks
Fridayy
I have been tryingto fix this too and nobody seems to know how
it's weird
This setting took me forever to find, especially because it's in a very weird place.
Go into your settings, and then switch to the "System" tab.
Open the "Regional Settings"
At the bottom you should now see 5 tabs, go to the "Time" tab
Where it says "Time style:" click the drop down and select "hh:mm:ss tt"
You can also switch it into a 24 hour clock instead if you do the "HH:mm:ss"
Feel free to ask any questions!
wizardlizard111 said:
This setting took me forever to find, especially because it's in a very weird place.
Go into your settings, and then switch to the "System" tab.
Open the "Regional Settings"
At the bottom you should now see 5 tabs, go to the "Time" tab
Where it says "Time style:" click the drop down and select "hh:mm:ss tt"
You can also switch it into a 24 hour clock instead if you do the "HH:mm:ss"
Feel free to ask any questions!
Click to expand...
Click to collapse
Mine didn't have the "hh:mm:ss tt"option
So I chose "hh:mm:ss". At the home screen, it would show 4:03pm in the big clock. The small clock would should 04:03pm though.
wizardlizard111 said:
This setting took me forever to find, especially because it's in a very weird place.
Go into your settings, and then switch to the "System" tab.
Open the "Regional Settings"
At the bottom you should now see 5 tabs, go to the "Time" tab
Where it says "Time style:" click the drop down and select "hh:mm:ss tt"
You can also switch it into a 24 hour clock instead if you do the "HH:mm:ss"
Feel free to ask any questions!
Click to expand...
Click to collapse
thanfo for the suggestion.... tried it.. but still the same.. it shows 7:00 instead of 07:00...
hi,
had the same problem.
any guru out there who can provide a cab file to fix this problelm?
thanks!

Missing the AM/PM symbols in 12hr format

Not sure as to why, but I'm missing the am/pm symbols for the alarm in TF3D and also the clock and Alarms and Tasks. All I see is 6:30 when I should see 6:30AM
Can anyone assist?
I have a HTC Touch Diamond
The Regional settings are set for English (Australia) and the Time tab shows the symbols set.
Hi frigit try this.
Start-->Settings-->System(Tab)-->Regional settings-->Time(Tab)
Change the Time style to hh:mm:ss:tt (Select it from the drop down menu).
I hope this solves ur problem. Bye TC
suchit_g said:
Hi frigit try this.
Start-->Settings-->System(Tab)-->Regional settings-->Time(Tab)
Change the Time style to hh:mm:ss:tt (Select it from the drop down menu).
I hope this solves ur problem. Bye TC
Click to expand...
Click to collapse
Unfortunately I didn't have the :tt in my selection.
I have hard reset the device since and all is good again.
Thanks anyway. Paul

[Q] is there a way to increase LED flashing time ?

Hi folks,
as mentioned above, i searched in settings and all suboptions but could not find any point where the notification LED flashing time is increasable. Often I do not see the notification because the time is to short. I search for a option to increase the flashtime from default (~ 5-7 mins) to an action (i.e. screen on / push button). Or is there a application which provide this ?
regards,
LP
luckypeanut said:
Hi folks,
as mentioned above, i searched in settings and all suboptions but could not find any point where the notification LED flashing time is increasable. Often I do not see the notification because the time is to short. I search for a option to increase the flashtime from default (~ 5-7 mins) to an action (i.e. screen on / push button). Or is there a application which provide this ?
regards,
LP
Click to expand...
Click to collapse
try these
https://play.google.com/store/apps/details?id=com.koo.lightmanager&feature=search_result
https://play.google.com/store/apps/details?id=com.manzy.flashnotification&feature=search_result
many thanks for help !

[CM11] NovaFusion Clock Problem

Hi, I've last NovaFusion built (20140521) and I've a problem with the clock. Aparently It freezes during the night. If I go to Date & Time settings in the "Set time" I can find the correct time. I enter and press "Done" the clock updates in the taskbar. Can anyone help me?
Thanks
Patricio
PatoBass said:
Hi, I've last NovaFusion built (20140521) and I've a problem with the clock. Aparently It freezes during the night. If I go to Date & Time settings in the "Set time" I can find the correct time. I enter and press "Done" the clock updates in the taskbar. Can anyone help me?
Thanks
Patricio
Click to expand...
Click to collapse
Read my FAQ. It has some workarrounds for the clock (alarm) freeze
mauam said:
Read my FAQ. It has some workarrounds for the clock (alarm) freeze
Click to expand...
Click to collapse
Thanks! I'm trying first disabling Profiles. If that doesn't work I'll test your sugestions
Best try disabling auto-update time (network time sync), as this update sometimes does fail in deep-sleep. Which in turn causes the clock to freeze.

[Q] Weekday on HTC One Lock Screen

Hello,
Could someone please advise how I can change the setting to display Weekday on my HTC One Screen. As you can see from the attached Screenshot, I can only see Time, Date, Place.
Many Thanks...
Harish
Don't have the device with me now so I can't tell you the exact steps, but try going to Options, Date and Time (or something like that), there's an option there to change the date format to day/date/month

Categories

Resources