Related
Hi, I just rooted my phone and installed Darky's ROM etc. Everything went perfectly but I just did a factory reset on my phone through the settings > privacy menu. Then i turned my phone off, now it's stuck on the boot screen (the one that says:
Galaxy S
GT-I9000
Samsung
)
Anyone know what I can do to resolve this?
PS, I've tried booting into recovery and download mode,- only download mode works
Flash ressurrection with Odin, or just try reflash a kernel.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Flash another ROM in Odin with re-partition. You need CSC, Modem, and ROM. The next time, factory reset/wipe, clear cache, and clear Dalvik cache before flashing to a custom ROM, not after.
Also, this is the wrong section for this.
If download mode still works, its unlikely that its ' dead'.
Probably just a corrupted filesystem or some missing file that it needs.
If youve tried everything else, the thing left to do is flash a complete firmware via either Odin or Heimdall, in download mode. That should give you a working phone again.
First, wrong section... post in the right section next tome.
Get darky resurection edition and flash with odin, then reflash darky nornal rom from cwm
Sent from my GT-I9000
WiwiPouPou said:
Flash ressurrection with Odin.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
follow this guide for flashing stock rom --> http://darky.ficeto.com/community/i...-stock-rom-over-darkys-rom-gt-i9000-only.486/
AND: if you can access DL mode then Recov Mode is working too. You are just doing something wrong then ... for Recov Mode you need to release all buttons when Galaxy S logo appears.
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
For questions maybe the questions and answers section
Anyway, with download mode our phone is pretty much unbrick/killable unless you flash another bootloader which is a) rare and b) not really a threat either
I think my phone is dead.... can anyone help me verify that? I've been reading all over and tried all ways to get a response, but there's none.
I pulled the battery and let it sit for several hours before inserting. - No response.
Put in my spare batte, have it plugged to charger. Also no response.
Plug to PC, PC doesn't even see the phone.
Cannot go into recover, download or boot or show any signs of life.
It was charging fine one moment (last saw about 80%) then about 10 min later, went to unplug to use.... but found the phone dead and rather warm. (not sure if that is usual since the batt was being charged)
Anyway, I flashed my phone only 1 week ago using "Insane" kernel and doing Overclock to 1200 with about -75 undervolt across the frequencies. Did I kill the phone by doing this ???
What are my chancs of getting warranty on it if the service centre manages to find out it had been flashed??
What are my options now? Any other areas to chek and try to recover?
Thanks
Well, if you can't get into download mode, there is still one more step to try before giving up. Go to ebay and search for I9000 usb jig. That might be able to force your phone into download mode. (They are cheap. Very cheap.)
If that doesn't work, there's nothing else you can do but to bring it back to a service centre.
Check out the info for the rig you mentioned. Apparently, it doesn't wotk for phones that are totally dead. i.e. no signs of life at when buttons are pressed, no lights etc.
I brought the set down the to service centre and luckily, the lady there did not ask me anything much. She just swapped out the batt to verify, plugged into USB charger to verify... then started to fill in the form for the phone to be sent in for repairs. Though she's not the repair person.... she did mentioned that all data would be lost and most likely a new board would be put in.
I'm keeping my fingers crossed that'll be the case... just gimme a new PCBA w/o trying to repair the current one. Hope they don't have any diagnostic tool/fixture where they can boot from a "debug" chip (such as processor, etc) to do board level repair.... then it might just show up that I'm running a modified kernel & ROM.
They cant check, if you were runnig custom ROM. Stop worrying, mostly they do not have a choice but to replace PCB. This is my personal exp. with samsung.
Sent from my GT-I5700 using Tapatalk
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.
vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.
mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.
firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Try a different USB cable?
Sent from my SPH-D710 using XDA
izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it
OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:
AriSLaSH said:
OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:
Click to expand...
Click to collapse
Can you get into Download/Recovery Mode? and what is it doing? Just black or showing the bootanimation? And btw you should have posted that in the q&a thread!
Try connect phone to charger and we will see.
thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:
You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able
broodplank1337 said:
You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able
Click to expand...
Click to collapse
The buttons is glowing when you touch it, while ex. you charge phone?
AriSLaSH said:
thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:
Click to expand...
Click to collapse
So, does download mode work or not?
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
If you cant boot phone anyway, that's Hard Brick...
AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
Ans the qn man..there is no point of crying..can u goto diwnliad mode or not..provide useful info so ppl can help u...
