So as we are all aware, the captivate does not have a front facing camera. This doesn't bother me considering I never video chat. However, that may not be the same case for others. I was thinking today, computers and laptops have plugin webcams for USB ports. Why not smartphones? It could plug right into the top of the phone via the micro USB port and be the size of something like a wireless mouse receiver for a laptop. Could something like this physically be done? I know people who could do the physical part of the work like make the actual prototype, but would any coding/scripting need to be done inside the phone? I think it something alot of people want/need and could be profitable if successful. Share your opinions. Sorry if this is in the wrong forum or is a prepost...
Sent from my SAMSUNG-SGH-I897 using XDA App
sandrich said:
So as we are all aware, the captivate does not have a front facing camera. This doesn't bother me considering I never video chat. However, that may not be the same case for others. I was thinking today, computers and laptops have plugin webcams for USB ports. Why not smartphones? It could plug right into the top of the phone via the micro USB port and be the size of something like a wireless mouse receiver for a laptop. Could something like this physically be done? I know people who could do the physical part of the work like make the actual prototype, but would any coding/scripting need to be done inside the phone? I think it something alot of people want/need and could be profitable if successful. Share your opinions. Sorry if this is in the wrong forum or is a prepost...
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I think if people are going to have to carry around a separate piece of equipment for video chat, they may as well not worry about software and just use one of those mirror attachments I have seen out there. Then you'd have a 5 MP FFC instead of a 1.3 MP one like most FFCs.
I for one would like that feature. It will be a while before I can upgrade again to a newer phone that has video chat and such. I don't know coding and such but I couldn't see why someone couldn't create an app that can be installed with said hardware if one was made. I too think something like that would be awesome. I can't see why if one can be added onto a laptop ( that doesn't already have one) with the added program files why something like that wouldn't work here.
I wouldn't mind carrying a extra bit of hardware with me. I mean I already bring with me an extra battery charger and my bluetooth and wired headsets. It wouldn't be something that would be used all the time. Another feature that our cpativates are lacking that could be added is a led light for when using the webcam. I have thought about making a case or something that has a led light that can (at least) run off a seperate battery and have a switch to turn on the light. But if something could. E done with a webcam that has a light also ( possibly a swivel webcam that rotates so you can either use it for video chat or as a seperate video camera) then you could have the led light turn on when needed for the camera or video functions. Good luck and make millions$. I am sure something like that could be a big seller for even cross platforms for phones that do not have video webcam/ chat or at least for all the android phones that don't.
Sent from MY Perception 10.1 on XDA App
It is possible. Just need someone to work on it. See the link in this thread:
http://forum.xda-developers.com/showthread.php?t=872377
GAMacky said:
It is possible. Just need someone to work on it. See the link in this thread:
http://forum.xda-developers.com/showthread.php?t=872377
Click to expand...
Click to collapse
Sounds like we should start a bounty. I'd love to be able to attach a MIDI controller.
The camera really would not need to be that big. If you look at the size of the camera night now its basically as big as a shirt button. I was thinking if you used something like a JIG but with a small camera on top it really should be no bigger then a quarter. Personally I be willing to pay maybe $100 for a little plug in video camera like that.
I would really like to see something like what the Motorola Atrix has going on with the ability to connect to a computer a basically have the Android OS running as separate OS. http://www.youtube.com/watch?v=uWIe8wQBqS0&hd=1
That would be a great idea.... But its probably done, just some product marketing guy needs to say ok sell it....
Cause doesn't the new google laptop have a webcam? That webcam piece is the size of strip of gum usually. Just need the connector and done.
I would much rather have some sort of small mirror/prism attachment that would piggy-back on the top of the phone, feeding my image into the already existing image into the camera.
Heck,
would sitting in front of a mirror and using skype/qik work?
According to androidtablets.net not only does the the nook color have a bluetooth chip but also a fm radio chip but with stock os you cant use it of course. Does this mean that with cm7 you can also access the fm radio ability like it allows you with bluetooth? If anyone knows please post below.
No, the FM chipset is not connected to any sort of antenna therefore it does not work, regardless of if your running stock or CM.
