Quick Qs - Wanam Xposed, Tethering, and disabling OTA - AT&T Samsung Galaxy S 5

Hey folks!
I followed the instructions posted by allcaps33 at http://forum.xda-developers.com/showthread.php?p=53549710 to get provisioning disabled, and the native hotspot app is working for me now! I just wanted to confirm if this was an operation similar to running Wifi Tether Router on an unlocked/rooted device (I had an S2Sky prior that I tethered off of regularly). I've got one of those too-rare Unlimited Data plans and am traveling cross-country, made possible by being able to tether my laptop to my phone to work. Just wanting to confirm that this was relatively as secure as using the Wifi Tether Router on my S2Sky. On a semi-related note, that app doesn't seem to want to run properly on my S5; when I click Enable Router it turns on the Wifi, which immediately connects to the house's wired router. It still broadcasts but doesn't send data, and it's hit or miss if a device can even connect to it from there.
Next question - I'm used to flashing a CM ROM within the first couple days of getting a new phone, which doesn't seem feasible just yet with the S5 (from what I can tell anyway; I'm not used to having a current-gen device). I've heard about the myriad evils of OTA updates, and was hoping to get help on how to disable them. I would like to avoid my device upgrading to a point where my above-stated desired functionality is disabled. Ideally, I'd like to get rid of the various bloatware apps as well, though am not sure how to go about that.
I appreciate your time and support, and thanks for being a community that's always been there for me as I derp along with my fancy internet boxes!

Hi!
The absolute easiest way is to use Rom Toolbox. I have the pro version, but I believe it's available in the lite version as well.
Download and open up RTB.
Tap on "App Manager"
Then scroll down until you see "AT&T Software Update"
Tap on it.
A popup will display. Swipe from right to left, and you will be on the "Advanced" tab.
Scroll down and tap on "Advanced Freeze."
You will come to a screen which shows you the Activities, Recievers, Services, and Providers. Tap on EACH box/line. This will Disable OTA services.
We're not done yet!
Go back to the App Manager screen again, and repeat the process for an app called "LocalFOTA"
Finished!
I also Disable most of the bloatware and Knox this way.
Have fun!
---------- Post added at 12:58 PM ---------- Previous post was at 12:49 PM ----------
Now for the hard part...
Yes this can be as secure as the other the tether. Ensure you use and change the password service with the app.
As for the tether turning your wifi on, it is supposed to do that. The best way to get this to work is to turn the tether on and off (then on again). If this does not work, try emptying the data/cache for the built-in tether app. And start from scratch.

allcaps33 said:
I also Disable most of the bloatware and Knox this way.
Click to expand...
Click to collapse
KNOX - What is it? I'm under the impression it's some sort of security for the phone, to protect from malicious activity that you might not be aware of, but also that it'll "tattle" on you if you mod your phone in a way AT&T doesn't approve.

Knox is two things.
1) It is a security container for apps. It works as both a license/drm type software for Samsung official apps.
And
2) Android contains a root environment at all times. This is what makes SU possible. It used to be quite easy to invoke Android system calls as root.
Root is actually separate from super user. Knox, like SEPolicy, helps dev companies detect, halt, and/or hinder apps, not su itself, but apps that that use these root system calls.
Be wise, even though Knox itself does not "report" these types of actions, it still logs them. And there are other apps that can read these logs and send out these reports. I should say (and I'm only guessing) that only work/company issued phones are setup like this. Not your personal phone.
In fact, our phones actually contain a file which logs all root system calls. It has nothing to do with Knox but, I believe this binary is what hinders us open devs, but makes it easy for Samsung and AT&T to restore/repair our phones.
For more info on Knox:
https://www.samsungknox.com/en/partners/app-developers

Related

[GUIDE] Enable Internet Tethering (hotspot) on Galaxy S4 i537 (AT&T)

