Database Develop

[Q] problem with update froyo original vodafone EPF30

I have a prejudice google nexus original one I tried vodafone EPF30
since the OTA update did not come to the nexus is one of Frøya
by check in the code or through manual update, but there was
nothing to do the upgrade in both cases is not aborted
I understand why.
through check-in download the update occurs smoothly,
but when it goes to install the toolbar update stops in the middle '
appears and the android with the triangle and exclamation point and then nothing
more.
however, if you carry some manual dell'update the error
shows:
E: cant't open / cache / recovery / command
verifyng current system
Assert failed: apply_patch_check ......
E: Error in / SDCard / update.zip (status 7)
Installation aborted
PLEASE HELP ME I DO NOT KNOW HOW TO DO!

fluck74 said:
I have a prejudice google nexus original one I tried vodafone EPF30
since the OTA update did not come to the nexus is one of Frøya
by check in the code or through manual update, but there was
nothing to do the upgrade in both cases is not aborted
I understand why.
through check-in download the update occurs smoothly,
but when it goes to install the toolbar update stops in the middle '
appears and the android with the triangle and exclamation point and then nothing
more.
however, if you carry some manual dell'update the error
shows:
E: cant't open / cache / recovery / command
verifyng current system
Assert failed: apply_patch_check ......
E: Error in / SDCard / update.zip (status 7)
Installation aborted
PLEASE HELP ME I DO NOT KNOW HOW TO DO!
Click to expand...
Click to collapse
anyone can help me????
thanks
Fluck74

Error 7 when flashing ICS leak?

I'm posting here because I don't have 10 posts to post in the thread...
I'm following the directions here:
http://forum.xda-developers.com/showthread.php?t=1701313
I did the .615 fastboot files, they worked fine, but when I try to flash the ICS leak I get this:
assert failed: file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/maserati_vzw/cdma_maserati:2.3.6/6.5.1_167_DR4-1_M1-219/4:user/release-keys" || file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/maserati_vzw/cdma_maserati:4.0.4/6.7.2-180_DR4-16_M2-33/41:user/release-keys"
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Please help... Thanks.
edit-
I re-wiped data and cache to see if that helped.
Now I get this error.
assert failed: mount("ext3". "MTD". "system". "/system")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.

Bump. Please help.

Does your system currently boot?
Edit: And I'm not sure what .615 is, but you want to be running 219 before flashing the leak.

podspi said:
Does your system currently boot?
Edit: And I'm not sure what .615 is, but you want to be running 219 before flashing the leak.
Click to expand...
Click to collapse
I have absolutely no idea why I said .615
I'm on .219, and yes it currently boots.

Try Factory wipe, Fast boot to 219, Root, Install OTA Root Keeper, Update the SU binary, Protect then temp unroot and restore, then try the latest ICS Leak. That's what I did. If you have safe strap, you can advance restore your data, or at least that's what I did and it worked perfectly.
Sent from my DROID4 using Tapatalk 2

gdeeble said:
Try Factory wipe, Fast boot to 219, Root, Install OTA Root Keeper, Update the SU binary, Protect then temp unroot and restore, then try the latest ICS Leak. That's what I did. If you have safe strap, you can advance restore your data, or at least that's what I did and it worked perfectly.
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
That's how I've been trying to do it. :/
edit-
One of the guys from an IRC channel I stay in seems to think root is affecting it. I don't think so, but I'm gonna try doing it without root this time...
edit-
That didn't work either.

After looking more closely at the error code I posted, I've realized I simply cannot read posts correctly.
I flashed to 215, not 219...

I have the same issue

there is no 615?

ive had the same issue before. 3 things i can offer to try:
1. verify you are using the correct kernel with the correct ics update
2. verify the zip file is NOT DOUBLE ZIPPED, if it is, you need to extract it and recopy to your sd card.
3. backup your sd card and delete everything off it. Then copy only the ics update zip to the sd card and try again

Another thing to note is that 4.0.4 is actually quite easy to root. I simply flashed back to 215 and updated to 219 (all without even signing in to Google), and then updated straight to the 213 leak. It was like getting a new phone with 4.0.4. Prompted me to log in to my Google account, activate, and so on, and worked flawlessly. Then, I rooted, installed FoxFi, and went on happily with my life.