Midnitte said:
No, the FM chipset is not connected to any sort of antenna therefore it does not work, regardless of if your running stock or CM.
Click to expand...
Click to collapse
Ok but could it be possible to add an wire antenna? Or could you add one like that of an android phone as someone did with an htcs speaker and added it to the nook or is it impossible?
Some phones use headphones as the antenna. I wondered this about the nook, but never cared to find out.
Good Question
colorfulnookie said:
Ok but could it be possible to add an wire antenna? Or could you add one like that of an android phone as someone did with an htcs speaker and added it to the nook or is it impossible?
Click to expand...
Click to collapse
I have wondered about this myself. I bought and learned how to root my Droid 4 for the sole purpose of having the FM radio. I am working on getting my Nook Color to run CM7, and found your post when I searched. I know on my D4 I needed to have it rooted and installed Spirit FM, it works well with the headphones attached. I also found a way to make an antenna using a Radio Shack plug and the antenna off an old cordless phone handset, It works surprisingly well! I don't see why it wouldn't work for the NC, IF it has the fm chip, and IF we can access it. I don't know if Spirit FM has been tested with it or not, but it's worth looking into.
KrellaKrentoshi said:
I have wondered about this myself. I bought and learned how to root my Droid 4 for the sole purpose of having the FM radio. I am working on getting my Nook Color to run CM7, and found your post when I searched. I know on my D4 I needed to have it rooted and installed Spirit FM, it works well with the headphones attached. I also found a way to make an antenna using a Radio Shack plug and the antenna off an old cordless phone handset, It works surprisingly well! I don't see why it wouldn't work for the NC, IF it has the fm chip, and IF we can access it. I don't know if Spirit FM has been tested with it or not, but it's worth looking into.
Click to expand...
Click to collapse
This has been addressed many times, in this forum and others. To my knowledge no one has gotten anything other than static from any app (Spirit included) with any headphones at any time. I'd guess that there is no connection between the radio chip and the headphone socket, for antenna functionality.
I haven't pursued this in a while though, so there could be newer info out there.
Hmmm
tonestertm said:
This has been addressed many times, in this forum and others. To my knowledge no one has gotten anything other than static from any app (Spirit included) with any headphones at any time. I'd guess that there is no connection between the radio chip and the headphone socket, for antenna functionality.
I haven't pursued this in a while though, so there could be newer info out there.
Click to expand...
Click to collapse
Good to know. I will do a little searching in the morning and post any info I may find. Do you know if any guts tinkering has occured to make that connection? I am hoping for a simple, easy solution, like modifying an atrix lapdock to work for a Droid phone
KrellaKrentoshi said:
Good to know. I will do a little searching in the morning and post any info I may find. Do you know if any guts tinkering has occured to make that connection? I am hoping for a simple, easy solution, like modifying an atrix lapdock to work for a Droid phone
Click to expand...
Click to collapse
Been doing some digging since I last posted, and the news, I'm afraid, is not promising.
I learned that the FM receive and transmit (!) antenna functions of the WL1271 chip are on different pins than the WLAN/Bluetooth antenna pins.
In addition, there are dedicated FM Audio Out L/R pins which I would suspect are not provided for on the Nook board/module. It's not clear to me if these are the only outlet for any FM decoded by the chip, though.
These, along with the fact that TI pretty much abandoned the FM feature of this chip in the OMAP implementation, (by their own admission) make the FM radio function for us... challenging.
tonestertm said:
Been doing some digging since I last posted, and the news, I'm afraid, is not promising.
I learned that the FM receive and transmit (!) antenna functions of the WL1271 chip are on different pins than the WLAN/Bluetooth antenna pins.
In addition, there are dedicated FM Audio Out L/R pins which I would suspect are not provided for on the Nook board/module. It's not clear to me if these are the only outlet for any FM decoded by the chip, though.
These, along with the fact that TI pretty much abandoned the FM feature of this chip in the OMAP implementation, (by their own admission) make the FM radio function for us... challenging.
Click to expand...