I've been using the phone for a few days, and I'm not going back to my iPhone 4S now. Too many goodies on the GS4 Active and Android. I've resolved most of the issues I've been running into by myself (disabling some bloatware, installing stuff from the Google Play store, replacing the ****ty stock camera app with Camera Zoom Fx, etc).
So I tried to use internet tethering (mobile hotspot), and it is disabled. It tells me that Mobile data is not available or invalid SIM. The phone is an AT&T phone (I537), and I'm using it on the Fido network here in Canada on the 3G APN (not the LTE APN). Fido has internet tethering free by default (as it should be), I used it on my iPhone 4S, so I'm guessing that it is my phone which has the feature disabled even though my provider and data plan support it.
Do you think I could use the same trick that the regular GS4 guys are using to enable it, by changing some stuff in the TetheringProvision.apk file? I read it in the link below:
http://galaxys4root.com/galaxy-s4-tutorials/how-to-wifi-tether-att-galaxy-s4-sgh-i337/
Or is there a specific way that we can use to enable this feature? Thanks...
EDIT: Here is a full detailed guide, I just went through the process myself. Many thanks to bluesphere0 for the help!
Overview of steps:
>>> Root
>>> Quarantine 'TetheringProvision' to disable the software lock on hotspot
>>>* Use ES File Explorer to configure and turn on the hotspot
>>> Root
1) Start by rooting the device: http://forum.xda-developers.com/showthread.php?t=2347793
NOTE: For step #3 in that thread, after the apk installs, you will eventually be brought to a completion menu with 'Done' and 'Open' options. Choose the 'Open' option and it will tell you that you should have root access now. If you accidentally tap 'Done', you can just reinstall the apk again.
2) Get SuperSU on the Play Store. Open it, update the binaries, etc. Your device should be fully rooted at this point. You can check this by downloading Root Checker on the Play Store, but this is unnecessary.
>>> Quarantine 'TetheringProvision' to disable the software lock on hotspot
3) Enable USB Debugging (Settings > More > About Device > tap the Build Number about 10 times > back button > Developer options > check USB debugging). This is required by App Quarantine in order to quarantine files.
4) Get App Quarantine from the Play Store, tap the wrench icon at the top right, uncheck 'Hide system services', hit the back button, then tap on 'TetheringProvision' and tap on the lock icon at the top right. If successful, it will lock it up in the 'Quarantine' tab at the right. Check to make sure that it is in there. This 'freezes' the file which is responsible for locking down the hotspot functionality.
Alternatively, it may be possible to get away with just renaming the TetheringProvision.apk and TetheringProvision.odex files, but you may not be able to use ES File Explorer to do this, even if you have root access. It didn't work on my device even though I had root access. The solution is to get ROM Toolbox Lite, use the Root Explorer tool and rename it from there.
>>> Use ES File Explorer to configure and turn on the hotspot
5) Get ES File Explorer from the Play Store. Tap the hard key for menu, scroll down and tap on Net Manager. Tap on Settings at the bottom, select 'Use the system AP setting', enter an SSID (recommended to be short with no spaces, like 'MyName_GS4_Active'), and a password. Tap on OK. Tap on the back button. Tap on 'Create a hotspot network'. It will say 'Establishing Network...turning on', followed by 'Now you are using AP, SSID is...', AP password:, and an 'Exit' button. It may say 'Unfortunately, Settings has stopped' after this, but IGNORE it. Your hotspot is still active - look at the top left of the phone, you will see a wifi symbol in a blue icon, this is your indication that your hotspot is working.
Notes:
To turn ON the Wifi Tethering:
1) ES File Explorer > hit the menu key > Net Manager > Create a hotspot network.
You CANNOT turn on the hotspot using the built-in menu in TouchWiz/Android.
To turn OFF the Wifi Tethering:
2a) Pull the notification menu down (swipe down from the top of the phone), tap on 'Tethering or hotspot active' under the 'Ongoing' section, turn it off.
OR
2b) Settings > Connections > More networks > Tethering and portable hotspot > turn it off
OR
2c) ES File Explorer > menu > Net Manager > tap the Exit button at the top (under the details for your hotspot).
NOTES:
* For turning off the Wifi Tethering, I've found that the fastest way is option 2a.
* For AT&T phones: "Use foxfi and enable the proxy service it will mask your tethering." - dave5777
Gorgenapper said:
I've been using the phone for a few days, and I'm not going back to my iPhone 4S now. Too many goodies on the GS4 Active and Android. I've resolved most of the issues I've been running into by myself (disabling some bloatware, installing stuff from the Google Play store, replacing the ****ty stock camera app with Camera Zoom Fx, etc).
So I tried to use internet tethering (mobile hotspot), and it is disabled. It tells me that Mobile data is not available or invalid SIM. The phone is an AT&T phone (I537), and I'm using it on the Fido network here in Canada on the 3G APN (not the LTE APN). Fido has internet tethering free by default (as it should be), I used it on my iPhone 4S, so I'm guessing that it is my phone which has the feature disabled even though my provider and data plan support it.
Do you think I could use the same trick that the regular GS4 guys are using to enable it, by changing some stuff in the TetheringProvision.apk file? I read it in the link below:
http://galaxys4root.com/galaxy-s4-tutorials/how-to-wifi-tether-att-galaxy-s4-sgh-i337/
Or is there a specific way that we can use to enable this feature? Thanks...
Click to expand...
Click to collapse
Just follow this. It worked for me.
http://forum.xda-developers.com/showthread.php?p=44931952#post44931952
bluesphere0 said:
Just follow this. It worked for me.
http://forum.xda-developers.com/showthread.php?p=44931952#post44931952
Click to expand...
Click to collapse
Hi, thanks for the tip! I figured it out after a while, here is a full write up based on your directions and on bada bing's directions. Step by step, detailed, etc.
Overview of steps:
* Root
* Quarantine 'TetheringProvision' to disable the software lock on hotspot
* Use ES File Explorer to configure and turn on the hotspot
* Root
1) Start by rooting the device: http://forum.xda-developers.com/showthread.php?t=2347793
NOTE: For step #3 in that thread, after the apk installs, you will eventually be brought to a completion menu with 'Done' and 'Open' options. Choose the 'Open' option and it will tell you that you should have root access now. If you accidentally tap 'Done', you can just reinstall the apk again.
2) Get SuperSU on the Play Store. Open it, update the binaries, etc. Your device should be fully rooted at this point. You can check this by downloading Root Checker on the Play Store, but this is unnecessary.
* Quarantine 'TetheringProvision' to disable the software lock on hotspot
3) Enable USB Debugging (Settings > More > About Device > tap the Build Number about 10 times > back button > Developer options > check USB debugging). This is required by App Quarantine in order to quarantine files.
4) Get App Quarantine from the Play Store, tap the wrench icon at the top right, uncheck 'Hide system services', hit the back button, then tap on 'TetheringProvision' and tap on the lock icon at the top right. If successful, it will lock it up in the 'Quarantine' tab at the right. Check to make sure that it is in there. This 'freezes' the file which is responsible for locking down the hotspot functionality.
* Use ES File Explorer to configure and turn on the hotspot
5) Get ES File Explorer from the Play Store. Tap the hard key for menu, scroll down and tap on Net Manager. Tap on Settings at the bottom, select 'Use the system AP setting', enter an SSID (recommended to be short with no spaces, like 'MyName_GS4_Active'), and a password. Tap on OK. Tap on the back button. Tap on 'Create a hotspot network'. It will say 'Establishing Network...turning on', followed by 'Now you are using AP, SSID is...', AP password:, and an 'Exit' button. It may say 'Unfortunately, Settings has stopped' after this, but IGNORE it. Your hotspot is still active - look at the top left of the phone, you will see a wifi symbol in a blue icon, this is your indication that your hotspot is working.
Notes:
To turn ON the Wifi Tethering:
1) ES File Explorer > menu > Net Manager > Create a hotspot network.
You CANNOT turn on the hotspot using the built-in menu.
To turn OFF the Wifi Tethering:
2a) Pull the notification menu down (swipe down from the top of the phone), tap on 'Tethering or hotspot active' under the 'Ongoing' section, turn it off.
OR
2b) Settings > Connections > More networks > Tethering and portable hotspot > turn it off
OR
2c) ES File Explorer > menu > Net Manager > tap the Exit button at the top (under the details for your hotspot).
Personally for turning off the Wifi Tethering, I've found that the fastest way is option 2a.
Anyone try this with AT&T yet?
fegarciaii said:
Anyone try this with AT&T yet?
Click to expand...
Click to collapse
Yes, use foxfi and enable the proxy service it will mask your tethering.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
You can turn on wifi tether in android just like normal once doing the tetherprovision hack. It will popup with the you must activate message like normal, but the hotspot still activates and works fine. This eliminates the need to us es file explorer to turn it on.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
---------- Post added at 10:50 AM ---------- Previous post was at 10:50 AM ----------
Fegarciaii, ive been using on att for weeks with no issues.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
dave5777 said:
Yes, use foxfi and enable the proxy service it will mask your tethering.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks! I'll give that a try. Seems like I tried using foxfi, but ran into a wall. Didn't try to enable the proxy service though...
Just wanted to mention something here in case there are others out there as dumb as me
See, I have bounced back and forth between carriers over the years, and have become so accustomed to their greedy "you must pay us extra for tethering" crap, that one of the first things I do with all my new phones is figure out how to beat any tethering restrictions on it. Same for my new i537. Came here and found the right threads, starting playing with FoxFi and removing the provisioning apk's, etc.
Just today I figured out that tethering is included, free, with my plan anyway.
Doh!
Been fighting a non-existing restriction all this time... I didn't realize that AT&T now *lets* me tether up to the limits of my plan without any additional charges. So if you are reading this trying to figure out how to tether for free, you might want to check if you need to even bother first...
