NF3 is released.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...I9505G_XAR_UCNE3_to_UCNF3_Update_FWD_USER.zip
Root method (does not overwrite stock recovery):
http://www.mediafire.com/download/tnzz95y5847z587/S4_GPE_ROOT.zip
ODIN FULL RECOVER IMAGE (root is built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN 3.09
I9505GUEUCNF3_FULL_ROOTED
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Your a machine man! Great job
Sent from Android Hawaii in the middle of the Pacific Ocean
Thanks. If I wasn't headed out to dinner I'd have it done sooner. Man ART really takes a long time after an update to rebuild the binaries. LOL! But ART is definitely the way to go. Especially in light of the revelation that it's default in Android 5.0.
As promised, full image is up. Enjoy!
Looks like I got the OTA update today. Will it not work since I am rooted from your last full restore for 4.4.3?
It'll work fine if you've not modified anything. I sideloaded it while rooted.
Sent from my GT-I9505G using Tapatalk
Odin full recovery image not available?
It's up there.
Sent from my XT1053 using Tapatalk
SamuriHL said:
NF3 is released.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...I9505G_XAR_UCNE3_to_UCNF3_Update_FWD_USER.zip
Root method (does not overwrite stock recovery):
http://www.mediafire.com/download/tnzz95y5847z587/S4_GPE_ROOT.zip
ODIN FULL RECOVER IMAGE (root is built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
USB Driver and ODIN:
I9505GUEUCNF3_FULL_ROOTED
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Click to expand...
Click to collapse
I must be blind because I'm not seeing it I am on 4.4.3 but modified.
Yes you are missing it. The little link that says full rooted. Don't know what to tell you.
Sent from my XT1053 using Tapatalk
Would you mind posting link please?
Nvm. It is not under the full rooted header but instead the downloads header
Worked like a charm even with CWM and Xposed
Samuri, I am so, so grateful that you keep us updated on the I9505G! Thank you!
Just in case anyone else finds themselves in the same situation as me, I had used Samuri's previous Full Rooted Restore for 4.4.3 with ODIN (here), then installed CWM Recovery (via Heimdall) and installed the Xposed framework. Obviously I could not use the OTA update directly! But using ODIN to get this 4.4.4 image worked just fine.
My steps, in case anyone wants it spelled out:
Uninstalled Xposed framework from within the installer just to be safe. Settings are not removed. This step is likely unnecessary, but can't hurt
Used ODIN to flash the full 4.4.4 rooted image, verified working and rooted
Re-installed CWM via Heimdall. (When rebooting, CWM asks if you want to fix root. Yes)
Re-installed Xposed and rebooted -- previous Xposed settings reactivated with no problems
There were some nandroid backups made along the way as well of course, just to be safe.
The only place I had an issue, this time and the previous time, was finding the right Samsung USB drivers. The ones on the Samsung website are ridiculously out of date and a lot of the links I found were broken or suspicious. Maybe a good driver link is something that can be added to these posts, for people who are starting fresh?
Anyway, thanks again!
I had a link to ODIN and the samsung driver but the site I linked to was serving up malware so I pulled them. I'm hosting my own ODIN link now and I don't have the latest Samsung drivers. I wonder if sammobile has them. I bet it does.
If I uninstall root, will the phone still get the next OTA?
I'm pretty sure, but wanted to be 100% sure. Couldn't find a stock image that I could flash via Odin that wasn't pre-rooted.
Nor will you find a stock ODIN image that isn't rooted because Samsung doesn't release them for us. I have to manually create them. Root and the OTA have absolutely nothing to do with each other. I routinely flash OTA's on mine while rooted. Half the time I don't even lose root by doing so. Whether you choose to leave it or remove it won't have any impact on receiving the next OTA.
SamuriHL said:
I had a link to ODIN and the samsung driver but the site I linked to was serving up malware so I pulled them. I'm hosting my own ODIN link now and I don't have the latest Samsung drivers. I wonder if sammobile has them. I bet it does.