Click to collapse
Challenging isn't the same as impossible, and it must surely be easier than trying to get CM7 installed to SD card for my NC. I'm beyond stuck on that one, been trying off an on for a year. It seems to me that if the problem lies in the hardware, we should be able to correct that. BTW, did I see correctly, there may be FM TRANSMIT capabilities?! That would rock!! I would be blissfully happy just getting FM recieve to work. If the pins aren't provided for on the NC board, what would be a possible way to correct that?
KrellaKrentoshi said:
Challenging isn't the same as impossible,
Click to expand...
Click to collapse
True.
and it must surely be easier than trying to get CM7 installed to SD card for my NC.
Click to expand...
Click to collapse
I had difficulty with that the first time, too. I can probably help, but either in PM or another thread; been running SD cards for about as long as you've been trying.
It seems to me that if the problem lies in the hardware, we should be able to correct that. BTW, did I see correctly, there may be FM TRANSMIT capabilities?! ...
Click to expand...
Click to collapse
Unfortunately, even though there are some great resources around (see the Novaports sticky above, for one) there's just not enough solid info yet to discover whether there's access to the necessary pin. The whole chip is about 1/4 inch square, containing about 115 contact sites in what's called a ball grid array, or BGA, all on the bottom surface of that tiny, "wahfer-thin" speck. This is married to a daughtercard which brings the necessary contacts out to the real world and has some more circuitry (most notably the chip which handles the wireless/bluetooth antenna switching). There's no way to tell from the pictures I've found whether they designed any access to the FM receive pin for the outside world. And I'd bet good solid money that there's no access to the FM transmit pins (separate Antenna and Audio L/R).
So, not impossible, but the real question is, how much would you be willing to spend to re-engineer a new daughtercard to gain access to these things (if, in fact, they're not accessible)? It would undoubtedly be more than the price of a brand new tablet which already contains all these things and more.
If they did bring the RX pin out on the daughtercard, then it should be possible to do some microsoldering and a lot of what I've just said is moot. But without disassembling one I have no way of knowing. If this were the case, then Spirit would likely be the way to go, as I ran across indications that Mike was doing some serious digging into this issue last year. There's also an infinitesimal ray of hope for drivers from a ROM that somebody put together for one of the Droids, which uses the same chip, that apparently has FM working.
I suppose one moderately simple test would be to load up Spirit, and bring a moderately powerful FM transmitter right up to the base end of the Nook, hoping for some leakage through all the shielding, and see if a signal can be picked up. Unfortunately, unless the result were positive, we'd be no further than we already are.
Oh. Ok
tonestertm said:
True.
I had difficulty with that the first time, too. I can probably help, but either in PM or another thread; been running SD cards for about as long as you've been trying.
Unfortunately, even though there are some great resources around (see the Novaports sticky above, for one) there's just not enough solid info yet to discover whether there's access to the necessary pin. The whole chip is about 1/4 inch square, containing about 115 contact sites in what's called a ball grid array, or BGA, all on the bottom surface of that tiny, "wahfer-thin" speck. This is married to a daughtercard which brings the necessary contacts out to the real world and has some more circuitry (most notably the chip which handles the wireless/bluetooth antenna switching). There's no way to tell from the pictures I've found whether they designed any access to the FM receive pin for the outside world. And I'd bet good solid money that there's no access to the FM transmit pins (separate Antenna and Audio L/R).
So, not impossible, but the real question is, how much would you be willing to spend to re-engineer a new daughtercard to gain access to these things (if, in fact, they're not accessible)? It would undoubtedly be more than the price of a brand new tablet which already contains all these things and more.
If they did bring the RX pin out on the daughtercard, then it should be possible to do some microsoldering and a lot of what I've just said is moot. But without disassembling one I have no way of knowing. If this were the case, then Spirit would likely be the way to go, as I ran across indications that Mike was doing some serious digging into this issue last year. There's also an infinitesimal ray of hope for drivers from a ROM that somebody put together for one of the Droids, which uses the same chip, that apparently has FM working.
I suppose one moderately simple test would be to load up Spirit, and bring a moderately powerful FM transmitter right up to the base end of the Nook, hoping for some leakage through all the shielding, and see if a signal can be picked up. Unfortunately, unless the result were positive, we'd be no further than we already are.
Click to expand...
Click to collapse
So I guess the best thing I can do for the moment is to get CM7 to boot and try Spirit on it. I can do that, and I have a transmitter that might work too. I will post the results.