IMissPalmOS said:
Just wanted to mention something here in case there are others out there as dumb as me
See, I have bounced back and forth between carriers over the years, and have become so accustomed to their greedy "you must pay us extra for tethering" crap, that one of the first things I do with all my new phones is figure out how to beat any tethering restrictions on it. Same for my new i537. Came here and found the right threads, starting playing with FoxFi and removing the provisioning apk's, etc.
Just today I figured out that tethering is included, free, with my plan anyway.
Doh!
Been fighting a non-existing restriction all this time... I didn't realize that AT&T now *lets* me tether up to the limits of my plan without any additional charges. So if you are reading this trying to figure out how to tether for free, you might want to check if you need to even bother first...
Click to expand...
Click to collapse
Good idea.... I'm going to check my plan. I'm just so used to AT&T screwing me ... just switched from years with the iPhone and always had mine jailbroken and used tethering everytime I was on a business trip.
Thanks
Sent from my SAMSUNG-SGH-I537 using Tapatalk 2
IMissPalmOS said:
Been fighting a non-existing restriction all this time... I didn't realize that AT&T now *lets* me tether up to the limits of my plan without any additional charges. So if you are reading this trying to figure out how to tether for free, you might want to check if you need to even bother first...
Click to expand...
Click to collapse
If you're on a different carrier with an unlocked Active this tutorial helps out a lot. I got mine factory unlocked from ATT but neither wifi nor bluetooth tether works without doing all the above I have the wifi working now but bluetooth tethering, while now visible with a checkmark, still doesn't work at all.
I can -sort of- understand why cell companies lock their software down (money, fear of losing customers, etc...) but I don't particularly care for it when I buy the phone outright and should be able to use it any way I wish. They'll unlock it fine but I'm SOL on other highly sought after options like this. Sure I can download an app to bluetooth tether, but why should I when it's an option in the settings?
fixfi workaround s4 active
When you activate tethering and it comes up telling you to call 611, instead of clicking OK just hit the home button to minimize foxfi.
Rob
Avail211 said:
If you're on a different carrier with an unlocked Active this tutorial helps out a lot. I got mine factory unlocked from ATT but neither wifi nor bluetooth tether works without doing all the above I have the wifi working now but bluetooth tethering, while now visible with a checkmark, still doesn't work at all.
I can -sort of- understand why cell companies lock their software down (money, fear of losing customers, etc...) but I don't particularly care for it when I buy the phone outright and should be able to use it any way I wish. They'll unlock it fine but I'm SOL on other highly sought after options like this. Sure I can download an app to bluetooth tether, but why should I when it's an option in the settings?
Click to expand...
Click to collapse
rgwicks98 said:
When you activate tethering and it comes up telling you to call 611, instead of clicking OK just hit the home button to minimize foxfi.
Rob
Click to expand...
Click to collapse
I know I can install foxfi as a workaround, but I shouldn't have to.
FWIW, I don't use ES File Explorer due to the root access issues, I just use the ATT hotspot app for wifi tether and it works fine (after freezing the TetherProvisioning of course) It works for me just fine. I also have Wanam Xposed installed and checked the disable tether provisioning, not sure if it makes any difference though.
Avail211 said:
I know I can install foxfi as a workaround, but I shouldn't have to.
FWIW, I don't use ES File Explorer due to the root access issues, I just use the ATT hotspot app for wifi tether and it works fine (after freezing the TetherProvisioning of course) It works for me just fine. I also have Wanam Xposed installed and checked the disable tether provisioning, not sure if it makes any difference though.
Click to expand...
Click to collapse
Is "TetherProvisioning" the only one you froze OR uninstalled?
I can't never use the built-in tethering, I kept getting on "Unfortunately, Settings has stopped". Tried this with FoxFi, Wifi Tether and a host of other tethering apps..
The app, say Wifi Tether and FoxFi, will have the notifican saying "tethering running" or something like that, but there is not blue icon that usually shows up when tethering is ACTUALLY active. Tried to connect from my MacBook and Galaxy Note 8.0 - yep - no tethering active.
My S4 Active is rooted, stock ROM.
---------- Post added at 10:24 AM ---------- Previous post was at 10:22 AM ----------
To OP:
For my ES Explorer, the "Create a network" option is ALWAYS greyed out (not clickable). Is there any specific setup you have to do?
lanwarrior said:
Is "TetherProvisioning" the only one you froze OR uninstalled?
I can't never use the built-in tethering, I kept getting on "Unfortunately, Settings has stopped". Tried this with FoxFi, Wifi Tether and a host of other tethering apps..
The app, say Wifi Tether and FoxFi, will have the notifican saying "tethering running" or something like that, but there is not blue icon that usually shows up when tethering is ACTUALLY active. Tried to connect from my MacBook and Galaxy Note 8.0 - yep - no tethering active.
My S4 Active is rooted, stock ROM.
---------- Post added at 10:24 AM ---------- Previous post was at 10:22 AM ----------
To OP:
For my ES Explorer, the "Create a network" option is ALWAYS greyed out (not clickable). Is there any specific setup you have to do?
Click to expand...
Click to collapse
I couldn't get ES File Explorer to work at all, not even view root files (I definitely have it rooted as well, a lot of people have issues with ES for some reason on the Active) I have Wanam Xposed installed with the tethering provision disable box checked, TetherProvision frozen, and I activate the wifi hotspot thru the ATT Hotspot app, not thru settings. It'll sometimes tell me it's stopped, but the wifi hotspot will be active and I can connect with my Nexus or MBP just fine. Bluetooth tether does NOT work though for some reason.
Avail211 said:
I couldn't get ES File Explorer to work at all, not even view root files (I definitely have it rooted as well, a lot of people have issues with ES for some reason on the Active) I have Wanam Xposed installed with the tethering provision disable box checked, TetherProvision frozen, and I activate the wifi hotspot thru the ATT Hotspot app, not thru settings. It'll sometimes tell me it's stopped, but the wifi hotspot will be active and I can connect with my Nexus or MBP just fine. Bluetooth tether does NOT work though for some reason.
Click to expand...
Click to collapse
Yes, I did NOT start tethering through settings, just from the 3rd party app, but the error still happened.
lanwarrior said:
Yes, I did NOT start tethering through settings, just from the 3rd party app, but the error still happened.
Click to expand...
Click to collapse
Does wifi tether still work though? Mine does even with the error.
EDIT: NVM, I re-read your post stating it doesn't work at all. Idk then, mine works fine after freezing the tetherprovision and enabling wifi tether with wanam xposed.
Avail211 said:
Does wifi tether still work though? Mine does even with the error.
EDIT: NVM, I re-read your post stating it doesn't work at all. Idk then, mine works fine after freezing the tetherprovision and enabling wifi tether with wanam xposed.
Click to expand...
Click to collapse
So I found out that if I start the tether (3rd party app or built in) the first time after every reboot, the phone hangs, the error pops up and tethering does NOT work.
The 2nd time I started, then it works.
The problem is that the hang took about 10 - 15 seconds. With the 2nd tried, that's a total of 20 - 30 seconds. So I have to wait...
I guess I got used to my old Note where tethering is almost instant.
I don't think you have to get a program to freeze the tether files , just rename them ,, I added a 2 to the name of the apk and odex file . then I fallowed the rest of the directions , and it works great
I have a tethering app I had on my note , installed it and it works for turning on and off , no need to go into the es files to turn it on ..
app is SVTP WIFI HOTSPOT
Check wifi is OFF
lanwarrior said:
Is "TetherProvisioning" the only one you froze OR uninstalled?
I can't never use the built-in tethering, I kept getting on "Unfortunately, Settings has stopped". Tried this with FoxFi, Wifi Tether and a host of other tethering apps..
The app, say Wifi Tether and FoxFi, will have the notifican saying "tethering running" or something like that, but there is not blue icon that usually shows up when tethering is ACTUALLY active. Tried to connect from my MacBook and Galaxy Note 8.0 - yep - no tethering active.
My S4 Active is rooted, stock ROM.
---------- Post added at 10:24 AM ---------- Previous post was at 10:22 AM ----------
To OP:
For my ES Explorer, the "Create a network" option is ALWAYS greyed out (not clickable). Is there any specific setup you have to do?
Click to expand...
Click to collapse
It will be grayed out in ES EXPLORER if you have your WIFI turned on. You have to turn off the WIFI to activate the HOTSPOT. It cannot both Receive WIFI and be a HOTSPOT at the same time. I tried so many hotspot apps with the active and only ES Explorer worked. Note... you do get a settings stopped warning but it really is working...
I also suggest NOT using the random SSID in ES Explorer, rather set up a system SSID... Is explained in the full step by step post...
This fix is more for AT&T phones running on OTHER networks... in my case, T-Mobile.
---------- Post added at 06:43 PM ---------- Previous post was at 06:35 PM ----------
h2447intx said:
I don't think you have to get a program to freeze the tether files , just rename them ,, I added a 2 to the name of the apk and odex file . then I fallowed the rest of the directions , and it works great
I have a tethering app I had on my note , installed it and it works for turning on and off , no need to go into the es files to turn it on ..
app is SVTP WIFI HOTSPOT
Click to expand...
Click to collapse
You do not need a program but it is easier to remember and undo all the changes with the program. Just uncheck a box verses remembering all the renamed files a few months after you did it... I am OLD.. I forget things.
For some reason, on the ACTIVE, the stock android tethering app still is not functional even after disabling the tethering provision app. At&t did something extra to cripple the ACTIVE.
Again, this is for using the ACTIVE on other than At&t... or at least that was the original tethering problem I was working to fix.