Click to expand...
Click to collapse
Yeah, I noticed the dedicated ODIN link. Thanks for that! Last time around I had a bugger of a time finding 3.09 without malware.
vwlshrtg said:
Yeah, I noticed the dedicated ODIN link. Thanks for that! Last time around I had a bugger of a time finding 3.09 without malware.
Click to expand...
Click to collapse
So I found out while I was on vacation. sigh. The site I was linking to had a malware infected version apparently. I've been using this version without issue for quite some time. It came from this site with all the versions included.
Custom kernel via odin?
Your image worked perfectly; thank you.
Have you ever run across a way to get a custom kernel as a flashable Odin image?
Looking for the alucard kernel..
Thank you sir for any information that you might have.
I imagine you could make a flashable odin image from it. There are some ODIN image tutorials/guides out there that you could follow. I have no experience with that personally.
Unroot S4 USA Google Edition
SamuriHL said:
Yes you are missing it. The little link that says full rooted. Don't know what to tell you.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Do you have a non-rooted version for the US I9505G. I need to return to stock as I have attempted to use "unroot", but Good for Enterprise is still saying my phone is rooted.
Related
NE3 is released.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...USER_I9505G_XAR_UCML4_to_UCNE3_Update_FWD.zip
Root method (does not overwrite stock recovery):
http://www.mediafire.com/download/tnzz95y5847z587/S4_GPE_ROOT.zip
ODIN FULL RECOVER IMAGE (root is built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN 3.09
I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz
A GIANT thank you to @MJHawaii for helping me learn this process!!!
RESERVED
ODIN image is posted. Enjoy!
Flashed and booted without a hitch! Thanks
Not a problem. Enjoy!
Update:
I extracted the file from the 4.2.2 stock system dump and replaced it.
it has a different sha1sum than what was on the device but still i get the same error when sideload the 4.4.3 zip
got error "status 7" when sideload : "/system/bin/debuggerd" has unexpected contents."
can anyone extract the stock debuggerd file so i can replace at (/system/bin) ?
Why are you making your life more difficult than you need? Just flash this odin package and be done with it.
Sent from my SM-P600 using Tapatalk
When you are right you are right
Works
SamuriHL said:
Why are you making your life more difficult than you need? Just flash this odin package and be done with it.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Excellent
Sent from my SM-P600 using Tapatalk
SamuriHL said:
NE3 is released.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
Not posted yet
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...USER_I9505G_XAR_UCML4_to_UCNE3_Update_FWD.zip
Root method (does not overwrite stock recovery):
http://www.mediafire.com/download/tnzz95y5847z587/S4_GPE_ROOT.zip
ODIN FULL RECOVER IMAGE (root is built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
Instructions
1. Download the I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz package from below
2. Make sure you have the USB Drivers installed and you have Odin 3.09
3. Please do not flash this if you're low on battery, Go charge your phone!
4. Open up Odin and click on PDA (or AP in 3.09+), then select the I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz package you downloaded
5. Odin will need to extract the tar md5 file from the gzip archive, and this will take a while
6. This is a massive file give it time to load up in Odin and Make sure you have a COM PORT in Odin ( any )
7. Click Start and wait till it finishes flashing
8. If your phone does not boot right back up then boot into stock recovery and Wipe Data Factory Reset.
I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Click to expand...
Click to collapse
Hi there. I have I S4 9505g. I'm not rooted and fully stock. Can I use Odin with this system image to get root. I have experience with rooting and flashing just new to this device. I'm assuming that I have to go through and root first then put twrp on. Thanks
Sent from my Samsung Galaxy S4 GT-9505g
Great Job SamuriHL I don't have the GPE S4 anymore but I'm glad you are keeping everyone up to date
Sent from my Nexus 5 using Tapatalk
thepindoctor said:
Hi there. I have I S4 9505g. I'm not rooted and fully stock. Can I use Odin with this system image to get root. I have experience with rooting and flashing just new to this device. I'm assuming that I have to go through and root first then put twrp on. Thanks
Sent from my Samsung Galaxy S4 GT-9505g
Click to expand...