Sent from my GT-I9001 using xda app-developers app
BTW - Do you even know, how to enter in download mode?... I know, that's stupid question but I must ask..
yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!
AriSLaSH said:
yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!
Click to expand...
Click to collapse
Relax man we are just trying to help
Sent from my GT-I9001 using xda app-developers app
i know that isn't the best thing i've ever said but you're sure that the battery isn't dead ?? it may happens but anyway it's weird ... you could meassure/verify it somehow
AW: [Q]How to unbrick?
Take battery out, wait 30 minutes Start Odin in your pc plug in the USB cable To the phone, press and hold the button Combo for download mode and take in the battery
sometimes this works, our phone is very hard To brick
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
follow My instructions ( post direct above yours) this Method helps many people ! AND STOP WRITING WITH CAPS, ITS LIKE SCREAMING AND NO ONE LIKE IT !
AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Which value of voltage does the multimeter show
Sent from my GT-I9001 using xda app-developers app
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Send my a link to your 'cooked' ROM, let me look at what you flashed... also, stay chill, we are trying to help you here.
Sent from my GT-I9001 using xda app-developers app
AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
The first advice I can give to you is to take the battery out for overnight then put it back in.
My phone is vibrate continuously , i tried to remove the battery , the SIM card , microsd and i reflash a stock rom and still vibrate. First time the phone didn't vibrate in Download Mode but now is restarting and vibrating. I had a stock rom with removed bloatware and no overclock , some apps , no tweaks :| , Could some say what should i do ?
RedLynx90 said:
My phone is vibrate continuously , i tried to remove the battery , the SIM card , microsd and i reflash a stock rom and still vibrate. First time the phone didn't vibrate in Download Mode but now is restarting and vibrating. I had a stock rom with removed bloatware and no overclock , some apps , no tweaks :| , Could some say what should i do ?
Click to expand...
Click to collapse
first thing if it is booting normal and running just continues vibrate take care maybe it is hardware so install triangle away rest the counter go cwm recovery wipe everything then download mode flash stock rom that should solve the problem or remove battery and sim and sd for the next day then try if not do those steps and go to the Samsung warranty center
Sent from my GT-S6500D using Tapatalk 2
Thanks man , i finally try to install the rom for my country and i made a reset with Triangle Away.
It's BACK , for a few minutes worked now again.
This is the development thread, not support thread
Sent from my GT-S6500D using Tapatalk 2
aamj1997 said:
This is the development thread, not support thread
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
and what is distributing you ha :screwy: so why is this forum ha again:banghead:?
Sent from my GT-S6500D using Tapatalk 2
Sorry for posting here, maybe could someone move it to Q&A , just now i find the subforum.
There is no one who could help me ? I tried a lot of methods but no one succeded.
NiceIceDice96 said:
and what is distributing you ha :screwy: so why is this forum ha again:banghead:?
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
damn '96 explains so much for me
this is a DEV sub forum , not a Q&A sub forum , can't you guys read?
I just found the Q&A a few days ago..
I solved partially the problem with the vibration.
RedLynx90 said:
Sorry for posting here, maybe could someone move it to Q&A , just now i find the subforum.
There is no one who could help me ? I tried a lot of methods but no one succeded.
Click to expand...
Click to collapse
Did you ever make a nandroid backup (before this problem was happening)? You could try restoring to that. Otherwise, I hate to say it, but it might just be a hardware problem... I haven't done much with my mini 2 yet when it comes to flashing etc., but judging from my experience, there shouldn't ever be a reason for it to vibrate when it's in recovery mode. I might be wrong, but I don't think the drivers for the vibration motor are even loaded in recovery - so something very odd would have to happen software-wise - assuming that the drivers are not being loaded in recovery - for that to happen. If you still have a warranty on your device, I would restore everything to stock, reset the binary counter (with triangleaway or whatever it's called - I'm not exactly sure how it works, all I know is that it does work), and return it for warranty service. If the warranty is expired, then you could try to take the phone apart (don't blame me if something goes wrong, though) and see if there's anything obvious that might be causing problems. Other than that, I don't really know what else to say...
I restored the best backup i had , now it seems ok , if i don't push the power button and i close the screen with a application there are no problems , i removed the cover i take out the vibration and still doesn't work , now works fine if i don't touch the power button , a few days ago i couldn't enter into cwm or download mode , when i entered the phone was restarted and i couldn't do anything , now i have stock rom , removed bloatware , no oc and works fine and i have a application to turn off the screen