Disable bluetooth MAP?

My X is paired to my 2013 F-150 via SYNC and it automatically adds the voice, media and message features upon connecting. However, every time I get a text, SYNC stops everything to tell me I have a new text message, and it's annoying. You can turn MAP off temporarily by manually disabling it while the phone is paired, but once it re-pairs with SYNC, it automatically activates MAP again. I do use the voice and media though.
My question is this... is there any way to permanently disable the MAP feature on the X? I don't use it and never will. I always check my phone when a new message arrives or wait until I'm at a stop. I just want to be able to be able to remove the MAP feature.
triton302 said:
My X is paired to my 2013 F-150 via SYNC and it automatically adds the voice, media and message features upon connecting. However, every time I get a text, SYNC stops everything to tell me I have a new text message, and it's annoying. You can turn MAP off temporarily by manually disabling it while the phone is paired, but once it re-pairs with SYNC, it automatically activates MAP again. I do use the voice and media though.
My question is this... is there any way to permanently disable the MAP feature on the X? I don't use it and never will. I always check my phone when a new message arrives or wait until I'm at a stop. I just want to be able to be able to remove the MAP feature.
Click to expand...
Click to collapse
You can probably unpair (from both the phone and sync) and then repair and when you repair just deny the MAP access request.
Also, you should be able to turn off new message download in Sync
triton302 said:
My X is paired to my 2013 F-150 via SYNC and it automatically adds the voice, media and message features upon connecting. However, every time I get a text, SYNC stops everything to tell me I have a new text message, and it's annoying. You can turn MAP off temporarily by manually disabling it while the phone is paired, but once it re-pairs with SYNC, it automatically activates MAP again. I do use the voice and media though.
My question is this... is there any way to permanently disable the MAP feature on the X? I don't use it and never will. I always check my phone when a new message arrives or wait until I'm at a stop. I just want to be able to be able to remove the MAP feature.
Click to expand...
Click to collapse
Did you ever find a solution for this? I just got a '14 Raptor and it does the same damned thing. I've deleted the phone pairing and repaired and deny access when repairing but it still automatically connects to all 3 protocols when I get in the truck. My phone is actually an LG G3 but it seems to be an android problem and not a specific phone problem.
boosting1bar said:
Did you ever find a solution for this? I just got a '14 Raptor and it does the same damned thing. I've deleted the phone pairing and repaired and deny access when repairing but it still automatically connects to all 3 protocols when I get in the truck. My phone is actually an LG G3 but it seems to be an android problem and not a specific phone problem.
Click to expand...
Click to collapse
Nope. I also got a '14 Focus ST and the bluetooth "feature" is even worse on it. Since I have the full touchscreen, it will now display the notification that I have a text, and who it's from. Again, you can temporarily disable it on the phone but not permanently.
triton302 said:
Nope. I also got a '14 Focus ST and the bluetooth "feature" is even worse on it. Since I have the full touchscreen, it will now display the notification that I have a text, and who it's from. Again, you can temporarily disable it on the phone but not permanently.
Click to expand...
Click to collapse
Yeah that's exactly what I'm getting in my 14 Raptor. Terrible, I guess I have to disable it every time I get in the car now.
triton302 said:
Nope. I also got a '14 Focus ST and the bluetooth "feature" is even worse on it. Since I have the full touchscreen, it will now display the notification that I have a text, and who it's from. Again, you can temporarily disable it on the phone but not permanently.
Click to expand...
Click to collapse
Do you guys have root? if so maybe you can try something. but keep in mind I have not tried this myself and also I could be completely wrong.
Anyway, I noticed in my moto x build.prop file (that sets the phone settings on boot) that one of the lines seems to disable Bluetooth SAP on boot. The line is
ro.qualcomm.bluetooth.sap = false
if that can turn off SAP maybe
ro.qualcomm.bluetooth.map = false
can turn off MAP on boot.
Keep in mind editing build.prop the wrong way can give you boot up problems. Backup the file, and also keep track of and set the appropriate permissions for the file.
In fact, it's probably better before editing build.prop to try the setting on the fly. In a terminal emulator with SU enabled try the line
setprop ro.qualcomm.bluetooth.map false
then check that with getprop and with your car.
this is safer if you have any problems you can just reboot. if it works you can proceed to build.prop
dtg7 said:
Do you guys have root? if so maybe you can try something. but keep in mind I have not tried this myself and also I could be completely wrong.
Anyway, I noticed in my moto x build.prop file (that sets the phone settings on boot) that one of the lines seems to disable Bluetooth SAP on boot. The line is
ro.qualcomm.bluetooth.sap = false
if that can turn off SAP maybe
ro.qualcomm.bluetooth.map = false
can turn off MAP on boot.
Keep in mind editing build.prop the wrong way can give you boot up problems. Backup the file, and also keep track of and set the appropriate permissions for the file.
In fact, it's probably better before editing build.prop to try the setting on the fly. In a terminal emulator with SU enabled try the line
setprop ro.qualcomm.bluetooth.map false
then check that with getprop and with your car.
this is safer if you have any problems you can just reboot. if it works you can proceed to build.prop
Click to expand...
Click to collapse
Great idea, however I just tried it with no avail.
I just thought of something as well... my fiance has a '13 Focus SE with the base stereo, and she has the same model phone as me (VZW X Dev). Her SYNC doesn't alert her to new messages, but my truck with the same SYNC setup did, but I figured my truck had a more recent version of SYNC. I dunno, all I know is it's annoying as hell and I'd like to find a more permanent solution. Especially since I'm contemplating on buying the Droid Turbo in the future and I'm sure it will do the same thing.
triton302 said:
Great idea, however I just tried it with no avail.
Click to expand...
Click to collapse
That sucks... Just to clarify I assume you tried this with a terminal emulator. did you remember to give it root before running the setprop command? i.e. type su and enter. without root setprop will appear to go through but won't actually set anything. And if it's set properly, getprop ro.qualcomm.bluetooth.map should return false like it does for SAP. otherwise it will return empty.
Another thing that might or might not make a difference, was Bluetooth on when you tried this, if so try it with Bluetooth off.
As for the difference between the two SYNCs my guess is you're right the version difference could be affecting something. A quick Google search suggests some versions of SYNC have a setting for MAP. in SYNC menu check System Settings -> Advanced -> MAP Profile
dtg7 said:
That sucks... Just to clarify I assume you tried this with a terminal emulator. did you remember to give it root before running the setprop command? i.e. type su and enter. without root setprop will appear to go through but won't actually set anything. And if it's set properly, getprop ro.qualcomm.bluetooth.map should return false like it does for SAP. otherwise it will return empty.
Another thing that might or might not make a difference, was Bluetooth on when you tried this, if so try it with Bluetooth off.
As for the difference between the two SYNCs my guess is you're right the version difference could be affecting something. A quick Google search suggests some versions of SYNC have a setting for MAP. in SYNC menu check System Settings -> Advanced -> MAP Profile
Click to expand...
Click to collapse
The newer SYNC version doesn't have that MAP option, that was the first thing I found when googling as well. (and for the record I don't have a moto, I'm using an LG G3 and found this thread while searching for a solution). Unfortunately my build.prop doesn't have those lines in it. Not sure if I could just add the MAP entry or not, that's above my knowledge base
boosting1bar said:
The newer SYNC version doesn't have that MAP option, that was the first thing I found when googling as well. (and for the record I don't have a moto, I'm using an LG G3 and found this thread while searching for a solution). Unfortunately my build.prop doesn't have those lines in it. Not sure if I could just add the MAP entry or not, that's above my knowledge base
Click to expand...
Click to collapse
well without putting in commands manually I see two things you guys can try. the first doesn't need root while the second one does.
1) turn on Bluetooth on your phones, then go to Settings -> Apps -> Running -> Bluetooth Share then just Stop the Map service. This method will stick as long as you don't turn off Bluetooth and start it again, and as long as you don't restart the phone. if you do either you'll have to do the stopping again.
2) this requires that your phone be rooted, but on the plus side it might be more permanent. There's a nifty app in the play store made by some benevolent developer that claims to disable any service started by any app. appropriately enough the app is called Disable Service. You open the app, slide over to the System Apps section, find Bluetooth Share and click it, then just uncheck the Maps service box. So simple, but won't work without root. Try it with Bluetooth off and if that doesn't work reset it then try it with Bluetooth on. But word of caution you don't want to go messing around disabling other things unless you're sure of what you're doing. disabling the wrong thing will cause you problems.
https://play.google.com/store/apps/details?id=cn.wq.disableservice
good luck.
dtg7 said:
well without putting in commands manually I see two things you guys can try. the first doesn't need root while the second one does.
1) turn on Bluetooth on your phones, then go to Settings -> Apps -> Running -> Bluetooth Share then just Stop the Map service. This method will stick as long as you don't turn off Bluetooth and start it again, and as long as you don't restart the phone. if you do either you'll have to do the stopping again.
2) this requires that your phone be rooted, but on the plus side it might be more permanent. There's a nifty app in the play store made by some benevolent developer that claims to disable any service started by any app. appropriately enough the app is called Disable Service. You open the app, slide over to the System Apps section, find Bluetooth Share and click it, then just uncheck the Maps service box. So simple, but won't work without root. Try it with Bluetooth off and if that doesn't work reset it then try it with Bluetooth on. But word of caution you don't want to go messing around disabling other things unless you're sure of what you're doing. disabling the wrong thing will cause you problems.
good luck.
Click to expand...
Click to collapse
Thanks so much! Option 2 is exactly what I've been looking for! Option 1 doesn't work for me because I use Trigger and have conditional BT on/off and that would just recreate the same problem lol.
Just tried option 2... If any of those services are unchecked, Bluetooth itself turns off automatically and won't turn back on until that service is restored.
triton302 said:
Just tried option 2... If any of those services are unchecked, Bluetooth itself turns off automatically and won't turn back on until that service is restored.
Click to expand...
Click to collapse
Yep same here, tried it on my way home yesterday and the disable service app completely disables bluetooth if you disable MAP.
boosting1bar said:
Yep same here, tried it on my way home yesterday and the disable service app completely disables bluetooth if you disable MAP.
Click to expand...
Click to collapse
Wow no breaks...but not quite out of ideas yet. a few more to spitball, going from simple to more complex:
a) we've established there's no option to disable MAP from within SYNC under System Settings. What about under Phone Settings? Indications are there should be an option there to turn off Message Notification. If it's there set it to OFF. frankly I'd expect there to be such a setting somewhere in there.
b) reaching a bit here, but in Disable Service app I notice there's another system app that has Bluetooth service settings. the app's name is org.codeaurora.bluetooth (Apparently Code Aurora is the Qualcomm Linux kernel). No idea if this will work where the other failed but won't hurt to try. the service says BluetoothMasService but if you check the full name it is map (maybe service instead of profile).
c) this one brings out the big guns. not only do you need root, but you also need Xposed installed. if you already have Xposed then it would be quick to try. if not, just read up on it. anyway, with Xposed installed you need the AppOpsXposed module. when you have that up and running you open the App Ops screen of the Bluetooth Share app (a few ways to do that, doesn't matter how). in that screen you turn off all of Bluetooth Share's access to SMS. Basically you disable Bluetooth from interacting with Messaging. you revoke the permissions. Bluetooth will still work unaware that it can't access messages, and I figure if it can't access messages it damn well can't send them to the car.
There's another module that can do this more thoroughly, but App Ops is less scary/more user friendly.
that's it. personally I still prefer my original idea of figuring out how to do it manually thru setprop and build.prop, but if that's not an option then try these.
Roger, I'm off work today so I'll try these out here shortly.
EDIT: From what I recall, if you have a recent version of MFT, there are no options whatsoever for MAP, in phone or system settings. I'll double check.
EDITING EDIT: #2 doesn't work.
dtg7 said:
Wow no breaks...but not quite out of ideas yet. a few more to spitball, going from simple to more complex:
a) we've established there's no option to disable MAP from within SYNC under System Settings. What about under Phone Settings? Indications are there should be an option there to turn off Message Notification. If it's there set it to OFF. frankly I'd expect there to be such a setting somewhere in there.
b) reaching a bit here, but in Disable Service app I notice there's another system app that has Bluetooth service settings. the app's name is org.codeaurora.bluetooth (Apparently Code Aurora is the Qualcomm Linux kernel). No idea if this will work where the other failed but won't hurt to try. the service says BluetoothMasService but if you check the full name it is map (maybe service instead of protocol).
c) this one brings out the big guns. not only do you need root, but you also need Xposed installed. if you already have Xposed then it would be quick to try. if not, just read up on it. anyway, with Xposed installed you need the AppOpsXposed module. when you have that up and running you open the App Ops screen of the Bluetooth Share app (a few ways to do that, doesn't matter how). in that screen you turn off all of Bluetooth Share's access to SMS. Basically you disable Bluetooth from interacting with Messaging. you revoke the permissions. Bluetooth will still work unaware that it can't access messages, and I figure if it can't access messages it damn well can't send them to the car.
There's another module that can do this more thoroughly, but App Ops is less scary/more user friendly.
that's it. personally I still prefer my original idea of figuring out how to do it manually thru setprop and build.prop, but if that's not an option then try these.
Click to expand...
Click to collapse
I think we have a winner! #3 works perfectly.
I tested it with the phone unlocked and locked, rebooting the phone, toggling bluetooth on and off, turning the car on and off... seems to work every time. As long as you turn off just the SMS/MMS options, you can still have it send and receive calls and allow the device to remain unlocked while connected.
Ahhhh...... Success feels good...
Xposed is pretty amazing... It gives us a fighting chance lol.
if only they'd installed Xposed on Skynet things might have turned out differently...
dtg7 said:
c) this one brings out the big guns. not only do you need root, but you also need Xposed installed. if you already have Xposed then it would be quick to try. if not, just read up on it. anyway, with Xposed installed you need the AppOpsXposed module. when you have that up and running you open the App Ops screen of the Bluetooth Share app (a few ways to do that, doesn't matter how). in that screen you turn off all of Bluetooth Share's access to SMS. Basically you disable Bluetooth from interacting with Messaging. you revoke the permissions. Bluetooth will still work unaware that it can't access messages, and I figure if it can't access messages it damn well can't send them to the car.
There's another module that can do this more thoroughly, but App Ops is less scary/more user friendly.
Click to expand...
Click to collapse
Awesome, worked here as well!! I'd looked through xposed and didn't see any modules that would do what we were after, completely forgot about AppOps. Outstanding work and thanks so much for the help!
You're welcome!
boosting1bar said:
Awesome, worked here as well!! I'd looked through xposed and didn't see any modules that would do what we were after, completely forgot about AppOps. Outstanding work and thanks so much for the help!
Click to expand...
Click to collapse
How did you get this yo work? I am on a cm12 Rom also with the same issue.
Did all the above, but anytime I start the Bluetooth afterwards, it just reactivates the "Read / Write sms messages permission all over again nd im back to square 1.
Sorry to bump an old thread. But its still yhe same issue I am dealing with.