Click to collapse
Yes you may. You'll need to install SuperSU from the app store before or after flashing this, but, the su binary is up to date (1.99r3) and ready to go.
Also you could just flash twrp with ODIN before rooting. Either way, this will fix you up.
MJHawaii said:
Great Job SamuriHL I don't have the GPE S4 anymore but I'm glad you are keeping everyone up to date
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks man. Yea, this one took a couple hours longer to post than I'd have liked because of changes they made to the scripts. I had to re-architect my build odin script to reconcile the changes. But the modems, recovery, and full images are all posted. Not too shabby considering it was literally one day after the Nexus devices got their factory images.
My phone is rooted, and I installed Xposed framework. How do I install 4.4.3 without losing everything?
With Odin you lose everything right?
You won't lose your data. But it will overwrite your system partition, yes. You don't have a lot of options if you wanna get to 4.4.3 with the current environment you have on your phone. ODIN is pretty much it.
SamuriHL said:
You won't lose your data. But it will overwrite your system partition, yes. You don't have a lot of options if you wanna get to 4.4.3 with the current environment you have on your phone. ODIN is pretty much it.
Click to expand...
Click to collapse
It is better to do a wipe data, to do a clean install? I'm afraid that Xposed and its modules can cause problems.
Don't know. I don't use xposed at all. Personally if it were me I'd flash it, see if it boots...if not, factory reset it and start over. But I'd at least try to boot it up without wiping data first. I go out of my way in all my utils to make it so users don't have to wipe data so you never know....it could work.
I've updated all my ODIN TAR threads to make it COMPLETELY clear what EVERY step is as it seems it was too difficult to follow.
Thanks. With MJ gone, you are the last Samurai for all i9505g users. We all depend on you now.:good:
Anyway to disable the System Update notification nag? I was using 4.4.2 Automanager, unchecked SystemUpdate but still no luck...
Should be able to freeze the updater apk whatever the file is. I don't know it off the top of my head but look through them and you should find it.
Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware and cannot use the OTA
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download firmware from the centralized location HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
Sand Box
Who can benefit from this?
Anyone who softbricked with access to download mode
Anyone who wants to use the OTA function after root
Anyone who needs to send the phone in for repair
Anyone who wants to be on the most recent firmware
Anyone who wants to downgrade *Unknown at this time downgrade at your own risk
Anyone who wants to return to stock from aosp or aokp
ODIN files/flashing guide
Linux and Mac users must follow the Odin method using the correct PIT file (will upload soon) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3 (AP in odin is PDA in jodin)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin (v3.10.6)
Download extract and install [Unified Driver Installer] (looking for the proper driver, please tell me if you have the latest unified)
Download and extract G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z
Older firmware HERE
Enter Download Mode
If you have Kies installed make sure it is closed (check the task bar) then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked [ ]
Check AP [ ]
Click on [AP] And select the .tar file you just extracted (Only use AP Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash the firmware then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
TWRP Files/flashing guide
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Also download and copy superSu & twrp to your phone if you want root and custom recovery SUPERSU DOWNLOAD AND TWRP-xxxxxxx.zip
Copy SM-G920Txxx-Untouched_Stock_Restore.zip to Phone
Reboot into twrp
For firmware update do not wipe! skip to step 8. If you want untouched stock continue with step 4.