KrellaKrentoshi said:
Challenging isn't the same as impossible, and it must surely be easier than trying to get CM7 installed to SD card for my NC. I'm beyond stuck on that one, been trying off an on for a year. It seems to me that if the problem lies in the hardware, we should be able to correct that.
Click to expand...
Click to collapse
Really?
have you tried this post?
http://forum.xda-developers.com/showthread.php?t=1000957
because that's been around for quite some time...and it is rather easy...
and it's been around for well over a year....
just sayin...
yep
I have tried it, and 2 others, and im stuck.
KrellaKrentoshi said:
I have tried it, and 2 others, and im stuck.
Click to expand...
Click to collapse
okay...it's pretty simple...but i'll bite....where are you stuck? what exactly about the process is messing you up...
you get the CM7 image, burn it to your SD card using the program provided...insert it into the nook and press the power button...
plasticarmyman said:
okay...it's pretty simple...but i'll bite....where are you stuck? what exactly about the process is messing you up...
you get the CM7 image, burn it to your SD card using the program provided...insert it into the nook and press the power button...
Click to expand...
Click to collapse
..........and watch the little blue android on the skateboard for the next 20 mins until i shut it off. It wont get past the blue dude's splashscreen. I'm working on it on another thread and PM. In the meantime, do ya think you could run the little experiment mentioned a few posts back please?
I made some progress today!!
tonestertm said:
True.
I had difficulty with that the first time, too. I can probably help, but either in PM or another thread; been running SD cards for about as long as you've been trying.
Unfortunately, even though there are some great resources around (see the Novaports sticky above, for one) there's just not enough solid info yet to discover whether there's access to the necessary pin. The whole chip is about 1/4 inch square, containing about 115 contact sites in what's called a ball grid array, or BGA, all on the bottom surface of that tiny, "wahfer-thin" speck. This is married to a daughtercard which brings the necessary contacts out to the real world and has some more circuitry (most notably the chip which handles the wireless/bluetooth antenna switching). There's no way to tell from the pictures I've found whether they designed any access to the FM receive pin for the outside world. And I'd bet good solid money that there's no access to the FM transmit pins (separate Antenna and Audio L/R).
So, not impossible, but the real question is, how much would you be willing to spend to re-engineer a new daughtercard to gain access to these things (if, in fact, they're not accessible)? It would undoubtedly be more than the price of a brand new tablet which already contains all these things and more.
If they did bring the RX pin out on the daughtercard, then it should be possible to do some microsoldering and a lot of what I've just said is moot. But without disassembling one I have no way of knowing. If this were the case, then Spirit would likely be the way to go, as I ran across indications that Mike was doing some serious digging into this issue last year. There's also an infinitesimal ray of hope for drivers from a ROM that somebody put together for one of the Droids, which uses the same chip, that apparently has FM working.
I suppose one moderately simple test would be to load up Spirit, and bring a moderately powerful FM transmitter right up to the base end of the Nook, hoping for some leakage through all the shielding, and see if a signal can be picked up. Unfortunately, unless the result were positive, we'd be no further than we already are.
Click to expand...
Click to collapse
I got my NC running CM 7.2.0. Turns out I needed to rename the ROM and also something was bad on my SD card. I have been happily exploring CM7 and getting my google apps on my NC for 2 hours now. Among the apps I downloaded is Spirit FM, the free version for testing. It loads well, I plugged in headphones and an antenna and can't get a signal, not even static. I will look for my transmitter tonight/tomorow and see what happens then. Thanks for all the encouragement and support on the CM7 thing yall!
Yay!
KrellaKrentoshi said:
I got my NC running CM 7.2.0. Turns out I needed to rename the ROM and also something was bad on my SD card. I have been happily exploring CM7 and getting my google apps on my NC for 2 hours now. Among the apps I downloaded is Spirit FM, the free version for testing. It loads well, I plugged in headphones and an antenna and can't get a signal, not even static. I will look for my transmitter tonight/tomorow and see what happens then. Thanks for all the encouragement and support on the CM7 thing yall!
Click to expand...
Click to collapse
Looking forward to your results. And, Enjoy!