Can I Safely Disable IPSec Service?

I'm still seeing Android System using the lion's share of my battery life and I've started looking at the services running within it. The IPSec service is always near the top of the Android System pile and I was wondering if it's safe to disable it.
Some light Googling is turning up the service is related to VPN networking but there's not much more available (at least at an entry level of understanding). This link provides a decent understanding. I don't use remote access or corporate VPNs. My only real question is if I disable it using the App manager, are there routine functions that might be disabled? Should I be weary about Samsung Pay?
Thanks!
Finaly have you find a solution ? i'm reseaching on google and i can't find how disable ipsec on android , if you have know how do this , please let me know
Root your phone to enable super user abilities, and search for ipsec in rom manager, then disable it.
Realizing Im going back in time.. Or if you have a device like the Samsung S6 Active, an AT&T branded, close to perfect device which I have yet to find a way to Unlock the bootloader and root ..? Try AdHell-2. The link(s) are here at XDA. You must... 1.) Create a Samsung Account, 2.) Apply for a Developers Account SEAP, 3.) Request a License Key, 4.) Toggle On Unknown Sources in Settings/Lockscreen & Security/Unknown Sources, 5.) Install the AdHell-2 .apk, 6.) Then Activate the App by Copying your License Key. * This is a great App which not only serves as a highly-efficient Ad Block, but also allows for the Disabling of System and User Apps. Anyone reading this know of a way to root the S6 Active?

Samsung services dialling home to China (360.cn and 360safe.com) after Pie upgrade