Click [Wipe]
Click [Advanced Wipe] (For full wipe stock restore only)
Select dalvik cache, system, Data and cache
Click the home Icon in the bottom left
Click [Install]
Select SM-G920Txxx-Untouched_Stock_Restore.zip
If you want root and/or twrp add UPDATE-SuperSU-vxxxxx.zip to the queue by touching [Add More Zips]
Repeat for TWRP-xxxxxxx.zip
Swipe to install [====>]
Install will now begin, pure stock: system, kernel, recovery, modem and rpm will be installed
After completion click [wipe cache/dalvik] (do not skip especially if you dirty flashed)
Swipe to wipe [====>]
Click [back]
Click [reboot system] (it might say no os but it is wrong you do have a os click restart anyway) [dirty flash will not have that problem]
If you want internal sd to be formatted do a factory reset in what should now be the stock recovery (if you didn't install the twrp zip)
Reserved
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Can you please post a link for the SM-G925T
TMobile S6 Edge 128GB variant if you know of one.
Added: Odin v3.10.6 and G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5.7z
ThePagel said:
Introduction (will be deleted some time in the next couple days)
Hello everybody, I will be getting this phone next month and look forward to expanding this thread to cover more than just firmware and odin. I have made a few guides and have been told how easy it is to understand and follow compared to others. With that in mind I figured I would just nip this in the butt right now before someone beats me to the punch.
Other than odin I will also for sure be making a back to pure untouched stock for twrp which will flash the following stock images: system, kernel, modem, recovery and if we never see a locked bootloader rpm. This will have to wait until I have the phone because I refuse to make work public unless I have tested it on myself first.
Other than this first part of the op, it should stay more or less the same for the next month. post #2 will have a sandbox for the future of the op then it will turn into a spot to post answers to commonly asked questions.
***********************************************************************************************************
EDIT: REPLY
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse
Docmjldds said:
Would you have a link for the stock SM-G925T tar file for TMobiles S6 Edge 128GB By chance. A Donation on my part would be more than welcome to do for you. PS....I have no clue why I cannot open any link on sammobile web. So a mirror of any sort would be highly appreciated.
Click to expand...
Click to collapse
Ill look into it when I get some free time. Back when I had a s3 I was getting the tar balls without the phone plugged in and without the sammobile site, need to rediscover how I did that.
Fenny said:
Mirror: http://cheatersedge.org/android/G920TUVU1AOCG_G920TTMB1AOCG_TMB.zip
Click to expand...
Click to collapse
Fenny! glad to see you still around, mate :highfive:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
Yes, where is this zip file?
Sent from my SM-G920T using XDA Free mobile app
Fightoffyoredeamons said:
Download your preferred choice of SM-G920Txxx-Untouched_Stock_Restore.zip HERE (Perfect 1:1 image unlike most roms)
Where do I get this?
Click to expand...
Click to collapse
I have yet to throw one together because I like to test that stuff on myself first (not getting the phone until the first). But I have a member willing to test it so if you want in on that youre more than welcome. I should have it done tonight if time allows.
Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app
ledvedder said:
Which stock firmware is this? The original one is 3.5 GB.
Sent from my SM-G920T using XDA Free mobile app
Click to expand...
Click to collapse
Its still the original, just compressed.
You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?
Dr. Fed said:
You recommend JOdin for Linux users. But isn't that just a front end for Heimdall, and Heimdall has not been working on Linux for a while?
Click to expand...
Click to collapse
I thought it got updated, I'll look into it.
Thank you for this. I rooted my phone before I installed the OTA because the TMobile rep told me the latest OTA was bricking phones. Obviously, this was not true and I couldn't update the phone. All is well now.
Would going through the process untrip the KNOX flag from rooting and such?
nolimit78 said:
Would going through the process untrip the KNOX flag from rooting and such?
Click to expand...
Click to collapse
No! Once it's tripped, it's done. No resetting it.
I tried using JOdin last night but it couldn't ever get my PIT file and never restarted my phone. It would just say that it failed. Can I use someone else's PIT file for the same model or does it need to be specific to my phone? SM-G920T is my model, if so.
I tried odin on a friend's windows computer and it never recognized my phone when I plugged it in in download mode. so i'm not sure what is going on. :/
OK1 is released.