I did the test.....
tonestertm said:
True.
I had difficulty with that the first time, too. I can probably help, but either in PM or another thread; been running SD cards for about as long as you've been trying.
Unfortunately, even though there are some great resources around (see the Novaports sticky above, for one) there's just not enough solid info yet to discover whether there's access to the necessary pin. The whole chip is about 1/4 inch square, containing about 115 contact sites in what's called a ball grid array, or BGA, all on the bottom surface of that tiny, "wahfer-thin" speck. This is married to a daughtercard which brings the necessary contacts out to the real world and has some more circuitry (most notably the chip which handles the wireless/bluetooth antenna switching). There's no way to tell from the pictures I've found whether they designed any access to the FM receive pin for the outside world. And I'd bet good solid money that there's no access to the FM transmit pins (separate Antenna and Audio L/R).
So, not impossible, but the real question is, how much would you be willing to spend to re-engineer a new daughtercard to gain access to these things (if, in fact, they're not accessible)? It would undoubtedly be more than the price of a brand new tablet which already contains all these things and more.
If they did bring the RX pin out on the daughtercard, then it should be possible to do some microsoldering and a lot of what I've just said is moot. But without disassembling one I have no way of knowing. If this were the case, then Spirit would likely be the way to go, as I ran across indications that Mike was doing some serious digging into this issue last year. There's also an infinitesimal ray of hope for drivers from a ROM that somebody put together for one of the Droids, which uses the same chip, that apparently has FM working.
I suppose one moderately simple test would be to load up Spirit, and bring a moderately powerful FM transmitter right up to the base end of the Nook, hoping for some leakage through all the shielding, and see if a signal can be picked up. Unfortunately, unless the result were positive, we'd be no further than we already are.
Click to expand...
Click to collapse
Houston, we have a problem. I have a stock nook running cm7 on sd card. Spirit FM Free with superuser permissions granted couldn't pick up the transmitter. :crying: I even put the transmitter right up against the nook and didn't hear anything, so it's not looking very good. I know on my droid 4 I had to have it rooted in order for the FM to work, I wonder if that is the case here? Anyone got a rooted nook to try this experiment out on? Once my warrenty is up I will try "nooting" and see if FM works then. If it is the daughter card, I am at a loss. Anyone got an idea about what we can do next? tonestertm, I can't find your Novoports sticky. Can you repost the link please?:good:
KrellaKrentoshi said:
tonestertm, I can't find your Novoports sticky. Can you repost the link please?:good:
Click to expand...
Click to collapse
No need for a link, the Novaports thread is the third one down from the top of this forum.
Hi guys this shoud work on the lg g2 great for watching my F1 on the go and without using loads of data on my phone great kit.
http://www.ebay.co.uk/itm/310802737212?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This is awesome. I wish it was cheaper here in the US
Sent from my LG-LS980 using xda app-developers app
This looks very cool. Any confirmation that it indeed works? Most of the phones listed I think use mhl, not slimport and I'd think this would only work with mhl compatible phones which the G2 is not.
This has nothing to do with MHL. It should work with anything that supports USB OTG. It's not outputting any signal...
@op You should actually try this http://www.tivizen.com/icube/nano/index.html
The reason behind my suggestion and because I have searched the whole DVB-T micro usb android tuners a lot is that with the one you are suggesting the micro usb port is occupied by the tuner. As a result, you will not be able to charge your phone at the same time. So, imagine yourself with 10% battery and the F1 race just starting, Waht would you prefer... being able to charge your phone and watch the race at the same time or watch the first 10 (max) minutes and then wonder what has happened during the rest of the race.
Otg charge y cable is what you want ....charge and org same time ?
Sent from my LG-D803 using XDA Premium 4 mobile app
Do these support the North American channels, and does this use Verizon Data to stream these or is it just over the air signal?
Use your brain.. why would it have its own antenna and be called a "tuner" if it required smartphone data ?!?
You never know, did you design the equipment, people are trying to exploit costs everywhere.
Cool product. Wonder if this works? I travel often, usually hotels have cable, but you never know.