Having ran NetGuard in logging mode for a few days now I've noticed that many of Samsung's in-built services are contacting web services associated at multiple DNS subdomains under:
- *.360.cn
- *.cloud.360safe.com
A lot of them on unsecured HTTP port 80 (some go via HTTPS port 443).
Services I've observed this behaviour so far are:
- Samsung ApexService
- ANT+ HAL Service
- Application installer (com.sec.android.preloadinstaller)
- Assistant Menu
- AirCommandManager (com.samsung.android.aircommandmanager)
- Plus too many other default services to list (most of which cannot be disabled)
Phone's running on stock unbranded SM-N960F build number PPR1.180610.011.N960FXXU2CSA2.
I've scanned the phone using bundled Device Care's McAfee security scan with no findings.
Has anyone else observed this behaviour?
sengork said:
Having ran NetGuard in logging mode for a few days now I've noticed that many of Samsung's in-built services are contacting web services associated at multiple DNS subdomains under:
- *.360.cn
- *.cloud.360safe.com
A lot of them on unsecured HTTP port 80 (some go via HTTPS port 443).
Services I've observed this behaviour so far are:
- Samsung ApexService
- ANT+ HAL Service
- Application installer (com.sec.android.preloadinstaller)
- Assistant Menu
- AirCommandManager (com.samsung.android.aircommandmanager)
- Plus too many other default services to list (most of which cannot be disabled)
Phone's running on stock unbranded SM-N960F build number PPR1.180610.011.N960FXXU2CSA2.
I've scanned the phone using bundled Device Care's McAfee security scan with no findings.
Has anyone else observed this behaviour?
Click to expand...
Click to collapse
I haven't looked at this as closely as you have,but,I'm guessing it's all tied-in from the Device Maintenance section of the phone.
The name of the company Samsung is currently in bed with is QIHOO:
https://en.wikipedia.org/wiki/Qihoo_360
https://seekingalpha.com/article/4165136-cheetah-mobile-lost-samsung-relevant-risks
Remember/heard of Cheetah Mobile (of Clean Master infamy) ?
https://www.prnewswire.com/news-rel...mobile-security-and-innovation-300043298.html
Well,that's who used to be in partnership w/Samsung & the Device Maintenance aka built-in Clean Master to most,if not all Samsung mobile products.
Fast-Forward to present day & we still have the crapware on our phones,likely scraping info & selling it to anyone interested.
Now,it's just with another company,presumably one with friendlier terms for Samsung.
As you've probably noticed,you can't fully disengage/disable/deny all permissions here,less root (or ADB disabling/package disabler apps).
At least you have a phone that's rootable & can cruise the ROM scene for one that leaves this crap off the phone.
If root isn't an option:
Set up your phone & apps,fine-tune as you like for battery optimization on a per app basis/permissions/etc....
Then,either via ADB or a package disabler,disable the apps responsible for the crapware,especially the ones related to Device Maintenance.
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Follow the link in the OP to the S9/S9+ forum/thread,it gives a better idea of what each .apk actually is/ties into.
Here's the app I use to disable crapware/things I don't use:
https://play.google.com/store/apps/details?id=com.wakasoftware.appfreezer
As to which apps to disable,the S9/S9+ thread,while not an exact match,should give you info on what to disable to stop the phone from pinging the 360 mothership & hopefully,not having any ill effects on the apps you want to keep on-board.
If you want a better idea of how each app is interconnected throughout the phone,use these two apps to take a look:
https://play.google.com/store/apps/details?id=com.ubqsoft.sec01
SD Maid (Pro):
https://play.google.com/store/apps/details?id=eu.thedarken.sdm&hl=en_US
(See the App Control & file manager sections of SD Maid for detailed app info).
Anyhoo,back to curbing the nonsense:
Whichever method you use to disable,should you choose to do so,start with this one:
com.samsung.android.lool (Device Maintenance).
This will make the entire Device Maintenance section inaccessible as well.
That is why I suggest disabling vs outright uninstalling (which necessitates a factory reset to get it back).
You may need to access Device Maintenance for whatever reason from time to time,hence the recommendation for disabling vs uninstalling.
Continue monitoring for a day or so & see if the pinging to the Mothership subsides,or hopefully puts a full-stop to it.
Please keep us updated on what,if any actions you take w/the results. :good:
Excellent overview, it's quite an eye opener thanks for the info.
I've disabled and force-stopped "com.samsung.android.lool" (amongst other junkware) and so far NetGuard hasn't shown a single network log entry to any of the 360 domains. I've uninstalled all 4 Facebook packages. Continuing to monitor this closely. My thought is that I can re-enable "com.samsung.android.lool" from time to time whenever maintenance is needed and then disable it again. Even better Adhell3 might be useful for blocking "com.samsung.android.lool" network attempts whilst retaining it for device management purposes however I haven't tried this yet.
For reference, here is my current list of disabled packages:
Code:
package:com.monotype.android.font.rosemary
package:com.samsung.android.app.ledcoverdream
package:com.sec.android.widgetapp.samsungapps
package:com.samsung.android.app.galaxyfinder
package:com.samsung.svoice.sync
package:com.cnn.mobile.android.phone.edgepanel
package:com.samsung.android.easysetup
package:com.samsung.android.provider.stickerprovider
package:com.samsung.android.app.sbrowseredge
package:com.samsung.android.rubin.app
package:com.sec.android.cover.ledcover
package:com.samsung.faceservice
package:com.monotype.android.font.foundation
package:com.sec.android.widgetapp.easymodecontactswidget
package:com.samsung.android.app.settings.bixby
package:com.sec.android.app.billing
package:com.samsung.android.app.selfmotionpanoramaviewer
package:com.samsung.android.game.gamehome
package:com.samsung.daydream.customization
package:com.sec.enterprise.knox.attestation
package:com.samsung.systemui.bixby2
package:com.dsi.ant.service.socket
package:com.microsoft.skydrive
package:com.samsung.SMT
package:com.samsung.android.drivelink.stub
package:com.android.hotwordenrollment.xgoogle
package:com.samsung.android.sm.devicesecurity
package:com.dsi.ant.sample.acquirechannels
package:com.samsung.android.aircommandmanager
package:com.samsung.android.bixby.service
package:com.samsung.android.smartface
package:com.android.egg
package:com.samsung.android.emojiupdater
package:com.samsung.android.bixby.agent
package:com.android.printspooler
package:com.android.hotwordenrollment.okgoogle
package:com.samsung.android.hmt.vrsvc
package:com.samsung.storyservice
package:com.android.dreams.basic
package:com.android.bips
package:com.samsung.android.game.gametools
package:com.samsung.android.app.simplesharing
package:com.samsung.android.service.peoplestripe
package:com.samsung.android.da.daagent
package:com.dsi.ant.plugins.antplus
package:com.samsung.android.app.taskedge
package:com.google.android.webview
package:com.samsung.android.app.mirrorlink
package:com.dsi.ant.server
package:com.samsung.android.allshare.service.fileshare
package:com.samsung.android.universalswitch
package:com.sec.android.app.apex
package:flipboard.boxer.app
package:com.google.android.printservice.recommendation
package:com.monotype.android.font.chococooky
package:com.android.dreams.phototable
package:com.samsung.android.bixbyvision.framework
package:com.samsung.android.game.gos
package:com.android.wallpaper.livepicker
package:com.samsung.android.beaconmanager
package:com.sec.enterprise.mdm.services.simpin
package:com.samsung.android.stickercenter
package:com.samsung.android.bixby.wakeup
package:com.samsung.android.samsungpass
package:com.samsung.android.spayfw
package:com.linkedin.android
package:com.samsung.android.lool
package:com.samsung.android.knox.analytics.uploader
package:com.samsung.android.sm.policy
package:com.sec.android.emergencylauncher
package:com.samsung.android.visionintelligence
package:com.samsung.android.app.watchmanagerstub
package:com.samsung.android.svoiceime
package:com.samsung.android.mateagent
package:com.enhance.gameservice
package:com.google.vr.vrcore
package:com.hiya.star
package:com.sec.enterprise.knox.cloudmdm.smdms
package:com.samsung.android.app.appsedge
package:com.samsung.android.samsungpassautofill
package:com.monotype.android.font.cooljazz
package:com.samsung.android.allshare.service.mediashare
package:com.samsung.android.app.clipboardedge
package:com.samsung.android.app.motionpanoramaviewer
package:com.samsung.android.bio.face.service
package:com.samsung.android.bixby.agent.dummy
sengork said:
Excellent overview, it's quite an eye opener thanks for the info.
I've disabled and force-stopped "com.samsung.android.lool" (amongst other junkware) and so far NetGuard hasn't shown a single network log entry to any of the 360 domains. I've uninstalled all 4 Facebook packages. Continuing to monitor this closely. My thought is that I can re-enable "com.samsung.android.lool" from time to time whenever maintenance is needed and then disable it again. Even better Adhell3 might be useful for blocking "com.samsung.android.lool" network attempts whilst retaining it for device management purposes however I haven't tried this yet.
For reference, here is my current list of disabled packages:
Code:
package:com.monotype.android.font.rosemary
package:com.samsung.android.app.ledcoverdream
package:com.sec.android.widgetapp.samsungapps
package:com.samsung.android.app.galaxyfinder
package:com.samsung.svoice.sync
package:com.cnn.mobile.android.phone.edgepanel
package:com.samsung.android.easysetup
package:com.samsung.android.provider.stickerprovider
package:com.samsung.android.app.sbrowseredge
package:com.samsung.android.rubin.app
package:com.sec.android.cover.ledcover
package:com.samsung.faceservice
package:com.monotype.android.font.foundation
package:com.sec.android.widgetapp.easymodecontactswidget
package:com.samsung.android.app.settings.bixby
package:com.sec.android.app.billing
package:com.samsung.android.app.selfmotionpanoramaviewer