NOTE: This image is *NOT* rooted! If you need root, see here.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
https://android.googleapis.com/pack...I9505G_XAR_UDOJ1_to_UDOK1_Update_FWD_USER.zip Thanks @Navitron
ODIN FULL RECOVER IMAGE (root is NOT built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUDxxx_FULL.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUDxxx_FULL.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN 3.09
I9505GUEUDOK1_FULL
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Ok, xda is pissing me off today. It didn't save the update last night with the link, and then it just erased the whole thread a minute ago. ARGH. Sorry guys.
Thank you for another odin recovery image, SamuriHL. Now I can port it to my i9505.
No problem. Enjoy!
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
ODIN FULL RECOVER IMAGES
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUDxxx_FULL.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUDxxx_FULL.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN:
ODIN 3.09
IMAGES:
I9505GUEUBMH1_FULL_ROOTED
I9505GUEUBMH5_FULL_ROOTED
I9505GUEUBMKG_FULL_ROOTED
I9505GUEUBML4_FULL_ROOTED
I9505GUEUCNE3_FULL_ROOTED
I9505GUEUCNF3_FULL_ROOTED
I9505GUEUDNL3_FULL
I9505GUEUDOH2_FULL
I9505GUEUDOJ1_FULL
I9505GUEUDOK1_FULL
I9505GUEUDOL2_FULL
I9505GUEUDPA1_FULL
I9505GUEUDPB1_FULL
I9505GUEUDPC1_FULL
I9505GUEUDPD1_FULL
I9505GUEUDPE1_FULL
I9505GUEUDPF1_FULL
A GIANT thank you to @MJHawaii for helping me learn this process!!!
PB1 February security update posted.
Really appreciated you keep updating this,
^,^
Looks like there is a secret stash for i9505g I will install on my m919 using only system and cache will report back here soon) peace
And keep updating us brother peace!!
There are people out there who maintain roms for other devices by using these ODIN images. They work just fine, but, I do not support them in any way other than posting the images here. I'd prefer to keep this thread specific to the 9505g, however. Otherwise it could confuse people and I don't want anyone on a non-9505g device trying to flash these ODIN images thinking it might work cause it ill brick them. I get what you're going to do, but, others may overlook it.
The original PC1 image was bad. I just now replaced it with a new image, so if you downloaded it before this post was made, redownload it.
This does not include the bootloader?
No, I don't include the bootloader in the image. It's never really been needed for most people.
Great work as always Sam will fix updated version for s4
Sent from my SM-G9350 using Tapatalk
Hi Samuri! Since the may update has appear in my mobile, have you available the correspondent update image?
Cheers
Nope. I've yet to see the update. Once I can get ahold of it, I'll make the image.
PE1 is up now.
I have a problem on all gpe roms, my mobile data never turns off!
After i switch off lte connection it comes back in just a second
No idea.
PF1 is up now, great! Thanks for another release @SamuriHL, my I9505 can still keep going.
You're very welcome. Enjoy!
just found this tread.
sounds good...
these images are very small 669 MB (1,2 GB extracted)
are these Images with no Bloatware..?
some apps includet or blank ??
LtriX said:
just found this tread.
sounds good...
these images are very small 669 MB (1,2 GB extracted)
are these Images with no Bloatware..?
some apps includet or blank ??
Click to expand...
Click to collapse
Contains Google apps only and stock Androidish style
Sent from my ALE-L21 using Tapatalk
Yea these are taken directly from the S4 GPE and created. No bloat other than what Google adds to the images.
better than any custom rom ?
_____________
LtriX
DISCLAIMERI am not responsible for any damage done to your device. The following guide is to be used at your discretion, you are taking the risk of rendering your phone unusable. It is also advised to Factory Reset while following this guide, so backup, backup, backup! Only attempt if you are confident in doing so!