This was posted in the evo3d section thought it might help.
ruthless kanged from
===FOR EVERYONE WHO GETS STATUS 7 or 6 like: === (Thanks crystalic)
Quote:
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__102" ,
"HTC__E11" , "HTC__203" , "HTC__032" , "HTC__304" , "HTC__A07" ,
"HTC__405" , "HTC__Y13" , "HTC__N34" ,
"HTC__016") == "t");
1. download 7zip (google it, free) and open up "S_OFF_4EXT_RECOVERY_OTA_SHOOTER_U_ICS_35_S_HT C_Eu rope_3.28.401.1-1.20.401.8_release_2627623qpt0ma8rnwgn0qq.zip" with 7zip, and go to
META-INF/com/google/android/
and extract "updater-script" to your desktop. Be sure it's not extracted as .TXT and DO NOT OPEN IT WITH NOTEPAD
2. Download Notepad++ (google it, it's free) and open up the "updater-script" from the desktop.
Comment out the lines, by putting # in front of them:
Quote:
#assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
# "22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
# "77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__102" ,
# "HTC__E11" , "HTC__203" , "HTC__032" , "HTC__304" , "HTC__A07" ,
# "HTC__405" , "HTC__Y13" , "HTC__N34" ,
# "HTC__016") == "t");
3. then go to File=>Saves As=>Name: updater-scipt Type: All types (*.*)
Now go back to your "META-INF/com/google/android/" in the 7zip and delete the existing "updater-script", and the put inside the new one from the desktop
4. push the zip to your SD card now and install it from 4ext recovery (and don't forget to install firmware as described in the first post)
***NOTE: be sure to use 7zip and Notepad++ because they don't seem to corrupt the files by manipulating with them as classical Notepad does***

[HELP] HTC One M7 - Decrypt System Storage - S-On - Locked - Two CIDs - Driver Probs

Hi,
I got a HTC One M7 from a friend who says he got it with the information that a factory reset went wrong. Since my own phone is over ten years old I thought why not give it a try.
First I installed 15 seconds ADB with drivers.
The One M7 boots to Enter Passwort to decrypt system storage. There I can activate developer mode and therefore USB debugging und developer Options. If I connect it to my Computer it failes to install MTP-USB drivers and does not recognice the phone properly just as an Android Phone and does not install any drivers.
In Bootloader under Fastboot my Computer recognizes the phone as Android 1.0 and also installs no drivers. So my first question would be is there a way to install the correct drivers manually?
Since I can not connect the phone and use fastbot here are some Informations I pulled from the Bootloader and Recovery (Logs):
Bootloader:
M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4T.35.3218.16
OpenDSP-v35.120.274.0718
OS-7.19.401.51
eMMC-boot 2048MB
Nov 16 2015,20:23:35.0
Recovery Log:
ro.aa.maincid=HTC__001
ro.adb.secure=1
ro.cid=HTC__102
Recovery:
E: missing bitmap oem_unlock_bg
(Code -1)
E: missing bitmap oem_unlock_bg_yes
(Code -1)
E: missing bitmap oem_unlock_bg_no
(Code -1)
E: missing bitmap icon_ruu
(Code -1)
E: failed to mount /data (Invalid argument).. try emmc mount
handle_cota_install: Can't mount /data
There are two different CIDs the main one ist the WWE and the second one is the German One. As far as I know ther should only be one but correct me if I am mistaken. And also the Data Partition seems to be corrupted. Is there any way to get this phone going again?
Thanks.

