[Q] CyanogenMod and TWRP... - One (M7) Q&A, Help & Troubleshooting

Hi everyone
Have a question to you.
Can I install CyanogenMod via TWRP Recovery? I read somewhere that it's not possible and somewhere that it's possible...
Can you give me unequivocal answer ?

Pener97 said:
Hi everyone
Have a question to you.
Can I install CyanogenMod via TWRP Recovery? I read somewhere that it's not possible and somewhere that it's possible...
Can you give me unequivocal answer ?
Click to expand...
Click to collapse
a lot of CM mods come with their own installers
if you have the cm.zip I don't know why you could not flash it like any other rom from TWRP. Where ever you downloaded it, it should have install instructions

Ok, so I understand that is's possible

Pener97 said:
Ok, so I understand that is's possible
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2579229
The Device must be unlocked and equipped with a Recovery,
you need a ROM.zip and optional GAPPS,the Download Links will you find here.
At first,make a Nandroid-Backup of your existing system!
When you first time flash the ROM or you changed from another ROM-Base,
do a Full Wipe via Recovery,flash the ROM, and then the GAPPS.
Restart to System,configure and enjoy CM11.
RECOVERY:
For Nightly till 20140430
The recent recovery is needed to flash the ROM
TWRP 2.6.3.3 or CWM 6.0.4.6
The easiest way you can flash the recovery hereby
Very Important Information !
A Recovery update with beginning the Nightly-ROM 20140501 will be required !
Guidance & Instructions & Recovery download can be found here
Click to expand...
Click to collapse

Related

Cwm recovery on GT -I9070

Can someone teach me how to install cwm recovery on my SGSA GT-I9070?
isdian said:
Can someone teach me how to install cwm recovery on my SGSA GT-I9070?
Click to expand...
Click to collapse
go here and follow the guide concerning CWM recovery and book mark it for future reference and post there when you have problems.
Check this out! Links to useful Guides and " Banned " Documentaries ​
isdian said:
Can someone teach me how to install cwm recovery on my SGSA GT-I9070?
Click to expand...
Click to collapse
download temporary cwm and copy it to sd card turn off phone and go to recovery mode by holding volume up +power button and use volume buttons to go up and down there and power button to select and select update zip from sd card and select the zip file you copied in sd card
if you want permanent cwm you must install cocore kernel
What xsenman said lol don't forget to bookmark it lol it's a very helpful thread.
Cwm fort install custom rom
When I want intall custom rom is temporary cwm enough or I need permanent cwm?
Thank you for help
fleury93 said:
When I want intall custom rom is temporary cwm enough or I need permanent cwm?
Thank you for help
Click to expand...
Click to collapse
You do not need permanent. And CM ROMs are stock recovery flashable, so you do not need it. You can install CM10.1, CM10.2, CM11 that way (and probably some other CM based ROMs) :victory:
Update CWM v.6.0.4.7 to v.6.0.4.8
I had thought to make a new thread related to the new version of CWM update. Well, because there are made threads, so I want to express my question. Where can I update CWM v.6.0.4.7 to v.6.0.4.8 specifically for the S Advance? Thanks..
TPD-21 said:
I had thought to make a new thread related to the new version of CWM update. Well, because there are made threads, so I want to express my question. Where can I update CWM v.6.0.4.7 to v.6.0.4.8 specifically for the S Advance? Thanks..
Click to expand...
Click to collapse
You must compile kernel with new CMW to get it I think. We have recovery in the same partition where kernel is.
shut_down said:
You must compile kernel with new CMW to get it I think. We have recovery in the same partition where kernel is.
Click to expand...
Click to collapse
Awesome!!!! "shoots beloved side dish arrived". Which I hope to come with their own! CWM v.4.0.6.8 already embedded in my device..
Thanks TC... :good:
very informative
The information was very useful for I am a brand new s advance user.
How to download this file