Marshmallow to LollipopA recent development has allowed us to root the G900A/G870A on 5.1.1., which you can find here. There is a guide for G900A users to downgrade from 6.0 to 5.0, but I wanted to provide a guide for Active users to do the same. Once you have downgraded to 5.0, you can root using this new method, or update to 5.1.1 and root. I was regretting my upgrade to MM, it wasn't worth the cost of root and custom roms, so this was exactly what I needed to love this phone again. Now, on to the guide.
Step 1
Download the necessary files using the following links:
G870A OF3 ODIN TARBALL
ODIN 3.11
Step 2
I will make the assumption you have the Samsung USB Drivers installed and can see your phone in File Explorer. Extract both of the downloaded files wherever you'd like, you'll have an Odin folder, and four files from the tarball: BL, AP, CP, and CSC files. Put them in their own folder, just to avoid any mistakes with flashing. Run Odin as Admin and you'll see 4 slots, which you'll fill with the 4 tar.md5 files you just extracted. You'll load the tar files into their appropriate slots, IE AP_* into the AP slot, and you will encounter delays as Odin reads and verifies the files.
Step 3
As a precaution, it's recommended to have your phone charged to at least 75%. Now to restart the phone into Download Mode, you do so by powering off the phone, then power on the phone holding the Volume Down + Home keys. Once in download mode, hook the phone up to your USB cable attached to your PC. (Most failed ODIN flashes are due to USB cables, you may need to try a few)
Step 4
Go back to Odin and you should see your phone show up in COM box. Once you've verified that the phone is showing up, verify that you have all of the tar files loaded into the appropriate slots, and push Start. You'll see the progress as each file is flashed, look for any error messages. Once everything is flashed, your phone should reboot and you'll see a green pass. At this point, I recommend doing a battery pull or hold down Volume Down + Home + Power keys until the phone reboots. Once it shuts off, immediately hold down Volume Up + Home to boot into recovery. Now just do a quick factory reset, wipe the cache, and reboot. You should now be back to OF3, you can verify this in recovery, or by going to About Device under Settings, under baseband it should read G870AUCU2BOF3.
Step 5
At this point, you can use the previously mentioned guide to obtain root. If interested, once you have root you can head over to the Unofficial List of Roms and use FlashFire to flash a shiny new rom.
I'd just like to thank @AptLogic for his contributions, as well as @719c6 for finding the OF3 tarballs.
Thanks a lot! Just wanted to report I downgraded successfully and will try to work on rooting next. Thanks!
Hello,
same here, downgraded via ODIN to 5.0.... I'd really like to update, though but couldnt find the data file yet -
coluld anyone help me with a link to a suitable update file from OF3 to OI5?
Thanks
plx
EDIT: oops, sorry, wasnt OI5 but OJ3 - found and updated...
IJoxer said:
DISCLAIMERI am not responsible for any damage done to your device. The following guide is to be used at your discretion, you are taking the risk of rendering your phone unusable. It is also advised to Factory Reset while following this guide, so backup, backup, backup! Only attempt if you are confident in doing so!
Marshmallow to LollipopA recent development has allowed us to root the G900A/G870A on 5.1.1., which you can find here. There is a guide for G900A users to downgrade from 6.0 to 5.0, but I wanted to provide a guide for Active users to do the same. Once you have downgraded to 5.0, you can root using this new method, or update to 5.1.1 and root. I was regretting my upgrade to MM, it wasn't worth the cost of root and custom roms, so this was exactly what I needed to love this phone again. Now, on to the guide.
Step 1
Download the necessary files using the following links:
G870A OF3 ODIN TARBALL
ODIN 3.11
Step 2
I will make the assumption you have the Samsung USB Drivers installed and can see your phone in File Explorer. Extract both of the downloaded files wherever you'd like, you'll have an Odin folder, and four files from the tarball: BL, AP, CP, and CSC files. Put them in their own folder, just to avoid any mistakes with flashing. Run Odin as Admin and you'll see 4 slots, which you'll fill with the 4 tar.md5 files you just extracted. You'll load the tar files into their appropriate slots, IE AP_* into the AP slot, and you will encounter delays as Odin reads and verifies the files.