Sokra X said:
Hi,
I got a HTC One M7 from a friend who says he got it with the information that a factory reset went wrong. Since my own phone is over ten years old I thought why not give it a try.
First I installed 15 seconds ADB with drivers.
The One M7 boots to Enter Passwort to decrypt system storage. There I can activate developer mode and therefore USB debugging und developer Options. If I connect it to my Computer it failes to install MTP-USB drivers and does not recognice the phone properly just as an Android Phone and does not install any drivers.
In Bootloader under Fastboot my Computer recognizes the phone as Android 1.0 and also installs no drivers. So my first question would be is there a way to install the correct drivers manually?
Since I can not connect the phone and use fastbot here are some Informations I pulled from the Bootloader and Recovery (Logs):
Bootloader:
HBOOT-1.61.0000
RADIO-4T.35.3218.16
OpenDSP-v35.120.274.0718
OS-7.19.401.51
eMMC-boot 2048MB
Nov 16 2015,20:23:35.0
Recovery Log:
ro.aa.maincid=HTC__001
ro.adb.secure=1
ro.cid=HTC__102
Recovery:
E: missing bitmap oem_unlock_bg
(Code -1)
E: missing bitmap oem_unlock_bg_yes
(Code -1)
E: missing bitmap oem_unlock_bg_no
(Code -1)
E: missing bitmap icon_ruu
(Code -1)
E: failed to mount /data (Invalid argument).. try emmc mount
handle_cota_install: Can't mount /data
There are two different CIDs the main one ist the WWE and the second one is the German One. As far as I know ther should only be one but correct me if I am mistaken. And also the Data Partition seems to be corrupted. Is there any way to get this phone going again?
Thanks.
Click to expand...
Click to collapse
The only way to remove decryption is with a factory reset (must be done with the stock recovery not with a custom recovery).
You can download the correct drivers here http://htcusbdriver.com/download/htc-usb-driver-v4-17-0-001

Thanks for the drivers link I´ll try them out. As for the factory reset as far as I know this is what caused the problem in the first place so are you sure another factory reset will rectify that? Most threads I´ve read so far suggest reflashing RUU through fastboot. But when it comes to mobile phones I am a complete noob so I am not sure and thats why I started this thread.

Sokra X said:
Thanks for the drivers link I´ll try them out. As for the factory reset as far as I know this is what caused the problem in the first place so are you sure another factory reset will rectify that? Most threads I´ve read so far suggest reflashing RUU through fastboot. But when it comes to mobile phones I am a complete noob so I am not sure and thats why I started this thread.
Click to expand...
Click to collapse
Trying another factory reset won't hurt. And yes if that changes nothings, you should try a RUU. Look in my signature for the link to the ruu collection thread. You need to use the 7.19.401.51 version.

alray said:
Trying another factory reset won't hurt. And yes if that changes nothings, you should try a RUU. Look in my signature for the link to the ruu collection thread. You need to use the 7.19.401.51 version.
Click to expand...
Click to collapse
Thank you the drivers worked like a charm now I finaly have access. If a factory reset doesnt work could you point me to the direction with the right tutorial for Locked, HBOOT 1.61 and S-On?

Sokra X said:
could you point me to the direction with the right tutorial for Locked, HBOOT 1.61 and S-On?
Click to expand...
Click to collapse
The link is in my signature "HTC One M7 RUU Collection thread". At post #1 you'll find instructions how to flash the RUU. The RUU you need is at post #2

alray said:
The link is in my signature "HTC One M7 RUU Collection thread". At post #1 you'll find instructions how to flash the RUU. The RUU you need is at post #2
Click to expand...
Click to collapse
Thanks I overlooked the spoiler in the first post shame on me
Just tried wipe data/factory reset under Recovery it shows the following error:
-- Wiping data...
Backup necessary files in data partition
E:failed to mount /data (Invalid argument).. try emmc mount
Formatting /cache...
Data wipe complete
I gues I try flashing RUU now.