package:com.samsung.android.game.gamehome
package:com.samsung.daydream.customization
package:com.sec.enterprise.knox.attestation
package:com.samsung.systemui.bixby2
package:com.dsi.ant.service.socket
package:com.microsoft.skydrive
package:com.samsung.SMT
package:com.samsung.android.drivelink.stub
package:com.android.hotwordenrollment.xgoogle
package:com.samsung.android.sm.devicesecurity
package:com.dsi.ant.sample.acquirechannels
package:com.samsung.android.aircommandmanager
package:com.samsung.android.bixby.service
package:com.samsung.android.smartface
package:com.android.egg
package:com.samsung.android.emojiupdater
package:com.samsung.android.bixby.agent
package:com.android.printspooler
package:com.android.hotwordenrollment.okgoogle
package:com.samsung.android.hmt.vrsvc
package:com.samsung.storyservice
package:com.android.dreams.basic
package:com.android.bips
package:com.samsung.android.game.gametools
package:com.samsung.android.app.simplesharing
package:com.samsung.android.service.peoplestripe
package:com.samsung.android.da.daagent
package:com.dsi.ant.plugins.antplus
package:com.samsung.android.app.taskedge
package:com.google.android.webview
package:com.samsung.android.app.mirrorlink
package:com.dsi.ant.server
package:com.samsung.android.allshare.service.fileshare
package:com.samsung.android.universalswitch
package:com.sec.android.app.apex
package:flipboard.boxer.app
package:com.google.android.printservice.recommendation
package:com.monotype.android.font.chococooky
package:com.android.dreams.phototable
package:com.samsung.android.bixbyvision.framework
package:com.samsung.android.game.gos
package:com.android.wallpaper.livepicker
package:com.samsung.android.beaconmanager
package:com.sec.enterprise.mdm.services.simpin
package:com.samsung.android.stickercenter
package:com.samsung.android.bixby.wakeup
package:com.samsung.android.samsungpass
package:com.samsung.android.spayfw
package:com.linkedin.android
package:com.samsung.android.lool
package:com.samsung.android.knox.analytics.uploader
package:com.samsung.android.sm.policy
package:com.sec.android.emergencylauncher
package:com.samsung.android.visionintelligence
package:com.samsung.android.app.watchmanagerstub
package:com.samsung.android.svoiceime
package:com.samsung.android.mateagent
package:com.enhance.gameservice
package:com.google.vr.vrcore
package:com.hiya.star
package:com.sec.enterprise.knox.cloudmdm.smdms
package:com.samsung.android.app.appsedge
package:com.samsung.android.samsungpassautofill
package:com.monotype.android.font.cooljazz
package:com.samsung.android.allshare.service.mediashare
package:com.samsung.android.app.clipboardedge
package:com.samsung.android.app.motionpanoramaviewer
package:com.samsung.android.bio.face.service
package:com.samsung.android.bixby.agent.dummy
Click to expand...
Click to collapse
:good: THX for the update,much appreciated! :good:
I was gonna post this in a bit (just noticed it myself this afternoon,LOL) ,but,it looks like you have added the other two .apks to your disabled list:
https://forum.xda-developers.com/showpost.php?p=78103170&postcount=123
It'a a shame the mfgs aren't required to be more up-front & state ,in common use language where the print is larger than a gnat's ass, the exact nature of the .apks & even more control over the services installed on them.
KOLIOSIS said:
It'a a shame the mfgs aren't required to be more up-front & state ,in common use language where the print is larger than a gnat's ass, the exact nature of the .apks & even more control over the services installed on them.
Click to expand...
Click to collapse
The closest to a manufacturer application list I came across was:
- https://support.samsungknox.com/hc/en-us/articles/115015195728-Common-Criteria-Mode
- For example https://docs.samsungknox.com/CCMode/N960F_O.pdf
This seems to relate to computer security certification known as Common Criteria:
- https://en.wikipedia.org/wiki/Common_Criteria
So the dial home behaviour seems to have passed this security certification (or perhaps the network flows were not part of the certification process). We can only guess...
I've had to reenable the following items to get APK installs to function (either through Play Store or locally stored APKs):
Code:
com.samsung.android.sm.policy
com.samsung.android.sm.devicesecurity
https://forum.xda-developers.com/ga...val-thread-t3857508/post78744845#post78744845
Continuing to monitor with NetGuard. So far ~1hr I haven't seen the packets repeat.
sengork said:
I've had to reenable the following items to get APK installs to function (either through Play Store or locally stored APKs):
https://forum.xda-developers.com/ga...val-thread-t3857508/post78744845#post78744845
Continuing to monitor with NetGuard. So far ~1hr I haven't seen the packets repeat.
Click to expand...
Click to collapse
IIRC,something like this was mentioned in the S9/S9+ debloat thread.
I didn't mention it earlier as you hadn't reported any issues,but,glad you were able to figure it out/find the same info I'd stumbled upon.
Well after a day of usage I can say that battery life is poorer without "com.samsung.android.lool". I've enabled it again now and blocked its domains via Adhell 3:
Code:
360.cn
360safe.com
*.360.cn
*.360safe.com
Furthermore I have disabled its WiFi and Mobile network access in Adhell 3. However this block is bypassed whenever applications using Android's native VPN facility are switched on so its not absolutely fool proof. Similar blocking can be done using NetGuard itself as long as you keep it switched on and filtering continuously.
I'll keep an eye on which other domains it attempts to contact.
sengork said:
Well after a day of usage I can say that battery life is poorer without "com.samsung.android.lool". I've enabled it again now and blocked its domains via Adhell 3:
Code:
360.cn
360safe.com
*.360.cn
*.360safe.com
Furthermore I have disabled its WiFi and Mobile network access in Adhell 3. However this block is bypassed whenever applications using Android's native VPN facility are switched on so its not absolutely fool proof. Similar blocking can be done using NetGuard itself as long as you keep it switched on and filtering continuously.
I'll keep an eye on which other domains it attempts to contact.
Click to expand...
Click to collapse
How much of a difference in battery life are we talking about?
It felt to be about 20%. Is Pie without Device Maintenance expected to put applications to sleep? I am guessing sleep is the major factor here (opposed to cleaning up caches and other storage capacity functions of Device Maintenance app).
sengork said:
It felt to be about 20%. Is Pie without Device Maintenance expected to put applications to sleep? I am guessing sleep is the major factor here (opposed to cleaning up caches and other storage capacity functions of Device Maintenance app).
Click to expand...
Click to collapse
I would like to think so,hoping Device Maintenance isn't ingrained to the level where it breaks the native Doze feature in Android.
JMHO,Device Maintenance seems to be just like Clean Master,running on top of Android/counterproductive,putting a hat on a hat,so to speak,LOL.
I haven't had a Nexus device since the N6 & never had a Pixel,but,I'm pretty sure none of 'em have DM..................................
Whenever I decide to update to Pie,I'm going to continue as I am now:
Battery Optimize all apps that I don't rely on for auto-updating or push notifications & then disabling Device Maintenance.
If something starts acting up,only then do I re-enable DM,take a look at Battery Optimizing for whatever is affected & again,disabling DM.
Guessing you've just recently updated to Pie.......
If it were me,I'd continue to disable DM & give the new OS upgrade a week or so,see what your battery life looks like then.
Battery life loss could be due to some user-installed apps that aren't playing nice w/Pie & not due to DM being disabled.
You will find the logo or text "powered by 360" on storage screen in Samsung device management app.
KOLIOSIS said:
Battery Optimize all apps that I don't rely on for auto-updating or push notifications & then disabling Device Maintenance.
If something starts acting up,only then do I re-enable DM,take a look at Battery Optimizing for whatever is affected & again,disabling DM.
Click to expand...
Click to collapse
I have taken your advise a few weeks ago and have concluded that removing DM whilst manually optimising all individual apps has resulted in no battery loss (in fact it has probably improved but this is within a margin of error). Thanks for your guidance.
Unless you need to connect to a Chinese domain for whatever reason, just block *. cn for good and forever about it.
hello guys i have bought galaxy note 9 in China and there is not preinstalled google play store app...
can anyone tell me how to install safely ))?? thank you ...
hey thanks for your attention but i dont need to access i have vpn i know how to access i want to know how to install because it is not installed so do you have some ideas ?))) how to do it
sandro comaia said:
hey thanks for your attention but i dont need to access i have vpn i know how to access i want to know how to install because it is not installed so do you have some ideas ?))) how to do it
Click to expand...
Click to collapse
Just side-load this .apk & you should be good to go:
https://www.apkmirror.com/apk/googl...5-22-all-0-pr-254908059-android-apk-download/
Was original poster was the only one who had this issue?
Is this a samsung thing or all androids?
Can this be a security risk?
There was a link to the s9 bloatware thread but it doesn't work
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Says 404 not found for me
Nameduser6 said:
Was original poster was the only one who had this issue?
Is this a samsung thing or all androids?
Can this be a security risk?
There was a link to the s9 bloatware thread but it doesn't work
https://forum.xda-developers.com/ga...laxy-note-9-bloatware-removal-thread-t3857508
Says 404 not found for me
Click to expand...
Click to collapse
Should be only Samsung phones. Interestingly i haven't seen it dial home since my original post and up until i uninstalled the Device Care package. Samsung might have changed the domains the tool dials home to.
Sent from my SM-N960F using Tapatalk