Step 3
As a precaution, it's recommended to have your phone charged to at least 75%. Now to restart the phone into Download Mode, you do so by powering off the phone, then power on the phone holding the Volume Down + Home keys. Once in download mode, hook the phone up to your USB cable attached to your PC. (Most failed ODIN flashes are due to USB cables, you may need to try a few)
Step 4
Go back to Odin and you should see your phone show up in COM box. Once you've verified that the phone is showing up, verify that you have all of the tar files loaded into the appropriate slots, and push Start. You'll see the progress as each file is flashed, look for any error messages. Once everything is flashed, your phone should reboot and you'll see a green pass. At this point, I recommend doing a battery pull or hold down Volume Down + Home + Power keys until the phone reboots. Once it shuts off, immediately hold down Volume Up + Home to boot into recovery. Now just do a quick factory reset, wipe the cache, and reboot. You should now be back to OF3, you can verify this in recovery, or by going to About Device under Settings, under baseband it should read G870AUCU2BOF3.
Step 5
At this point, you can use the previously mentioned guide to obtain root. If interested, once you have root you can head over to the Unofficial List of Roms and use FlashFire to flash a shiny new rom.
I'd just like to thank @AptLogic for his contributions, as well as @719c6 for finding the OF3 tarballs.
Click to expand...
Click to collapse
you can help me downgrade s5 active MM 6.0.1 to 4.4 (NE4) with ODIN 4 file (BL, AP, CP, CSC)
tks
anhminhvip said:
you can help me downgrade s5 active MM 6.0.1 to 4.4 (NE4) with ODIN 4 file (BL, AP, CP, CSC)
tks
Click to expand...
Click to collapse
The lowest you can downgrade to is OF3, which you can do by following the guide. The OF3 firmware uses the same bootloader as MM, so we were able to downgrade, NE4 uses an older bootloader, and we are not able to downgrade bootloaders.
Sorry.
How do install superSU on OF3?
anhminhvip said:
How do install superSU on OF3?
Click to expand...
Click to collapse
It was linked in the OP, but it's in this thread. Apparently, they're having an issue getting it to root now, so if you get it to root, report feedback on the thread and make sure to keep it. I was lucky enough to downgrade, root, and flash my favorite rom, Xtrestolite. Finally have my phone running nice and smooth again, I won't be jeopardizing my root on this phone anymore.
Good luck!
I have install sussces kingroot but i replace superSU then it not complete
anhminhvip said:
I have install sussces kingroot but i replace superSU then it not complete
Click to expand...
Click to collapse
Are you using Supersume?
That app (it is paid) automatically uninstalls kingroot and replaces it with supersu, and as far as I know, you have to use it for everything to work properly.
Good luck!
IJoxer said:
Are you using Supersume?
That app (it is paid) automatically uninstalls kingroot and replaces it with supersu, and as far as I know, you have to use it for everything to work properly.
Good luck!
Click to expand...
Click to collapse
I have downgrade 6.0.1 to 5.0 OF3 and root with kingroot again but it faile
anhminhvip said:
I have downgrade 6.0.1 to 5.0 OF3 and root with kingroot again but it faile
Click to expand...
Click to collapse
Yea, refer to the linked root thread in OP, there was some modification to kingroot that broke the exploit. I haven't been there in a few days, not sure if they found a workaround yet.
It's unfortunate, but another method or workaround could pop up anytime.
Sorry.
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any reason as to why its happening?
daunow said:
Any reason as to why its happening?
Click to expand...
Click to collapse
I need more then that to go on. Off the top of my head, I'd recommend a different USB cable and also a verification that the PIT files were downloaded properly, as in, they aren't somehow corrupted.