I just flashed RUU. After a few Minutes it aborted with Failed! Too many Links and i thought Nooooo. After a little light reading and a lot of swetting I tried another USB Port and a cable with a ferrit core and this time it worked. One M7 did boot I can get into the OS it shows all 32GB of space in OS but when I boot into recover mode. It says failed to mount sd card. Does anyone know why? Did they forget to update the recovery mode in this RUU? Or did the previous owner maybe manipulate the partion (sizes)?

Sokra X said:
when I boot into recover mode. It says failed to mount sd card. Does anyone know why? Did they forget to update the recovery mode in this RUU? Or did the previous owner maybe manipulate the partion (sizes)?
Click to expand...
Click to collapse
If you're talking about the yellow errors codes at the bottom of the screen when booting in the stock recovery:
Code:
Mount SDCARD failed 1(2/3/4/5) times
Can not mount SD Card.(No such device)
it's 100% normal and not a concern. Stock recovery is trying to mount a drive that doesn't exist on this phone model (the M7 isn't equipped with an sd card).

alray said:
If you're talking about the yellow errors codes at the bottom of the screen when booting in the stock recovery:
Code:
Mount SDCARD failed 1(2/3/4/5) times
Can not mount SD Card.(No such device)
it's 100% normal and not a concern. Stock recovery is trying to mount a drive that doesn't exist on this phone model (the M7 isn't equipped with an sd card).
Click to expand...
Click to collapse
Thank you very very much for all your help.

Sokra X said:
Thank you very very much for all your help.
Click to expand...
Click to collapse
you're welcome

I have htc one m7.
The issue is the whole software is corrupted. When ever i enter fastboot oem rebootRUU command. Phone turns off instead of restarting into bootloader.
Any help would be appreciated.

abbas0347 said:
I have htc one m7.
The issue is the whole software is corrupted. When ever i enter fastboot oem rebootRUU command. Phone turns off instead of restarting into bootloader.
Any help would be appreciated.
Click to expand...
Click to collapse
There is not much you can do if "fastboot oem rebootRUU" is shutting down your phone instead of rebooting it in ruu mode. Bootloader may be corrupted, might be caused by a bad emmc.

My HTC one (m7) won't update ,says 'installation aborted'

So i got an unlocked/sprint(I think!) version of HTC one m7 just recently and after checking everything out I figured it had some really retro and boring app display interface then I tried checking about phone only to discover It was using the old android 4.4.2 KitKat version so i tried checking for software updates and yes I found one that sized up to 325.18MB and I downloaded it after which i tried installing ,everything was going fine until it got to about ¼ way through the process loader in recovery where it jumped straight to another page that read.
Reboot system now
Apply from SD card
Wipe data/factory reset
Wipe cache partition
Reboot to boot loader
Power down
View recovery logs
Apply from phone storage (all which were to be navigated through and where in blue while beneath and in yellow .......)
__ install /data/media/∅/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
File_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /data/media/Download/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip
(Status 7)
Installation aborted.
So I tried again by rebooting system ,went to settings ,reset the phone to factory mode ,downloaded it again, repeated the process and just the same thing happened again after again because i tried doing it from the recovery where i applied from phone storage but its still the same thing and i really dont like the HTC version of android kitkat especially for its keyboard and input it has the worst emojis on earth even when i downloaded a new keyboard from play store It didn't change whatever retrostyled emoji was on the typing space!
Please help!!!!!!!
Posted from my former device Itel it1408 that's definitely got a better software if not for the RAM