[Q] Doubts about Recovery

Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
samnettt said:
Hi Guys,
I'm a I8190 user just rooted with vroot and now i need to install custom recovery either CWM or TWRP.
I have some doubts to be cleared before choosing the one among them.
1. Which one is working perfectly/preferred for SIII Mini ?
2.How can i easily install this to my device (without PC is preferred )
3. How can i shift from CWM to TWRP or viseversa after i installed one among them.
Thanks Guys.
Click to expand...
Click to collapse
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
installing custome rom
Gw|n said:
1. Both work well, personally I prefer TWRP.
2. If you have stock recovery, you need to use PC for flash custom recovery via Odin or jOdin.
3. From custom recovery you can easily flash zip file with another recovery.
Click to expand...
Click to collapse
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
samnettt said:
thanks brother. I have already done it via Odin.
My cureent FW is 4.1.2 . Can i flash CM 11.0 directly ?
Thanks
Click to expand...
Click to collapse
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Gw|n said:
Yes, but don't forget to make NANDROID backup before flashing and after flashing do full wipe.
Click to expand...
Click to collapse
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Aronuser said:
stick to this when flashing anything:
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
also when you flash cm 11 stick to whats written on the developers page novafusion this also means to use twrp recovery for it (currently)
and if the latest nightly doesn't work for you, then try the latest stable that is 23th 3th right now
Click to expand...
Click to collapse
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
samnettt said:
i did a backup via CWM in reboot in recovery mod,which is arouund 1.3 GB
but, what' s NANDROID backup.
Thank you.
Click to expand...
Click to collapse
That's NANDROID backup
samnettt said:
thanks buddie for that link.
Yeah i read the developers site and read reviews before flashing the ROM.
But as you said if the last stable version is 20140323, the download link is not available as the developer is continuesly updating the ROM.
Can i get the download link from anywhere else ?
Thank you
Click to expand...
Click to collapse
Here I uploaded it for you
https://www.dropbox.com/s/9082qxym9ysukxc/cm11.0_golden.maclaw.20140323.zip

[Q] CM11 + CWM on GT-N7000

Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings
I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot
I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps
eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING
tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!
eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then
hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING

Format and Fresh Install GTi9070

Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.

Can't install TWRP on my Galaxy S2 I9100. Tried Everything

Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Aly Rezz said:
Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Click to expand...
Click to collapse
Hello,
I will move your thread to the correct section, where experts might be able to assist you.
Regards
Vatsal,
Forum Moderator.
Aly Rezz said:
Hi guys, my name is Ali Reza. I have a Samsung Galaxy SII I9100. When I first got this phone, I rooted it and wanted to flash a custom recovery to flash ROMs, but I couldn't. I tried everything.
1) Flashable Zip File
2) Odin
3) Flashify and other apps
4) Heimdall Suite
But nothing worked for me
I managed to install CWM Touch Recovery using the kernel for Android 5.1.1 but I can only flash ROMs whose android version is 5.1.1. I want to flash Android 7.1 that is the Lineage OS on my device. For that I require TWRP recovery. I searched for this on all websites. Some say that before flashing TWRP recovery I require TWRP kernel. I searched for the kernel but couldn't find it. Some say that before flashing the latest version, we need to flash the old version, and using that recovery we have to update TWRP to the latest version. I tried that but I failed. Plz help me install TWRP on my device or plz provide me the kernel for android 7.1.1. Thank You
Click to expand...
Click to collapse
Have you tried unchecking the "reboot" option in odin when flashing twrp and then manually power off and boot directly to recovery with 3 buttons combo? Make sure you boot first to twrp rather than android. Tell if it worked
Thanks for ur help guys... but I discovered a method to install TWRP. I flashed the diya kernel recovery in download mode instead of philz... And then I followed all the steps... thanks
Aly Rezz said:
Thanks for ur help guys... but I discovered a method to install TWRP. I flashed the diya kernel recovery in download mode instead of philz... And then I followed all the steps... thanks️
Click to expand...
Click to collapse
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Hi, can you tell me where I can find this diya kernel (googled it... in vain) since I'm also struggling to update my i9100 from 4.1.2 to Lineage 7.1 ? Much appreciated
Jacbjacb said:
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Click to expand...
Click to collapse
adiver said:
Hi, can you tell me where I can find this diya kernel (googled it... in vain) since I'm also struggling to update my i9100 from 4.1.2 to Lineage 7.1 ? Much appreciated
Click to expand...
Click to collapse
He probably means "Siyah Kernel", but anyway, have you guys tried this guide?
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Or try this short one i made, with all links needed except for Odin of course
https://forum.xda-developers.com/showpost.php?p=71195098&postcount=5
Guys, those guides are for galaxy s2 i9100 not i9000.
Thank you for your reply. I managed to sort it out thanks to https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601/
Thank you for your reply. I managed to sort it out thanks to https://forum.xda-developers.com/galaxy-s2/help/user-help-to-start-feeling-somewhat-t3561726
Jacbjacb said:
Hi Aly
I am having exactly the same problem you outlined above ...... What was the answer you worked out? What is a "Diya kernel .... instead of philz" .... Help, still confused?
Click to expand...
Click to collapse
I'm sorry buddy. I meant Siyah kernel ?. I flashed TWRP with that recovery

Categories

Resources