Sent from my Nexus 7 using XDA Premium 4 mobile app
In the specs of the item listed in the OP, it states the device must have Neon support. Can anyone confirm our device has this support? I have tried reading the cpuinfo file but have been unable to open the file as text to confirm this. If indeed our devices do have Neon support, then I see no reason why it shouldn't work.
Kiwi_Dude said:
In the specs of the item listed in the OP, it states the device must have Neon support. Can anyone confirm our device has this support? I have tried reading the cpuinfo file but have been unable to open the file as text to confirm this. If indeed our devices do have Neon support, then I see no reason why it shouldn't work.
Click to expand...
Click to collapse
All Snapdragon SOC's have Krait CPU's which have NEON.
http://en.wikipedia.org/wiki/Krait_(CPU)
I have not seen any specific threads addressing this, and thus far I am guessing I know the answer to my own question.. but is it possible to use my device for audio instead of my television? My specific issue is the fact that I am using an old computer monitor for my chromecast in my bedroom. It does not have HDMI, so I am using an HDMI to DVI converter (no audio). I'm fairly certain that there's no way (doubt my Nexus 7 being rooted would help) to stream the audio through my device but I thought I'd ask anyway. Thanks people.
Jersey846 said:
I have not seen any specific threads addressing this, and thus far I am guessing I know the answer to my own question.. but is it possible to use my device for audio instead of my television? My specific issue is the fact that I am using an old computer monitor for my chromecast in my bedroom. It does not have HDMI, so I am using an HDMI to DVI converter (no audio). I'm fairly certain that there's no way (doubt my Nexus 7 being rooted would help) to stream the audio through my device but I thought I'd ask anyway. Thanks people.
Click to expand...
Click to collapse
Not really since the CCast for all intents and purposes is pulling the file from the source and while you could probably get the mbile device to pull the same file it would be next to impossible to sync the two in any meaningful way.
Your best bet is to get a HDMI to VGA Breakout cable/box that will pull the Audio out of the HDMI so you can plug into an amp or Powered Speakers.
http://www.amazon.com/HDMI-VGA-converter-Audio-Converter/dp/B003O55U8K
But if you use one of those your likely to lose the ability to play some content that requires HDCP to play (I'm thinking Netflix might require this)
Asphyx said:
Not really since the CCast for all intents and purposes is pulling the file from the source and while you could probably get the mbile device to pull the same file it would be next to impossible to sync the two in any meaningful way.
Your best bet is to get a HDMI to VGA Breakout cable/box that will pull the Audio out of the HDMI so you can plug into an amp or Powered Speakers.
http://www.amazon.com/HDMI-VGA-converter-Audio-Converter/dp/B003O55U8K
But if you use one of those your likely to lose the ability to play some content that requires HDCP to play (I'm thinking Netflix might require this)
Click to expand...
Click to collapse
That was an idea I had. But that looks like a VGA when the computer monitor has DVI. To get what I'd need to get sound running with the converter price wise, it'd almost make more sense just to get something that has an HDMI input. This was only a temporary method until I get married. After that we'll have plenty of devices collectively to get anything we need working on any of our televisions. I'd use my television with my Chromecast but around 4 years ago the HDMI ports were fried by the cable guy somehow. So all I have connected now is a 360 connected through component cables. If it wasn't for my Android phone and tablet I'd be in the technological stone age.
Jersey846 said:
That was an idea I had. But that looks like a VGA when the computer monitor has DVI.
Click to expand...
Click to collapse
You can get an HDMI audio extractor box but make sure it has the type of audio you need (analog, digital coax, or digital optical)
Some computer monitors allow audio over DVI, but it's still hit and miss.
bhiga said:
You can get an HDMI audio extractor box but make sure it has the type of audio you need (analog, digital coax, or digital optical)
Some computer monitors allow audio over DVI, but it's still hit and miss.
Click to expand...
Click to collapse
That'd be where I went on amazon and bought the wrong thing. I'll look them up though thanks!
Sent from my Droid Razr M using xda app-developers app
Jersey846 said:
That'd be where I went on amazon and bought the wrong thing. I'll look them up though thanks!
Click to expand...