Menchiza said:
So i got an unlocked/sprint(I think!) version of HTC one m7 just recently and after checking everything out I figured it had some really retro and boring app display interface then I tried checking about phone only to discover It was using the old android 4.4.2 KitKat version so i tried checking for software updates and yes I found one that sized up to 325.18MB and I downloaded it after which i tried installing ,everything was going fine until it got to about ¼ way through the process loader in recovery where it jumped straight to another page that read.
Reboot system now
Apply from SD card
Wipe data/factory reset
Wipe cache partition
Reboot to boot loader
Power down
View recovery logs
Apply from phone storage (all which were to be navigated through and where in blue while beneath and in yellow .......)
__ install /data/media/∅/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
File_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /data/media/Download/OTA_M7_WL_K44_SENSE6∅_SPC_MR_Sprint_WWE _5.05.0651.2-5.03.651.3_release_393199.zip
(Status 7)
Installation aborted.
So I tried again by rebooting system ,went to settings ,reset the phone to factory mode ,downloaded it again, repeated the process and just the same thing happened again after again because i tried doing it from the recovery where i applied from phone storage but its still the same thing and i really dont like the HTC version of android kitkat especially for its keyboard and input it has the worst emojis on earth even when i downloaded a new keyboard from play store It didn't change whatever retrostyled emoji was on the typing space!
Please help!!!!!!!
Posted from my former device Itel it1408 that's definitely got a better software if not for the RAM
Click to expand...
Click to collapse
Someone modded files in /system that's why the ota won't install.
A factory reset only wipes contents from /data/media/0. It doesn't fix or restore /system to factory.
Your best option are to flash a RUU or a custom Rom.
Would help to know your "fastboot getvar all" and also your bootloader status (locked, unlocked or relocked)

alray said:
Someone modded files in /system that's why the ota won't install.
A factory reset only wipes contents from /data/media/0. It doesn't fix or restore /system to factory.
Your best option are to flash a RUU or a custom Rom.
Would help to know your "fastboot getvar all" and also your bootloader status (locked, unlocked or relocked)
Click to expand...
Click to collapse
OK but uhm! How do I get to know this "fastboot getvar all" ? And the phone is s-off and bootloader locked

Menchiza said:
OK but uhm! How do I get to know this "fastboot getvar all" ? And the phone is s-off and bootloader locked
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=76115519&postcount=2

NOTE 8 sm n950f firmware error problems

i have a note 8 sm n950 i done the android update a few months ago and and it got my phone stuck in a boot loop, i installed new firmware which i was able to use the phone again but lost data signal, i fixed that but now my calls and text are coming through with a german number (im in the UK) i have tried to install stock firmware using odin and keep getting sw rev check fail device 11 binary 6 (and other variations of that error) i have also tried clearing the cache and wiping the phone from the boot menu but no luck, could anyone help, i would be very grateful

Have you check that you have downloaded and installed the correct version of the OS on your device?

pazler said:
i have a note 8 sm n950 i done the android update a few months ago and and it got my phone stuck in a boot loop, i installed new firmware which i was able to use the phone again but lost data signal, i fixed that but now my calls and text are coming through with a german number (im in the UK) i have tried to install stock firmware using odin and keep getting sw rev check fail device 11 binary 6 (and other variations of that error) i have also tried clearing the cache and wiping the phone from the boot menu but no luck, could anyone help, i would be very grateful
Click to expand...
Click to collapse
The binary error you are getting is because you are trying to flash older filmware than what is already on the phone., this is not possible because of security updates. Downloading the latest filmware for you device should resolve this error, and then hopefully fix the other errors you face.

stonedpsycho said:
The binary error you are getting is because you are trying to flash older filmware than what is already on the phone., this is not possible because of security updates. Downloading the latest filmware for you device should resolve this error, and then hopefully fix the other errors you face.
Click to expand...
Click to collapse
im pretty sure i have tried the latest one for my phone, as i have tried many others but i was never 100% certain it was, could you point me in the direction of one?

pazler said:
im pretty sure i have tried the latest one for my phone, as i have tried many others but i was never 100% certain it was, could you point me in the direction of one?
Click to expand...
Click to collapse
In post number 2 in the thread below, you can install "samfirm" on your Pc, this will give you the latest update to download, at a fast speed. For region (on samfirm) put your service provider, ie BTU or XEU for the UK.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072

stonedpsycho said:
In post number 2 in the thread below, you can install "samfirm" on your Pc, this will give you the latest update to download, at a fast speed. For region (on samfirm) put your service provider, ie BTU or XEU for the UK.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
Click to expand...
Click to collapse
seems to of worked fine, no problems yet, thank you!