Blocking Ads in Apps

Over the weekend, I purchased a Galaxy S10. It’s the Verizon variant and as such wont get root. I’m actually not interested in root as my last phone was missing the last few years updates as I did the Ron Popiel, “Set it and forget it”. I’m all good there and am rather happy with it since I had an S5 running Lollipop.
Before upgrading, I asked some questions regarding whether I needed root as my main desire was to be able to use ad blocking software and block ads in applications. I was told to use Blokada. I’ve installed it and it’s not doing what I expected. What it does:
1. It installed a VPN which I keep having to turn on and off.
2. It does not block ads in all applications.
3. It prevents some apps from working: Spectrum, NFL…
Coming from AdAway, I was looking for a program that ran in the background and simply blocked ads. This program does not and now that it installed a VPN, It’s going to cause trouble for me when I want to use the corporate VPN to access my work computer. Besides, not being unobtrusive, the fact that it’s using a VPN means that whoever built the program now has access to my data stream.
Does some know if maybe I’ve misconfigured the program or if there is another program that I should use to achieve seamless background operation.
Maybe all I need is alterative DNS servers so ads won’t load. I’m not sure what to do.
Use Blokada or Adguard, or at least that's what I've used. I actually use paid version of Adguard but the other works fine
https://blokada.org/index.html
I'm using AdGuard DNS with a Quick Settings toggle I've made with Tasker to enable and disable it on the fly.
No app needed, it's fast and works like a charm even in apps or YouTube.
I need to disable it for public WiFi with login to make the login sites work, only. If I'm logged it I re-enable it.
I was using AdAway before but I wanted to try a rootless phone after I had issues with my USB Port and I like it.
I just tried Blokada again. I found that I could use the DNS frature and be protected from ads, but spectrum tells me, "VPN Unsupported". how do I get around this and not use VPN to block Ads?

Categories

Resources