Click to collapse
You want something like this
http://www.amazon.com/ViewHD-Premiu...d_sim_e_1?ie=UTF8&refRID=03D4CC082H41SMFNMZYT
bhiga said:
You want something like this
http://www.amazon.com/ViewHD-Premiu...d_sim_e_1?ie=UTF8&refRID=03D4CC082H41SMFNMZYT
Click to expand...
Click to collapse
Yeah I considered that. But with all things considered, a $40 price tag is a pretty steep alternative for what I was hoping. Maybe when Chromecast mirroring is released it will accomplish what I was hoping for.
Sent from my Nexus 7 using xda app-developers app
Jersey846 said:
Yeah I considered that. But with all things considered, a $40 price tag is a pretty steep alternative for what I was hoping. Maybe when Chromecast mirroring is released it will accomplish what I was hoping for.
Click to expand...
Click to collapse
True. That's why I didn't post the $99 one.
If your TV is under warranty I'd get it fixed.
Even if you got audio out of your device it would be very difficult to sync it with what's playing on Chromecast, as they'd essentially be pulling two entirely separate streams.
The same would hold for Android screen mirroring when it arrives, but that would be a delay due to having to get the screen data to Chromecast.
bhiga said:
True. That's why I didn't post the $99 one.
If your TV is under warranty I'd get it fixed.
Even if you got audio out of your device it would be very difficult to sync it with what's playing on Chromecast, as they'd essentially be pulling two entirely separate streams.
The same would hold for Android screen mirroring when it arrives, but that would be a delay due to having to get the screen data to Chromecast.
Click to expand...
Click to collapse
TV is fairly old and hasn't been under warranty for a while. It's a 47". Once we get married we'll be purchasing a 60" or so one. The 360 works fine with component cable on it for now. I'll be using the Chromecast with the newer TV. If I didn't have that engagement ring expense I'd already have that 60" along with my '69 Charger. She offered to help pay for it, but what's the fun in that?!
Sent from my Droid Razr M using xda app-developers app
Jersey846 said:
If I didn't have that engagement ring expense I'd already have that 60" along with my '69 Charger. She offered to help pay for it, but what's the fun in that?!
Click to expand...
Click to collapse
If we're lucky maybe Google will enable the Bluetooth so we can have some Bluetooth audio, but I wouldn't hold my breath.
bhiga said:
If we're lucky maybe Google will enable the Bluetooth so we can have some Bluetooth audio, but I wouldn't hold my breath.
Click to expand...
Click to collapse
Now that'd be an interesting feature! Didn't think of that actually. Wouldn't they need new hardware for that like on a Chromecast 2?
Sent from my Droid Razr M using xda app-developers app
Jersey846 said:
Now that'd be an interesting feature! Didn't think of that actually. Wouldn't they need new hardware for that like on a Chromecast 2?
Click to expand...
Click to collapse
Not necessarily. iFixit's teardown showed the radio is an AzureWave AW-NH387 802.11 b/g/n WLAN, Bluetooth and FM Combo Module, so it's Bluetooth 3.0 capable and compatible with North American and European FM radio bands.
In theory Google could give us Chromecast FM, hehe.
The Lytro camera had similar radio capabilities which were disabled at launch. They eventually enabled the WiFi, though in an AdHoc mode, and they've pretty much written off Android support, so it was a bit of a wash to me.
Jersey846 said:
That was an idea I had. But that looks like a VGA when the computer monitor has DVI. To get what I'd need to get sound running with the converter price wise, it'd almost make more sense just to get something that has an HDMI input. This was only a temporary method until I get married. After that we'll have plenty of devices collectively to get anything we need working on any of our televisions. I'd use my television with my Chromecast but around 4 years ago the HDMI ports were fried by the cable guy somehow. So all I have connected now is a 360 connected through component cables. If it wasn't for my Android phone and tablet I'd be in the technological stone age.
Click to expand...
Click to collapse
They sell the same type of box with DVI output...So just buy the appropriate box for your connections.
You can find them for under $100 (prob around $60) but then again if your going to spend that much your probably better off just saving for a good TV which would accommodate all your devices properly.
bhiga said:
In theory Google could give us Chromecast FM, hehe.
Click to expand...
Click to collapse
I'd use it!
Sent from my Nexus 7 using xda app-developers app