pazler said:
seems to of worked fine, no problems yet, thank you!
Click to expand...
Click to collapse
Glad to hear :highfive:

stonedpsycho said:
Glad to hear :highfive:
Click to expand...
Click to collapse
sooooo.... it was working fine for a couple days then the phone froze with a glitched horizontal line on the screen, i rebooted the phone and thought nothing more of it. A day later did the same thing (different place in the screen this time) i have wiped the cache a few time times but it hasnt improved. It is also freezing on the samsung loading screen and or getting stuck in a boot loop, the phone does work normaly for short amounts of time (few hours or so) but keeps happening, i managed to copy this log from the recovery menu if any help
p.s this is simlar to the original problem i was having before i changed the firmware
fail to open recovery_cause(no such file or directory)#
#reboot recovery cause is [unknown]#
support single-sku
file-based OTA
supported API: 3
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
# manual mode v1.0.0#
remove failed dir '/system/carrier/ATT/priv-app/AttIqi_ATT'(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/cid/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/cid/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/permissioins'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/permissioins'.(No such file or directory)
E:[libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree/firmware/android/compatible' : no such file or directory
E:[libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree/firmware/android/compatible' : no such file or directory

pazler said:
sooooo.... it was working fine for a couple days then the phone froze with a glitched horizontal line on the screen, i rebooted the phone and thought nothing more of it. A day later did the same thing (different place in the screen this time) i have wiped the cache a few time times but it hasnt improved. It is also freezing on the samsung loading screen and or getting stuck in a boot loop, the phone does work normaly for short amounts of time (few hours or so) but keeps happening, i managed to copy this log from the recovery menu if any help
p.s this is simlar to the original problem i was having before i changed the firmware
fail to open recovery_cause(no such file or directory)#
#reboot recovery cause is [unknown]#
support single-sku
file-based OTA
supported API: 3
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
# manual mode v1.0.0#
remove failed dir '/system/carrier/ATT/priv-app/AttIqi_ATT'(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/cid/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/cid/sysconfig'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/permissioins'.(No such file or directory)
can't open directory '/sytem/omc/SUP/ect/permissioins'.(No such file or directory)
E:[libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree/firmware/android/compatible' : no such file or directory
E:[libfs_mgr]is_dt_compatible(): firmware info was not valid : '/proc/device-tree/firmware/android/compatible' : no such file or directory
Click to expand...
Click to collapse
This is beyond my knowledge. I would take a guess that you have some sort of hardware issue as flashing stock filmware usually resolves any software bug. Hopefully someone who has faced the same or someone more knowledgeable will be able to help you further.

HI Experts i am getting the same issue in my note 8 sm-n950f according to my knowledge i lost its efs and baseband partition by mistake and my phone now stuck on Galaxy Logo now the OEM System is locked by default i am not able to flash TWRP please Suggest me how can i recover pretty phone back in Normal Condition :crying:

mehroz1234 said:
HI Experts i am getting the same issue in my note 8 sm-n950f according to my knowledge i lost its efs and baseband partition by mistake and my phone now stuck on Galaxy Logo now the OEM System is locked by default i am not able to flash TWRP please Suggest me how can i recover pretty phone back in Normal Condition :crying:
Click to expand...
Click to collapse
As we have said many of times before, if you lost your EFS folder and you never made a backup of it then you're screwed and you'll need to send it to Samsung for repair because you can't use anyone else's EFS because the EFS holds your IMEI and the phones serial numbers and such. It's information that's never supposed to be removed or deleted.. However someone else said if you delete certain stuff in the EFS folder and then reflash it that it would work and I tried this method and it failed to work so I don't know any other way except sending it to Samsung repair facility.. It also requires root access which you obviously can't do since it's OEM is not unlocked so I really doubt there's anything you can do short of sending it to Samsung..
https://forum.xda-developers.com/ga...i-detect-sim-card-t4134733/page2#post83127549
This is the link but like I said this didn't work for me..