IJoxer said:
I need more then that to go on. Off the top of my head, I'd recommend a different USB cable and also a verification that the PIT files were downloaded properly, as in, they aren't somehow corrupted.
Click to expand...
Click to collapse
Downloaded the files 3 times, and used 2 different usb.
With this guide could I change from the pb1 update? I'm on a g870a. If so what are my options?
IJoxer said:
DISCLAIMERI am not responsible for any damage done to your device. The following guide is to be used at your discretion, you are taking the risk of rendering your phone unusable. It is also advised to Factory Reset while following this guide, so backup, backup, backup! Only attempt if you are confident in doing so!
Marshmallow to LollipopA recent development has allowed us to root the G900A/G870A on 5.1.1., which you can find here. There is a guide for G900A users to downgrade from 6.0 to 5.0, but I wanted to provide a guide for Active users to do the same. Once you have downgraded to 5.0, you can root using this new method, or update to 5.1.1 and root. I was regretting my upgrade to MM, it wasn't worth the cost of root and custom roms, so this was exactly what I needed to love this phone again. Now, on to the guide.
Step 1
Download the necessary files using the following links:
G870A OF3 ODIN TARBALL
ODIN 3.11
Step 2
I will make the assumption you have the Samsung USB Drivers installed and can see your phone in File Explorer. Extract both of the downloaded files wherever you'd like, you'll have an Odin folder, and four files from the tarball: BL, AP, CP, and CSC files. Put them in their own folder, just to avoid any mistakes with flashing. Run Odin as Admin and you'll see 4 slots, which you'll fill with the 4 tar.md5 files you just extracted. You'll load the tar files into their appropriate slots, IE AP_* into the AP slot, and you will encounter delays as Odin reads and verifies the files.
Step 3
As a precaution, it's recommended to have your phone charged to at least 75%. Now to restart the phone into Download Mode, you do so by powering off the phone, then power on the phone holding the Volume Down + Home keys. Once in download mode, hook the phone up to your USB cable attached to your PC. (Most failed ODIN flashes are due to USB cables, you may need to try a few)
Step 4
Go back to Odin and you should see your phone show up in COM box. Once you've verified that the phone is showing up, verify that you have all of the tar files loaded into the appropriate slots, and push Start. You'll see the progress as each file is flashed, look for any error messages. Once everything is flashed, your phone should reboot and you'll see a green pass. At this point, I recommend doing a battery pull or hold down Volume Down + Home + Power keys until the phone reboots. Once it shuts off, immediately hold down Volume Up + Home to boot into recovery. Now just do a quick factory reset, wipe the cache, and reboot. You should now be back to OF3, you can verify this in recovery, or by going to About Device under Settings, under baseband it should read G870AUCU2BOF3.
Step 5
At this point, you can use the previously mentioned guide to obtain root. If interested, once you have root you can head over to the Unofficial List of Roms and use FlashFire to flash a shiny new rom.
I'd just like to thank @AptLogic for his contributions, as well as @719c6 for finding the OF3 tarballs.
Click to expand...
Click to collapse
Please, i want to know, does root work on this? I need root for my device. Thank
Just want to check, but for obtaining root I would follow Steps 1-6 in the OP linked guide and then do I follow through with Step 7 (flash 900a PreRooted OF3 ROM -- as described in the link) or do I jump straight to a new custom ROM?
If it helps, I'm trying to flash this ROM (XtreStoLite) to my 870a, which should work based on this post
,,,,
Sent from my SM-G550T1 using XDA-Developers Legacy app
Im already on OF3, but when I try to install the "combination" file from the guide you mention, ODIN doesnt install anything, tried different PC , usb ports, and usb cables aswell. is this the only way to get root? I mean it would be easier if we had a TWRP working for our device.
That's not for the active. It's for the 900A
Sent from my SAMSUNG-SM-G870A using XDA-Developers Legacy app